| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
APEI/GHES: ensure that won't go past CPER allocated record
The logic at ghes_new() prevents allocating too large records, by
checking if they're bigger than GHES_ESTATUS_MAX_SIZE (currently, 64KB).
Yet, the allocation is done with the actual number of pages from the
CPER bios table location, which can be smaller.
Yet, a bad firmware could send data with a different size, which might
be bigger than the allocated memory, causing an OOPS:
Unable to handle kernel paging request at virtual address fff00000f9b40000
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
Data abort info:
ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 52-bit VAs, pgdp=000000008ba16000
[fff00000f9b40000] pgd=180000013ffff403, p4d=180000013fffe403, pud=180000013f85b403, pmd=180000013f68d403, pte=0000000000000000
Internal error: Oops: 0000000096000007 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 303 Comm: kworker/0:1 Not tainted 6.19.0-rc1-00002-gda407d200220 #34 PREEMPT
Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022
Workqueue: kacpi_notify acpi_os_execute_deferred
pstate: 214020c5 (nzCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : hex_dump_to_buffer+0x30c/0x4a0
lr : hex_dump_to_buffer+0x328/0x4a0
sp : ffff800080e13880
x29: ffff800080e13880 x28: ffffac9aba86f6a8 x27: 0000000000000083
x26: fff00000f9b3fffc x25: 0000000000000004 x24: 0000000000000004
x23: ffff800080e13905 x22: 0000000000000010 x21: 0000000000000083
x20: 0000000000000001 x19: 0000000000000008 x18: 0000000000000010
x17: 0000000000000001 x16: 00000007c7f20fec x15: 0000000000000020
x14: 0000000000000008 x13: 0000000000081020 x12: 0000000000000008
x11: ffff800080e13905 x10: ffff800080e13988 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000001 x6 : 0000000000000020
x5 : 0000000000000030 x4 : 00000000fffffffe x3 : 0000000000000000
x2 : ffffac9aba78c1c8 x1 : ffffac9aba76d0a8 x0 : 0000000000000008
Call trace:
hex_dump_to_buffer+0x30c/0x4a0 (P)
print_hex_dump+0xac/0x170
cper_estatus_print_section+0x90c/0x968
cper_estatus_print+0xf0/0x158
__ghes_print_estatus+0xa0/0x148
ghes_proc+0x1bc/0x220
ghes_notify_hed+0x5c/0xb8
notifier_call_chain+0x78/0x148
blocking_notifier_call_chain+0x4c/0x80
acpi_hed_notify+0x28/0x40
acpi_ev_notify_dispatch+0x50/0x80
acpi_os_execute_deferred+0x24/0x48
process_one_work+0x15c/0x3b0
worker_thread+0x2d0/0x400
kthread+0x148/0x228
ret_from_fork+0x10/0x20
Code: 6b14033f 540001ad a94707e2 f100029f (b8747b44)
---[ end trace 0000000000000000 ]---
Prevent that by taking the actual allocated are into account when
checking for CPER length.
[ rjw: Subject tweaks ] |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: supply snapshot context in ceph_zero_partial_object()
The ceph_zero_partial_object function was missing proper snapshot
context for its OSD write operations, which could lead to data
inconsistencies in snapshots.
Reproducer:
../src/vstart.sh --new -x --localhost --bluestore
./bin/ceph auth caps client.fs_a mds 'allow rwps fsname=a' mon 'allow r fsname=a' osd 'allow rw tag cephfs data=a'
mount -t ceph fs_a@.a=/ /mnt/mycephfs/ -o conf=./ceph.conf
dd if=/dev/urandom of=/mnt/mycephfs/foo bs=64K count=1
mkdir /mnt/mycephfs/.snap/snap1
md5sum /mnt/mycephfs/.snap/snap1/foo
fallocate -p -o 0 -l 4096 /mnt/mycephfs/foo
echo 3 > /proc/sys/vm/drop/caches
md5sum /mnt/mycephfs/.snap/snap1/foo # get different md5sum!! |
| In the Linux kernel, the following vulnerability has been resolved:
EFI/CPER: don't go past the ARM processor CPER record buffer
There's a logic inside GHES/CPER to detect if the section_length
is too small, but it doesn't detect if it is too big.
Currently, if the firmware receives an ARM processor CPER record
stating that a section length is big, kernel will blindly trust
section_length, producing a very long dump. For instance, a 67
bytes record with ERR_INFO_NUM set 46198 and section length
set to 854918320 would dump a lot of data going a way past the
firmware memory-mapped area.
Fix it by adding a logic to prevent it to go past the buffer
if ERR_INFO_NUM is too big, making it report instead:
[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
[Hardware Error]: event severity: recoverable
[Hardware Error]: Error 0, type: recoverable
[Hardware Error]: section_type: ARM processor error
[Hardware Error]: MIDR: 0xff304b2f8476870a
[Hardware Error]: section length: 854918320, CPER size: 67
[Hardware Error]: section length is too big
[Hardware Error]: firmware-generated error record is incorrect
[Hardware Error]: ERR_INFO_NUM is 46198
[ rjw: Subject and changelog tweaks ] |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Ignore -EBUSY when checking nested events from vcpu_block()
Ignore -EBUSY when checking nested events after exiting a blocking state
while L2 is active, as exiting to userspace will generate a spurious
userspace exit, usually with KVM_EXIT_UNKNOWN, and likely lead to the VM's
demise. Continuing with the wakeup isn't perfect either, as *something*
has gone sideways if a vCPU is awakened in L2 with an injected event (or
worse, a nested run pending), but continuing on gives the VM a decent
chance of surviving without any major side effects.
As explained in the Fixes commits, it _should_ be impossible for a vCPU to
be put into a blocking state with an already-injected event (exception,
IRQ, or NMI). Unfortunately, userspace can stuff MP_STATE and/or injected
events, and thus put the vCPU into what should be an impossible state.
Don't bother trying to preserve the WARN, e.g. with an anti-syzkaller
Kconfig, as WARNs can (hopefully) be added in paths where _KVM_ would be
violating x86 architecture, e.g. by WARNing if KVM attempts to inject an
exception or interrupt while the vCPU isn't running. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: Add support for TSV110 Spectre-BHB mitigation
The TSV110 processor is vulnerable to the Spectre-BHB (Branch History
Buffer) attack, which can be exploited to leak information through
branch prediction side channels. This commit adds the MIDR of TSV110
to the list for software mitigation. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: set platform driver data
Add missing platform_set_drvdata() as the data will be used in remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix WARNING in usb_tx_block
The function usb_tx_block() submits cardp->tx_urb without ensuring that
any previous transmission on this URB has completed. If a second call
occurs while the URB is still active (e.g. during rapid firmware loading),
usb_submit_urb() detects the active state and triggers a warning:
'URB submitted while active'.
Fix this by enforcing serialization: call usb_kill_urb() before
submitting the new request. This ensures the URB is idle and safe to reuse. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add signal type check for dcn401 get_phyd32clk_src
Trying to access link enc on a dpia link will cause a crash otherwise |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kexec: add a sanity check on previous kernel's ima kexec buffer
When the second-stage kernel is booted via kexec with a limiting command
line such as "mem=<size>", the physical range that contains the carried
over IMA measurement list may fall outside the truncated RAM leading to a
kernel panic.
BUG: unable to handle page fault for address: ffff97793ff47000
RIP: ima_restore_measurement_list+0xdc/0x45a
#PF: error_code(0x0000) – not-present page
Other architectures already validate the range with page_is_ram(), as done
in commit cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer
against memory bounds") do a similar check on x86.
Without carrying the measurement list across kexec, the attestation
would fail. |
| In the Linux kernel, the following vulnerability has been resolved:
team: avoid NETDEV_CHANGEMTU event when unregistering slave
syzbot is reporting
unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3
ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at
__netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
netdev_hold include/linux/netdevice.h:4429 [inline]
inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286
inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_mtu net/core/dev.c:2318 [inline]
netif_set_mtu_ext+0x5aa/0x800 net/core/dev.c:9886
netif_set_mtu+0xd7/0x1b0 net/core/dev.c:9907
dev_set_mtu+0x126/0x260 net/core/dev_api.c:248
team_port_del+0xb07/0xcb0 drivers/net/team/team_core.c:1333
team_del_slave drivers/net/team/team_core.c:1936 [inline]
team_device_event+0x207/0x5b0 drivers/net/team/team_core.c:2929
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2281 [inline]
call_netdevice_notifiers net/core/dev.c:2295 [inline]
__dev_change_net_namespace+0xcb7/0x2050 net/core/dev.c:12592
do_setlink+0x2ce/0x4590 net/core/rtnetlink.c:3060
rtnl_changelink net/core/rtnetlink.c:3776 [inline]
__rtnl_newlink net/core/rtnetlink.c:3935 [inline]
rtnl_newlink+0x15a9/0x1be0 net/core/rtnetlink.c:4072
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
problem. Ido Schimmel found steps to reproduce
ip link add name team1 type team
ip link add name dummy1 mtu 1499 master team1 type dummy
ip netns add ns1
ip link set dev dummy1 netns ns1
ip -n ns1 link del dev dummy1
and also found that the same issue was fixed in the bond driver in
commit f51048c3e07b ("bonding: avoid NETDEV_CHANGEMTU event when
unregistering slave").
Let's do similar thing for the team driver, with commit ad7c7b2172c3 ("net:
hold netdev instance lock during sysfs operations") and commit 303a8487a657
("net: s/__dev_set_mtu/__netif_set_mtu/") also applied. |
| In the Linux kernel, the following vulnerability has been resolved:
APEI/GHES: ARM processor Error: don't go past allocated memory
If the BIOS generates a very small ARM Processor Error, or
an incomplete one, the current logic will fail to deferrence
err->section_length
and
ctx_info->size
Add checks to avoid that. With such changes, such GHESv2
records won't cause OOPSes like this:
[ 1.492129] Internal error: Oops: 0000000096000005 [#1] SMP
[ 1.495449] Modules linked in:
[ 1.495820] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.18.0-rc1-00017-gabadcc3553dd-dirty #18 PREEMPT
[ 1.496125] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022
[ 1.496433] Workqueue: kacpi_notify acpi_os_execute_deferred
[ 1.496967] pstate: 814000c5 (Nzcv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 1.497199] pc : log_arm_hw_error+0x5c/0x200
[ 1.497380] lr : ghes_handle_arm_hw_error+0x94/0x220
0xffff8000811c5324 is in log_arm_hw_error (../drivers/ras/ras.c:75).
70 err_info = (struct cper_arm_err_info *)(err + 1);
71 ctx_info = (struct cper_arm_ctx_info *)(err_info + err->err_info_num);
72 ctx_err = (u8 *)ctx_info;
73
74 for (n = 0; n < err->context_info_num; n++) {
75 sz = sizeof(struct cper_arm_ctx_info) + ctx_info->size;
76 ctx_info = (struct cper_arm_ctx_info *)((long)ctx_info + sz);
77 ctx_len += sz;
78 }
79
and similar ones while trying to access section_length on an
error dump with too small size.
[ rjw: Subject tweaks ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate user queue size constraints
Add validation to ensure user queue sizes meet hardware requirements:
- Size must be a power of two for efficient ring buffer wrapping
- Size must be at least AMDGPU_GPU_PAGE_SIZE to prevent undersized allocations
This prevents invalid configurations that could lead to GPU faults or
unexpected behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Adjust PHY FSM transition to TX_EN-to-PLL_ON for TMDS on DCN35
[Why]
A backport of the change made for DCN401 that addresses an issue where
we turn off the PHY PLL when disabling TMDS output, which causes the
OTG to remain stuck.
The OTG being stuck can lead to a hang in the DCHVM's ability to ACK
invalidations when it thinks the HUBP is still on but it's not receiving
global sync.
The transition to PLL_ON needs to be atomic as there's no guarantee
that the thread isn't pre-empted or is able to complete before the
IOMMU watchdog times out.
[How]
Backport the implementation from dcn401 back to dcn35.
There's a functional difference in when the eDP output is disabled in
dcn401 code so we don't want to utilize it directly. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-async: Fix error handling on steps after finding a match
Once an async connection is found to be matching with an fwnode, a
sub-device may be registered (in case it wasn't already), its bound
operation is called, ancillary links are created, the async connection
is added to the sub-device's list of connections and removed from the
global waiting connection list. Further on, the sub-device's possible own
notifier is searched for possible additional matches.
Fix these specific issues:
- If v4l2_async_match_notify() failed before the sub-notifier handling,
the async connection was unbound and its entry removed from the
sub-device's async connection list. The latter part was also done in
v4l2_async_match_notify().
- The async connection's sd field was only set after creating ancillary
links in v4l2_async_match_notify(). It was however dereferenced in
v4l2_async_unbind_subdev_one(), which was called on error path of
v4l2_async_match_notify() failure. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: Move vbus draw to workqueue context
Currently dwc3_gadget_vbus_draw() can be called from atomic
context, which in turn invokes power-supply-core APIs. And
some these PMIC APIs have operations that may sleep, leading
to kernel panic.
Fix this by moving the vbus_draw into a workqueue context. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/buddy: Prevent BUG_ON by validating rounded allocation
When DRM_BUDDY_CONTIGUOUS_ALLOCATION is set, the requested size is
rounded up to the next power-of-two via roundup_pow_of_two().
Similarly, for non-contiguous allocations with large min_block_size,
the size is aligned up via round_up(). Both operations can produce a
rounded size that exceeds mm->size, which later triggers
BUG_ON(order > mm->max_order).
Example scenarios:
- 9G CONTIGUOUS allocation on 10G VRAM memory:
roundup_pow_of_two(9G) = 16G > 10G
- 9G allocation with 8G min_block_size on 10G VRAM memory:
round_up(9G, 8G) = 16G > 10G
Fix this by checking the rounded size against mm->size. For
non-contiguous or range allocations where size > mm->size is invalid,
return -EINVAL immediately. For contiguous allocations without range
restrictions, allow the request to fall through to the existing
__alloc_contig_try_harder() fallback.
This ensures invalid user input returns an error or uses the fallback
path instead of hitting BUG_ON.
v2: (Matt A)
- Add Fixes, Cc stable, and Closes tags for context |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix reflink preserve cleanup issue
commit c06c303832ec ("ocfs2: fix xattr array entry __counted_by error")
doesn't handle all cases and the cleanup job for preserved xattr entries
still has bug:
- the 'last' pointer should be shifted by one unit after cleanup
an array entry.
- current code logic doesn't cleanup the first entry when xh_count is 1.
Note, commit c06c303832ec is also a bug fix for 0fe9b66c65f3. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: always flush state and policy upon NETDEV_UNREGISTER event
syzbot is reporting that "struct xfrm_state" refcount is leaking.
unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 2
ref_tracker: netdev@ffff888052f24618 has 1/1 users at
__netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
netdev_tracker_alloc include/linux/netdevice.h:4412 [inline]
xfrm_dev_state_add+0x3a5/0x1080 net/xfrm/xfrm_device.c:316
xfrm_state_construct net/xfrm/xfrm_user.c:986 [inline]
xfrm_add_sa+0x34ff/0x5fa0 net/xfrm/xfrm_user.c:1022
xfrm_user_rcv_msg+0x58e/0xc00 net/xfrm/xfrm_user.c:3507
netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2550
xfrm_netlink_rcv+0x71/0x90 net/xfrm/xfrm_user.c:3529
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x8c8/0xdd0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa5d/0xc30 net/socket.c:2592
___sys_sendmsg+0x134/0x1d0 net/socket.c:2646
__sys_sendmsg+0x16d/0x220 net/socket.c:2678
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This is because commit d77e38e612a0 ("xfrm: Add an IPsec hardware
offloading API") implemented xfrm_dev_unregister() as no-op despite
xfrm_dev_state_add() from xfrm_state_construct() acquires a reference
to "struct net_device".
I guess that that commit expected that NETDEV_DOWN event is fired before
NETDEV_UNREGISTER event fires, and also assumed that xfrm_dev_state_add()
is called only if (dev->features & NETIF_F_HW_ESP) != 0.
Sabrina Dubroca identified steps to reproduce the same symptoms as below.
echo 0 > /sys/bus/netdevsim/new_device
dev=$(ls -1 /sys/bus/netdevsim/devices/netdevsim0/net/)
ip xfrm state add src 192.168.13.1 dst 192.168.13.2 proto esp \
spi 0x1000 mode tunnel aead 'rfc4106(gcm(aes))' $key 128 \
offload crypto dev $dev dir out
ethtool -K $dev esp-hw-offload off
echo 0 > /sys/bus/netdevsim/del_device
Like these steps indicate, the NETIF_F_HW_ESP bit can be cleared after
xfrm_dev_state_add() acquired a reference to "struct net_device".
Also, xfrm_dev_state_add() does not check for the NETIF_F_HW_ESP bit
when acquiring a reference to "struct net_device".
Commit 03891f820c21 ("xfrm: handle NETDEV_UNREGISTER for xfrm device")
re-introduced the NETDEV_UNREGISTER event to xfrm_dev_event(), but that
commit for unknown reason chose to share xfrm_dev_down() between the
NETDEV_DOWN event and the NETDEV_UNREGISTER event.
I guess that that commit missed the behavior in the previous paragraph.
Therefore, we need to re-introduce xfrm_dev_unregister() in order to
release the reference to "struct net_device" by unconditionally flushing
state and policy. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Skip dev-iotlb flush for inaccessible PCIe device without scalable mode
PCIe endpoints with ATS enabled and passed through to userspace
(e.g., QEMU, DPDK) can hard-lock the host when their link drops,
either by surprise removal or by a link fault.
Commit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation
request when device is disconnected") adds pci_dev_is_disconnected()
to devtlb_invalidation_with_pasid() so ATS invalidation is skipped
only when the device is being safely removed, but it applies only
when Intel IOMMU scalable mode is enabled.
With scalable mode disabled or unsupported, a system hard-lock
occurs when a PCIe endpoint's link drops because the Intel IOMMU
waits indefinitely for an ATS invalidation that cannot complete.
Call Trace:
qi_submit_sync
qi_flush_dev_iotlb
__context_flush_dev_iotlb.part.0
domain_context_clear_one_cb
pci_for_each_dma_alias
device_block_translation
blocking_domain_attach_dev
iommu_deinit_device
__iommu_group_remove_device
iommu_release_device
iommu_bus_notifier
blocking_notifier_call_chain
bus_notify
device_del
pci_remove_bus_device
pci_stop_and_remove_bus_device
pciehp_unconfigure_device
pciehp_disable_slot
pciehp_handle_presence_or_link_change
pciehp_ist
Commit 81e921fd3216 ("iommu/vt-d: Fix NULL domain on device release")
adds intel_pasid_teardown_sm_context() to intel_iommu_release_device(),
which calls qi_flush_dev_iotlb() and can also hard-lock the system
when a PCIe endpoint's link drops.
Call Trace:
qi_submit_sync
qi_flush_dev_iotlb
__context_flush_dev_iotlb.part.0
intel_context_flush_no_pasid
device_pasid_table_teardown
pci_pasid_table_teardown
pci_for_each_dma_alias
intel_pasid_teardown_sm_context
intel_iommu_release_device
iommu_deinit_device
__iommu_group_remove_device
iommu_release_device
iommu_bus_notifier
blocking_notifier_call_chain
bus_notify
device_del
pci_remove_bus_device
pci_stop_and_remove_bus_device
pciehp_unconfigure_device
pciehp_disable_slot
pciehp_handle_presence_or_link_change
pciehp_ist
Sometimes the endpoint loses connection without a link-down event
(e.g., due to a link fault); killing the process (virsh destroy)
then hard-locks the host.
Call Trace:
qi_submit_sync
qi_flush_dev_iotlb
__context_flush_dev_iotlb.part.0
domain_context_clear_one_cb
pci_for_each_dma_alias
device_block_translation
blocking_domain_attach_dev
__iommu_attach_device
__iommu_device_set_domain
__iommu_group_set_domain_internal
iommu_detach_group
vfio_iommu_type1_detach_group
vfio_group_detach_container
vfio_group_fops_release
__fput
pci_dev_is_disconnected() only covers safe-removal paths;
pci_device_is_present() tests accessibility by reading
vendor/device IDs and internally calls pci_dev_is_disconnected().
On a ConnectX-5 (8 GT/s, x2) this costs ~70 µs.
Since __context_flush_dev_iotlb() is only called on
{attach,release}_dev paths (not hot), add pci_device_is_present()
there to skip inaccessible devices and avoid the hard-lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: enable basic endpoint checking
pegasus_probe() fills URBs with hardcoded endpoint pipes without
verifying the endpoint descriptors:
- usb_rcvbulkpipe(dev, 1) for RX data
- usb_sndbulkpipe(dev, 2) for TX data
- usb_rcvintpipe(dev, 3) for status interrupts
A malformed USB device can present these endpoints with transfer types
that differ from what the driver assumes.
Add a pegasus_usb_ep enum for endpoint numbers, replacing magic
constants throughout. Add usb_check_bulk_endpoints() and
usb_check_int_endpoints() calls before any resource allocation to
verify endpoint types before use, rejecting devices with mismatched
descriptors at probe time, and avoid triggering assertion.
Similar fix to
- commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking")
- commit 9e7021d2aeae ("net: usb: catc: enable basic endpoint checking") |
