| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Server-Side Request Forgery (SSRF) vulnerability in Apache Camel A2A component.
This issue affects Apache Camel: from 4.21.0 before 4.22.2.
WebhookUrlValidator classified a push notification webhook host in two places that did not agree. A host written as an IP literal was matched against a list of string prefixes that named the IPv6 unique local range fc00::/7, while a host reached through a name was resolved and the resulting address classified with the InetAddress predicates isLoopbackAddress, isAnyLocalAddress, isLinkLocalAddress and isSiteLocalAddress. Those predicates do not cover the same ground as the prefix list: isSiteLocalAddress reports the deprecated fec0::/10 block and not the fc00::/7 unique local addresses that replaced it, and the JDK carries no predicate for them at all. The same address was therefore accepted or rejected depending on how it was written, and a webhook URL whose host name resolved into fc00::/7 passed a guard that refused the identical address given as a literal. PushNotificationDispatcher then sent the push notification to that address, together with any Authorization header carried in the same configuration, whose scheme and credentials the registering caller supplies. The webhook URL arrives as TaskPushNotificationConfig.url from the caller registering the push notification, so it is attacker-controlled, and allowLocalWebhookUrls is false by default, which is the configuration in which the guard is expected to hold. The response is not relayed back to the caller who registered the configuration, so what the gap yields is a blind outbound HTTPS request from the Camel process to an internal address the guard was written to refuse; reaching a service that way additionally requires that the name resolve into fc00::/7 in the target environment, that an HTTPS service be listening on that address, and that the TLS handshake succeed for the name being requested, which is why the severity is assessed medium. The same string pre-check was also wrong in the other direction: it matched the raw host string without first establishing that the host was an IP literal, so any name merely beginning with fc or fd, such as fcm.googleapis.com, was refused outright.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. The 4.21.x release line reached end of life before this issue was resolved and will not receive a fix, so deployments on it must move to a supported release. Both the literal and the resolved path now classify the address from its raw bytes with one shared classifier, which recognises fc00::/7 and the shared address space 100.64.0.0/10, as well as IPv4-compatible, NAT64 (64:ff9b::/96) and 6to4 (2002::/16) addresses whose embedded IPv4 address is not globally routable. For deployments that cannot upgrade immediately, place authentication in front of the A2A push notification configuration path so that the webhook URL does not arrive from an untrusted caller, and deny egress from the Camel process to fc00::/7 at the network level; where the deployment has no need of IPv6, starting the JVM with -Djava.net.preferIPv4Stack=true removes the address class the gap turns on. Note that allowLocalWebhookUrls=false is already the default and does not by itself close the gap. |
| In apache-airflow-providers-ssh before 7.0.1, SSHRemoteJobOperator quoted the values of its templated `environment` parameter only once, although they are placed inside an already-quoted wrapper script, so shell syntax such as `$(...)` in a value was executed on the remote SSH host. In a Dag that passes trigger-time input such as `params` or `dag_run.conf` into `environment`, a user who can trigger that Dag but cannot author Dags could run arbitrary commands on the remote host as the SSH connection's user. Users are advised to upgrade apache-airflow-providers-ssh to 7.0.1 or later. |
| Vulnerability in the SQL storage module of Apache SIS. When sorting a stream of features, the clause is copied after ORDER BY without quoting the identifier character. A crafter sort clause could inject SQL in the query.
This issue affects the sql-storage module of Apache SIS from version 1.0 through 1.6 inclusive. Other modules such as sis-referencing are not impacted. Users are recommended to upgrade to version 1.7, which fixes the issue. |
| Apache Traffic Server can return an origin connection to the shared pool while the origin is still waiting on a request body the client declared but never fully sent, including when the client used Expect: 100-continue. The origin then reads a later request on that connection as leftover body data, which lets an attacker smuggle requests past ATS access controls, disrupt other users' requests, or poison the cache.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| When a client sends a POST with Expect: 100-continue and the origin answers before reading the body, Apache Traffic Server parses the unread body left on the client connection as the next request. An attacker behind a front-end proxy that shares connections to Traffic Server can use this to smuggle requests past the front end and desynchronize responses for other users.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| Apache Traffic Server allows request smuggling via HEAD requests that carry Content-Length or Transfer-Encoding.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| The Apache Airflow SSH provider hook disables SSH host-key verification by default: unless `host_key` is configured or `no_host_key_check` is explicitly set to false, it accepts any server key. This affects SSH and SFTP connections that rely on the default. An attacker in a machine-in-the-middle position between the worker and the SSH or SFTP server can impersonate the server and capture the credentials or data a task sends.
Users of apache-airflow-providers-ssh and apache-airflow-providers-sftp are recommended to upgrade to apache-airflow-providers-ssh 7.0.0 and apache-airflow-providers-sftp 7.0.0 or later. The deferrable SFTP code paths had the same default and are covered separately by CVE-2026-94135; apache-airflow-providers-sftp 7.0.0 fixes both. |
| Use of Cache Containing Sensitive Information vulnerability in Apache Camel Oauth component.
This issue affects Apache Camel: from 4.19.0 before 4.22.2.
OAuthClientCredentialsTokenResolver obtains OAuth 2.0 bearer tokens through the client credentials grant on behalf of the components that authenticate their outbound calls with a named OAuth profile, such as camel-openai, camel-langchain4j-agent, camel-huggingface, camel-docling, camel-a2a, camel-spring-ai-chat and the IBM watsonx components, and of applications that call the OAuthClientAuthenticationFactory SPI directly. It kept the tokens it obtained in a static cache shared by every resolver instance and every CamelContext in the JVM, and keyed that cache on the token endpoint and the client ID only, although the token request also carries the client secret and the requested scope. Two profiles that share a token endpoint and a client ID but request different scopes, or authenticate with different client secrets, therefore mapped to the same cache entry: the profile that resolved a token first populated the entry, and the other profile was then handed that token, with no token request made under its own configuration, for as long as the token remained valid. Token caching is enabled by default, and pointing several profiles at one identity provider client is an ordinary use of the profile support rather than an opt-in to an insecure setting. The outcome is an outbound request that carries a token issued for another profile's scope, which can grant broader authority than the calling profile was configured for, or reach a service the token was not issued for; with identity providers that derive a token's audience from the requested scope, a different scope can mean a token for a different service altogether. A profile configured with a different client secret was likewise served the token obtained with the other secret, without authenticating with its own. The profiles are configured by the deployment, which is trusted, so no untrusted input reaches the cache: the party that gains is the service that receives a token it was not meant to receive, which, if hostile or compromised, can replay that token within its scope. Reaching the issue requires a deployment that defines more than one profile sharing a token endpoint and client ID while differing in scope or client secret.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. The 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, disable token caching on every OAuth profile that shares a token endpoint and client ID with another profile, by setting camel.oauth.NAME.cache-tokens=false for a named profile or camel.oauth.cache-tokens=false for the default one, so that each resolution requests a token with that profile’s own scope and client secret, at the cost of a token request on every resolution. Alternatively, register a separate client at the identity provider for each profile that needs a different scope or client secret, so that no two such profiles share a client ID. |
| Improper Restriction of XML External Entity Reference vulnerability in Apache Camel Saxon component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.2.
XQueryBuilder in camel-saxon, which evaluates expressions for the xquery language and the xquery component, built its default Saxon Configuration with parse options that set only a whitespace stripping rule, leaving the XML parser at its defaults, under which a DOCTYPE declaration is accepted and external entities are resolved. A message body of type String or byte[], or any body read as an InputStream, is first turned into a javax.xml.transform.Source by Camel's own XML type converters, which configure the parser against external entities, so those bodies were not affected. A body that was already a Source, however, was handed to Saxon unchanged, and when that Source still had to be parsed, as a stream-based Source does, Saxon parsed it with that Configuration, bypassing the protection applied to the other body types. Such a body arises, for example, after a route converts the message with convertBodyTo(Source.class), or when a component or processor earlier in the route sets the body to a stream-based Source. A DOCTYPE with an external subset, or an external entity, declared in that body was therefore resolved and expanded into the document the expression was evaluated against. An external sender whose XML reaches an XQuery expression or an xquery endpoint in that form could read files readable by the Camel process and cause the process to issue requests to hosts the document names. No non-default option is required, since the default Configuration is used whenever the route does not supply one of its own.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, as well as the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not evaluate XQuery over a message body that is already a javax.xml.transform.Source when that body carries XML from an untrusted sender, or set the configuration option of the xquery endpoint or language to a Saxon Configuration whose parse options refuse a DOCTYPE declaration and disable external entities and external DTD loading, which is what the fixed releases now apply by default. |
| When package management is enabled, Pulsar Functions, Sources and Sinks can be registered or updated from a package stored in the Pulsar Packages Management Service by supplying a package URL. The Pulsar Functions worker authorized these requests only against the namespace in which the component was being registered or updated. It did not check whether the requesting user was permitted to access packages in the namespace that the package URL refers to, and it retrieved the package from the broker using the worker's own credentials. The permission check of the Packages Management Service was therefore applied to the worker's identity instead of the requesting user's. Package URLs of transform functions supplied when registering or updating a sink were handled in the same way.
An authenticated user who is permitted to register or update functions, sources or sinks in any namespace of their own tenant could use this to obtain the contents of a package stored in a namespace of another tenant, without having the packages permission on that namespace. The impact is limited to disclosure of package contents, which may include application code, business logic or embedded credentials. The issue does not allow packages to be modified or deleted and does not affect availability.
This issue only affects deployments that have authentication and authorization enabled and in which package management has been enabled: the broker setting enablePackagesManagement and, in current releases, the functions worker setting functionsWorkerEnablePackageManagement. Both settings are disabled by default.
This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14, from 4.1.0 through 4.1.3, and from 4.2.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. |
| The MySQL client response parser in Apache bRPC dereferences a null pointer when the server peer sends a zero-payload-length response packet. A response packet whose declared payload length is zero is accepted by the frame-length check (is_full_package), after which the parser reads the response type byte via an unbounded 5-byte fetch that returns nullptr, and type = p[4] dereferences it, crashing the client process.
Root Cause: In brpc::policy::MysqlReply::ConsumePartialIOBuf, buf.fetch(header, 5) returns nullptr when the buffered data only holds the 4-byte header of a zero-length packet, then the code reads p[4] (and, in the fast-auth path, p2[4]) without checking for a null or zero-length packet.
Affected Scenarios: A brpc MySQL client connecting to a malicious or compromised MySQL server (or a MITM) can be crashed by a zero-length server response packet, resulting in denial of service of the client.
Fix: The fix rejects zero-length response packets (returning PARSE_ERROR_ABSOLUTELY_WRONG) both for the initial response type determination and after a fast-auth marker, before reading the type byte. Upgrade to the Apache bRPC version 1.18.0 or apply the PR patch at https://github.com/apache/brpc/pull/3536. |
| The Discovery naming-service reply parser in Apache bRPC (versions < 1.18.0) calls RapidJSON object-only accessors (FindMember) on JSON values without first validating that those values are objects. A malformed Discovery response whose data/service members or instances list contain non-object entries (e.g. a bare integer) triggers the RapidJSON object-access precondition on the client, reading memory out of bounds and potentially crashing the bRPC client.
Root Cause:
In src/brpc/policy/discovery_naming_service.cpp, DiscoveryNamingService::GetServers() and DiscoveryNames::ListDiscoveryNodes() access JSON values with member functions on non-object values. RapidJSON only defines these operations for object types; invoking them on a non-object violates the class invariant and results in undefined behavior (out-of-bounds read), commonly crashing the process.
Affected Scenarios:
An operator-configured (or compromised) Discovery backend returns a malformed /discovery/nodes or /discovery/fetchs response whose data/service/instance entries are not JSON objects, crashing any bRPC client that refreshes its server list.
How to Fix:
1. Upgrade bRPC to version 1.18.0 or later, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3533
The fix validates that the Discovery response data, per-service data, and instance entries are JSON objects (and skips non-object node/instance entries and rejects non-object data/service values) before calling member accessors. |
| NULL pointer dereference in the RTMP protocol implementation in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to crash the server (denial of service) via a crafted createStream command.
Root Cause:
When an RTMP service rejects a createStream request by returning a null stream from RtmpService::NewStream(), the server sends an error response to the client. If writing this rejection response fails (for example, because the client closes the connection immediately after sending the createStream command), the error-handling path in RtmpChunkStream::OnCreateStream() dereferences the null stream pointer to access stream->_onfail_id, causing the process to crash.
Affected Scenarios:
Run an Apache bRPC RTMP server whose RtmpService::NewStream() may return null (i.e., the service rejects createStream requests). A remote client that sends a createStream command and then closes the connection before the rejection response is written can crash the server.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3508 |
| Uncontrolled resource allocation in the mcpack2pb component in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to make the server allocate a large amount of memory via sending a crafted mcpack request with a huge array item count.
Root Cause:
The bRPC mcpack2pb parser trusts the item count stored in the mcpack array header without validating it against the actual payload size. The code generated by the mcpack2pb protoc plugin uses this count to preallocate memory for repeated protobuf fields via Reserve(). A malformed request declaring item_count = 0x7fffffff can force the server to preallocate about 16GB of virtual memory, which may abort the process (SIGABRT) on memory-constrained hosts.
Affected Scenarios:
Use a bRPC server that wires a NsheadService to UbrpcMcpack2Adaptor (the Baidu ubrpc deployment pattern) and parses requests with code generated by the mcpack2pb protoc plugin. The request body is parsed before authentication.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3451
Note:
No matter which option you choose, you should know that the fix caps the array item count to the remaining bytes of the array payload. |
| A vulnerability in Apache Answer.
This issue affects Apache Answer: through 2.0.2.
A verification code issued for one email-based workflow could be accepted by another sensitive workflow because the code purpose was not properly enforced.
Users are recommended to upgrade to version 2.0.3, which fixes the issue. |
| Out-of-bounds read and write in the Count-Min sketch deserialization of Apache DataSketches C++ (repo: datasketches-cpp).
count_min_sketch::deserialize() did not include the preamble in its input size check, so a truncated sketch could cause a read of up to 16 bytes past the end of the input. In addition, the table size was computed from the serialized number of buckets and number of hash functions in 32-bit arithmetic. A crafted sketch could make it wrap to zero, so that the sketch deserialized with an empty table, and later updates and estimate queries read and wrote outside the heap allocation. This can corrupt heap memory, causing a crash and potentially enabling further exploitation.
This issue affects Apache DataSketches C++: from 4.1.0 before 5.3.0. Only applications that deserialize Count-Min sketches from untrusted sources are affected.
Users are recommended to upgrade to version 5.3.0, which fixes this issue. |
| Apache Traffic Server's experimental tsmemcache plugin allows unauthenticated network read, write, and deletion of the shared proxy cache.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| Apache Traffic Server's experimental magick plugin lets an unauthenticated client control ImageMagick convert arguments in its default (unsigned) configuration.
This issue affects Apache Traffic Server: from 8.0.1 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| Apache Traffic Server forwarded a malformed 302 response that should have been rejected as a parse error, because the Transfer-Encoding: chunked carve-out bypassed the rejection path. A response that two peers can read differently is then stored and served, allowing cache poisoning and response-framing desync.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| Apache Pulsar allows an administrator to require end-to-end message encryption for all topics in a namespace by setting the encryption_required namespace policy. When this policy is set, the broker rejects messages that are published without encryption.
When the broker loads a persistent topic, it reads the namespace policies and the topic-level policies as part of topic initialization. If a step of this initialization fails, for example because of an error reading from the metadata store, a failure loading the topic-level policies or a failure in a later initialization step, the broker logs a warning, disables the encryption requirement for that topic, and completes the topic load as if it had succeeded. The topic is then served with encryption_required not enforced, even though the namespace policy requires it. Topic-level policies that could not be loaded are also not applied.
While the encryption requirement is not enforced, an authenticated client with permission to produce to the affected topic can publish messages that are not encrypted, and the broker accepts and stores them. This applies both to producers created after the topic was loaded and to producers that were already connected. Messages published with encryption remain encrypted; the issue does not expose the content of encrypted messages or the encryption keys.
The condition is not limited to transient failures. If the cause of the initialization failure persists, the encryption requirement is disabled again each time the topic is loaded, for example after a topic unload, a namespace bundle reassignment or a broker restart. An update to the namespace policies restores enforcement on a loaded topic, but only until the topic is loaded again. Enforcement is reliably restored only once the underlying cause of the failure has been resolved and the topic has been loaded again. The broker logs a warning when the encryption requirement is disabled, but the topic load is reported as successful and the state of the encryption requirement is not shown in the topic statistics.
In fixed versions, a failure during topic initialization causes the topic load to fail so that it can be retried, instead of loading the topic with the encryption requirement disabled.
This issue affects Apache Pulsar versions from 1.22.0-incubating before 4.0.14 and from 4.1.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.
Users who rely on encryption_required and cannot upgrade immediately can monitor the broker logs for warnings containing "isEncryptionRequired will be set to false" (the exact wording of the message differs between releases), resolve the underlying cause of the failure, and then reload the affected topic and confirm that the warning does not recur. |
