| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. |
| A flaw was found in dnsmasq. A remote attacker could exploit an out-of-bounds write vulnerability by sending a specially crafted BOOTREPLY (Bootstrap Protocol Reply) packet to a dnsmasq server configured with the `--dhcp-split-relay` option. This can lead to memory corruption, causing the dnsmasq daemon to crash and resulting in a denial of service (DoS). |
| accel-ppp before 1.15.0 contains a heap buffer overflow vulnerability in the tcp, syslog and pgsql log targets that allows unauthenticated remote peers to overflow fixed heap buffers by producing log lines exceeding LOG_MAX_SIZE. Attackers within client-ip-range can send an L2TP Start-Control-Connection-Request with many string AVPs when verbose logging is enabled to corrupt heap memory and crash the daemon. |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, msrp_parse_buffer() subtracted delimiter framing from a peer-controlled short segment whose MSRP byte range ended in * without first proving the segment was long enough. The unsigned result wrapped near SIZE_MAX and reached switch_msrp_msg_set_payload() as both an allocation size and memcpy length, while related pointer arithmetic could read before the receive buffer. The listener is disabled by default in msrp.conf.xml, but any deployment enabling an MSRP TCP or TLS port parses this framing before authentication. An unauthenticated network peer can corrupt memory and crash FreeSWITCH, dropping all active calls, although remote code execution has not been demonstrated. This issue is fixed in version 1.11.2. |
| A stack buffer overflow flaw was found in the GStreamer H.265 codec parser library (gst-plugins-bad). When parsing a buffering period SEI message, the parser uses an incorrect loop bound derived from cpb_cnt_minus1[i] (the loop index) instead of the sub-layer 0 CPB count cpb_cnt_minus1[0] from the referenced Sequence Parameter Set. A crafted H.265 video file or stream can cause the parser to write beyond the bounds of stack-allocated CPB delay arrays, resulting in a crash or potential stack memory corruption. |
| An out-of-bounds write vulnerability was found in GStreamer's H.266/VVC PPS picture partition parser in gst-plugins-bad. In the multi-slice-in-tile processing of gst_h266_parser_parse_picture_partition() (gsth266parser.c), the loop iterates without checking that the slice index stays within bounds, writing past three fixed-size arrays (slice_height_in_ctus, slice_top_left_ctu_x, slice_top_left_ctu_y) in the GstH266PPS structure. While the initial proof-of-concept demonstrated a 4-byte out-of-bounds write, the code permits larger writes across multiple iterations. A crafted H.266/VVC media file can trigger this vulnerability. |
| Apache Kafka's code-generated protocol readers pre-size an array's collection from the element count declared by the sender. That count is checked only against the bytes remaining in the request buffer, which assumes about one byte per element; because most elements need several bytes, a request can declare far more elements than the buffer holds and still pass. For a keyed array the reader then allocates an ImplicitLinkedHashCollection of capacity (2 * count +1), so a request of a few tens of megabytes can force a heap allocation several times larger before any element is read. The pattern is emitted into every generated reader, so it affects all Kafka API types with an array field.
Impact:
Request parsing happens before any authorization check. On a listener that does not require authentication (for example PLAINTEXT), an unauthenticated attacker can send a few concurrent requests that each declare a very large=
array length and allocate many times their wire size in broker heap, crashing the broker with an OutOfMemoryError. The reporter demonstrated three concurrent ~90 MB ProduceRequest (v3) connections exhausting a 1 GB heap (~8x amplification). On listeners that require authentication, the attacker needs valid credentials but no specific ACL, since parsing precedes authorization..
Mitigation:
Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0. Until then, lowering socket.request.max.bytes and restricting network access to broker listeners reduces, but does not remove, exposure.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: generated readers cap the initial array pre-allocation at MessageUtil.MAX_PREALLOCATED_ARRAY_CAPACITY (1000) and grow it on demand, and reject a declared array length above MessageUtil.MAX_ARRAY_LENGTH (1,000,000). |
| A flaw was found in GIMP. This vulnerability, a buffer overflow in the `file-seattle-filmworks` plugin, can be exploited when a user opens a specially crafted Seattle Filmworks file. A remote attacker could leverage this to cause a denial of service (DoS), leading to the plugin crashing and potentially impacting the stability of the GIMP application. |
| A flaw was found in GIMP. A stack buffer overflow vulnerability in the TIM image loader's 4BPP decoding path allows a local user to cause a Denial of Service (DoS). By opening a specially crafted TIM image file, the application crashes due to an unconditional overflow when writing to a variable-length array. |
| A vulnerability was identified in Purocean Yank Note 3.93.0. Affected by this vulnerability is the function checkPermission of the file src/main/server/index.ts of the component Terminal Handler. Such manipulation leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. Upgrading to version 3.93.1 addresses this issue. The name of the patch is 59f85d48f17a70a402ad59dcecacdbec20f954df. Upgrading the affected component is recommended. |
| SQLite before 3.54.0 built with FTS5 contains a heap buffer overflow in fts5MergeRowidLists() that undersizes the output buffer when merging detail=none prefix doclists. Attackers who can populate a detail=none FTS5 table with negative rowids and run a prefix MATCH query can write past the allocation, corrupting heap memory and crashing the process. |
| Node Version Manager (nvm) is a POSIX-compliant shell function for managing multiple node.js versions. In versions 0.31.2 through 0.40.5, `nvm_ls` filters installed versions with a sed program that embeds the requested version pattern in a `\#...#` address, escaping `.` (and, since 0.40.4, `#`) but not backslash. A version string containing `#` (or `\#`) therefore closes the address early, and the rest of it is parsed as sed commands: with GNU sed, the `e` command runs a shell command as the user; with BSD sed, the `w` and `r` commands write and read files. This is reachable whenever an attacker-influenced version string is passed to `nvm use`, `nvm which`, `nvm ls`, `nvm version`, `nvm run`, or `nvm exec`, or to `nvm-exec` via `NODE_VERSION`, and at least one version is installed. nvm's own `.nvmrc` parser strips comments, so a bare `nvm use` is not affected; however, the bash `cdnvm` and zsh `load-nvmrc` auto-switch hooks documented in the README read `.nvmrc` as-is and pass it to `nvm ls` and `nvm version`, so a user with one of those hooks installed runs the attacker's command just by changing into a directory under a malicious `.nvmrc`; scripts that run `nvm use "$(cat .nvmrc)"` are affected the same way. Version 0.40.6 passes any version pattern containing `#` or a newline through the `.nvmrc` content parser first, so no `#` reaches the sed program. |
| FreeSWITCH is an open-source software telecommunications platform. From 1.10.0 until 1.11.1, a stack-based buffer overflow in mod_sofia when generating dialog-event notifications. A peer can establish a dialog with an excessively long SIP To-header user part and subsequently subscribe to that entity’s dialog events, causing the stored value to overflow a fixed-size stack buffer. Exploitation requires presence or shared-appearance management to be enabled and normally requires valid profile credentials, unless subscription authentication is disabled. The overflow can terminate the FreeSWITCH process and all active calls. This vulnerability is fixed in version 1.11.2. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k_htc: Abort software beacon handling if disabled
A malicious USB device can send a WMI_SWBA_EVENTID event from an
ath9k_htc-managed device before beaconing has been enabled. This causes
a device-by-zero error in the driver, leading to either a crash or an
out of bounds read.
Prevent this by aborting the handling in ath9k_htc_swba() if beacons are
not enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: smartpqi: Use is_kdump_kernel() to check for kdump
The smartpqi driver checks the reset_devices variable to determine
whether special adjustments need to be made for kdump. This has the
effect that after a regular kexec reboot, some driver parameters such as
max_transfer_size are much lower than usual. More importantly, kexec
reboot tests have revealed memory corruption caused by the driver log
being written to system memory after a kexec.
Fix this by testing is_kdump_kernel() rather than reset_devices where
appropriate. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/code-patching: Disable KASAN report during patching via temporary mm
Erhard reports the following KASAN hit on Talos II (power9) with kernel 6.13:
[ 12.028126] ==================================================================
[ 12.028198] BUG: KASAN: user-memory-access in copy_to_kernel_nofault+0x8c/0x1a0
[ 12.028260] Write of size 8 at addr 0000187e458f2000 by task systemd/1
[ 12.028346] CPU: 87 UID: 0 PID: 1 Comm: systemd Tainted: G T 6.13.0-P9-dirty #3
[ 12.028408] Tainted: [T]=RANDSTRUCT
[ 12.028446] Hardware name: T2P9D01 REV 1.01 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV
[ 12.028500] Call Trace:
[ 12.028536] [c000000008dbf3b0] [c000000001656a48] dump_stack_lvl+0xbc/0x110 (unreliable)
[ 12.028609] [c000000008dbf3f0] [c0000000006e2fc8] print_report+0x6b0/0x708
[ 12.028666] [c000000008dbf4e0] [c0000000006e2454] kasan_report+0x164/0x300
[ 12.028725] [c000000008dbf600] [c0000000006e54d4] kasan_check_range+0x314/0x370
[ 12.028784] [c000000008dbf640] [c0000000006e6310] __kasan_check_write+0x20/0x40
[ 12.028842] [c000000008dbf660] [c000000000578e8c] copy_to_kernel_nofault+0x8c/0x1a0
[ 12.028902] [c000000008dbf6a0] [c0000000000acfe4] __patch_instructions+0x194/0x210
[ 12.028965] [c000000008dbf6e0] [c0000000000ade80] patch_instructions+0x150/0x590
[ 12.029026] [c000000008dbf7c0] [c0000000001159bc] bpf_arch_text_copy+0x6c/0xe0
[ 12.029085] [c000000008dbf800] [c000000000424250] bpf_jit_binary_pack_finalize+0x40/0xc0
[ 12.029147] [c000000008dbf830] [c000000000115dec] bpf_int_jit_compile+0x3bc/0x930
[ 12.029206] [c000000008dbf990] [c000000000423720] bpf_prog_select_runtime+0x1f0/0x280
[ 12.029266] [c000000008dbfa00] [c000000000434b18] bpf_prog_load+0xbb8/0x1370
[ 12.029324] [c000000008dbfb70] [c000000000436ebc] __sys_bpf+0x5ac/0x2e00
[ 12.029379] [c000000008dbfd00] [c00000000043a228] sys_bpf+0x28/0x40
[ 12.029435] [c000000008dbfd20] [c000000000038eb4] system_call_exception+0x334/0x610
[ 12.029497] [c000000008dbfe50] [c00000000000c270] system_call_vectored_common+0xf0/0x280
[ 12.029561] --- interrupt: 3000 at 0x3fff82f5cfa8
[ 12.029608] NIP: 00003fff82f5cfa8 LR: 00003fff82f5cfa8 CTR: 0000000000000000
[ 12.029660] REGS: c000000008dbfe80 TRAP: 3000 Tainted: G T (6.13.0-P9-dirty)
[ 12.029735] MSR: 900000000280f032 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI> CR: 42004848 XER: 00000000
[ 12.029855] IRQMASK: 0
GPR00: 0000000000000169 00003fffdcf789a0 00003fff83067100 0000000000000005
GPR04: 00003fffdcf78a98 0000000000000090 0000000000000000 0000000000000008
GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR12: 0000000000000000 00003fff836ff7e0 c000000000010678 0000000000000000
GPR16: 0000000000000000 0000000000000000 00003fffdcf78f28 00003fffdcf78f90
GPR20: 0000000000000000 0000000000000000 0000000000000000 00003fffdcf78f80
GPR24: 00003fffdcf78f70 00003fffdcf78d10 00003fff835c7239 00003fffdcf78bd8
GPR28: 00003fffdcf78a98 0000000000000000 0000000000000000 000000011f547580
[ 12.030316] NIP [00003fff82f5cfa8] 0x3fff82f5cfa8
[ 12.030361] LR [00003fff82f5cfa8] 0x3fff82f5cfa8
[ 12.030405] --- interrupt: 3000
[ 12.030444] ==================================================================
Commit c28c15b6d28a ("powerpc/code-patching: Use temporary mm for
Radix MMU") is inspired from x86 but unlike x86 is doesn't disable
KASAN reports during patching. This wasn't a problem at the begining
because __patch_mem() is not instrumented.
Commit 465cabc97b42 ("powerpc/code-patching: introduce
patch_instructions()") use copy_to_kernel_nofault() to copy several
instructions at once. But when using temporary mm the destination is
not regular kernel memory but a kind of kernel-like memory located
in user address space.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd/iova_bitmap: Fix shift-out-of-bounds in iova_bitmap_offset_to_index()
Resolve a UBSAN shift-out-of-bounds issue in iova_bitmap_offset_to_index()
where shifting the constant "1" (of type int) by bitmap->mapped.pgshift
(an unsigned long value) could result in undefined behavior.
The constant "1" defaults to a 32-bit "int", and when "pgshift" exceeds
31 (e.g., pgshift = 63) the shift operation overflows, as the result
cannot be represented in a 32-bit type.
To resolve this, the constant is updated to "1UL", promoting it to an
unsigned long type to match the operand's type. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp_mst: Fix resetting msg rx state after topology removal
If the MST topology is removed during the reception of an MST down reply
or MST up request sideband message, the
drm_dp_mst_topology_mgr::up_req_recv/down_rep_recv states could be reset
from one thread via drm_dp_mst_topology_mgr_set_mst(false), racing with
the reading/parsing of the message from another thread via
drm_dp_mst_handle_down_rep() or drm_dp_mst_handle_up_req(). The race is
possible since the reader/parser doesn't hold any lock while accessing
the reception state. This in turn can lead to a memory corruption in the
reader/parser as described by commit bd2fccac61b4 ("drm/dp_mst: Fix MST
sideband message body length check").
Fix the above by resetting the message reception state if needed before
reading/parsing a message. Another solution would be to hold the
drm_dp_mst_topology_mgr::lock for the whole duration of the message
reception/parsing in drm_dp_mst_handle_down_rep() and
drm_dp_mst_handle_up_req(), however this would require a bigger change.
Since the fix is also needed for stable, opting for the simpler solution
in this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa: Add max vqp attr to vdpa_nl_policy for nlattr length check
The vdpa_nl_policy structure is used to validate the nlattr when parsing
the incoming nlmsg. It will ensure the attribute being described produces
a valid nlattr pointer in info->attrs before entering into each handler
in vdpa_nl_ops.
That is to say, the missing part in vdpa_nl_policy may lead to illegal
nlattr after parsing, which could lead to OOB read just like CVE-2023-3773.
This patch adds the missing nla_policy for vdpa max vqp attr to avoid
such bugs. |
| In the Linux kernel, the following vulnerability has been resolved:
macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFF
The previous commit 954d1fa1ac93 ("macvlan: Add netlink attribute for
broadcast cutoff") added one additional attribute named
IFLA_MACVLAN_BC_CUTOFF to allow broadcast cutfoff.
However, it forgot to describe the nla_policy at macvlan_policy
(drivers/net/macvlan.c). Hence, this suppose NLA_S32 (4 bytes) integer
can be faked as empty (0 bytes) by a malicious user, which could leads
to OOB in heap just like CVE-2023-3773.
To fix it, this commit just completes the nla_policy description for
IFLA_MACVLAN_BC_CUTOFF. This enforces the length check and avoids the
potential OOB read. |
