| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A memory corruption vulnerability caused by improper validation of messages |
| In the Exynos modem's IMS stack, Out of Bound access occurs due to improper validation. |
| STMicroelectronics st-mems-android-linux-sensors-hal before 7bdf334 does not check whether the allowed number of channels is exceeded. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: Place upper limit on station AID
Any station configured with an AID over 20 causes a firmware crash.
This situation occurred in our testing using an AP interface on 7922
hardware, with a modified hostapd, sourced from Mediatek's OpenWRT
feeds.
In stock hostapd, station AIDs begin counting at 1, and this
configuration is prevented with an upper limit on associated stations.
However, the modified hostapd began allocation at 65, which caused the
firmware to crash. This fix does not allow these AIDs to work, but will
prevent the firmware crash.
This crash was only seen on IFTYPE_AP interfaces, and the fix does not
appear to have an effect on IFTYPE_STATION behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sg: Resolve soft lockup issue when opening /dev/sgX
The parameter def_reserved_size defines the default buffer size reserved
for each Sg_fd and should be restricted to a range between 0 and 1,048,576
(see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the
function sg_proc_write_dressz enforces this limit, it is possible to bypass
it by directly modifying the module parameter as shown below, which then
causes a soft lockup:
echo -1 > /sys/module/sg/parameters/def_reserved_size
exec 4<> /dev/sg0
watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537]
Modules loaded:
CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134,
PREEMPT disabled
Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version
1.16.1-2.fc37 dated 04/01/2014
...
Call Trace:
sg_build_reserve+0x5c/0xa0
sg_add_sfp+0x168/0x270
sg_open+0x16e/0x340
chrdev_open+0xbe/0x230
do_dentry_open+0x175/0x480
vfs_open+0x34/0xf0
do_open+0x265/0x3d0
path_openat+0x110/0x290
do_filp_open+0xc3/0x170
do_sys_openat2+0x71/0xe0
__x64_sys_openat+0x6d/0xa0
do_syscall_64+0x62/0x310
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The fix is to use module_param_cb to validate and reject invalid values
assigned to def_reserved_size. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
net/bluetooth/l2cap_core.c:l2cap_sig_channel() accepts BR/EDR
signaling packets up to the channel MTU and dispatches each command
without enforcing the signaling MTU (MTUsig). A Bluetooth BR/EDR peer
within radio range can send a fixed-channel CID 0x0001 packet that is
larger than MTUsig and contains many L2CAP_ECHO_REQ commands before
pairing. In a real-radio stock-kernel run, one 681-byte signaling
packet containing 168 zero-length ECHO_REQ commands made the target
transmit 168 ECHO_RSP frames over about 220 ms.
Impact: a Bluetooth BR/EDR peer within radio range, before pairing, can
force 168 ECHO_RSP frames from one 681-byte fixed-channel signaling
packet containing packed ECHO_REQ commands.
Define Linux's BR/EDR signaling MTU as the spec minimum of 48 bytes and
reject any larger signaling packet with one L2CAP_COMMAND_REJECT_RSP
carrying L2CAP_REJ_MTU_EXCEEDED before any command is dispatched.
The Bluetooth Core spec wording for MTUExceeded says the reject
identifier shall match the first request command in the packet, and
that packets containing only responses shall be silently discarded.
Linux intentionally deviates from that prescription: silently
discarding desynchronizes the peer because the remote stack never
learns its responses were dropped, and locating the first request
command requires walking command headers past MTUsig, i.e. processing
bytes from a packet we have already decided is too large to process.
We therefore always emit one reject and use the identifier from the
first command header, a single fixed-offset byte read.
The unrestricted BR/EDR signaling parser and ECHO_REQ response path both
trace to the initial git import; no later introducing commit is
available for a Fixes tag. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Clamp VBIOS HDMI retimer register count to array size
[Why & How]
The VBIOS integrated info tables (v1_11 and v2_1) contain HdmiRegNum and
Hdmi6GRegNum fields that are used as loop bounds when copying retimer I2C
register settings into fixed-size arrays (dp*_ext_hdmi_reg_settings[9]
and dp*_ext_hdmi_6g_reg_settings[3]). These u8 fields are not validated
before use, so a malformed VBIOS can specify values up to 255, causing an
out-of-bounds heap write during driver probe.
Clamp each register count to the destination array size using min_t()
before the copy loops, in both get_integrated_info_v11() and
get_integrated_info_v2_1().
(cherry picked from commit 5a7f0ef90195940c54b0f5bb85b87da55f038c69) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
bpf_prog_test_run_skb() calls eth_type_trans() first and then uses
skb->protocol to initialize sk family and address fields for the test
run.
For IPv4 and IPv6 packets, it may access ip_hdr(skb) or ipv6_hdr(skb)
even when the provided test input only contains an Ethernet header.
Reject the input earlier if the Ethernet frame carries IPv4/IPv6
EtherType but the L3 header is too short.
Fold the IPv4/IPv6 header length checks into the existing protocol
switch and return -EINVAL before accessing the network headers. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Bound MIDI 2.0 endpoint descriptor scans
The USB MIDI 2.0 endpoint parser has the same descriptor walking
pattern as the legacy MIDI parser. It validates bLength against
bNumGrpTrmBlock before reading baAssoGrpTrmBlkID[], but not against the
remaining bytes in the endpoint-extra scan.
A malformed device can therefore make later baAssoGrpTrmBlkID[] reads
consume bytes past the walked descriptor.
Reject zero-length and overlong descriptors while walking endpoint
extras. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix zero-size GDS range init on RDNA4
RDNA4 (GFX 12) hardware removes the GDS, GWS, and OA on-chip memory
resources. The gfx_v12_0 initialisation code correctly leaves
adev->gds.gds_size, adev->gds.gws_size, and adev->gds.oa_size at
zero to reflect this.
amdgpu_ttm_init() unconditionally calls amdgpu_ttm_init_on_chip() for
each of these resources regardless of size. When the size is zero,
amdgpu_ttm_init_on_chip() forwards the call to ttm_range_man_init(),
which calls drm_mm_init(mm, 0, 0). drm_mm_init() immediately fires
DRM_MM_BUG_ON(start + size <= start) -- trivially true when size is
zero -- crashing the kernel during modprobe of amdgpu on an RX 9070 XT.
Guard against this by returning 0 early from
amdgpu_ttm_init_on_chip() when size_in_page is zero. This skips TTM
resource manager registration for hardware resources that are absent,
without affecting any other GPU type.
DRM_MM_BUG_ON() only asserts if CONFIG_DRM_DEBUG_MM is enabled in
the kernel config. This is apparently rarely enabled as these chips
have been in the market for over a year and this issue was only reported
now.
Oops-Analysis: http://oops.fenrus.org/reports/bugzilla.korg/221376/report.html
(cherry picked from commit 5719ce5865279cad4fd5f01011fe037168503f2d) |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: authencesn - reject short ahash digests during instance creation
authencesn requires either a zero authsize or an authsize of at least
4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of
high-order sequence number data at the end of the authenticated data.
While crypto_authenc_esn_setauthsize() already rejects explicit
non-zero authsizes in the range 1..3, crypto_authenc_esn_create()
still copied auth->digestsize into inst->alg.maxauthsize without
validating it. The AEAD core then initialized the tfm's default
authsize from that value.
As a result, selecting an ahash with digest size 1..3, such as
cbcmac(cipher_null), exposed authencesn instances whose default
authsize was invalid even though setauthsize() would have rejected the
same value. AF_ALG could then trigger the ESN tail handling with a
too-short tag and hit an out-of-bounds access.
Reject authencesn instances whose ahash digest size is in the invalid
non-zero range 1..3 so that no tfm can inherit an unsupported default
authsize. |
| dcmjs is a JavaScript implementation of DICOM manipulation. Prior to 0.52.0, the DecimalString and IntegerString implementations in src/ValueRepresentation.js sanitize text with a permissive regular expression and pass the result to JavaScript's Number constructor without validating finiteness or the DICOM value-representation rules. Scientific notation overflow in a DS or IS field can produce positive or negative Infinity, while stripping alphabetic characters from signed infinity text can leave a sign-only string that converts to NaN. IntegerString also accepts exponent notation and values outside the DICOM signed 32-bit IS range. Applications that trust these parsed values can propagate invalid numbers into spatial geometry, display windowing, dose scaling, frame counts, rescaling, or volume reconstruction, causing incorrect calculations or disrupted processing. This issue is fixed in version 0.52.0. |
| A stack-based buffer overflow in Thales SafeNet Authentication Client (SAC) SIS token engine processing can be triggered by a malicious physical or software-emulated smart card. The issue can occur before authentication or PIN entry and may
cause a denial of service or potentially arbitrary code execution with the privileges of the affected process. Affected releases start with SAC 10.8 R7 and include SAC 10.9 R3 GA (build 10.9.7449). |
| In the Linux kernel, the following vulnerability has been resolved:
net: remove WARN_ON_ONCE when accessing forward path array
Although unlikely, recent support for IPIP tunnels increases chances of
reaching this WARN_ON_ONCE if userspace manages to build a sufficiently
long forward path.
Remove it. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix divide-by-zero in tipc_sk_filter_connect()
A user can set conn_timeout to any value via
setsockopt(TIPC_CONN_TIMEOUT), including values less than 4. When a
SYN is rejected with TIPC_ERR_OVERLOAD and the retry path in
tipc_sk_filter_connect() executes:
delay %= (tsk->conn_timeout / 4);
If conn_timeout is in the range [0, 3], the integer division yields 0,
and the modulo operation triggers a divide-by-zero exception, causing a
kernel oops/panic.
Fix this by clamping conn_timeout to a minimum of 4 at the point of use
in tipc_sk_filter_connect().
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 119 Comm: poc-F144 Not tainted 7.0.0-rc2+
RIP: 0010:tipc_sk_filter_rcv (net/tipc/socket.c:2236 net/tipc/socket.c:2362)
Call Trace:
tipc_sk_backlog_rcv (include/linux/instrumented.h:82 include/linux/atomic/atomic-instrumented.h:32 include/net/sock.h:2357 net/tipc/socket.c:2406)
__release_sock (include/net/sock.h:1185 net/core/sock.c:3213)
release_sock (net/core/sock.c:3797)
tipc_connect (net/tipc/socket.c:2570)
__sys_connect (include/linux/file.h:62 include/linux/file.h:83 net/socket.c:2098) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: add upper bound check on user inputs in signal ioctl
Huge input values in amdgpu_userq_signal_ioctl can lead to a OOM and
could be exploited.
So check these input value against AMDGPU_USERQ_MAX_HANDLES
which is big enough value for genuine use cases and could
potentially avoid OOM.
(cherry picked from commit be267e15f99bc97cbe202cd556717797cdcf79a5) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate user queue size constraints
Add validation to ensure user queue sizes meet hardware requirements:
- Size must be a power of two for efficient ring buffer wrapping
- Size must be at least AMDGPU_GPU_PAGE_SIZE to prevent undersized allocations
This prevents invalid configurations that could lead to GPU faults or
unexpected behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: validate ND option lengths in vxlan_na_create
vxlan_na_create() walks ND options according to option-provided
lengths. A malformed option can make the parser advance beyond the
computed option span or use a too-short source LLADDR option payload.
Validate option lengths against the remaining NS option area before
advancing, and only read source LLADDR when the option is large enough
for an Ethernet address. |
| In Vulnerability-Lookup 5.5.1 up to but not including 6.4.1, a signed-in user could make the server allocate memory far out of proportion to their input through a webhook notification's payload template. Each placeholder's format specifier was passed unchanged to Python's string formatting, which builds the padded result before its size can be checked. A template of a few dozen bytes, such as {"text": "{title:>999999999}"}, therefore produced a string of about 1 GB when the notification form test-rendered it on save, and repeating such fields multiplied the cost. Templates that passed the save check could also repeat placeholders such as {text} thousands of times; the notification daemon rebuilt those on every webhook delivery. Deeply nested templates raised an unhandled recursion error (HTTP 500). An attacker needs only an account, which the default configuration lets anyone create after e-mail confirmation. They could exhaust the memory of web workers or the notification daemon, causing a denial of service. Version 6.4.1 caps every number in a format specifier at 256, limits a rendered template to 1,000,000 characters both on save and at delivery, and rejects templates nested deeper than 32 levels. |
| When a broker decodes a compressed record batch, the per-record decoder reads a declared body size from the decompressed stream and allocates a buffer of that size before validating it against the bytes available or any configured limit. The size is attacker-controlled, and the batch CRC does not constrain it, so a small (around 90-byte), CRC-valid compressed produce request can declare a body size of up to about 2 GiB and force the broker to attempt that allocation, raising OutOfMemoryError. The record size limit (max.message.bytes), the request size limit, and client/broker quotas bound only the compressed wire size, not the declared decompressed size.
Impact:
An authenticated principal with Write on a topic can crash broker request-handler threads (reached when a batch's codec differs from the topic's compression.type and records are re-encoded) and any consumer that fetches the record, denying service. On brokers started with -XX:+ExitOnOutOfMemoryError, a common hardening, a single crafted request terminates the broker JVM. More seriously, a crafted record is accepted at ingest and written to disk; when the log-cleaner later reads it on a compacted topic, the OutOfMemoryError (an Error, not an Exception) terminates the cleaner thread, which is not restarted. With the default of a single cleaner thread, log compaction then stops for the entire broker, including the internal __consumer_offsets and __transaction_state topics, and the condition persists across restarts until the offending record is removed. The impact is availability only; no data is disclosed or altered.
Mitigation:
Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0, and set max.decompressed.message.bytes (at the broker and/or topic level) to a bounded value appropriate for your workload. Upgrading alone is not sufficient: for backward compatibility this configuration defaults to an effectively unlimited value (about 2 GiB), so a broker remains exposed until the limit is set. Choose a value at or slightly above the largest legitimate decompressed record your applications produce, and comfortably below the broker heap divided by the number of request-handler and cleaner threads. Until you can upgrade and configure the limit, restrict Write access to trusted producers; quotas and max.message.bytes do not mitigate this issue.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: the broker validates a record's declared decompressed body size against max.decompressed.message.bytes before allocating, on the produce-validation, log-compaction, and timestamp-lookup paths, and rejects oversized or negative sizes with InvalidRecordException. Operators must set this configuration to a bounded value to be protected, as its default is effectively unlimited. |
