| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenEMR is a free and open source electronic health records and medical practice management application. Prior to 8.3.0, userSessionLogout() in src/RestControllers/AuthorizationController.php uses decodeToken() to process an id_token_hint without verifying its signature and, when the referenced trusted session is absent, redirects to the caller-supplied post_logout_redirect_uri before validating it against the client's registered redirect URIs. An unauthenticated attacker can craft a logout link that sends a user to an arbitrary external site and invalidates the user's session, enabling convincing phishing flows from the legitimate logout endpoint. The endpoint is reachable when the OpenEMR REST API is enabled. This issue is fixed in version 8.3.0. |
| OpenEMR is a free and open source electronic health records and medical practice management application. Prior to 8.4.0, controllers/C_Document.class.php write actions, including move_action_process(), do not verify the caller's access to the source document, current patient and category, or destination patient and category before Document::change_patient() performs the mutation. A low-privilege authenticated user can reassign an arbitrary document to a patient or category the user can access and then retrieve it through the normally protected read path. The reassignment occurs before a later list rendering check, so a final HTTP 403 response does not mean the unauthorized write was blocked. This issue is fixed in version 8.4.0. |
| reset_password.html parses query string parameters and uses the 'url' parameter as a redirection target (window.location = url) after password reset, optionally delayed by a 'delay' parameter. No validation or allowlisting is performed on url, enabling an attacker to redirect users to an arbitrary external site after completion of the password-reset workflow. |
| A logic issue was addressed with improved checks. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to gain root privileges. |
| A Kafka broker using SASL/OAUTHBEARER with the default validator (sasl.oauthbearer.jwt.validator.class=DefaultJwtValidator) selects its implementation from configuration. When sasl.oauthbearer.jwks.endpoint.url is set, the validator verifies the JWT signature. When that URL is unset (the default) and no verification key resolver is supplied, DefaultJwtValidator silently falls back to ClientJwtValidator, which does not verify the JWT signature, algorithm, or issuer - and the broker starts with no warning or error. This is the residual of CVE-2026-33557, whose fix restored signature verification only on the path where the JWKS endpoint URL is set.
Impact:
A broker in this state accepts any structurally valid JWT, including "alg":"none" tokens. An unauthenticated remote attacker who can reach the listener can forge a token asserting any principal - including configured superusers - and gain full access to the cluster. Only brokers that enable SASL/OAUTHBEARER validation without a JWKS endpoint URL (and without a custom verification key resolver) are affected; brokers that set the URL verify signatures and are not affected. Unlike CVE-2026-110952 (issuer/audience not enforced by default), here no signature is verified at all.
Mitigation (all affected versions, no upgrade required):
Set sasl.oauthbearer.jwks.endpoint.url for every listener/mechanism that uses OAuthBearerValidatorCallbackHandler, or configure a signature-verifying sasl.oauthbearer.jwt.validator.class.
Resolution:
From Apache Kafka 4.2.2, 4.3.1, and 4.4.0: a broker that would fall back to the non-verifying ClientJwtValidator fails to start with a ConfigException instead of running without signature verification (secure by default). |
| A denial of service vulnerability was found in GStreamer's AV1 codec parser in gst-plugins-bad. The gst_av1_parser_parse_tile_list_obu() function passes a byte count to a bit-reader API that expects a bit count, causing parser desynchronization. A remote attacker could trick a user into opening a specially crafted AV1 media file, triggering an assertion abort and causing the application to crash. |
| SuiteCRM is an open-source, enterprise-ready Customer Relationship Management (CRM) software application. Prior to 7.15.2 and 8.10.2, the changeReportPage controller action renders a protected report without repeating the record-level access check enforced by DetailView. The affected flow begins at AOR_Reports and uses changeReportPage, and DetailView to carry attacker-controlled data or authorization state into the security-sensitive operation. An authenticated user can directly invoke the action and read report rows and restricted-module data despite owner-only or role-based report visibility. This issue is fixed in versions 7.15.2 and 8.10.2. |
| Readest is a modern, feature-rich ebook reader designed for seamless cross-platform access and an intuitive reading experience. Prior to 0.11.10, POST /api/stripe/check in apps/readest-app/src/app/api/stripe/check/route.ts accepted a client-controlled sessionId, retrieved the corresponding Stripe Checkout Session, and granted the paid plan to the authenticated caller without verifying session.metadata.userId. The createOrUpdateSubscription path then updated the plans row keyed by the caller's user identifier rather than the Checkout Session owner. Any authenticated free user with a paid active Checkout Session identifier, including one from the user's own single legitimate purchase, could replay that identifier to upgrade additional accounts without payment. This issue is fixed in version 0.11.10. |
| Chevereto before 4.5.8 contains an authorization bypass vulnerability in the get-album-contents action of the /json route that allows unauthenticated attackers to list private albums by supplying another user's album id. Attackers with a session token from any public page and an album's encoded id can obtain image filenames, viewer and direct file URLs, and download private images. |
| Content Egg plugin for WordPress before 12.1.0 contains a broken access control vulnerability that allows unauthenticated attackers to retrieve Content Egg product data from unpublished posts by calling the REST route POST /wp-json/content-egg/v1/render-blocks, whose permission_check() improperly returns true when no X-WP-Nonce header is supplied. Attackers can supply the post_id and module id of a draft, pending, scheduled, or private post to handle_render(), which lacks a publish-status check, to disclose product titles, destination and affiliate URLs, merchant or domain information, and descriptions. |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. Prior to 1.18.6, a process inside a sandbox could send MSGID_FILE_SET_ATTRIBUTES or MSGID_FILE_SET_SHORT_NAME to SbieSvc and cause the SYSTEM service to open and modify an existing file outside the sandbox. The direct primitive changes file attributes, timestamps, writeability, or 8.3 short names; a short-name redirection can additionally contribute to SYSTEM code execution when a privileged process resolves an attacker-controlled short-name path in a location SbieSvc can open. This vulnerability is fixed in 1.18.6. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Fix kernel crash when hard resetting the GPU
The GPU hard reset sequence calls pm_runtime_force_suspend() and
pm_runtime_force_resume(), which according to their documentation should
only be used during system-wide PM transitions to sleep states.
The main issue though is that depending on some internal runtime PM
state as seen by pm_runtime_force_suspend() (whether the usage count is
<= 1), pm_runtime_force_resume() might not resume the device unless
needed. If that happens, the runtime PM resume callback
pvr_power_device_resume() is not called, the GPU clocks are not
re-enabled, and the kernel crashes on the next attempt to access GPU
registers as part of the power-on sequence.
Replace calls to pm_runtime_force_suspend() and
pm_runtime_force_resume() with direct calls to the driver's runtime PM
callbacks, pvr_power_device_suspend() and pvr_power_device_resume(),
to ensure clocks are re-enabled and avoid the kernel crash. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/scheduler: signal scheduled fence when kill job
When an entity from application B is killed, drm_sched_entity_kill()
removes all jobs belonging to that entity through
drm_sched_entity_kill_jobs_work(). If application A's job depends on a
scheduled fence from application B's job, and that fence is not properly
signaled during the killing process, application A's dependency cannot be
cleared.
This leads to application A hanging indefinitely while waiting for a
dependency that will never be resolved. Fix this issue by ensuring that
scheduled fences are properly signaled when an entity is killed, allowing
dependent applications to continue execution. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/mm: Fix in_atomic() handling in do_secure_storage_access()
Kernel user spaces accesses to not exported pages in atomic context
incorrectly try to resolve the page fault.
With debug options enabled call traces like this can be seen:
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1523
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 419074, name: qemu-system-s39
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
INFO: lockdep is turned off.
Preemption disabled at:
[<00000383ea47cfa2>] copy_page_from_iter_atomic+0xa2/0x8a0
CPU: 12 UID: 0 PID: 419074 Comm: qemu-system-s39
Tainted: G W 6.16.0-20250531.rc0.git0.69b3a602feac.63.fc42.s390x+debug #1 PREEMPT
Tainted: [W]=WARN
Hardware name: IBM 3931 A01 703 (LPAR)
Call Trace:
[<00000383e990d282>] dump_stack_lvl+0xa2/0xe8
[<00000383e99bf152>] __might_resched+0x292/0x2d0
[<00000383eaa7c374>] down_read+0x34/0x2d0
[<00000383e99432f8>] do_secure_storage_access+0x108/0x360
[<00000383eaa724b0>] __do_pgm_check+0x130/0x220
[<00000383eaa842e4>] pgm_check_handler+0x114/0x160
[<00000383ea47d028>] copy_page_from_iter_atomic+0x128/0x8a0
([<00000383ea47d016>] copy_page_from_iter_atomic+0x116/0x8a0)
[<00000383e9c45eae>] generic_perform_write+0x16e/0x310
[<00000383e9eb87f4>] ext4_buffered_write_iter+0x84/0x160
[<00000383e9da0de4>] vfs_write+0x1c4/0x460
[<00000383e9da123c>] ksys_write+0x7c/0x100
[<00000383eaa7284e>] __do_syscall+0x15e/0x280
[<00000383eaa8417e>] system_call+0x6e/0x90
INFO: lockdep is turned off.
It is not allowed to take the mmap_lock while in atomic context. Therefore
handle such a secure storage access fault as if the accessed page is not
mapped: the uaccess function will return -EFAULT, and the caller has to
deal with this. Usually this means that the access is retried in process
context, which allows to resolve the page fault (or in this case export the
page). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix taking invalid lock on wedge
If device wedges on e.g. GuC upload, the submission is not yet enabled
and the state is not even initialized. Protect the wedge call so it does
nothing in this case. It fixes the following splat:
[] xe 0000:bf:00.0: [drm] device wedged, needs recovery
[] ------------[ cut here ]------------
[] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[] WARNING: CPU: 48 PID: 312 at kernel/locking/mutex.c:564 __mutex_lock+0x8a1/0xe60
...
[] RIP: 0010:__mutex_lock+0x8a1/0xe60
[] mutex_lock_nested+0x1b/0x30
[] xe_guc_submit_wedge+0x80/0x2b0 [xe] |
| In the Linux kernel, the following vulnerability has been resolved:
Input: gpio-keys - fix a sleep while atomic with PREEMPT_RT
When enabling PREEMPT_RT, the gpio_keys_irq_timer() callback runs in
hard irq context, but the input_event() takes a spin_lock, which isn't
allowed there as it is converted to a rt_spin_lock().
[ 4054.289999] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 4054.290028] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/0
...
[ 4054.290195] __might_resched+0x13c/0x1f4
[ 4054.290209] rt_spin_lock+0x54/0x11c
[ 4054.290219] input_event+0x48/0x80
[ 4054.290230] gpio_keys_irq_timer+0x4c/0x78
[ 4054.290243] __hrtimer_run_queues+0x1a4/0x438
[ 4054.290257] hrtimer_interrupt+0xe4/0x240
[ 4054.290269] arch_timer_handler_phys+0x2c/0x44
[ 4054.290283] handle_percpu_devid_irq+0x8c/0x14c
[ 4054.290297] handle_irq_desc+0x40/0x58
[ 4054.290307] generic_handle_domain_irq+0x1c/0x28
[ 4054.290316] gic_handle_irq+0x44/0xcc
Considering the gpio_keys_irq_isr() can run in any context, e.g. it can
be threaded, it seems there's no point in requesting the timer isr to
run in hard irq context.
Relax the hrtimer not to use the hard context. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: Check dsbr size from EFI variable
Since the size of struct btintel_dsbr is already known, we can just
start there instead of querying the EFI variable size. If the final
result doesn't match what we expect also fail. This fixes a stack buffer
overflow when the EFI variable is larger than struct btintel_dsbr. |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: get rid of the crit lock
Get rid of the crit lock.
That frees us from the error prone logic of try_locks.
Thanks to netdev_lock() by Jakub it is now easy, and in most cases we were
protected by it already - replace crit lock by netdev lock when it was not
the case.
Lockdep reports that we should cancel the work under crit_lock [splat1],
and that was the scheme we have mostly followed since [1] by Slawomir.
But when that is done we still got into deadlocks [splat2]. So instead
we should look at the bigger problem, namely "weird locking/scheduling"
of the iavf. The first step to fix that is to remove the crit lock.
I will followup with a -next series that simplifies scheduling/tasks.
Cancel the work without netdev lock (weird unlock+lock scheme),
to fix the [splat2] (which would be totally ugly if we would kept
the crit lock).
Extend protected part of iavf_watchdog_task() to include scheduling
more work.
Note that the removed comment in iavf_reset_task() was misplaced,
it belonged to inside of the removed if condition, so it's gone now.
[splat1] - w/o this patch - The deadlock during VF removal:
WARNING: possible circular locking dependency detected
sh/3825 is trying to acquire lock:
((work_completion)(&(&adapter->watchdog_task)->work)){+.+.}-{0:0}, at: start_flush_work+0x1a1/0x470
but task is already holding lock:
(&adapter->crit_lock){+.+.}-{4:4}, at: iavf_remove+0xd1/0x690 [iavf]
which lock already depends on the new lock.
[splat2] - when cancelling work under crit lock, w/o this series,
see [2] for the band aid attempt
WARNING: possible circular locking dependency detected
sh/3550 is trying to acquire lock:
((wq_completion)iavf){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90
but task is already holding lock:
(&dev->lock){+.+.}-{4:4}, at: iavf_remove+0xa6/0x6e0 [iavf]
which lock already depends on the new lock.
[1] fc2e6b3b132a ("iavf: Rework mutexes for better synchronisation")
[2] https://github.com/pkitszel/linux/commit/52dddbfc2bb60294083f5711a158a |
| In the Linux kernel, the following vulnerability has been resolved:
block: don't use submit_bio_noacct_nocheck in blk_zone_wplug_bio_work
Bios queued up in the zone write plug have already gone through all all
preparation in the submit_bio path, including the freeze protection.
Submitting them through submit_bio_noacct_nocheck duplicates the work
and can can cause deadlocks when freezing a queue with pending bio
write plugs.
Go straight to ->submit_bio or blk_mq_submit_bio to bypass the
superfluous extra freeze protection and checks. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix WARN() in get_bpf_raw_tp_regs
syzkaller reported an issue:
WARNING: CPU: 3 PID: 5971 at kernel/trace/bpf_trace.c:1861 get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861
Modules linked in:
CPU: 3 UID: 0 PID: 5971 Comm: syz-executor205 Not tainted 6.15.0-rc5-syzkaller-00038-g707df3375124 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861
RSP: 0018:ffffc90003636fa8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffff81c6bc4c
RDX: ffff888032efc880 RSI: ffffffff81c6bc83 RDI: 0000000000000005
RBP: ffff88806a730860 R08: 0000000000000005 R09: 0000000000000003
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000004
R13: 0000000000000001 R14: ffffc90003637008 R15: 0000000000000900
FS: 0000000000000000(0000) GS:ffff8880d6cdf000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7baee09130 CR3: 0000000029f5a000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1934 [inline]
bpf_get_stack_raw_tp+0x24/0x160 kernel/trace/bpf_trace.c:1931
bpf_prog_ec3b2eefa702d8d3+0x43/0x47
bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
__bpf_prog_run include/linux/filter.h:718 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
__bpf_trace_run kernel/trace/bpf_trace.c:2363 [inline]
bpf_trace_run3+0x23f/0x5a0 kernel/trace/bpf_trace.c:2405
__bpf_trace_mmap_lock_acquire_returned+0xfc/0x140 include/trace/events/mmap_lock.h:47
__traceiter_mmap_lock_acquire_returned+0x79/0xc0 include/trace/events/mmap_lock.h:47
__do_trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline]
trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline]
__mmap_lock_do_trace_acquire_returned+0x138/0x1f0 mm/mmap_lock.c:35
__mmap_lock_trace_acquire_returned include/linux/mmap_lock.h:36 [inline]
mmap_read_trylock include/linux/mmap_lock.h:204 [inline]
stack_map_get_build_id_offset+0x535/0x6f0 kernel/bpf/stackmap.c:157
__bpf_get_stack+0x307/0xa10 kernel/bpf/stackmap.c:483
____bpf_get_stack kernel/bpf/stackmap.c:499 [inline]
bpf_get_stack+0x32/0x40 kernel/bpf/stackmap.c:496
____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1941 [inline]
bpf_get_stack_raw_tp+0x124/0x160 kernel/trace/bpf_trace.c:1931
bpf_prog_ec3b2eefa702d8d3+0x43/0x47
Tracepoint like trace_mmap_lock_acquire_returned may cause nested call
as the corner case show above, which will be resolved with more general
method in the future. As a result, WARN_ON_ONCE will be triggered. As
Alexei suggested, remove the WARN_ON_ONCE first. |
