| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: do not propagate ENODATA disk errors into xattr code
ENODATA (aka ENOATTR) has a very specific meaning in the xfs xattr code;
namely, that the requested attribute name could not be found.
However, a medium error from disk may also return ENODATA. At best,
this medium error may escape to userspace as "attribute not found"
when in fact it's an IO (disk) error.
At worst, we may oops in xfs_attr_leaf_get() when we do:
error = xfs_attr_leaf_hasname(args, &bp);
if (error == -ENOATTR) {
xfs_trans_brelse(args->trans, bp);
return error;
}
because an ENODATA/ENOATTR error from disk leaves us with a null bp,
and the xfs_trans_brelse will then null-deref it.
As discussed on the list, we really need to modify the lower level
IO functions to trap all disk errors and ensure that we don't let
unique errors like this leak up into higher xfs functions - many
like this should be remapped to EIO.
However, this patch directly addresses a reported bug in the xattr
code, and should be safe to backport to stable kernels. A larger-scope
patch to handle more unique errors at lower levels can follow later.
(Note, prior to 07120f1abdff we did not oops, but we did return the
wrong error code to userspace.) |
| In the Linux kernel, the following vulnerability has been resolved:
fs/smb: Fix inconsistent refcnt update
A possible inconsistent update of refcount was identified in `smb2_compound_op`.
Such inconsistent update could lead to possible resource leaks.
Why it is a possible bug:
1. In the comment section of the function, it clearly states that the
reference to `cfile` should be dropped after calling this function.
2. Every control flow path would check and drop the reference to
`cfile`, except the patched one.
3. Existing callers would not handle refcount update of `cfile` if
-ENOMEM is returned.
To fix the bug, an extra goto label "out" is added, to make sure that the
cleanup logic would always be respected. As the problem is caused by the
allocation failure of `vars`, the cleanup logic between label "finished"
and "out" can be safely ignored. According to the definition of function
`is_replayable_error`, the error code of "-ENOMEM" is not recoverable.
Therefore, the replay logic also gets ignored. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-ntrig: fix unable to handle page fault in ntrig_report_version()
in ntrig_report_version(), hdev parameter passed from hid_probe().
sending descriptor to /dev/uhid can make hdev->dev.parent->parent to null
if hdev->dev.parent->parent is null, usb_dev has
invalid address(0xffffffffffffff58) that hid_to_usb_dev(hdev) returned
when usb_rcvctrlpipe() use usb_dev,it trigger
page fault error for address(0xffffffffffffff58)
add null check logic to ntrig_report_version()
before calling hid_to_usb_dev() |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Duplicate SPI Handling
The issue originates when Strongswan initiates an XFRM_MSG_ALLOCSPI
Netlink message, which triggers the kernel function xfrm_alloc_spi().
This function is expected to ensure uniqueness of the Security Parameter
Index (SPI) for inbound Security Associations (SAs). However, it can
return success even when the requested SPI is already in use, leading
to duplicate SPIs assigned to multiple inbound SAs, differentiated
only by their destination addresses.
This behavior causes inconsistencies during SPI lookups for inbound packets.
Since the lookup may return an arbitrary SA among those with the same SPI,
packet processing can fail, resulting in packet drops.
According to RFC 4301 section 4.4.2 , for inbound processing a unicast SA
is uniquely identified by the SPI and optionally protocol.
Reproducing the Issue Reliably:
To consistently reproduce the problem, restrict the available SPI range in
charon.conf : spi_min = 0x10000000 spi_max = 0x10000002
This limits the system to only 2 usable SPI values.
Next, create more than 2 Child SA. each using unique pair of src/dst address.
As soon as the 3rd Child SA is initiated, it will be assigned a duplicate
SPI, since the SPI pool is already exhausted.
With a narrow SPI range, the issue is consistently reproducible.
With a broader/default range, it becomes rare and unpredictable.
Current implementation:
xfrm_spi_hash() lookup function computes hash using daddr, proto, and family.
So if two SAs have the same SPI but different destination addresses, then
they will:
a. Hash into different buckets
b. Be stored in different linked lists (byspi + h)
c. Not be seen in the same hlist_for_each_entry_rcu() iteration.
As a result, the lookup will result in NULL and kernel allows that Duplicate SPI
Proposed Change:
xfrm_state_lookup_spi_proto() does a truly global search - across all states,
regardless of hash bucket and matches SPI and proto. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: tegra: Use I/O memcpy to write to IRAM
Kasan crashes the kernel trying to check boundaries when using the
normal memcpy. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix link speed calculation on retrain failure
When pcie_failed_link_retrain() fails to retrain, it tries to revert to the
previous link speed. However it calculates that speed from the Link
Control 2 register without masking out non-speed bits first.
PCIE_LNKCTL2_TLS2SPEED() converts such incorrect values to
PCI_SPEED_UNKNOWN (0xff), which in turn causes a WARN splat in
pcie_set_target_speed():
pci 0000:00:01.1: [1022:14ed] type 01 class 0x060400 PCIe Root Port
pci 0000:00:01.1: broken device, retraining non-functional downstream link at 2.5GT/s
pci 0000:00:01.1: retraining failed
WARNING: CPU: 1 PID: 1 at drivers/pci/pcie/bwctrl.c:168 pcie_set_target_speed
RDX: 0000000000000001 RSI: 00000000000000ff RDI: ffff9acd82efa000
pcie_failed_link_retrain
pci_device_add
pci_scan_single_device
Mask out the non-speed bits in PCIE_LNKCTL2_TLS2SPEED() and
PCIE_LNKCAP_SLS2SPEED() so they don't incorrectly return PCI_SPEED_UNKNOWN.
[bhelgaas: commit log, add details from https://lore.kernel.org/r/1c92ef6bcb314ee6977839b46b393282e4f52e74.1750684771.git.lukas@wunner.de] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mremap: fix WARN with uffd that has remap events disabled
Registering userfaultd on a VMA that spans at least one PMD and then
mremap()'ing that VMA can trigger a WARN when recovering from a failed
page table move due to a page table allocation error.
The code ends up doing the right thing (recurse, avoiding moving actual
page tables), but triggering that WARN is unpleasant:
WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_normal_pmd mm/mremap.c:357 [inline]
WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_pgt_entry mm/mremap.c:595 [inline]
WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_page_tables+0x3832/0x44a0 mm/mremap.c:852
Modules linked in:
CPU: 2 UID: 0 PID: 6133 Comm: syz.0.19 Not tainted 6.17.0-rc1-syzkaller-00004-g53e760d89498 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:move_normal_pmd mm/mremap.c:357 [inline]
RIP: 0010:move_pgt_entry mm/mremap.c:595 [inline]
RIP: 0010:move_page_tables+0x3832/0x44a0 mm/mremap.c:852
Code: ...
RSP: 0018:ffffc900037a76d8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000032930007 RCX: ffffffff820c6645
RDX: ffff88802e56a440 RSI: ffffffff820c7201 RDI: 0000000000000007
RBP: ffff888037728fc0 R08: 0000000000000007 R09: 0000000000000000
R10: 0000000032930007 R11: 0000000000000000 R12: 0000000000000000
R13: ffffc900037a79a8 R14: 0000000000000001 R15: dffffc0000000000
FS: 000055556316a500(0000) GS:ffff8880d68bc000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b30863fff CR3: 0000000050171000 CR4: 0000000000352ef0
Call Trace:
<TASK>
copy_vma_and_data+0x468/0x790 mm/mremap.c:1215
move_vma+0x548/0x1780 mm/mremap.c:1282
mremap_to+0x1b7/0x450 mm/mremap.c:1406
do_mremap+0xfad/0x1f80 mm/mremap.c:1921
__do_sys_mremap+0x119/0x170 mm/mremap.c:1977
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f00d0b8ebe9
Code: ...
RSP: 002b:00007ffe5ea5ee98 EFLAGS: 00000246 ORIG_RAX: 0000000000000019
RAX: ffffffffffffffda RBX: 00007f00d0db5fa0 RCX: 00007f00d0b8ebe9
RDX: 0000000000400000 RSI: 0000000000c00000 RDI: 0000200000000000
RBP: 00007ffe5ea5eef0 R08: 0000200000c00000 R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000002
R13: 00007f00d0db5fa0 R14: 00007f00d0db5fa0 R15: 0000000000000005
</TASK>
The underlying issue is that we recurse during the original page table
move, but not during the recovery move.
Fix it by checking for both VMAs and performing the check before the
pmd_none() sanity check.
Add a new helper where we perform+document that check for the PMD and PUD
level.
Thanks to Harry for bisecting. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered
If a synchronous error is detected as a result of user-space process
triggering a 2-bit uncorrected error, the CPU will take a synchronous
error exception such as Synchronous External Abort (SEA) on Arm64. The
kernel will queue a memory_failure() work which poisons the related
page, unmaps the page, and then sends a SIGBUS to the process, so that
a system wide panic can be avoided.
However, no memory_failure() work will be queued when abnormal
synchronous errors occur. These errors can include situations like
invalid PA, unexpected severity, no memory failure config support,
invalid GUID section, etc. In such a case, the user-space process will
trigger SEA again. This loop can potentially exceed the platform
firmware threshold or even trigger a kernel hard lockup, leading to a
system reboot.
Fix it by performing a force kill if no memory_failure() work is queued
for synchronous errors.
[ rjw: Changelog edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Set .migrate_folio in gfs2_{rgrp,meta}_aops
Clears up the warning added in 7ee3647243e5 ("migrate: Remove call to
->writepage") that occurs in various xfstests, causing "something found
in dmesg" failures.
[ 341.136573] gfs2_meta_aops does not implement migrate_folio
[ 341.136953] WARNING: CPU: 1 PID: 36 at mm/migrate.c:944 move_to_new_folio+0x2f8/0x300 |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: rockchip: fix kernel hang during smp initialization
In order to bring up secondary CPUs main CPU write trampoline
code to SRAM. The trampoline code is written while secondary
CPUs are powered on (at least that true for RK3188 CPU).
Sometimes that leads to kernel hang. Probably because secondary
CPU execute trampoline code while kernel doesn't expect.
The patch moves SRAM initialization step to the point where all
secondary CPUs are powered down.
That fixes rarely hangs on RK3188:
[ 0.091568] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.091996] rockchip_smp_prepare_cpus: ncores 4 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Forget ranges when refining tnum after JSET
Syzbot reported a kernel warning due to a range invariant violation on
the following BPF program.
0: call bpf_get_netns_cookie
1: if r0 == 0 goto <exit>
2: if r0 & Oxffffffff goto <exit>
The issue is on the path where we fall through both jumps.
That path is unreachable at runtime: after insn 1, we know r0 != 0, but
with the sign extension on the jset, we would only fallthrough insn 2
if r0 == 0. Unfortunately, is_branch_taken() isn't currently able to
figure this out, so the verifier walks all branches. The verifier then
refines the register bounds using the second condition and we end
up with inconsistent bounds on this unreachable path:
1: if r0 == 0 goto <exit>
r0: u64=[0x1, 0xffffffffffffffff] var_off=(0, 0xffffffffffffffff)
2: if r0 & 0xffffffff goto <exit>
r0 before reg_bounds_sync: u64=[0x1, 0xffffffffffffffff] var_off=(0, 0)
r0 after reg_bounds_sync: u64=[0x1, 0] var_off=(0, 0)
Improving the range refinement for JSET to cover all cases is tricky. We
also don't expect many users to rely on JSET given LLVM doesn't generate
those instructions. So instead of improving the range refinement for
JSETs, Eduard suggested we forget the ranges whenever we're narrowing
tnums after a JSET. This patch implements that approach. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: shutdown driver when hardware is unreliable
In rare cases, ath10k may lose connection with the PCIe bus due to
some unknown reasons, which could further lead to system crashes during
resuming due to watchdog timeout:
ath10k_pci 0000:01:00.0: wmi command 20486 timeout, restarting hardware
ath10k_pci 0000:01:00.0: already restarting
ath10k_pci 0000:01:00.0: failed to stop WMI vdev 0: -11
ath10k_pci 0000:01:00.0: failed to stop vdev 0: -11
ieee80211 phy0: PM: **** DPM device timeout ****
Call Trace:
panic+0x125/0x315
dpm_watchdog_set+0x54/0x54
dpm_watchdog_handler+0x57/0x57
call_timer_fn+0x31/0x13c
At this point, all WMI commands will timeout and attempt to restart
device. So set a threshold for consecutive restart failures. If the
threshold is exceeded, consider the hardware is unreliable and all
ath10k operations should be skipped to avoid system crash.
fail_cont_count and pending_recovery are atomic variables, and
do not involve complex conditional logic. Therefore, even if recovery
check and reconfig complete are executed concurrently, the recovery
mechanism will not be broken.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
rcutorture: Fix rcutorture_one_extend_check() splat in RT kernels
For built with CONFIG_PREEMPT_RT=y kernels, running rcutorture
tests resulted in the following splat:
[ 68.797425] rcutorture_one_extend_check during change: Current 0x1 To add 0x1 To remove 0x0 preempt_count() 0x0
[ 68.797533] WARNING: CPU: 2 PID: 512 at kernel/rcu/rcutorture.c:1993 rcutorture_one_extend_check+0x419/0x560 [rcutorture]
[ 68.797601] Call Trace:
[ 68.797602] <TASK>
[ 68.797619] ? lockdep_softirqs_off+0xa5/0x160
[ 68.797631] rcutorture_one_extend+0x18e/0xcc0 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c]
[ 68.797646] ? local_clock+0x19/0x40
[ 68.797659] rcu_torture_one_read+0xf0/0x280 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c]
[ 68.797678] ? __pfx_rcu_torture_one_read+0x10/0x10 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c]
[ 68.797804] ? __pfx_rcu_torture_timer+0x10/0x10 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c]
[ 68.797815] rcu-torture: rcu_torture_reader task started
[ 68.797824] rcu-torture: Creating rcu_torture_reader task
[ 68.797824] rcu_torture_reader+0x238/0x580 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c]
[ 68.797836] ? kvm_sched_clock_read+0x15/0x30
Disable BH does not change the SOFTIRQ corresponding bits in
preempt_count() for RT kernels, this commit therefore use
softirq_count() to check the if BH is disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250: fix panic due to PSLVERR
When the PSLVERR_RESP_EN parameter is set to 1, the device generates
an error response if an attempt is made to read an empty RBR (Receive
Buffer Register) while the FIFO is enabled.
In serial8250_do_startup(), calling serial_port_out(port, UART_LCR,
UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes
dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter
function enables the FIFO via serial_out(p, UART_FCR, p->fcr).
Execution proceeds to the serial_port_in(port, UART_RX).
This satisfies the PSLVERR trigger condition.
When another CPU (e.g., using printk()) is accessing the UART (UART
is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) ==
(lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter
dw8250_force_idle().
Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock
to fix this issue.
Panic backtrace:
[ 0.442336] Oops - unknown exception [#1]
[ 0.442343] epc : dw8250_serial_in32+0x1e/0x4a
[ 0.442351] ra : serial8250_do_startup+0x2c8/0x88e
...
[ 0.442416] console_on_rootfs+0x26/0x70 |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: pfr_update: Fix the driver update version check
The security-version-number check should be used rather
than the runtime version check for driver updates.
Otherwise, the firmware update would fail when the update binary had
a lower runtime version number than the current one.
[ rjw: Changelog edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper
Since
923f3a2b48bd ("x86/resctrl: Query LLC monitoring properties once during boot")
resctrl_cpu_detect() has been moved from common CPU initialization code to
the vendor-specific BSP init helper, while Hygon didn't put that call in their
code.
This triggers a division by zero fault during early booting stage on our
machines with X86_FEATURE_CQM* supported, where get_rdt_mon_resources() tries
to calculate mon_l3_config with uninitialized boot_cpu_data.x86_cache_occ_scale.
Add the missing resctrl_cpu_detect() in the Hygon BSP init helper.
[ bp: Massage commit message. ] |
| In the Linux kernel, the following vulnerability has been resolved:
loop: Avoid updating block size under exclusive owner
Syzbot came up with a reproducer where a loop device block size is
changed underneath a mounted filesystem. This causes a mismatch between
the block device block size and the block size stored in the superblock
causing confusion in various places such as fs/buffer.c. The particular
issue triggered by syzbot was a warning in __getblk_slow() due to
requested buffer size not matching block device block size.
Fix the problem by getting exclusive hold of the loop device to change
its block size. This fails if somebody (such as filesystem) has already
an exclusive ownership of the block device and thus prevents modifying
the loop device under some exclusive owner which doesn't expect it. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: qup: jump out of the loop in case of timeout
Original logic only sets the return value but doesn't jump out of the
loop if the bus is kept active by a client. This is not expected. A
malicious or buggy i2c client can hang the kernel in this case and
should be avoided. This is observed during a long time test with a
PCA953x GPIO extender.
Fix it by changing the logic to not only sets the return value, but also
jumps out of the loop and return to the caller with -ETIMEDOUT. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: pnv_php: Clean up allocated IRQs on unplug
When the root of a nested PCIe bridge configuration is unplugged, the
pnv_php driver leaked the allocated IRQ resources for the child bridges'
hotplug event notifications, resulting in a panic.
Fix this by walking all child buses and deallocating all its IRQ resources
before calling pci_hp_remove_devices().
Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so
that it is only destroyed in pnv_php_free_slot(), instead of
pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will
now be called by workers triggered by hot unplug interrupts, so the
workqueue needs to stay allocated.
The abridged kernel panic that occurs without this patch is as follows:
WARNING: CPU: 0 PID: 687 at kernel/irq/msi.c:292 msi_device_data_release+0x6c/0x9c
CPU: 0 UID: 0 PID: 687 Comm: bash Not tainted 6.14.0-rc5+ #2
Call Trace:
msi_device_data_release+0x34/0x9c (unreliable)
release_nodes+0x64/0x13c
devres_release_all+0xc0/0x140
device_del+0x2d4/0x46c
pci_destroy_dev+0x5c/0x194
pci_hp_remove_devices+0x90/0x128
pci_hp_remove_devices+0x44/0x128
pnv_php_disable_slot+0x54/0xd4
power_write_file+0xf8/0x18c
pci_slot_attr_store+0x40/0x5c
sysfs_kf_write+0x64/0x78
kernfs_fop_write_iter+0x1b0/0x290
vfs_write+0x3bc/0x50c
ksys_write+0x84/0x140
system_call_exception+0x124/0x230
system_call_vectored_common+0x15c/0x2ec
[bhelgaas: tidy comments] |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: pnv_php: Fix surprise plug detection and recovery
The existing PowerNV hotplug code did not handle surprise plug events
correctly, leading to a complete failure of the hotplug system after device
removal and a required reboot to detect new devices.
This comes down to two issues:
1) When a device is surprise removed, often the bridge upstream
port will cause a PE freeze on the PHB. If this freeze is not
cleared, the MSI interrupts from the bridge hotplug notification
logic will not be received by the kernel, stalling all plug events
on all slots associated with the PE.
2) When a device is removed from a slot, regardless of surprise or
programmatic removal, the associated PHB/PE ls left frozen.
If this freeze is not cleared via a fundamental reset, skiboot
is unable to clear the freeze and cannot retrain / rescan the
slot. This also requires a reboot to clear the freeze and redetect
the device in the slot.
Issue the appropriate unfreeze and rescan commands on hotplug events,
and don't oops on hotplug if pci_bus_to_OF_node() returns NULL.
[bhelgaas: tidy comments] |
