| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-pl: handle probe errors
Errors in init must be reported back or we'll
follow a NULL pointer the first time FF is used. |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: core: Add locking around 'mfd_of_node_list'
Manipulating a list in the kernel isn't safe without some sort of
mutual exclusion. Add a mutex any time we access / modify
'mfd_of_node_list' to prevent possible crashes. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Check maxfield in hidpp_get_report_length()
Do not crash when a report has no fields.
Fake USB gadgets can send their own HID report descriptors and can define report
structures without valid fields. This can be used to crash the kernel over USB. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx23885: Add missing unmap in snd_cx23885_hw_params()
In error path, add cx23885_alsa_dma_unmap() to release the
resource acquired by cx23885_alsa_dma_map(). |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity: correctly handle dm_bufio_client_create() failure
If either of the calls to dm_bufio_client_create() in verity_fec_ctr()
fails, then dm_bufio_client_destroy() is later called with an ERR_PTR()
argument. That causes a crash. Fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode
Commit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation
request when device is disconnected") relies on
pci_dev_is_disconnected() to skip ATS invalidation for
safely-removed devices, but it does not cover link-down caused
by faults, which can still hard-lock the system.
For example, if a VM fails to connect to the PCIe device,
"virsh destroy" is executed to release resources and isolate
the fault, but a hard-lockup occurs while releasing the group fd.
Call Trace:
qi_submit_sync
qi_flush_dev_iotlb
intel_pasid_tear_down_entry
device_block_translation
blocking_domain_attach_dev
__iommu_attach_device
__iommu_device_set_domain
__iommu_group_set_domain_internal
iommu_detach_group
vfio_iommu_type1_detach_group
vfio_group_detach_container
vfio_group_fops_release
__fput
Although pci_device_is_present() is slower than
pci_dev_is_disconnected(), it still takes only ~70 µs on a
ConnectX-5 (8 GT/s, x2) and becomes even faster as PCIe speed
and width increase.
Besides, devtlb_invalidation_with_pasid() is called only in the
paths below, which are far less frequent than memory map/unmap.
1. mm-struct release
2. {attach,release}_dev
3. set/remove PASID
4. dirty-tracking setup
The gain in system stability far outweighs the negligible cost
of using pci_device_is_present() instead of pci_dev_is_disconnected()
to decide when to skip ATS invalidation, especially under GDR
high-load conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: verify the previous kernel's IMA buffer lies in addressable RAM
Patch series "Address page fault in ima_restore_measurement_list()", v3.
When the second-stage kernel is booted via kexec with a limiting command
line such as "mem=<size>" we observe a pafe fault that happens.
BUG: unable to handle page fault for address: ffff97793ff47000
RIP: ima_restore_measurement_list+0xdc/0x45a
#PF: error_code(0x0000) not-present page
This happens on x86_64 only, as this is already fixed in aarch64 in
commit: cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer
against memory bounds")
This patch (of 3):
When the second-stage kernel is booted with a limiting command line (e.g.
"mem=<size>"), the IMA measurement buffer handed over from the previous
kernel may fall outside the addressable RAM of the new kernel. Accessing
such a buffer can fault during early restore.
Introduce a small generic helper, ima_validate_range(), which verifies
that a physical [start, end] range for the previous-kernel IMA buffer lies
within addressable memory:
- On x86, use pfn_range_is_mapped().
- On OF based architectures, use page_is_ram(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: annotate data-races around hdev->req_status
__hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock:
hdev->req_status = HCI_REQ_PEND;
However, several other functions read or write hdev->req_status without
holding any lock:
- hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue)
- hci_cmd_sync_complete() reads/writes from HCI event completion
- hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write
- hci_abort_conn() reads in connection abort path
Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while
hci_send_cmd_sync() runs on hdev->workqueue, these are different
workqueues that can execute concurrently on different CPUs. The plain
C accesses constitute a data race.
Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses
to hdev->req_status to prevent potential compiler optimizations that
could affect correctness (e.g., load fusing in the wait_event
condition or store reordering). |
| In the Linux kernel, the following vulnerability has been resolved:
x86: shadow stacks: proper error handling for mmap lock
김영민 reports that shstk_pop_sigframe() doesn't check for errors from
mmap_read_lock_killable(), which is a silly oversight, and also shows
that we haven't marked those functions with "__must_check", which would
have immediately caught it.
So let's fix both issues. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Fix errors in IRQ cleanup
IRQs are enabled through sdca_irq_populate() from component probe
using devm_request_threaded_irq(), this however means the IRQs can
persist if the sound card is torn down. Some of the IRQ handlers
store references to the card and the kcontrols which can then
fail. Some detail of the crash was explained in [1].
Generally it is not advised to use devm outside of bus probe, so
the code is updated to not use devm. The IRQ requests are not moved
to bus probe time as it makes passing the snd_soc_component into
the IRQs very awkward and would the require a second step once the
component is available, so it is simpler to just register the IRQs
at this point, even though that necessitates some manual cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
net: af_key: zero aligned sockaddr tail in PF_KEY exports
PF_KEY export paths use `pfkey_sockaddr_size()` when reserving sockaddr
payload space, so IPv6 addresses occupy 32 bytes on the wire. However,
`pfkey_sockaddr_fill()` initializes only the first 28 bytes of
`struct sockaddr_in6`, leaving the final 4 aligned bytes uninitialized.
Not every PF_KEY message is affected. The state and policy dump builders
already zero the whole message buffer before filling the sockaddr
payloads. Keep the fix to the export paths that still append aligned
sockaddr payloads with plain `skb_put()`:
- `SADB_ACQUIRE`
- `SADB_X_NAT_T_NEW_MAPPING`
- `SADB_X_MIGRATE`
Fix those paths by clearing only the aligned sockaddr tail after
`pfkey_sockaddr_fill()`. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: initialize nfgenmsg in NLMSG_DONE terminator
When batching multiple NFLOG messages (inst->qlen > 1), __nfulnl_send()
appends an NLMSG_DONE terminator with sizeof(struct nfgenmsg) payload via
nlmsg_put(), but never initializes the nfgenmsg bytes. The nlmsg_put()
helper only zeroes alignment padding after the payload, not the payload
itself, so four bytes of stale kernel heap data are leaked to userspace
in the NLMSG_DONE message body.
Use nfnl_msg_put() to build the NLMSG_DONE terminator, which initializes
the nfgenmsg payload via nfnl_fill_hdr(), consistent with how
__build_packet_message() already constructs NFULNL_MSG_PACKET headers. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/uncore: Skip discovery table for offline dies
This warning can be triggered if NUMA is disabled and the system
boots with fewer CPUs than the number of CPUs in die 0.
WARNING: CPU: 9 PID: 7257 at uncore.c:1157 uncore_pci_pmu_register+0x136/0x160 [intel_uncore]
Currently, the discovery table continues to be parsed even if all CPUs
in the associated die are offline. This can lead to an array overflow
at "pmu->boxes[die] = box" in uncore_pci_pmu_register(), which may
trigger the warning above or cause other issues. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Fix minimum RX size check for decryption
The check for the minimum receive buffer size did not take the
tag size into account during decryption. Fix this by adding the
required extra length. |
| In the Linux kernel, the following vulnerability has been resolved:
x86-64: rename misleadingly named '__copy_user_nocache()' function
This function was a masterclass in bad naming, for various historical
reasons.
It claimed to be a non-cached user copy. It is literally _neither_ of
those things. It's a specialty memory copy routine that uses
non-temporal stores for the destination (but not the source), and that
does exception handling for both source and destination accesses.
Also note that while it works for unaligned targets, any unaligned parts
(whether at beginning or end) will not use non-temporal stores, since
only words and quadwords can be non-temporal on x86.
The exception handling means that it _can_ be used for user space
accesses, but not on its own - it needs all the normal "start user space
access" logic around it.
But typically the user space access would be the source, not the
non-temporal destination. That was the original intention of this,
where the destination was some fragile persistent memory target that
needed non-temporal stores in order to catch machine check exceptions
synchronously and deal with them gracefully.
Thus that non-descriptive name: one use case was to copy from user space
into a non-cached kernel buffer. However, the existing users are a mix
of that intended use-case, and a couple of random drivers that just did
this as a performance tweak.
Some of those random drivers then actively misused the user copying
version (with STAC/CLAC and all) to do kernel copies without ever even
caring about the exception handling, _just_ for the non-temporal
destination.
Rename it as a first small step to actually make it halfway sane, and
change the prototype to be more normal: it doesn't take a user pointer
unless the caller has done the proper conversion, and the argument size
is the full size_t (it still won't actually copy more than 4GB in one
go, but there's also no reason to silently truncate the size argument in
the caller).
Finally, use this now sanely named function in the NTB code, which
mis-used a user copy version (with STAC/CLAC and all) of this interface
despite it not actually being a user copy at all. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: always drain queued discard work in ext4_mb_release()
While reviewing recent ext4 patch[1], Sashiko raised the following
concern[2]:
> If the filesystem is initially mounted with the discard option,
> deleting files will populate sbi->s_discard_list and queue
> s_discard_work. If it is then remounted with nodiscard, the
> EXT4_MOUNT_DISCARD flag is cleared, but the pending s_discard_work is
> neither cancelled nor flushed.
[1] https://lore.kernel.org/r/20260319094545.19291-1-qiang.zhang@linux.dev/
[2] https://sashiko.dev/#/patchset/20260319094545.19291-1-qiang.zhang%40linux.dev
The concern was valid, but it had nothing to do with the patch[1].
One of the problems with Sashiko in its current (early) form is that
it will detect pre-existing issues and report it as a problem with the
patch that it is reviewing.
In practice, it would be hard to hit deliberately (unless you are a
malicious syzkaller fuzzer), since it would involve mounting the file
system with -o discard, and then deleting a large number of files,
remounting the file system with -o nodiscard, and then immediately
unmounting the file system before the queued discard work has a change
to drain on its own.
Fix it because it's a real bug, and to avoid Sashiko from raising this
concern when analyzing future patches to mballoc.c. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix not releasing workqueue on .release()
The workqueue associated with an DSA/IAA device is not released when
the object is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: check tdls flag in ieee80211_tdls_oper
When NL80211_TDLS_ENABLE_LINK is called, the code only checks if the
station exists but not whether it is actually a TDLS station. This
allows the operation to proceed for non-TDLS stations, causing
unintended side effects like modifying channel context and HT
protection before failing.
Add a check for sta->sta.tdls early in the ENABLE_LINK case, before
any side effects occur, to ensure the operation is only allowed for
actual TDLS peers. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: set backing store type from query type
bnxt_hwrm_func_backing_store_qcaps_v2() stores resp->type from the
firmware response in ctxm->type and later uses that value to index
fixed backing-store metadata arrays such as ctx_arr[] and
bnxt_bstore_to_trace[].
ctxm->type is fixed by the current backing-store query type and matches
the array index of ctx->ctx_arr. Set ctxm->type from the current loop
variable instead of depending on resp->type.
Also update the loop to advance type from next_valid_type in the for
statement, which keeps the control flow simpler for non-valid and
unchanged entries. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent
ctnetlink_alloc_expect() allocates expectations from a non-zeroing
slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not
present in the netlink message, saved_addr and saved_proto are
never initialized. Stale data from a previous slab occupant can
then be dumped to userspace by ctnetlink_exp_dump_expect(), which
checks these fields to decide whether to emit CTA_EXPECT_NAT.
The safe sibling nf_ct_expect_init(), used by the packet path,
explicitly zeroes these fields.
Zero saved_addr, saved_proto and dir in the else branch, guarded
by IS_ENABLED(CONFIG_NF_NAT) since these fields only exist when
NAT is enabled.
Confirmed by priming the expect slab with NAT-bearing expectations,
freeing them, creating a new expectation without CTA_EXPECT_NAT,
and observing that the ctnetlink dump emits a spurious
CTA_EXPECT_NAT containing stale data from the prior allocation. |
