| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: Ensure info->enable callback is always set
The ioctl and sysfs handlers unconditionally call the ->enable callback.
Not all drivers implement that callback, leading to NULL dereferences.
Example of affected drivers: ptp_s390.c, ptp_vclock.c and ptp_mock.c.
Instead use a dummy callback if no better was specified by the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Reject Hyper-V's SEND_IPI hypercalls if local APIC isn't in-kernel
Advertise support for Hyper-V's SEND_IPI and SEND_IPI_EX hypercalls if and
only if the local API is emulated/virtualized by KVM, and explicitly reject
said hypercalls if the local APIC is emulated in userspace, i.e. don't rely
on userspace to opt-in to KVM_CAP_HYPERV_ENFORCE_CPUID.
Rejecting SEND_IPI and SEND_IPI_EX fixes a NULL-pointer dereference if
Hyper-V enlightenments are exposed to the guest without an in-kernel local
APIC:
dump_stack+0xbe/0xfd
__kasan_report.cold+0x34/0x84
kasan_report+0x3a/0x50
__apic_accept_irq+0x3a/0x5c0
kvm_hv_send_ipi.isra.0+0x34e/0x820
kvm_hv_hypercall+0x8d9/0x9d0
kvm_emulate_hypercall+0x506/0x7e0
__vmx_handle_exit+0x283/0xb60
vmx_handle_exit+0x1d/0xd0
vcpu_enter_guest+0x16b0/0x24c0
vcpu_run+0xc0/0x550
kvm_arch_vcpu_ioctl_run+0x170/0x6d0
kvm_vcpu_ioctl+0x413/0xb20
__se_sys_ioctl+0x111/0x160
do_syscal1_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Note, checking the sending vCPU is sufficient, as the per-VM irqchip_mode
can't be modified after vCPUs are created, i.e. if one vCPU has an
in-kernel local APIC, then all vCPUs have an in-kernel local APIC. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: hub: Ignore non-compliant devices with too many configs or interfaces
Robert Morris created a test program which can cause
usb_hub_to_struct_hub() to dereference a NULL or inappropriate
pointer:
Oops: general protection fault, probably for non-canonical address
0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d #14
Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110
...
Call Trace:
<TASK>
? die_addr+0x31/0x80
? exc_general_protection+0x1b4/0x3c0
? asm_exc_general_protection+0x26/0x30
? usb_hub_adjust_deviceremovable+0x78/0x110
hub_probe+0x7c7/0xab0
usb_probe_interface+0x14b/0x350
really_probe+0xd0/0x2d0
? __pfx___device_attach_driver+0x10/0x10
__driver_probe_device+0x6e/0x110
driver_probe_device+0x1a/0x90
__device_attach_driver+0x7e/0xc0
bus_for_each_drv+0x7f/0xd0
__device_attach+0xaa/0x1a0
bus_probe_device+0x8b/0xa0
device_add+0x62e/0x810
usb_set_configuration+0x65d/0x990
usb_generic_driver_probe+0x4b/0x70
usb_probe_device+0x36/0xd0
The cause of this error is that the device has two interfaces, and the
hub driver binds to interface 1 instead of interface 0, which is where
usb_hub_to_struct_hub() looks.
We can prevent the problem from occurring by refusing to accept hub
devices that violate the USB spec by having more than one
configuration or interface. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Check the return value of of_property_read_string_index()
Somewhen between 6.10 and 6.11 the driver started to crash on my
MacBookPro14,3. The property doesn't exist and 'tmp' remains
uninitialized, so we pass a random pointer to devm_kstrdup().
The crash I am getting looks like this:
BUG: unable to handle page fault for address: 00007f033c669379
PF: supervisor read access in kernel mode
PF: error_code(0x0001) - permissions violation
PGD 8000000101341067 P4D 8000000101341067 PUD 101340067 PMD 1013bb067 PTE 800000010aee9025
Oops: Oops: 0001 [#1] SMP PTI
CPU: 4 UID: 0 PID: 827 Comm: (udev-worker) Not tainted 6.11.8-gentoo #1
Hardware name: Apple Inc. MacBookPro14,3/Mac-551B86E5744E2388, BIOS 529.140.2.0.0 06/23/2024
RIP: 0010:strlen+0x4/0x30
Code: f7 75 ec 31 c0 c3 cc cc cc cc 48 89 f8 c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 14 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 cc
RSP: 0018:ffffb4aac0683ad8 EFLAGS: 00010202
RAX: 00000000ffffffea RBX: 00007f033c669379 RCX: 0000000000000001
RDX: 0000000000000cc0 RSI: 00007f033c669379 RDI: 00007f033c669379
RBP: 00000000ffffffea R08: 0000000000000000 R09: 00000000c0ba916a
R10: ffffffffffffffff R11: ffffffffb61ea260 R12: ffff91f7815b50c8
R13: 0000000000000cc0 R14: ffff91fafefffe30 R15: ffffb4aac0683b30
FS: 00007f033ccbe8c0(0000) GS:ffff91faeed00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f033c669379 CR3: 0000000107b1e004 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x149/0x4c0
? raw_spin_rq_lock_nested+0xe/0x20
? sched_balance_newidle+0x22b/0x3c0
? update_load_avg+0x78/0x770
? exc_page_fault+0x6f/0x150
? asm_exc_page_fault+0x26/0x30
? __pfx_pci_conf1_write+0x10/0x10
? strlen+0x4/0x30
devm_kstrdup+0x25/0x70
brcmf_of_probe+0x273/0x350 [brcmfmac] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
On removal of the device or unloading of the kernel module a potential NULL
pointer dereference occurs.
The following sequence deletes the interface:
brcmf_detach()
brcmf_remove_interface()
brcmf_del_if()
Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to
BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches.
After brcmf_remove_interface() call the brcmf_proto_detach() function is
called providing the following sequence:
brcmf_detach()
brcmf_proto_detach()
brcmf_proto_msgbuf_detach()
brcmf_flowring_detach()
brcmf_msgbuf_delete_flowring()
brcmf_msgbuf_remove_flowring()
brcmf_flowring_delete()
brcmf_get_ifp()
brcmf_txfinalize()
Since brcmf_get_ip() can and actually will return NULL in this case the
call to brcmf_txfinalize() will result in a NULL pointer dereference inside
brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors.
This will only happen if a flowring still has an skb.
Although the NULL pointer dereference has only been seen when trying to
update the tx statistic, all other uses of the ifp pointer have been
guarded as well with an early return if ifp is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: Ensure shadow stack is active before "getting" registers
The x86 shadow stack support has its own set of registers. Those registers
are XSAVE-managed, but they are "supervisor state components" which means
that userspace can not touch them with XSAVE/XRSTOR. It also means that
they are not accessible from the existing ptrace ABI for XSAVE state.
Thus, there is a new ptrace get/set interface for it.
The regset code that ptrace uses provides an ->active() handler in
addition to the get/set ones. For shadow stack this ->active() handler
verifies that shadow stack is enabled via the ARCH_SHSTK_SHSTK bit in the
thread struct. The ->active() handler is checked from some call sites of
the regset get/set handlers, but not the ptrace ones. This was not
understood when shadow stack support was put in place.
As a result, both the set/get handlers can be called with
XFEATURE_CET_USER in its init state, which would cause get_xsave_addr() to
return NULL and trigger a WARN_ON(). The ssp_set() handler luckily has an
ssp_active() check to avoid surprising the kernel with shadow stack
behavior when the kernel is not ready for it (ARCH_SHSTK_SHSTK==0). That
check just happened to avoid the warning.
But the ->get() side wasn't so lucky. It can be called with shadow stacks
disabled, triggering the warning in practice, as reported by Christina
Schimpe:
WARNING: CPU: 5 PID: 1773 at arch/x86/kernel/fpu/regset.c:198 ssp_get+0x89/0xa0
[...]
Call Trace:
<TASK>
? show_regs+0x6e/0x80
? ssp_get+0x89/0xa0
? __warn+0x91/0x150
? ssp_get+0x89/0xa0
? report_bug+0x19d/0x1b0
? handle_bug+0x46/0x80
? exc_invalid_op+0x1d/0x80
? asm_exc_invalid_op+0x1f/0x30
? __pfx_ssp_get+0x10/0x10
? ssp_get+0x89/0xa0
? ssp_get+0x52/0xa0
__regset_get+0xad/0xf0
copy_regset_to_user+0x52/0xc0
ptrace_regset+0x119/0x140
ptrace_request+0x13c/0x850
? wait_task_inactive+0x142/0x1d0
? do_syscall_64+0x6d/0x90
arch_ptrace+0x102/0x300
[...]
Ensure that shadow stacks are active in a thread before looking them up
in the XSAVE buffer. Since ARCH_SHSTK_SHSTK and user_ssp[SHSTK_EN] are
set at the same time, the active check ensures that there will be
something to find in the XSAVE buffer.
[ dhansen: changelog/subject tweaks ] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: hisi_sas: Create all dump files during debugfs initialization
For the current debugfs of hisi_sas, after user triggers dump, the
driver allocate memory space to save the register information and create
debugfs files to display the saved information. In this process, the
debugfs files created after each dump.
Therefore, when the dump is triggered while the driver is unbind, the
following hang occurs:
[67840.853907] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0
[67840.862947] Mem abort info:
[67840.865855] ESR = 0x0000000096000004
[67840.869713] EC = 0x25: DABT (current EL), IL = 32 bits
[67840.875125] SET = 0, FnV = 0
[67840.878291] EA = 0, S1PTW = 0
[67840.881545] FSC = 0x04: level 0 translation fault
[67840.886528] Data abort info:
[67840.889524] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[67840.895117] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[67840.900284] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[67840.905709] user pgtable: 4k pages, 48-bit VAs, pgdp=0000002803a1f000
[67840.912263] [00000000000000a0] pgd=0000000000000000, p4d=0000000000000000
[67840.919177] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[67840.996435] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[67841.003628] pc : down_write+0x30/0x98
[67841.007546] lr : start_creating.part.0+0x60/0x198
[67841.012495] sp : ffff8000b979ba20
[67841.016046] x29: ffff8000b979ba20 x28: 0000000000000010 x27: 0000000000024b40
[67841.023412] x26: 0000000000000012 x25: ffff20202b355ae8 x24: ffff20202b35a8c8
[67841.030779] x23: ffffa36877928208 x22: ffffa368b4972240 x21: ffff8000b979bb18
[67841.038147] x20: ffff00281dc1e3c0 x19: fffffffffffffffe x18: 0000000000000020
[67841.045515] x17: 0000000000000000 x16: ffffa368b128a530 x15: ffffffffffffffff
[67841.052888] x14: ffff8000b979bc18 x13: ffffffffffffffff x12: ffff8000b979bb18
[67841.060263] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa368b1289b18
[67841.067640] x8 : 0000000000000012 x7 : 0000000000000000 x6 : 00000000000003a9
[67841.075014] x5 : 0000000000000000 x4 : ffff002818c5cb00 x3 : 0000000000000001
[67841.082388] x2 : 0000000000000000 x1 : ffff002818c5cb00 x0 : 00000000000000a0
[67841.089759] Call trace:
[67841.092456] down_write+0x30/0x98
[67841.096017] start_creating.part.0+0x60/0x198
[67841.100613] debugfs_create_dir+0x48/0x1f8
[67841.104950] debugfs_create_files_v3_hw+0x88/0x348 [hisi_sas_v3_hw]
[67841.111447] debugfs_snapshot_regs_v3_hw+0x708/0x798 [hisi_sas_v3_hw]
[67841.118111] debugfs_trigger_dump_v3_hw_write+0x9c/0x120 [hisi_sas_v3_hw]
[67841.125115] full_proxy_write+0x68/0xc8
[67841.129175] vfs_write+0xd8/0x3f0
[67841.132708] ksys_write+0x70/0x108
[67841.136317] __arm64_sys_write+0x24/0x38
[67841.140440] invoke_syscall+0x50/0x128
[67841.144385] el0_svc_common.constprop.0+0xc8/0xf0
[67841.149273] do_el0_svc+0x24/0x38
[67841.152773] el0_svc+0x38/0xd8
[67841.156009] el0t_64_sync_handler+0xc0/0xc8
[67841.160361] el0t_64_sync+0x1a4/0x1a8
[67841.164189] Code: b9000882 d2800002 d2800023 f9800011 (c85ffc05)
[67841.170443] ---[ end trace 0000000000000000 ]---
To fix this issue, create all directories and files during debugfs
initialization. In this way, the driver only needs to allocate memory
space to save information each time the user triggers dumping. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tun: fix tun_napi_alloc_frags()
syzbot reported the following crash [1]
Issue came with the blamed commit. Instead of going through
all the iov components, we keep using the first one
and end up with a malformed skb.
[1]
kernel BUG at net/core/skbuff.c:2849 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 UID: 0 PID: 6230 Comm: syz-executor132 Not tainted 6.13.0-rc1-syzkaller-00407-g96b6fcc0ee41 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024
RIP: 0010:__pskb_pull_tail+0x1568/0x1570 net/core/skbuff.c:2848
Code: 38 c1 0f 8c 32 f1 ff ff 4c 89 f7 e8 92 96 74 f8 e9 25 f1 ff ff e8 e8 ae 09 f8 48 8b 5c 24 08 e9 eb fb ff ff e8 d9 ae 09 f8 90 <0f> 0b 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffc90004cbef30 EFLAGS: 00010293
RAX: ffffffff8995c347 RBX: 00000000fffffff2 RCX: ffff88802cf45a00
RDX: 0000000000000000 RSI: 00000000fffffff2 RDI: 0000000000000000
RBP: ffff88807df0c06a R08: ffffffff8995b084 R09: 1ffff1100fbe185c
R10: dffffc0000000000 R11: ffffed100fbe185d R12: ffff888076e85d50
R13: ffff888076e85c80 R14: ffff888076e85cf4 R15: ffff888076e85c80
FS: 00007f0dca6ea6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0dca6ead58 CR3: 00000000119da000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
skb_cow_data+0x2da/0xcb0 net/core/skbuff.c:5284
tipc_aead_decrypt net/tipc/crypto.c:894 [inline]
tipc_crypto_rcv+0x402/0x24e0 net/tipc/crypto.c:1844
tipc_rcv+0x57e/0x12a0 net/tipc/node.c:2109
tipc_l2_rcv_msg+0x2bd/0x450 net/tipc/bearer.c:668
__netif_receive_skb_list_ptype net/core/dev.c:5720 [inline]
__netif_receive_skb_list_core+0x8b7/0x980 net/core/dev.c:5762
__netif_receive_skb_list net/core/dev.c:5814 [inline]
netif_receive_skb_list_internal+0xa51/0xe30 net/core/dev.c:5905
gro_normal_list include/net/gro.h:515 [inline]
napi_complete_done+0x2b5/0x870 net/core/dev.c:6256
napi_complete include/linux/netdevice.h:567 [inline]
tun_get_user+0x2ea0/0x4890 drivers/net/tun.c:1982
tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2057
do_iter_readv_writev+0x600/0x880
vfs_writev+0x376/0xba0 fs/read_write.c:1050
do_writev+0x1b6/0x360 fs/read_write.c:1096
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Don't call cleanup on profile rollback failure
When profile rollback fails in mlx5e_netdev_change_profile, the netdev
profile var is left set to NULL. Avoid a crash when unloading the driver
by not calling profile->cleanup in such a case.
This was encountered while testing, with the original trigger that
the wq rescuer thread creation got interrupted (presumably due to
Ctrl+C-ing modprobe), which gets converted to ENOMEM (-12) by
mlx5e_priv_init, the profile rollback also fails for the same reason
(signal still active) so the profile is left as NULL, leading to a crash
later in _mlx5e_remove.
[ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2)
[ 734.525513] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
[ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12
[ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12
[ 734.560153] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
[ 734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12
[ 734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
[ 745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 745.538222] #PF: supervisor read access in kernel mode
<snipped>
[ 745.551290] Call Trace:
[ 745.551590] <TASK>
[ 745.551866] ? __die+0x20/0x60
[ 745.552218] ? page_fault_oops+0x150/0x400
[ 745.555307] ? exc_page_fault+0x79/0x240
[ 745.555729] ? asm_exc_page_fault+0x22/0x30
[ 745.556166] ? mlx5e_remove+0x6b/0xb0 [mlx5_core]
[ 745.556698] auxiliary_bus_remove+0x18/0x30
[ 745.557134] device_release_driver_internal+0x1df/0x240
[ 745.557654] bus_remove_device+0xd7/0x140
[ 745.558075] device_del+0x15b/0x3c0
[ 745.558456] mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core]
[ 745.559112] mlx5_unregister_device+0x34/0x50 [mlx5_core]
[ 745.559686] mlx5_uninit_one+0x46/0xf0 [mlx5_core]
[ 745.560203] remove_one+0x4e/0xd0 [mlx5_core]
[ 745.560694] pci_device_remove+0x39/0xa0
[ 745.561112] device_release_driver_internal+0x1df/0x240
[ 745.561631] driver_detach+0x47/0x90
[ 745.562022] bus_remove_driver+0x84/0x100
[ 745.562444] pci_unregister_driver+0x3b/0x90
[ 745.562890] mlx5_cleanup+0xc/0x1b [mlx5_core]
[ 745.563415] __x64_sys_delete_module+0x14d/0x2f0
[ 745.563886] ? kmem_cache_free+0x1b0/0x460
[ 745.564313] ? lockdep_hardirqs_on_prepare+0xe2/0x190
[ 745.564825] do_syscall_64+0x6d/0x140
[ 745.565223] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 745.565725] RIP: 0033:0x7f1579b1288b |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: fix potential null-ptr-deref in device_add()
I got the following null-ptr-deref report while doing fault injection test:
BUG: kernel NULL pointer dereference, address: 0000000000000058
CPU: 2 PID: 278 Comm: 37-i2c-ds2482 Tainted: G B W N 6.1.0-rc3+
RIP: 0010:klist_put+0x2d/0xd0
Call Trace:
<TASK>
klist_remove+0xf1/0x1c0
device_release_driver_internal+0x196/0x210
bus_remove_device+0x1bd/0x240
device_add+0xd3d/0x1100
w1_add_master_device+0x476/0x490 [wire]
ds2482_probe+0x303/0x3e0 [ds2482]
This is how it happened:
w1_alloc_dev()
// The dev->driver is set to w1_master_driver.
memcpy(&dev->dev, device, sizeof(struct device));
device_add()
bus_add_device()
dpm_sysfs_add() // It fails, calls bus_remove_device.
// error path
bus_remove_device()
// The dev->driver is not null, but driver is not bound.
__device_release_driver()
klist_remove(&dev->p->knode_driver) <-- It causes null-ptr-deref.
// normal path
bus_probe_device() // It's not called yet.
device_bind_driver()
If dev->driver is set, in the error path after calling bus_add_device()
in device_add(), bus_remove_device() is called, then the device will be
detached from driver. But device_bind_driver() is not called yet, so it
causes null-ptr-deref while access the 'knode_driver'. To fix this, set
dev->driver to null in the error path before calling bus_remove_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix system suspend without fbdev being initialized
If fbdev is not initialized for some reason - in practice on platforms
without display - suspending fbdev should be skipped during system
suspend, fix this up. While at it add an assert that suspending fbdev
only happens with the display present.
This fixes the following:
[ 91.227923] PM: suspend entry (s2idle)
[ 91.254598] Filesystems sync: 0.025 seconds
[ 91.270518] Freezing user space processes
[ 91.272266] Freezing user space processes completed (elapsed 0.001 seconds)
[ 91.272686] OOM killer disabled.
[ 91.272872] Freezing remaining freezable tasks
[ 91.274295] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 91.659622] BUG: kernel NULL pointer dereference, address: 00000000000001c8
[ 91.659981] #PF: supervisor write access in kernel mode
[ 91.660252] #PF: error_code(0x0002) - not-present page
[ 91.660511] PGD 0 P4D 0
[ 91.660647] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 91.660875] CPU: 4 PID: 917 Comm: bash Not tainted 6.2.0-rc7+ #54
[ 91.661185] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20221117gitfff6d81270b5-9.fc37 unknown
[ 91.661680] RIP: 0010:mutex_lock+0x19/0x30
[ 91.661914] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 53 48 89 fb e8 62 d3 ff ff 31 c0 65 48 8b 14 25 00 15 03 00 <f0> 48 0f b1 13 75 06 5b c3 cc cc cc cc 48 89 df 5b eb b4 0f 1f 40
[ 91.662840] RSP: 0018:ffffa1e8011ffc08 EFLAGS: 00010246
[ 91.663087] RAX: 0000000000000000 RBX: 00000000000001c8 RCX: 0000000000000000
[ 91.663440] RDX: ffff8be455eb0000 RSI: 0000000000000001 RDI: 00000000000001c8
[ 91.663802] RBP: ffff8be459440000 R08: ffff8be459441f08 R09: ffffffff8e1432c0
[ 91.664167] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
[ 91.664532] R13: 00000000000001c8 R14: 0000000000000000 R15: ffff8be442f4fb20
[ 91.664905] FS: 00007f28ffc16740(0000) GS:ffff8be4bb900000(0000) knlGS:0000000000000000
[ 91.665334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 91.665626] CR2: 00000000000001c8 CR3: 0000000114926006 CR4: 0000000000770ee0
[ 91.665988] PKRU: 55555554
[ 91.666131] Call Trace:
[ 91.666265] <TASK>
[ 91.666381] intel_fbdev_set_suspend+0x97/0x1b0 [i915]
[ 91.666738] i915_drm_suspend+0xb9/0x100 [i915]
[ 91.667029] pci_pm_suspend+0x78/0x170
[ 91.667234] ? __pfx_pci_pm_suspend+0x10/0x10
[ 91.667461] dpm_run_callback+0x47/0x150
[ 91.667673] __device_suspend+0x10a/0x4e0
[ 91.667880] dpm_suspend+0x134/0x270
[ 91.668069] dpm_suspend_start+0x79/0x80
[ 91.668272] suspend_devices_and_enter+0x11b/0x890
[ 91.668526] pm_suspend.cold+0x270/0x2fc
[ 91.668737] state_store+0x46/0x90
[ 91.668916] kernfs_fop_write_iter+0x11b/0x200
[ 91.669153] vfs_write+0x1e1/0x3a0
[ 91.669336] ksys_write+0x53/0xd0
[ 91.669510] do_syscall_64+0x58/0xc0
[ 91.669699] ? syscall_exit_to_user_mode_prepare+0x18e/0x1c0
[ 91.669980] ? syscall_exit_to_user_mode_prepare+0x18e/0x1c0
[ 91.670278] ? syscall_exit_to_user_mode+0x17/0x40
[ 91.670524] ? do_syscall_64+0x67/0xc0
[ 91.670717] ? __irq_exit_rcu+0x3d/0x140
[ 91.670931] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 91.671202] RIP: 0033:0x7f28ffd14284
v2: CC stable. (Jani)
References: https://gitlab.freedesktop.org/drm/intel/-/issues/8015
(cherry picked from commit 9542d708409a41449e99c9a464deb5e062c4bee2) |
| In the Linux kernel, the following vulnerability has been resolved:
net: cdc_ncm: Deal with too low values of dwNtbOutMaxSize
Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than
the calculated "min" value, but greater than zero, the logic sets
tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in
cdc_ncm_fill_tx_frame() where all the data is handled.
For small values of dwNtbOutMaxSize the memory allocated during
alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to
how size is aligned at alloc time:
size = SKB_DATA_ALIGN(size);
size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
Thus we hit the same bug that we tried to squash with
commit 2be6d4d16a084 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero")
Low values of dwNtbOutMaxSize do not cause an issue presently because at
alloc_skb() time more memory (512b) is allocated than required for the
SKB headers alone (320b), leaving some space (512b - 320b = 192b)
for CDC data (172b).
However, if more elements (for example 3 x u64 = [24b]) were added to
one of the SKB header structs, say 'struct skb_shared_info',
increasing its original size (320b [320b aligned]) to something larger
(344b [384b aligned]), then suddenly the CDC data (172b) no longer
fits in the spare SKB data area (512b - 384b = 128b).
Consequently the SKB bounds checking semantics fails and panics:
skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:113!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023
Workqueue: mld mld_ifc_work
RIP: 0010:skb_panic net/core/skbuff.c:113 [inline]
RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118
[snip]
Call Trace:
<TASK>
skb_put+0x151/0x210 net/core/skbuff.c:2047
skb_put_zero include/linux/skbuff.h:2422 [inline]
cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline]
cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308
cdc_ncm_tx_fixup+0xa3/0x100
Deal with too low values of dwNtbOutMaxSize, clamp it in the range
[USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure
enough data space is allocated to handle CDC data by making sure
dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ac97: Fix possible NULL dereference in snd_ac97_mixer
smatch error:
sound/pci/ac97/ac97_codec.c:2354 snd_ac97_mixer() error:
we previously assumed 'rac97' could be null (see line 2072)
remove redundant assignment, return error if rac97 is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gvt: fix vgpu debugfs clean in remove
Check carefully on root debugfs available when destroying vgpu,
e.g in remove case drm minor's debugfs root might already be destroyed,
which led to kernel oops like below.
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: MDEV: Unregistering
intel_vgpu_mdev b1338b2d-a709-4c23-b766-cc436c36cdf0: Removing from iommu group 14
BUG: kernel NULL pointer dereference, address: 0000000000000150
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 3 PID: 1046 Comm: driverctl Not tainted 6.1.0-rc2+ #6
Hardware name: HP HP ProDesk 600 G3 MT/829D, BIOS P02 Ver. 02.44 09/13/2022
RIP: 0010:__lock_acquire+0x5e2/0x1f90
Code: 87 ad 09 00 00 39 05 e1 1e cc 02 0f 82 f1 09 00 00 ba 01 00 00 00 48 83 c4 48 89 d0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 45 31 ff <48> 81 3f 60 9e c2 b6 45 0f 45 f8 83 fe 01 0f 87 55 fa ff ff 89 f0
RSP: 0018:ffff9f770274f948 EFLAGS: 00010046
RAX: 0000000000000003 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000150
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8895d1173300 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000150 R14: 0000000000000000 R15: 0000000000000000
FS: 00007fc9b2ba0740(0000) GS:ffff889cdfcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000150 CR3: 000000010fd93005 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
lock_acquire+0xbf/0x2b0
? simple_recursive_removal+0xa5/0x2b0
? lock_release+0x13d/0x2d0
down_write+0x2a/0xd0
? simple_recursive_removal+0xa5/0x2b0
simple_recursive_removal+0xa5/0x2b0
? start_creating.part.0+0x110/0x110
? _raw_spin_unlock+0x29/0x40
debugfs_remove+0x40/0x60
intel_gvt_debugfs_remove_vgpu+0x15/0x30 [kvmgt]
intel_gvt_destroy_vgpu+0x60/0x100 [kvmgt]
intel_vgpu_release_dev+0xe/0x20 [kvmgt]
device_release+0x30/0x80
kobject_put+0x79/0x1b0
device_release_driver_internal+0x1b8/0x230
bus_remove_device+0xec/0x160
device_del+0x189/0x400
? up_write+0x9c/0x1b0
? mdev_device_remove_common+0x60/0x60 [mdev]
mdev_device_remove_common+0x22/0x60 [mdev]
mdev_device_remove_cb+0x17/0x20 [mdev]
device_for_each_child+0x56/0x80
mdev_unregister_parent+0x5a/0x81 [mdev]
intel_gvt_clean_device+0x2d/0xe0 [kvmgt]
intel_gvt_driver_remove+0x2e/0xb0 [i915]
i915_driver_remove+0xac/0x100 [i915]
i915_pci_remove+0x1a/0x30 [i915]
pci_device_remove+0x31/0xa0
device_release_driver_internal+0x1b8/0x230
unbind_store+0xd8/0x100
kernfs_fop_write_iter+0x156/0x210
vfs_write+0x236/0x4a0
ksys_write+0x61/0xd0
do_syscall_64+0x55/0x80
? find_held_lock+0x2b/0x80
? lock_release+0x13d/0x2d0
? up_read+0x17/0x20
? lock_is_held_type+0xe3/0x140
? asm_exc_page_fault+0x22/0x30
? lockdep_hardirqs_on+0x7d/0x100
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fc9b2c9e0c4
Code: 15 71 7d 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 80 3d 3d 05 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48
RSP: 002b:00007ffec29c81c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fc9b2c9e0c4
RDX: 000000000000000d RSI: 0000559f8b5f48a0 RDI: 0000000000000001
RBP: 0000559f8b5f48a0 R08: 0000559f8b5f3540 R09: 00007fc9b2d76d30
R10: 0000000000000000 R11: 0000000000000202 R12: 000000000000000d
R13: 00007fc9b2d77780 R14: 000000000000000d R15: 00007fc9b2d72a00
</TASK>
Modules linked in: sunrpc intel_rapl_msr intel_rapl_common intel_pmc_core_pltdrv intel_pmc_core intel_tcc_cooling x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ee1004 igbvf rapl vfat fat intel_cstate intel_uncore pktcdvd i2c_i801 pcspkr wmi_bmof i2c_smbus acpi_pad vfio_pci vfio_pci_core vfio_virqfd zram fuse dm
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (coretemp) Simplify platform device handling
Coretemp's platform driver is unconventional. All the real work is done
globally by the initcall and CPU hotplug notifiers, while the "driver"
effectively just wraps an allocation and the registration of the hwmon
interface in a long-winded round-trip through the driver core. The whole
logic of dynamically creating and destroying platform devices to bring
the interfaces up and down is error prone, since it assumes
platform_device_add() will synchronously bind the driver and set drvdata
before it returns, thus results in a NULL dereference if drivers_autoprobe
is turned off for the platform bus. Furthermore, the unusual approach of
doing that from within a CPU hotplug notifier, already commented in the
code that it deadlocks suspend, also causes lockdep issues for other
drivers or subsystems which may want to legitimately register a CPU
hotplug notifier from a platform bus notifier.
All of these issues can be solved by ripping this unusual behaviour out
completely, simply tying the platform devices to the lifetime of the
module itself, and directly managing the hwmon interfaces from the
hotplug notifiers. There is a slight user-visible change in that
/sys/bus/platform/drivers/coretemp will no longer appear, and
/sys/devices/platform/coretemp.n will remain present if package n is
hotplugged off, but hwmon users should really only be looking for the
presence of the hwmon interfaces, whose behaviour remains unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Avoid fcport pointer dereference
Klocwork reported warning of NULL pointer may be dereferenced. The routine
exits when sa_ctl is NULL and fcport is allocated after the exit call thus
causing NULL fcport pointer to dereference at the time of exit.
To avoid fcport pointer dereference, exit the routine when sa_ctl is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: ensure CLM version is null-terminated to prevent stack-out-of-bounds
Fix a stack-out-of-bounds read in brcmfmac that occurs
when 'buf' that is not null-terminated is passed as an argument of
strreplace() in brcmf_c_preinit_dcmds(). This buffer is filled with
a CLM version string by memcpy() in brcmf_fil_iovar_data_get().
Ensure buf is null-terminated.
Found by a modified version of syzkaller.
[ 33.004414][ T1896] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 33.013486][ T1896] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43236/3 wl0: Nov 30 2011 17:33:42 version 5.90.188.22
[ 33.021554][ T1896] ==================================================================
[ 33.022379][ T1896] BUG: KASAN: stack-out-of-bounds in strreplace+0xf2/0x110
[ 33.023122][ T1896] Read of size 1 at addr ffffc90001d6efc8 by task kworker/0:2/1896
[ 33.023852][ T1896]
[ 33.024096][ T1896] CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132
[ 33.024927][ T1896] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 33.026065][ T1896] Workqueue: usb_hub_wq hub_event
[ 33.026581][ T1896] Call Trace:
[ 33.026896][ T1896] dump_stack_lvl+0x57/0x7d
[ 33.027372][ T1896] print_address_description.constprop.0.cold+0xf/0x334
[ 33.028037][ T1896] ? strreplace+0xf2/0x110
[ 33.028403][ T1896] ? strreplace+0xf2/0x110
[ 33.028807][ T1896] kasan_report.cold+0x83/0xdf
[ 33.029283][ T1896] ? strreplace+0xf2/0x110
[ 33.029666][ T1896] strreplace+0xf2/0x110
[ 33.029966][ T1896] brcmf_c_preinit_dcmds+0xab1/0xc40
[ 33.030351][ T1896] ? brcmf_c_set_joinpref_default+0x100/0x100
[ 33.030787][ T1896] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 33.031223][ T1896] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 33.031661][ T1896] ? lock_acquire+0x19d/0x4e0
[ 33.032091][ T1896] ? find_held_lock+0x2d/0x110
[ 33.032605][ T1896] ? brcmf_usb_deq+0x1a7/0x260
[ 33.033087][ T1896] ? brcmf_usb_rx_fill_all+0x5a/0xf0
[ 33.033582][ T1896] brcmf_attach+0x246/0xd40
[ 33.034022][ T1896] ? wiphy_new_nm+0x1476/0x1d50
[ 33.034383][ T1896] ? kmemdup+0x30/0x40
[ 33.034722][ T1896] brcmf_usb_probe+0x12de/0x1690
[ 33.035223][ T1896] ? brcmf_usbdev_qinit.constprop.0+0x470/0x470
[ 33.035833][ T1896] usb_probe_interface+0x25f/0x710
[ 33.036315][ T1896] really_probe+0x1be/0xa90
[ 33.036656][ T1896] __driver_probe_device+0x2ab/0x460
[ 33.037026][ T1896] ? usb_match_id.part.0+0x88/0xc0
[ 33.037383][ T1896] driver_probe_device+0x49/0x120
[ 33.037790][ T1896] __device_attach_driver+0x18a/0x250
[ 33.038300][ T1896] ? driver_allows_async_probing+0x120/0x120
[ 33.038986][ T1896] bus_for_each_drv+0x123/0x1a0
[ 33.039906][ T1896] ? bus_rescan_devices+0x20/0x20
[ 33.041412][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 33.041861][ T1896] ? trace_hardirqs_on+0x1c/0x120
[ 33.042330][ T1896] __device_attach+0x207/0x330
[ 33.042664][ T1896] ? device_bind_driver+0xb0/0xb0
[ 33.043026][ T1896] ? kobject_uevent_env+0x230/0x12c0
[ 33.043515][ T1896] bus_probe_device+0x1a2/0x260
[ 33.043914][ T1896] device_add+0xa61/0x1ce0
[ 33.044227][ T1896] ? __mutex_unlock_slowpath+0xe7/0x660
[ 33.044891][ T1896] ? __fw_devlink_link_to_suppliers+0x550/0x550
[ 33.045531][ T1896] usb_set_configuration+0x984/0x1770
[ 33.046051][ T1896] ? kernfs_create_link+0x175/0x230
[ 33.046548][ T1896] usb_generic_driver_probe+0x69/0x90
[ 33.046931][ T1896] usb_probe_device+0x9c/0x220
[ 33.047434][ T1896] really_probe+0x1be/0xa90
[ 33.047760][ T1896] __driver_probe_device+0x2ab/0x460
[ 33.048134][ T1896] driver_probe_device+0x49/0x120
[ 33.048516][ T1896] __device_attach_driver+0x18a/0x250
[ 33.048910][ T1896] ? driver_allows_async_probing+0x120/0x120
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: Always check queue mode setting from configfs
Make sure to check device queue mode in the null_validate_conf() and
return error for NULL_Q_RQ as we don't allow legacy I/O path, without
this patch we get OOPs when queue mode is set to 1 from configfs,
following are repro steps :-
modprobe null_blk nr_devices=0
mkdir config/nullb/nullb0
echo 1 > config/nullb/nullb0/memory_backed
echo 4096 > config/nullb/nullb0/blocksize
echo 20480 > config/nullb/nullb0/size
echo 1 > config/nullb/nullb0/queue_mode
echo 1 > config/nullb/nullb0/power
Entering kdb (current=0xffff88810acdd080, pid 2372) on processor 42 Oops: (null)
due to oops @ 0xffffffffc041c329
CPU: 42 PID: 2372 Comm: sh Tainted: G O N 6.3.0-rc5lblk+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
RIP: 0010:null_add_dev.part.0+0xd9/0x720 [null_blk]
Code: 01 00 00 85 d2 0f 85 a1 03 00 00 48 83 bb 08 01 00 00 00 0f 85 f7 03 00 00 80 bb 62 01 00 00 00 48 8b 75 20 0f 85 6d 02 00 00 <48> 89 6e 60 48 8b 75 20 bf 06 00 00 00 e8 f5 37 2c c1 48 8b 75 20
RSP: 0018:ffffc900052cbde0 EFLAGS: 00010246
RAX: 0000000000000001 RBX: ffff88811084d800 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888100042e00
RBP: ffff8881053d8200 R08: ffffc900052cbd68 R09: ffff888105db2000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000002
R13: ffff888104765200 R14: ffff88810eec1748 R15: ffff88810eec1740
FS: 00007fd445fd1740(0000) GS:ffff8897dfc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000060 CR3: 0000000166a00000 CR4: 0000000000350ee0
DR0: ffffffff8437a488 DR1: ffffffff8437a489 DR2: ffffffff8437a48a
DR3: ffffffff8437a48b DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
nullb_device_power_store+0xd1/0x120 [null_blk]
configfs_write_iter+0xb4/0x120
vfs_write+0x2ba/0x3c0
ksys_write+0x5f/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fd4460c57a7
Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007ffd3792a4a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fd4460c57a7
RDX: 0000000000000002 RSI: 000055b43c02e4c0 RDI: 0000000000000001
RBP: 000055b43c02e4c0 R08: 000000000000000a R09: 00007fd44615b4e0
R10: 00007fd44615b3e0 R11: 0000000000000246 R12: 0000000000000002
R13: 00007fd446198520 R14: 0000000000000002 R15: 00007fd446198700
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: iosm: fix NULL pointer dereference when removing device
In suspend and resume cycle, the removal and rescan of device ends
up in NULL pointer dereference.
During driver initialization, if the ipc_imem_wwan_channel_init()
fails to get the valid device capabilities it returns an error and
further no resource (wwan struct) will be allocated. Now in this
situation if driver removal procedure is initiated it would result
in NULL pointer exception since unallocated wwan struct is dereferenced
inside ipc_wwan_deinit().
ipc_imem_run_state_worker() to handle the called functions return value
and to release the resource in failure case. It also reports the link
down event in failure cases. The user space application can handle this
event to do a device reset for restoring the device communication. |
| In the Linux kernel, the following vulnerability has been resolved:
can: gs_usb: fix time stamp counter initialization
If the gs_usb device driver is unloaded (or unbound) before the
interface is shut down, the USB stack first calls the struct
usb_driver::disconnect and then the struct net_device_ops::ndo_stop
callback.
In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more
RX'ed CAN frames are send from the USB device to the host. Later in
gs_can_close() a reset control message is send to each CAN channel to
remove the controller from the CAN bus. In this race window the USB
device can still receive CAN frames from the bus and internally queue
them to be send to the host.
At least in the current version of the candlelight firmware, the queue
of received CAN frames is not emptied during the reset command. After
loading (or binding) the gs_usb driver, new URBs are submitted during
the struct net_device_ops::ndo_open callback and the candlelight
firmware starts sending its already queued CAN frames to the host.
However, this scenario was not considered when implementing the
hardware timestamp function. The cycle counter/time counter
infrastructure is set up (gs_usb_timestamp_init()) after the USBs are
submitted, resulting in a NULL pointer dereference if
timecounter_cyc2time() (via the call chain:
gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() ->
gs_usb_skb_set_timestamp()) is called too early.
Move the gs_usb_timestamp_init() function before the URBs are
submitted to fix this problem.
For a comprehensive solution, we need to consider gs_usb devices with
more than 1 channel. The cycle counter/time counter infrastructure is
setup per channel, but the RX URBs are per device. Once gs_can_open()
of _a_ channel has been called, and URBs have been submitted, the
gs_usb_receive_bulk_callback() can be called for _all_ available
channels, even for channels that are not running, yet. As cycle
counter/time counter has not set up, this will again lead to a NULL
pointer dereference.
Convert the cycle counter/time counter from a "per channel" to a "per
device" functionality. Also set it up, before submitting any URBs to
the device.
Further in gs_usb_receive_bulk_callback(), don't process any URBs for
not started CAN channels, only resubmit the URB. |
