| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Due to an unchecked buffer length, a specially crafted L2CAP packet can cause a buffer overflow. This buffer overflow triggers an assert, which results in a temporary denial of service.
If a watchdog timer is not enabled, a hard reset is required to recover the device. |
| A Out-of-bounds Write issue affecting the v2_sdk_service running on a set of DJI drone devices on the port 10000 could allow an attacker to overwrite a pointer in the process memory through a crafted payload triggering an unsafe memory write operation in the my_tcp_receive function implemented in the libv2_sdk.so library used by the dji_vtwo_sdk binary implementing the service, potentially leading to a memory information leak or to an arbitrary code execution. Affected models are Mavic 3 Pro until v01.01.0300, Mavic 3 until v01.00.1200, Mavic 3 Classic until v01.00.0500, Mavic 3 Enterprise until v07.01.10.03, Matrice 300 until v57.00.01.00, Matrice M30 until v07.01.0022 and Mini 3 Pro until v01.00.0620. |
| Arcane Software’s Vermillion FTP Daemon (vftpd) versions up to and including 1.31 contains a memory corruption vulnerability triggered by a malformed FTP PORT command. The flaw arises from an out-of-bounds array access during input parsing, allowing an attacker to manipulate stack memory and potentially execute arbitrary code. Exploitation requires direct access to the FTP service and is constrained by a single execution attempt if the daemon is installed as a Windows service. |
| Contec Health CMS8000 Patient Monitor is vulnerable to an out-of-bounds write, which could allow an attacker to send specially formatted UDP requests in order to write arbitrary data. This could result in remote code execution. |
| An out-of-bounds write vulnerability exists in the
cv_upgrade_sensor_firmware functionality of Dell ControlVault3 prior to 5.15.10.14 and Dell ControlVault 3 Plus prior to 6.2.26.36.
A specially crafted ControlVault API call can lead to an out-of-bounds
write. An attacker can issue an API call to trigger this vulnerability. |
| Out-of-bounds write in the memory subsystem for some Intel(R) Xeon(R) 6 processors when using Intel(R) SGX or Intel(R) TDX may allow a privileged user to potentially enable escalation of privilege via local access. |
| Insufficient bounds checking in AMD TEE (Trusted Execution Environment) could allow an attacker with a compromised userspace to invoke a command with malformed arguments leading to out of bounds memory access, potentially resulting in loss of integrity or availability. |
| Dotmesh is a git-like command-line interface for capturing, organizing and sharing application states. In versions 0.8.1 and prior, the unsafe handling of symbolic links in an unpacking routine may
enable attackers to read and/or write to arbitrary locations outside the
designated target folder. The routine `untarFile` attempts to guard against creating symbolic links that point outside the directory a tar archive is extracted to. However, a malicious tarball first linking `subdir/parent` to `..` (allowed, because `subdir/..` falls within the archive root) and then linking `subdir/parent/escapes` to `..` results in a symbolic link pointing to the tarball’s parent directory, contrary to the routine’s goals. This issue may lead to arbitrary file write (with same permissions as the program running the unpack operation) if the attacker can control the archive file. Additionally, if the attacker has read access to the unpacked files, they may be able to read arbitrary system files the parent process has permissions to read. As of time of publication, no patch for this issue is available.
|
| COMMAX WebViewer ActiveX Control 2.1.4.5 contains a buffer overflow vulnerability that allows attackers to execute arbitrary code by providing excessively long string arrays through multiple functions. Attackers can exploit boundary errors in Commax_WebViewer.ocx to cause buffer overflow conditions and potentially gain code execution. |
| Kingdia CD Extractor 3.0.2 contains a buffer overflow vulnerability in the registration name field that allows attackers to execute arbitrary code. Attackers can craft a malicious payload exceeding 256 bytes to overwrite Structured Exception Handler and gain remote code execution through a bind shell. |
| COMMAX UMS Client ActiveX Control 1.7.0.2 contains a heap-based buffer overflow vulnerability that allows attackers to execute arbitrary code by providing excessively long string arrays through multiple functions. Attackers can exploit improper boundary validation in CNC_Ctrl.dll to cause heap corruption and potentially gain system-level access. |
| Insufficient input validation in the ABL may allow a privileged
attacker with access to the BIOS menu or UEFI shell to tamper with the
structure headers in SPI ROM causing an out of bounds memory read and write,
potentially resulting in memory corruption or denial of service. |
| YouTube Video Grabber, now referred to as YouTube Downloader, 1.9.9.1 contains a buffer overflow vulnerability that allows attackers to execute arbitrary code by overwriting the Structured Exception Handler. Attackers can craft a malicious payload of 712 bytes with SEH manipulation to trigger a bind shell connection on a specified local port. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that all image channels have the same pixel type (and size), and that if there are four channels, the first four are "B", "G", "R" and "A". The channel parsing code can be found in decode_header. The buffer td->uncompressed_data is allocated in decode_block based on the xsize, ysize and computed current_channel_offset.
The function dwa_uncompress then assumes at [5] that if there are 4 channels, these are "B", "G", "R" and "A", and in the calculations at [6] and [7] that all channels are of the same type, which matches the type of the main color channels.
If we set the main color channels to a 4-byte type and add duplicate or unknown channels of the 2-byte EXR_HALF type, then the addition at [7] will increment the pointer by 4-bytes * xsize * nb_channels, which will exceed the allocated buffer.
We recommend upgrading to version 8.0 or beyond. |
| Out-of-bounds write in UEFI firmware for some Intel(R) Processors may allow a privileged user to potentially enable escalation of privilege via local access. |
| An out-of-bounds write in VirtIO network device emulation in BitVisor from commit 108df6 (2020-05-20) to commit 480907 (2025-07-06) allows local attackers to cause a denial of service (host hypervisor crash) via a crafted PCI configuration space access. Given it's a heap overflow in a privileged hypervisor context, exploitation may enable arbitrary code execution or guest-to-host privilege escalation. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that the height and width are divisible by 8.
If the height or width of the image is not divisible by 8, the copy loops at [0] and [1] will continue to write until the next multiple of 8.
The buffer td->uncompressed_data is allocated in decode_block based on the precise height and width of the image, so the "rounded-up" multiple of 8 in the copy loop can exceed the buffer bounds, and the write block starting at [2] can corrupt following heap memory.
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, the specified raw length of run-length-encoded data is not checked when using it to calculate the output data.
We read rle_raw_size from the input file at [0], we decompress and decode into the buffer td->rle_raw_data of size rle_raw_size at [1], and then at [2] we will access entries in this buffer up to (td->xsize - 1) * (td->ysize - 1) + rle_raw_size / 2, which may exceed rle_raw_size.
We recommend upgrading to version 8.0 or beyond. |
| When decoding a frame for a SANM file (ANIM v0 variant), the decoded data can be larger than the buffer allocated for it.
Frames encoded with codec 48 can specify their resolution (width x height). A buffer of appropriate size is allocated depending on the resolution.
This codec can encode the frame contents using a run-length encoding algorithm. There are no checks that the decoded frame fits in the allocated buffer, leading to a heap-buffer-overflow.
process_frame_obj initializes the buffers based on the frame resolution:
We recommend upgrading to version 8.0 or beyond. |
| When parsing the header for a DHAV file, there's an integer underflow in offset calculation that leads to reading the duration from before the start of the allocated buffer.
If we load a DHAV file that is larger than MAX_DURATION_BUFFER_SIZE bytes (0x100000) for example 0x101000 bytes, then at [0] we have size = 0x101000. At [1] we have end_buffer_size = 0x100000, and at [2] we have end_buffer_pos = 0x1000.
The loop then scans backwards through the buffer looking for the dhav tag; when it is found, we'll calculate end_pos based on a 32-bit offset read from the buffer.
There is subsequently a check [3] that end_pos is within the section of the file that has been copied into end_buffer, but it only correctly handles the cases where end_pos is before the start of the file or after the section copied into end_buffer, and not the case where end_pos is within the the file, but before the section copied into end_buffer. If we provide such an offset, (end_pos - end_buffer_pos) can underflow, resulting in the subsequent access at [4] occurring before the beginning of the allocation.
We recommend upgrading to version 8.0 or beyond. |
