Export limit exceeded: 421036 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (845 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-3750 | 1 Redhat | 4 Advanced Virtualization, Enterprise Linux, Libvirt and 1 more | 2026-11-07 | 6.5 Medium |
| A flaw was found in libvirt. The virStoragePoolObjListSearch function does not return a locked pool as expected, resulting in a race condition and denial of service when attempting to lock the same object from another thread. This issue could allow clients connecting to the read-only socket to crash the libvirt daemon. | ||||
| CVE-2023-33951 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Enterprise Linux For Real Time and 3 more | 2026-11-06 | 6.7 Medium |
| A race condition vulnerability was found in the vmwgfx driver in the Linux kernel. The flaw exists within the handling of GEM objects. The issue results from improper locking when performing operations on an object. This flaw allows a local privileged user to disclose information in the context of the kernel. | ||||
| CVE-2026-80904 | 1 Linux | 1 Linux Kernel | 2026-11-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/tls: Fail tls_sw_splice_read() after a failed async decrypt When an async decrypt fails, tls_decrypt_done() records the error in ctx->async_wait.err and calls tls_err_abort(), which stores it in sk_err. tls_sw_recvmsg() and tls_sw_read_sock() each read async_wait.err once they hold the reader lock and fail the call: a record that did not authenticate breaks the connection. tls_sw_splice_read() has no such check, and sk_err does not stand in for one. tls_rx_rec_wait() tests sk_err only inside the loop it skips whenever a record is already parsed, and the first reader to reach sock_error() clears it, while async_wait.err persists. A splice therefore keeps delivering records on a connection that recvmsg() and read_sock() refuse to read. Read async_wait.err in tls_sw_splice_read() as the other two readers do. | ||||
| CVE-2026-64347 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler The OTG branch of composite_setup() falls back to the first configuration when none is selected: if (cdev->config) config = cdev->config; else config = list_first_entry(&cdev->configs, struct usb_configuration, list); if (!config) goto done; ... memcpy(req->buf, config->descriptors[0], value); list_first_entry() never returns NULL. On an empty list it returns container_of() of the list head. So the "if (!config)" check is dead. When cdev->configs is empty, config points at the head inside struct usb_composite_dev. config->descriptors[0] reads whatever sits at that offset. The memcpy copies up to w_length bytes of it into the response buffer. cdev->configs can be empty in two cases. One is a teardown race on gadget unbind with a control transfer in flight. The other is a driver that sets is_otg before it adds a config. A reproducer that holds cdev->configs empty triggers a KASAN fault in this branch. Use list_first_entry_or_null() so the existing check does its job. | ||||
| CVE-2026-64334 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix hard lockup on disconnect If submitting the OOB write urb fails persistently (e.g if the device is being disconnected) the driver would loop indefinitely with interrupts disabled. Check for urb submission errors when sending OOB commands to avoid hanging if, for example, open(), set_termios() or close() races with a physical disconnect. This is issue was flagged by Sashiko when reviewing an unrelated change to the driver. | ||||
| CVE-2026-64171 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: tegra: fix pm_runtime leak on mutex_lock failure If tegra_i2c_mutex_lock() fails, the function returns without calling pm_runtime_put(), leaking the runtime PM reference acquired by the preceding pm_runtime_get_sync(). This prevents the device from ever entering runtime suspend. Add the missing pm_runtime_put() before returning on lock failure. | ||||
| CVE-2026-53304 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Resolve soft lockup issue when opening /dev/sgX The parameter def_reserved_size defines the default buffer size reserved for each Sg_fd and should be restricted to a range between 0 and 1,048,576 (see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the function sg_proc_write_dressz enforces this limit, it is possible to bypass it by directly modifying the module parameter as shown below, which then causes a soft lockup: echo -1 > /sys/module/sg/parameters/def_reserved_size exec 4<> /dev/sg0 watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537] Modules loaded: CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134, PREEMPT disabled Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version 1.16.1-2.fc37 dated 04/01/2014 ... Call Trace: sg_build_reserve+0x5c/0xa0 sg_add_sfp+0x168/0x270 sg_open+0x16e/0x340 chrdev_open+0xbe/0x230 do_dentry_open+0x175/0x480 vfs_open+0x34/0xf0 do_open+0x265/0x3d0 path_openat+0x110/0x290 do_filp_open+0xc3/0x170 do_sys_openat2+0x71/0xe0 __x64_sys_openat+0x6d/0xa0 do_syscall_64+0x62/0x310 entry_SYSCALL_64_after_hwframe+0x76/0x7e The fix is to use module_param_cb to validate and reject invalid values assigned to def_reserved_size. | ||||
| CVE-2026-53293 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix AMDGPU_INFO_READ_MMR_REG There were multiple issues in that code. First of all the order between the reset semaphore and the mm_lock was wrong (e.g. copy_to_user) was called while holding the lock. Then we allocated memory while holding the reset semaphore which is also a pretty big bug and can deadlock. Then we used down_read_trylock() instead of waiting for the reset to finish. (cherry picked from commit 361b6e6b303d4b691f6c5974d3eaab67ca6dd90e) | ||||
| CVE-2026-53207 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: fix hugetlb_lock AA deadlock in get_huge_page_for_hwpoison Two concurrent madvise(MADV_HWPOISON) calls on the same hugetlb page can trigger a recursive spinlock self-deadlock (AA deadlock) on hugetlb_lock when racing with a concurrent unmap: thread#0 thread#1 -------- -------- madvise(folio, MADV_HWPOISON) -> poisons the folio successfully madvise(folio, MADV_HWPOISON) unmap(folio) try_memory_failure_hugetlb get_huge_page_for_hwpoison spin_lock_irq(&hugetlb_lock) <- held __get_huge_page_for_hwpoison hugetlb_update_hwpoison() -> MF_HUGETLB_FOLIO_PRE_POISONED goto out: folio_put() refcount: 1 -> 0 free_huge_folio() spin_lock_irqsave(&hugetlb_lock) -> AA DEADLOCK! The out: path in __get_huge_page_for_hwpoison() calls folio_put() to drop the GUP reference while the hugetlb_lock is still held by the hugetlb.c wrapper get_huge_page_for_hwpoison(). If concurrent unmap has released the page table mapping reference, folio_put() drops the folio refcount to zero, triggering free_huge_folio() which attempts to re-acquire the non-recursive hugetlb_lock. Fix this by moving hugetlb_lock acquisition from the hugetlb.c wrapper into get_huge_page_for_hwpoison(). Place spin_unlock_irq() before the folio_put() at the out: label so the folio is always released outside the lock. [akpm@linux-foundation.org: fix race, rename label per Miaohe] | ||||
| CVE-2026-53125 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md: fix array_state=clear sysfs deadlock When "clear" is written to array_state, md_attr_store() breaks sysfs active protection so the array can delete itself from its own sysfs store method. However, md_attr_store() currently drops the mddev reference before calling sysfs_unbreak_active_protection(). Once do_md_stop(..., 0) has made the mddev eligible for delayed deletion, the temporary kobject reference taken by sysfs_break_active_protection() can become the last kobject reference protecting the md kobject. That allows sysfs_unbreak_active_protection() to drop the last kobject reference from the current sysfs writer context. kobject teardown then recurses into kernfs removal while the current sysfs node is still being unwound, and lockdep reports recursive locking on kn->active with kernfs_drain() in the call chain. Reproducer on an existing level: 1. Create an md0 linear array and activate it: mknod /dev/md0 b 9 0 echo none > /sys/block/md0/md/metadata_version echo linear > /sys/block/md0/md/level echo 1 > /sys/block/md0/md/raid_disks echo "$(cat /sys/class/block/sdb/dev)" > /sys/block/md0/md/new_dev echo "$(($(cat /sys/class/block/sdb/size) / 2))" > \ /sys/block/md0/md/dev-sdb/size echo 0 > /sys/block/md0/md/dev-sdb/slot echo active > /sys/block/md0/md/array_state 2. Wait briefly for the array to settle, then clear it: sleep 2 echo clear > /sys/block/md0/md/array_state The warning looks like: WARNING: possible recursive locking detected bash/588 is trying to acquire lock: (kn->active#65) at __kernfs_remove+0x157/0x1d0 but task is already holding lock: (kn->active#65) at sysfs_unbreak_active_protection+0x1f/0x40 ... Call Trace: kernfs_drain __kernfs_remove kernfs_remove_by_name_ns sysfs_remove_group sysfs_remove_groups __kobject_del kobject_put md_attr_store kernfs_fop_write_iter vfs_write ksys_write Restore active protection before mddev_put() so the extra sysfs kobject reference is dropped while the mddev is still held alive. The actual md kobject deletion is then deferred until after the sysfs write path has fully returned. | ||||
| CVE-2026-53103 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix potential deadlock in mt7925_roc_abort_sync roc_abort_sync() can deadlock with roc_work(). roc_work() holds dev->mt76.mutex, while cancel_work_sync() waits for roc_work() to finish. If the caller already owns the same mutex, both sides block and no progress is possible. This deadlock can occur during station removal when mt76_sta_state() -> mt76_sta_remove() -> mt7925_mac_sta_remove_link() -> mt7925_mac_link_sta_remove() -> mt7925_roc_abort_sync() invokes cancel_work_sync() while roc_work() is still running and holding dev->mt76.mutex. This avoids the mutex deadlock and preserves exactly-once work ownership. | ||||
| CVE-2026-53101 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix potential deadlock in mt7921_roc_abort_sync roc_abort_sync() can deadlock with roc_work(). roc_work() holds dev->mt76.mutex, while cancel_work_sync() waits for roc_work() to finish. If the caller already owns the same mutex, both sides block and no progress is possible. This deadlock can occur during station removal when mt76_sta_state() -> mt76_sta_remove() -> mt7921_mac_sta_remove() -> mt7921_roc_abort_sync() invokes cancel_work_sync() while roc_work() is still running and holding dev->mt76.mutex. This avoids the mutex deadlock and preserves exactly-once work ownership. | ||||
| CVE-2026-53100 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix deadlock in remain-on-channel mt76_remain_on_channel() and mt76_roc_complete() call mt76_set_channel() while already holding dev->mutex. Since mt76_set_channel() also acquires dev->mutex, this results in a deadlock. Use __mt76_set_channel() instead of mt76_set_channel(). Add cancel_delayed_work_sync() for mac_work before acquiring the mutex in mt76_remain_on_channel() to prevent a secondary deadlock with the mac_work workqueue. | ||||
| CVE-2026-53037 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: usbhid: fix deadlock in hid_post_reset() You can build a USB device that includes a HID component and a storage or UAS component. The components can be reset only together. That means that hid_pre_reset() and hid_post_reset() are in the block IO error handling. Hence no memory allocation used in them may do block IO because the IO can deadlock on the mutex held while resetting a device and calling the interface drivers. Use GFP_NOIO for all allocations in them. | ||||
| CVE-2026-53035 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix af_unix iter deadlock bpf_iter_unix_seq_show() may deadlock when lock_sock_fast() takes the fast path and the iter prog attempts to update a sockmap. Which ends up spinning at sock_map_update_elem()'s bh_lock_sock(): WARNING: possible recursive locking detected test_progs/1393 is trying to acquire lock: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: sock_map_update_elem+0xdb/0x1f0 but task is already holding lock: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_UNIX); lock(slock-AF_UNIX); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by test_progs/1393: #0: ffff88814b59c790 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x59/0x10d0 #1: ffff88811ec25fd8 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: bpf_seq_read+0x42c/0x10d0 #2: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0 #3: ffffffff85a6a7c0 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x51d/0xb00 Call Trace: dump_stack_lvl+0x5d/0x80 print_deadlock_bug.cold+0xc0/0xce __lock_acquire+0x130f/0x2590 lock_acquire+0x14e/0x2b0 _raw_spin_lock+0x30/0x40 sock_map_update_elem+0xdb/0x1f0 bpf_prog_2d0075e5d9b721cd_dump_unix+0x55/0x4f4 bpf_iter_run_prog+0x5b9/0xb00 bpf_iter_unix_seq_show+0x1f7/0x2e0 bpf_seq_read+0x42c/0x10d0 vfs_read+0x171/0xb20 ksys_read+0xff/0x200 do_syscall_64+0x6b/0x3a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2026-46262 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_xcvr: Revert fix missing lock in fsl_xcvr_mode_put() This reverts commit f51424872760 ("ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()"). The original patch attempted to acquire the card->controls_rwsem lock in fsl_xcvr_mode_put(). However, this function is called from the upper ALSA core function snd_ctl_elem_write(), which already holds the write lock on controls_rwsem for the whole put operation. So there is no need to simply hold the lock for fsl_xcvr_activate_ctl() again. Acquiring the read lock while holding the write lock in the same thread results in a deadlock and a hung task, as reported by Alexander Stein. | ||||
| CVE-2026-46252 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: fix locking in regulator_resolve_supply() error path If late enabling of a supply regulator fails in regulator_resolve_supply(), the code currently triggers a lockdep warning: WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596 ... Call trace: _regulator_put+0x80/0xa0 (P) regulator_resolve_supply+0x7cc/0xbe0 regulator_register_resolve_supply+0x28/0xb8 as the regulator_list_mutex must be held when calling _regulator_put(). To solve this, simply switch to using regulator_put(). While at it, we should also make sure that no concurrent access happens to our rdev while we clear out the supply pointer. Add appropriate locking to ensure that. While the code in question will be removed altogether in a follow-up commit, I believe it is still beneficial to have this corrected before removal for future reference. | ||||
| CVE-2026-46165 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: vport: fix self-deadlock on release of tunnel ports vports are used concurrently and protected by RCU, so netdev_put() must happen after the RCU grace period. So, either in an RCU call or after the synchronize_net(). The rtnl_delete_link() must happen under RTNL and so can't be executed in RCU context. Calling synchronize_net() while holding RTNL is not a good idea for performance and system stability under load in general, so calling netdev_put() in RCU call is the right solution here. However, when the device is deleted, rtnl_unlock() will call netdev_run_todo() and block until all the references are gone. In the current code this means that we never reach the call_rcu() and the vport is never freed and the reference is never released, causing a self-deadlock on device removal. Fix that by moving the rcu_call() before the rtnl_unlock(), so the scheduled RCU callback will be executed when synchronize_net() is called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself is already released. | ||||
| CVE-2026-46063 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/shstk: Prevent deadlock during shstk sigreturn During sigreturn the shadow stack signal frame is popped. The kernel does this by reading the shadow stack using normal read accesses. When it can't assume the memory is shadow stack, it takes extra steps to makes sure it is reading actual shadow stack memory and not other normal readable memory. It does this by holding the mmap read lock while doing the access and checking the flags of the VMA. Unfortunately that is not safe. If the read of the shadow stack sigframe hits a page fault, the fault handler will try to recursively grab another mmap read lock. This normally works ok, but if a writer on another CPU is also waiting, the second read lock could fail and cause a deadlock. Fix this by not holding mmap lock during the read access to userspace. Instead use mmap_lock_speculate_...() to watch for changes between dropping mmap lock and the userspace access. Retry if anything grabbed an mmap write lock in between and could have changed the VMA. These mmap_lock_speculate_...() helpers use mm::mm_lock_seq, which is only available when PER_VMA_LOCK is configured. So make X86_USER_SHADOW_STACK depend on it. On x86, PER_VMA_LOCK is a default configuration for SMP kernels. So drop support for the other configs under the assumption that the !SMP shadow stack user base does not exist. Currently there is a check that skips the lookup work when the SSP can be assumed to be on a shadow stack. While reorganizing the function, remove the optimization to make the tricky code flows more common, such that issues like this cannot escape detection for so long. | ||||
| CVE-2026-46051 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix soft lockup in retry_aligned_read() When retry_aligned_read() encounters an overlapped stripe, it releases the stripe via raid5_release_stripe() which puts it on the lockless released_stripes llist. In the next raid5d loop iteration, release_stripe_list() drains the stripe onto handle_list (since STRIPE_HANDLE is set by the original IO), but retry_aligned_read() runs before handle_active_stripes() and removes the stripe from handle_list via find_get_stripe() -> list_del_init(). This prevents handle_stripe() from ever processing the stripe to resolve the overlap, causing an infinite loop and soft lockup. Fix this by using __release_stripe() with temp_inactive_list instead of raid5_release_stripe() in the failure path, so the stripe does not go through the released_stripes llist. This allows raid5d to break out of its loop, and the overlap will be resolved when the stripe is eventually processed by handle_stripe(). | ||||