| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vulnerability in the Oracle Java SE, Oracle GraalVM Enterprise Edition, Oracle GraalVM for JDK product of Oracle Java SE (component: Hotspot). Supported versions that are affected are Oracle Java SE: 8u371, 8u371-perf, 11.0.19, 17.0.7, 20.0.1; Oracle GraalVM Enterprise Edition: 20.3.10, 21.3.6, 22.3.2; Oracle GraalVM for JDK: 17.0.7 and 20.0.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM Enterprise Edition, Oracle GraalVM for JDK. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Java SE, Oracle GraalVM Enterprise Edition, Oracle GraalVM for JDK accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 3.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: inside-secure/eip93 - unregister only available algorithm
EIP93 has an options register. This register indicates which crypto
algorithms are implemented in silicon. Supported algorithms are
registered on this basis. Unregister algorithms on the same basis.
Currently, all algorithms are unregistered, even those not supported
by HW. This results in panic on platforms that don't have all options
implemented in silicon. |
| In the Linux kernel, the following vulnerability has been resolved:
mctp i2c: initialise event handler read bytes
Set a 0xff value for i2c reads of an mctp-i2c device. Otherwise reads
will return "val" from the i2c bus driver. For i2c-aspeed and
i2c-npcm7xx that is a stack uninitialised u8.
Tested with "i2ctransfer -y 1 r10@0x34" where 0x34 is a mctp-i2c
instance, now it returns all 0xff. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: inside-secure/eip93 - fix kernel panic in driver detach
During driver detach, the same hash algorithm is unregistered multiple
times due to a wrong iterator. |
| The issue was addressed with improved memory handling. This issue is fixed in Safari 18.2, iOS 18.2 and iPadOS 18.2, iPadOS 17.7.6, macOS Sequoia 15.2, tvOS 18.2, visionOS 2.2, watchOS 11.2. Processing maliciously crafted web content may lead to an unexpected process crash. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't zero the entire extent if EXT4_EXT_DATA_PARTIAL_VALID1
When allocating initialized blocks from a large unwritten extent, or
when splitting an unwritten extent during end I/O and converting it to
initialized, there is currently a potential issue of stale data if the
extent needs to be split in the middle.
0 A B N
[UUUUUUUUUUUU] U: unwritten extent
[--DDDDDDDD--] D: valid data
|<- ->| ----> this range needs to be initialized
ext4_split_extent() first try to split this extent at B with
EXT4_EXT_DATA_ENTIRE_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, but
ext4_split_extent_at() failed to split this extent due to temporary lack
of space. It zeroout B to N and mark the entire extent from 0 to N
as written.
0 A B N
[WWWWWWWWWWWW] W: written extent
[SSDDDDDDDDZZ] Z: zeroed, S: stale data
ext4_split_extent() then try to split this extent at A with
EXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and left
a stale written extent from 0 to A.
0 A B N
[WW|WWWWWWWWWW]
[SS|DDDDDDDDZZ]
Fix this by pass EXT4_EXT_DATA_PARTIAL_VALID1 to ext4_split_extent_at()
when splitting at B, don't convert the entire extent to written and left
it as unwritten after zeroing out B to N. The remaining work is just
like the standard two-part split. ext4_split_extent() will pass the
EXT4_EXT_DATA_VALID2 flag when it calls ext4_split_extent_at() for the
second time, allowing it to properly handle the split. If the split is
successful, it will keep extent from 0 to A as unwritten. |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netback: reject zero-queue configuration from guest
A malicious or buggy Xen guest can write "0" to the xenbus key
"multi-queue-num-queues". The connect() function in the backend only
validates the upper bound (requested_num_queues > xenvif_max_queues)
but not zero, allowing requested_num_queues=0 to reach
vzalloc(array_size(0, sizeof(struct xenvif_queue))), which triggers
WARN_ON_ONCE(!size) in __vmalloc_node_range().
On systems with panic_on_warn=1, this allows a guest-to-host denial
of service.
The Xen network interface specification requires
the queue count to be "greater than zero".
Add a zero check to match the validation already present
in xen-blkback, which has included this
guard since its multi-queue support was added. |
| In the Linux kernel, the following vulnerability has been resolved:
quota: fix livelock between quotactl and freeze_super
When a filesystem is frozen, quotactl_block() enters a retry loop
waiting for the filesystem to thaw. It acquires s_umount, checks the
freeze state, drops s_umount and uses sb_start_write() - sb_end_write()
pair to wait for the unfreeze.
However, this retry loop can trigger a livelock issue, specifically on
kernels with preemption disabled.
The mechanism is as follows:
1. freeze_super() sets SB_FREEZE_WRITE and calls sb_wait_write().
2. sb_wait_write() calls percpu_down_write(), which initiates
synchronize_rcu().
3. Simultaneously, quotactl_block() spins in its retry loop, immediately
executing the sb_start_write() - sb_end_write() pair.
4. Because the kernel is non-preemptible and the loop contains no
scheduling points, quotactl_block() never yields the CPU. This
prevents that CPU from reaching an RCU quiescent state.
5. synchronize_rcu() in the freezer thread waits indefinitely for the
quotactl_block() CPU to report a quiescent state.
6. quotactl_block() spins indefinitely waiting for the freezer to
advance, which it cannot do as it is blocked on the RCU sync.
This results in a hang of the freezer process and 100% CPU usage by the
quota process.
While this can occur intermittently on multi-core systems, it is
reliably reproducing on a node with the following script, running both
the freezer and the quota toggle on the same CPU:
# mkfs.ext4 -O quota /dev/sda 2g && mkdir a_mount
# mount /dev/sda -o quota,usrquota,grpquota a_mount
# taskset -c 3 bash -c "while true; do xfs_freeze -f a_mount; \
xfs_freeze -u a_mount; done" &
# taskset -c 3 bash -c "while true; do quotaon a_mount; \
quotaoff a_mount; done" &
Adding cond_resched() to the retry loop fixes the issue. It acts as an
RCU quiescent state, allowing synchronize_rcu() in percpu_down_write()
to complete. |
| Improper input validation in Microsoft Office SharePoint allows an unauthorized attacker to perform spoofing over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: equilibrium: fix warning trace on load
The callback functions 'eqbr_irq_mask()' and 'eqbr_irq_ack()' are also
called in the callback function 'eqbr_irq_mask_ack()'. This is done to
avoid source code duplication. The problem, is that in the function
'eqbr_irq_mask()' also calles the gpiolib function 'gpiochip_disable_irq()'
This generates the following warning trace in the log for every gpio on
load.
[ 6.088111] ------------[ cut here ]------------
[ 6.092440] WARNING: CPU: 3 PID: 1 at drivers/gpio/gpiolib.c:3810 gpiochip_disable_irq+0x39/0x50
[ 6.097847] Modules linked in:
[ 6.097847] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.59+ #0
[ 6.097847] Tainted: [W]=WARN
[ 6.097847] RIP: 0010:gpiochip_disable_irq+0x39/0x50
[ 6.097847] Code: 39 c6 48 19 c0 21 c6 48 c1 e6 05 48 03 b2 38 03 00 00 48 81 fe 00 f0 ff ff 77 11 48 8b 46 08 f6 c4 02 74 06 f0 80 66 09 fb c3 <0f> 0b 90 0f 1f 40 00 c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40
[ 6.097847] RSP: 0000:ffffc9000000b830 EFLAGS: 00010046
[ 6.097847] RAX: 0000000000000045 RBX: ffff888001be02a0 RCX: 0000000000000008
[ 6.097847] RDX: ffff888001be9000 RSI: ffff888001b2dd00 RDI: ffff888001be02a0
[ 6.097847] RBP: ffffc9000000b860 R08: 0000000000000000 R09: 0000000000000000
[ 6.097847] R10: 0000000000000001 R11: ffff888001b2a154 R12: ffff888001be0514
[ 6.097847] R13: ffff888001be02a0 R14: 0000000000000008 R15: 0000000000000000
[ 6.097847] FS: 0000000000000000(0000) GS:ffff888041d80000(0000) knlGS:0000000000000000
[ 6.097847] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.097847] CR2: 0000000000000000 CR3: 0000000003030000 CR4: 00000000001026b0
[ 6.097847] Call Trace:
[ 6.097847] <TASK>
[ 6.097847] ? eqbr_irq_mask+0x63/0x70
[ 6.097847] ? no_action+0x10/0x10
[ 6.097847] eqbr_irq_mask_ack+0x11/0x60
In an other driver (drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c) the
interrupt is not disabled here.
To fix this, do not call the 'eqbr_irq_mask()' and 'eqbr_irq_ack()'
function. Implement instead this directly without disabling the interrupts. |
| OpenCTI is an open source platform for managing cyber threat intelligence knowledge and observables. Prior to 6.9.7, an organization admin can escalate their privileges by adding a user from a different organization with higher privileges, to their own organization. This is due to incorrect ACL on userEdit relationAdd. This vulnerability is fixed in 6.9.7. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (powerz) Fix missing usb_kill_urb() on signal interrupt
wait_for_completion_interruptible_timeout() returns -ERESTARTSYS when
interrupted. This needs to abort the URB and return an error. No data
has been received from the device so any reads from the transfer
buffer are invalid.
The original code tests !ret, which only catches the timeout case (0).
On signal delivery (-ERESTARTSYS), !ret is false so the function skips
usb_kill_urb() and falls through to read from the unfilled transfer
buffer.
Fix by capturing the return value into a long (matching the function
return type) and handling signal (negative) and timeout (zero) cases
with separate checks that both call usb_kill_urb() before returning. |
| Unspecified vulnerability in IBM Java 8 before SR1 allows remote attackers to cause a denial of service via unknown vectors related to SSL/TLS and the Secure Socket Extension provider. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public()
tpm2_read_public() calls tpm_buf_init() but fails to call
tpm_buf_destroy() on two exit paths, leaking a page allocation:
1. When name_size() returns an error (unrecognized hash algorithm),
the function returns directly without destroying the buffer.
2. On the success path, the buffer is never destroyed before
returning.
All other error paths in the function correctly call
tpm_buf_destroy() before returning.
Fix both by adding the missing tpm_buf_destroy() calls. |
| Improper input validation in Azure Virtual Network Gateway allows an authorized attacker to execute code over a network. |
| Improper authentication in Azure Resource Manager (ARM) allows an unauthorized attacker to elevate privileges over a network. |
| Unspecified vulnerability in IBM Java 8 before SR1, 7 R1 before SR2 FP11, 7 before SR9, 6 R1 before SR8 FP4, 6 before SR16 FP4, and 5.0 before SR16 FP10 allows remote attackers to gain privileges via unknown vectors related to the Java Virtual Machine. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Security). Supported versions that are affected are Oracle Java SE: 8u341, 8u345-perf, 11.0.16.1; Oracle GraalVM Enterprise Edition: 20.3.7, 21.3.3 and 22.2.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTPS to compromise Oracle Java SE, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM Enterprise Edition. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability can also be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L). |
| Vulnerability in the Oracle Java SE, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Security). Supported versions that are affected are Oracle Java SE: 8u341, 8u345-perf, 11.0.16.1, 17.0.4.1, 19; Oracle GraalVM Enterprise Edition: 20.3.7, 21.3.3 and 22.2.0. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability can also be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. CVSS 3.1 Base Score 3.7 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N). |
| Vulnerability in the Oracle Java SE, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Libraries). Supported versions that are affected are Oracle Java SE: 17.0.3.1; Oracle GraalVM Enterprise Edition: 21.3.2 and 22.1.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability can also be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. CVSS 3.1 Base Score 5.3 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N). |
