| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: drain session procfs readers before dropping table references
Session registration failure and connection cleanup can drop the table
reference while the per-session procfs entry is still accessible. If a
reader holds the last remaining reference, its final put calls
proc_remove() from its own callback and waits for that callback to
finish.
Remove the procfs entry before dropping the table reference in the
registration failure path. Queue sessions removed during connection
cleanup and drain their procfs readers after releasing both session
locks, then return their table references. Keep the global hash node
unhashed while a session is queued so a concurrent unregister cannot
drop the reference again.
Previous-session replacement also destroys the file table before the
session is finally freed. Detach the idr under the lock used by procfs
file counters, and report zero files after it has been detached. This
prevents a reader from accessing the idr during or after its
destruction. |
| A race condition occurred between the functions lmLogClose and txEnd in JFS, in the Linux Kernel, executed in different threads. This flaw allows a local attacker with normal user privileges to crash the system or leak internal kernel information. |
| A flaw was found in pfn_swap_entry_to_page in memory management subsystem in the Linux Kernel. In this flaw, an attacker with a local user privilege may cause a denial of service problem due to a BUG statement referencing pmd_t x. |
| A flaw was found in the subsequent get_user_pages_fast in the Linux kernel’s interface for symmetric key cipher algorithms in the skcipher_recvmsg of crypto/algif_skcipher.c function. This flaw allows a local user to crash the system. |
| A flaw was found in the Netfilter subsystem of the Linux kernel. A race condition between IPSET_CMD_ADD and IPSET_CMD_SWAP can lead to a kernel panic due to the invocation of `__ip_set_put` on a wrong `set`. This issue may allow a local user to crash the system. |
| A race condition flaw was found in sssd where the GPO policy is not consistently applied for authenticated users. This may lead to improper authorization issues, granting or denying access to resources inappropriately. |
| A race condition was found in the QXL driver in the Linux kernel. The qxl_mode_dumb_create() function dereferences the qobj returned by the qxl_gem_object_create_with_handle(), but the handle is the only one holding a reference to it. This flaw allows an attacker to guess the returned handle value and trigger a use-after-free issue, potentially leading to a denial of service or privilege escalation. |
| IBM API Connect 12.1.0.0 through 12.1.1.2 could allow a remote authenticated attacker to bypass authentication due to improper certificate validation. A certificate check is not performed reliably in all cases, which could allow a connection to be accepted without proper authentication. |
| A race condition vulnerability was found in the vmwgfx driver in the Linux kernel. The flaw exists within the handling of GEM objects. The issue results from improper locking when performing operations on an object. This flaw allows a local privileged user to disclose information in the context of the kernel. |
| A security regression (CVE-2006-5051) was discovered in OpenSSH's server (sshd). There is a race condition which can lead sshd to handle some signals in an unsafe manner. An unauthenticated, remote attacker may be able to trigger it by failing to authenticate within a set time period. |
| OpenVPN ovpn-dco-win 0.6.5 through 2.8.13 allows unprivileged local users to cause a denial of service (system crash) via a race condition in the TCP connect path. |
| The vulnerability is a Use-After-Free (UAF) in the EVS AIDL HAL, arising from a data race on an unsynchronized `std::weak_ptr` within `EvsEnumerator::openCamera()`. Specifically, concurrent calls from a privileged UID (e.g., `AID_AUTOMOTIVE_EVS`) can cause a torn `weak_ptr` state, leading to a virtual call through a freed object's vtable at `cameraObj->getCameraInfo(&desc)`. This allows for potential arbitrary code execution within the `hal_evs_default` process. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mlx5: Properly support implicit ODP rereg_mr
Due to all the child mkeys in the implicit ODP configuration we cannot
change anything in place for the parent mkey. Instead the whole thing
needs to be rebuilt if any change is requested. If the user does not
specify a translation then force the implicit values which will then fall
through the logic into mlx5_ib_reg_user_mr() to allocate a completely new
MR.
Since implicit children were also touching the mr->pd, this removes
another case where the access was racy. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent robust futex exit race some more
A robust futex unlock stores 0 over the whole futex value - wiping
FUTEX_WAITERS - and wakes a single waiter. That wakeup is a one-shot
notification: the protocol relies on its recipient to either acquire the
futex (and eventually unlock while aware of the remaining contention) or
re-arm FUTEX_WAITERS before sleeping again. If the woken waiter is killed
before it can do either, the kernel must jump in and wake the next task
down the line.
This is a known complication of the futex protocol with a previous
partial fix in commit ca16d5bee598 ("futex: Prevent robust futex exit
race"). Unfortunately, that fix is insufficient.
If a third task re-acquired the futex through the uncontended fast
path in the meantime, the notification is lost: robust exit processing
sees that it is owned by another task and does nothing, while the new
owner sees no FUTEX_WAITERS when it unlocks and wakes nobody.
The remaining waiters sleep forever behind a free futex:
A owns the futex, B and C sleep in FUTEX_WAIT
uval == A | FUTEX_WAITERS
A robust unlock: store 0, FUTEX_WAKE(1) wakes B
uval == 0
D fast path acquire: cmpxchg(0 -> D)
uval == D, no FUTEX_WAITERS
B killed before acting on the wakeup
B exit walk, pending op: owner D != B -> no action
D unlock: no FUTEX_WAITERS -> no wake
C sleeps forever
This is clearly a shortcoming in the implementation, which fails to keep
the FUTEX_WAITERS bit consistent.
Work around this by augmenting the robust list exit processing to also
perform the extra wakeup if the futex word is owned by another thread but
FUTEX_WAITERS is not set.
This does not fix the problem of a non-contended take over/release and free
sequence, which has been discussed for years and has been addressed by
commit 3ca9595d9fb6 ("futex: Add support for unlocking robust futexes") and
subsequent changes, but failed to take the problem described above into
account.
A more complete solution which is based on the in kernel unlock of
contended robust futexes has been discussed in the context of this change
and should show up in mainline sooner than later.
[ tglx: Amend change log slightly and fixup coding style ] |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: Fix race in vduse_dev_msg_sync and vduse_dev_read_iter
There is one race case in vduse_dev_msg_sync and vduse_dev_read_iter:
vduse_dev_read_iter():
lock(msg_lock);
dequeue_msg(send_list);
unlock(msg_lock);
vduse_dev_msg_sync():
wait_timeout() finish
lock(msg_lock);
check msg->complete is false
list_del(msg); <- double list_del() crash!
To fix this case, we shall ensure vduse_msg is on send_list or recv_list
outside the msg_lock critical section. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: atm: ueagle-atm: wait for pre-firmware load in .disconnect()
ueagle-atm uses the asynchronous request_firmware_nowait() in .probe(),
but does not wait for its completion, not even in .disconnect(); so, if the
device is unplugged meanwhile, its teardown runs concurrently with that.
Even though this inconsistency is worth addressing on its own, it has also
triggered several bug reports in syzbot over the years (some auto-closed)
where the firmware sysfs fallback mechanism (CONFIG_FW_LOADER_USER_HELPER)
creates a firmware subdirectory in the device directory during its removal,
which might hit unexpected conditions in kernfs, apparently, depending at
which point the add and remove operations raced. (See links.)
The pattern is:
usb ?-?: Direct firmware load for ueagle-atm/eagle?.fw failed with error -2
usb ?-?: Falling back to sysfs fallback for: ueagle-atm/eagle?.fw
<ERROR>
Call trace:
...
kernfs_create_dir_ns
sysfs_create_dir_ns
create_dir
kobject_add_internal
kobject_add_varg
kobject_add
class_dir_create_and_add
get_device_parent
device_add
fw_load_sysfs_fallback
fw_load_from_user_helper
firmware_fallback_sysfs
_request_firmware
request_firmware_work_func
...
(Some variations are observed, after fw_load_sysfs_fallback(), e.g., [1].)
While the kernfs side is being looked at, the ueagle-atm side can be fixed
by waiting for the pre-firmware load in the .disconnect() handler.
This change has a similar approach to previous work by Andrey Tsygunka [2]
(wait_for_completion() in .disconnect()), but it is relatively different in
design/implementation; using the Originally-by tag for credit assignment.
This has been tested with:
- synthetic reproducer to check the error path;
- USB gadget (virtual device) to check the firmware upload path;
- QEMU device emulator to check the device ID re-enumeration path;
(The latter two were written by Claude; no other code/text in this commit.)
Links (year first reported):
2025 https://syzbot.org/bug?extid=ce1e5a1b4e086b43e56d
2025 https://syzbot.org/bug?extid=9af8471255ac36e34fd4
2024 https://syzbot.org/bug?extid=306212936b13e520679d
2023 https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2
2022 https://syzbot.org/bug?extid=782984d6f1701b526edb
2021 https://syzbot.org/bug?id=f3f221579f4ef7e9691281f3c6f56c05f83e8490
2021 https://syzbot.org/bug?id=84d86f0d71394829df6fc53daf6642c045983881
2021 https://syzbot.org/bug?id=3302dc1c0e2b9c94f2e8edb404eabc9267bc6f90
[1] https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2
[2] https://lore.kernel.org/lkml/20250410093146.3776801-2-aitsygunka@yandex.ru/ |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: VMX: Grab vmcs12 on CR8 interception update iff vCPU is in guest mode
When updating CR8 intercepts, get vmcs12 if and only if the vCPU is in
guest mode so that a future change can have update CR8 intercepts during
vCPU creation, without running afoul of get_vmcs12()'s lockdep assertion.
------------[ cut here ]------------
debug_locks && !(lock_is_held(&(&vcpu->mutex)->dep_map) || !refcount_read(&vcpu->kvm->users_count))
WARNING: arch/x86/kvm/vmx/nested.h:61 at get_vmcs12 arch/x86/kvm/vmx/nested.h:60 [inline], CPU#0: syz.2.19/5879
WARNING: arch/x86/kvm/vmx/nested.h:61 at vmx_update_cr8_intercept+0x3de/0x4e0 arch/x86/kvm/vmx/vmx.c:6879, CPU#0: syz.2.19/5879
Modules linked in:
CPU: 0 UID: 0 PID: 5879 Comm: syz.2.19 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:get_vmcs12 arch/x86/kvm/vmx/nested.h:60 [inline]
RIP: 0010:vmx_update_cr8_intercept+0x3de/0x4e0 arch/x86/kvm/vmx/vmx.c:6879
Call Trace:
<TASK>
apic_update_ppr arch/x86/kvm/lapic.c:984 [inline]
kvm_lapic_reset+0x1c24/0x2980 arch/x86/kvm/lapic.c:3023
kvm_vcpu_reset+0x44c/0x1bf0 arch/x86/kvm/x86.c:12986
kvm_arch_vcpu_create+0x746/0x8b0 arch/x86/kvm/x86.c:12847
kvm_vm_ioctl_create_vcpu+0x428/0x930 virt/kvm/kvm_main.c:4201
kvm_vm_ioctl+0x893/0xd50 virt/kvm/kvm_main.c:5159
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
No functional change intended. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: avoid kobject path lookup in DualSense match
The DualSense jack-detection input handler verifies that a matching input
device belongs to the same physical controller by building kobject path
strings for both the input device and the USB audio device, then comparing
the path prefix.
This was observed when a weak physical connection caused the controller
to rapidly disconnect and reconnect. During that repeated hotplug,
snd_dualsense_ih_match() can run while the controller's USB device is
being disconnected. kobject_get_path() walks ancestor kobjects and
dereferences their names; if the USB device kobject name is no longer
valid, this can fault in strlen():
RIP: 0010:strlen+0x10/0x30
Call Trace:
kobject_get_path+0x34/0x150
snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio]
input_register_device+0x566/0x6a0
ps_probe+0xb89/0x1590 [hid_playstation]
The same ownership check can be done without building kobject path
strings. The input device is parented below the HID device, USB interface
and USB device, so walking the input device parent chain and comparing
against the mixer USB device preserves the check without dereferencing
kobject names during disconnect. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: Fix hotplug-suspend race during reboot
During system reboot, cpufreq_suspend() is called via the
kernel_restart() -> device_shutdown() path. Unlike the normal system
suspend path, the reboot path does not call freeze_processes(), so
userspace processes and kernel threads remain active.
This allows CPU hotplug operations to run concurrently with
cpufreq_suspend(). The original code has no synchronization with CPU
hotplug, leading to a race condition where governor_data can be freed
by the hotplug path while cpufreq_suspend() is still accessing it,
resulting in a null pointer dereference:
Unable to handle kernel NULL pointer dereference
Call Trace:
do_kernel_fault+0x28/0x3c
cpufreq_suspend+0xdc/0x160
device_shutdown+0x18/0x200
kernel_restart+0x40/0x80
arm64_sys_reboot+0x1b0/0x200
Fix this by adding cpus_read_lock()/cpus_read_unlock() to
cpufreq_suspend() to block CPU hotplug operations while suspend is in
progress.
[ rjw: Changelog edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
signal: clear JOBCTL_PENDING_MASK for caller in zap_other_threads()
When a multi-threaded process receives a stop signal (e.g., SIGSTOP),
do_signal_stop() sets JOBCTL_STOP_PENDING and JOBCTL_STOP_CONSUME on all
threads and sets signal->group_stop_count to the number of threads. If
one of the threads concurrently calls execve(), de_thread() invokes
zap_other_threads() to kill all other threads. zap_other_threads()
aborts the pending group stop by resetting signal->group_stop_count to 0
and clears the JOBCTL_PENDING_MASK for all other threads. However, it
fails to clear the job control flags for the calling thread.
When execve() completes, the calling thread returns to user mode and
checks for pending signals. Seeing the stale JOBCTL_STOP_PENDING flag,
it calls do_signal_stop(), which invokes task_participate_group_stop().
Since JOBCTL_STOP_CONSUME is still set, it attempts to decrement the
already-zero signal->group_stop_count, triggering a warning:
sig->group_stop_count == 0
WARNING: CPU: 1 PID: 6475 at kernel/signal.c:373
task_participate_group_stop+0x215/0x2d0
Call Trace:
<TASK>
do_signal_stop+0x3be/0x5c0 kernel/signal.c:2619
get_signal+0xa8c/0x1330 kernel/signal.c:2884
arch_do_signal_or_restart+0xbc/0x840 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop+0x8c/0x4d0 kernel/entry/common.c:98
do_syscall_64+0x33e/0xf80 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this race condition by clearing the JOBCTL_PENDING_MASK for the
calling thread in zap_other_threads(), ensuring it does not retain any
stale job control state after the thread group is destroyed. This aligns
with other functions that tear down a thread group and abort group
stops, such as zap_process() and complete_signal(), which correctly
clear these flags for all threads including the current one. |
