| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was identified in Linux Kernel up to 4.19.316/5.4.278/5.10.220/5.15.161. This impacts the function tcp_getsockopt/tcp_setsockopt of the component TCP Handler. Such manipulation leads to race condition. A high complexity level is associated with this attack. The exploitability is said to be difficult. The vulnerability was introduced in 2.6.12, commit 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 ("Linux-2.6.12-rc2"). Upgrading to version 4.19.317, 5.4.279, 5.10.221, 5.15.162 and 6.1 will fix this issue. The name of the patch is fcd31dd8291b23d713245947ec2b2d99ef07aef2/3b32f265805a49071e2c4568a524398ba22bf93c/d529193eae979a7bf2255cd9fe68b7af7a1c91b3/5bb642cc3355ffd3c8bca0a8bd8e6e65bcc2091c/f49cd2f4d6170d27a2c61f1fecb03d8a70c91f57. The affected component should be upgraded. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: us144mkii: re-anchor capture URBs on resubmission
capture_urb_complete() resubmits each capture URB without anchoring it:
usb_get_urb(urb);
ret = usb_submit_urb(urb, GFP_ATOMIC);
Anchoring is a property of a submission, not of the URB. The giveback
path calls usb_unanchor_urb() before urb->complete(), so an URB
resubmitted from its own completion handler is off the anchor. The
capture URBs are anchored once, at stream start, so from the first
completion onward tascam->capture_anchor is empty.
tascam_free_urbs(), tascam_disconnect(), tascam_suspend() and the
stop-work path all call usb_kill_anchored_urbs(&tascam->capture_anchor)
to reap the capture URBs before anything is freed. With the anchor empty
those calls return immediately and the URBs stay queued on the host
controller.
tascam_free_urbs() then returns the capture transfer buffers with
usb_free_coherent(), and snd_card_free() releases the snd_card
allocation that embeds tascam (card->private_data). The controller
completes the queued URBs afterwards, writing device-supplied data into
the freed transfer buffer, and capture_urb_complete() dereferences the
freed driver object.
KASAN on 7.2.0-rc5 (arm64):
BUG: KASAN: slab-use-after-free in dummy_timer
Write of size 512 at addr ffff000015b62000
__asan_memcpy
dummy_timer
hrtimer_run_softirq
Allocated by task 64:
usb_alloc_coherent
tascam_alloc_urbs
tascam_probe
Freed by task 170:
usb_free_coherent
tascam_free_urbs
tascam_disconnect
usb_unbind_interface
BUG: KASAN: slab-use-after-free in capture_urb_complete
Read of size 4 at addr ffff0000170ee878
Freed by task 170:
release_card_device
snd_card_free
tascam_disconnect
Restore the usb_anchor_urb() between the reference count bump and the
resubmission. That also makes the handler's usb_unanchor_urb() failure
arm meaningful again and restores usb_kill_anchored_urbs() as a barrier
on the disconnect, suspend and stop-work paths.
The anchoring was removed on the premise that the URB is already anchored
from the initial submission, which does not hold once the first giveback
has run.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: validate session type before performing operation
The sessions ioctls are not applicable to all session types. PRESERVE_FD
is only applicable to outgoing sessions. RETRIEVE_FD and FINISH are only
valid for incoming session. Calling a incoming ioctl on an outgoing
session is invalid and can cause file handlers to run into unexpected
errors.
For example, a user can create a (outgoing) session, preserve a memfd,
and then immediately do a retrieve without doing a kexec in between.
This would result in memfd's retrieve handler to run. The handlers
expects to be called from a post-kexec context, and will try to do a
kho_restore_vmalloc() or kho_restore_folio() to try and restore memory.
KHO catches this (thanks to KHO_PAGE_MAGIC) and returns an error, but
since this is considered an internal error and KHO throws out a bunch of
WARN()s.
Associate a type with each ioctl op and validate the type in
luo_session_ioctl() before dispatching the ioctl handler to make sure
the op is being called for the right session type. |
| In the Linux kernel, the following vulnerability has been resolved:
debugobjects: Plug race against a concurrent OOM disable
syzbot reported a puzzling splat:
WARNING: kernel/time/hrtimer.c:443 at stub_timer+0xa/0x20
stub_timer() is installed as timer callback function in
hrtimer_fixup_assert_init(), which is invoked when
debug_object_assert_init() can't find a shadow object. In that case debug
objects emits a warning about it before invoking the fixup.
Though the provided console log lacks this warning and instead has the
following a few seconds before the splat:
ODEBUG: Out of memory. ODEBUG disabled
So the object was looked up in debug_object_assert_init() and the lookup
failed due a concurrent out of memory situation which disabled debug
objects and freed the shadow objects:
debug_object_assert_init()
if (!debug_objects_enabled)
return; obj = alloc();
if (!obj) {
// Out of memory
debug_objects_enabled = false;
free_objects();
obj = lookup_or_alloc();
// The lookup failed because the other side
// removed the objects, so this returns
// an error code as the object in question
// is not statically initialized
if (!IS_ERR_OR_NULL(obj))
return;
if (!obj) {
debug_oom();
return;
}
print(...)
if (!debug_objects_enabled)
return;
fixup(...)
The debug object splat is skipped because debug_objects_enabled is false,
but the fixup callback is invoked unconditionally, which makes the timer
disfunctional.
This is only a problem in debug_object_assert_init() and
debug_object_activate() as both have to handle statically initialized
objects and therefore must handle the error pointer return case
gracefully. All other places only handle the found/not found case and the
NULL pointer return is a signal for OOM. Otherwise they get a valid shadow
object.
Plug the hole by checking whether debug objects are still enabled before
invoking the print and fixup function in those two places. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: connac: do not check WED status for non-mmio devices
WED is supported just for mmio devices, so do not check it for usb or
sdio devices. This patch fixes the crash reported below:
[ 21.946627] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d
[ 22.525298] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3)
[ 22.548274] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d
[ 22.557694] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3)
[ 22.565885] wlp0s3u1i3: authenticated
[ 22.569502] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 1/3)
[ 22.578966] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=30 aid=3)
[ 22.579113] wlp0s3u1i3: c4:41:1e:f5:2b:1d rejected association temporarily; comeback duration 1000 TU (1024 ms)
[ 23.649518] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 2/3)
[ 23.752528] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=0 aid=3)
[ 23.797450] wlp0s3u1i3: associated
[ 24.959527] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[ 24.959640] BUG: unable to handle page fault for address: ffff88800c223200
[ 24.959706] #PF: supervisor instruction fetch in kernel mode
[ 24.959788] #PF: error_code(0x0011) - permissions violation
[ 24.959846] PGD 2c01067 P4D 2c01067 PUD 2c02067 PMD c2a8063 PTE 800000000c223163
[ 24.959957] Oops: 0011 [#1] PREEMPT SMP
[ 24.960009] CPU: 0 PID: 391 Comm: wpa_supplicant Not tainted 6.2.0-kvm #18
[ 24.960089] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014
[ 24.960191] RIP: 0010:0xffff88800c223200
[ 24.960446] RSP: 0018:ffffc90000ff7698 EFLAGS: 00010282
[ 24.960513] RAX: ffff888028397010 RBX: ffff88800c26e630 RCX: 0000000000000058
[ 24.960598] RDX: ffff88800c26f844 RSI: 0000000000000006 RDI: ffff888028397010
[ 24.960682] RBP: ffff88800ea72f00 R08: 18b873fbab2b964c R09: be06b38235f3c63c
[ 24.960766] R10: 18b873fbab2b964c R11: be06b38235f3c63c R12: 0000000000000001
[ 24.960853] R13: ffff88800c26f84c R14: ffff8880063f0ff8 R15: ffff88800c26e644
[ 24.960950] FS: 00007effcea327c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
[ 24.961036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 24.961106] CR2: ffff88800c223200 CR3: 000000000eaa2000 CR4: 00000000000006b0
[ 24.961190] Call Trace:
[ 24.961219] <TASK>
[ 24.961245] ? mt76_connac_mcu_add_key+0x2cf/0x310
[ 24.961313] ? mt7921_set_key+0x150/0x200
[ 24.961365] ? drv_set_key+0xa9/0x1b0
[ 24.961418] ? ieee80211_key_enable_hw_accel+0xd9/0x240
[ 24.961485] ? ieee80211_key_replace+0x3f3/0x730
[ 24.961541] ? crypto_shash_setkey+0x89/0xd0
[ 24.961597] ? ieee80211_key_link+0x2d7/0x3a0
[ 24.961664] ? crypto_aead_setauthsize+0x31/0x50
[ 24.961730] ? sta_info_hash_lookup+0xa6/0xf0
[ 24.961785] ? ieee80211_add_key+0x1fc/0x250
[ 24.961842] ? rdev_add_key+0x41/0x140
[ 24.961882] ? nl80211_parse_key+0x6c/0x2f0
[ 24.961940] ? nl80211_new_key+0x24a/0x290
[ 24.961984] ? genl_rcv_msg+0x36c/0x3a0
[ 24.962036] ? rdev_mod_link_station+0xe0/0xe0
[ 24.962102] ? nl80211_set_key+0x410/0x410
[ 24.962143] ? nl80211_pre_doit+0x200/0x200
[ 24.962187] ? genl_bind+0xc0/0xc0
[ 24.962217] ? netlink_rcv_skb+0xaa/0xd0
[ 24.962259] ? genl_rcv+0x24/0x40
[ 24.962300] ? netlink_unicast+0x224/0x2f0
[ 24.962345] ? netlink_sendmsg+0x30b/0x3d0
[ 24.962388] ? ____sys_sendmsg+0x109/0x1b0
[ 24.962388] ? ____sys_sendmsg+0x109/0x1b0
[ 24.962440] ? __import_iovec+0x2e/0x110
[ 24.962482] ? ___sys_sendmsg+0xbe/0xe0
[ 24.962525] ? mod_objcg_state+0x25c/0x330
[ 24.962576] ? __dentry_kill+0x19e/0x1d0
[ 24.962618] ? call_rcu+0x18f/0x270
[ 24.962660] ? __dentry_kill+0x19e/0x1d0
[ 24.962702] ? __x64_sys_sendmsg+0x70/0x90
[ 24.962744] ? do_syscall_64+0x3d/0x80
[ 24.962796] ? exit_to_user_mode_prepare+0x1b/0x70
[ 24.962852] ? entry_SYSCA
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: do not clobber swp_entry_t during THP split
The following has been observed when running stressng mmap since commit
b653db77350c ("mm: Clear page->private when splitting or migrating a page")
watchdog: BUG: soft lockup - CPU#75 stuck for 26s! [stress-ng:9546]
CPU: 75 PID: 9546 Comm: stress-ng Tainted: G E 6.0.0-revert-b653db77-fix+ #29 0357d79b60fb09775f678e4f3f64ef0579ad1374
Hardware name: SGI.COM C2112-4GP3/X10DRT-P-Series, BIOS 2.0a 05/09/2016
RIP: 0010:xas_descend+0x28/0x80
Code: cc cc 0f b6 0e 48 8b 57 08 48 d3 ea 83 e2 3f 89 d0 48 83 c0 04 48 8b 44 c6 08 48 89 77 18 48 89 c1 83 e1 03 48 83 f9 02 75 08 <48> 3d fd 00 00 00 76 08 88 57 12 c3 cc cc cc cc 48 c1 e8 02 89 c2
RSP: 0018:ffffbbf02a2236a8 EFLAGS: 00000246
RAX: ffff9cab7d6a0002 RBX: ffffe04b0af88040 RCX: 0000000000000002
RDX: 0000000000000030 RSI: ffff9cab60509b60 RDI: ffffbbf02a2236c0
RBP: 0000000000000000 R08: ffff9cab60509b60 R09: ffffbbf02a2236c0
R10: 0000000000000001 R11: ffffbbf02a223698 R12: 0000000000000000
R13: ffff9cab4e28da80 R14: 0000000000039c01 R15: ffff9cab4e28da88
FS: 00007fab89b85e40(0000) GS:ffff9cea3fcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fab84e00000 CR3: 00000040b73a4003 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
xas_load+0x3a/0x50
__filemap_get_folio+0x80/0x370
? put_swap_page+0x163/0x360
pagecache_get_page+0x13/0x90
__try_to_reclaim_swap+0x50/0x190
scan_swap_map_slots+0x31e/0x670
get_swap_pages+0x226/0x3c0
folio_alloc_swap+0x1cc/0x240
add_to_swap+0x14/0x70
shrink_page_list+0x968/0xbc0
reclaim_page_list+0x70/0xf0
reclaim_pages+0xdd/0x120
madvise_cold_or_pageout_pte_range+0x814/0xf30
walk_pgd_range+0x637/0xa30
__walk_page_range+0x142/0x170
walk_page_range+0x146/0x170
madvise_pageout+0xb7/0x280
? asm_common_interrupt+0x22/0x40
madvise_vma_behavior+0x3b7/0xac0
? find_vma+0x4a/0x70
? find_vma+0x64/0x70
? madvise_vma_anon_name+0x40/0x40
madvise_walk_vmas+0xa6/0x130
do_madvise+0x2f4/0x360
__x64_sys_madvise+0x26/0x30
do_syscall_64+0x5b/0x80
? do_syscall_64+0x67/0x80
? syscall_exit_to_user_mode+0x17/0x40
? do_syscall_64+0x67/0x80
? syscall_exit_to_user_mode+0x17/0x40
? do_syscall_64+0x67/0x80
? do_syscall_64+0x67/0x80
? common_interrupt+0x8b/0xa0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The problem can be reproduced with the mmtests config
config-workload-stressng-mmap. It does not always happen and when it
triggers is variable but it has happened on multiple machines.
The intent of commit b653db77350c patch was to avoid the case where
PG_private is clear but folio->private is not-NULL. However, THP tail
pages uses page->private for "swp_entry_t if folio_test_swapcache()" as
stated in the documentation for struct folio. This patch only clobbers
page->private for tail pages if the head page was not in swapcache and
warns once if page->private had an unexpected value. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix PTE marker handling in hugetlb_change_protection()
Patch series "mm/hugetlb: uffd-wp fixes for hugetlb_change_protection()".
Playing with virtio-mem and background snapshots (using uffd-wp) on
hugetlb in QEMU, I managed to trigger a VM_BUG_ON(). Looking into the
details, hugetlb_change_protection() seems to not handle uffd-wp correctly
in all cases.
Patch #1 fixes my test case. I don't have reproducers for patch #2, as it
requires running into migration entries.
I did not yet check in detail yet if !hugetlb code requires similar care.
This patch (of 2):
There are two problematic cases when stumbling over a PTE marker in
hugetlb_change_protection():
(1) We protect an uffd-wp PTE marker a second time using uffd-wp: we will
end up in the "!huge_pte_none(pte)" case and mess up the PTE marker.
(2) We unprotect a uffd-wp PTE marker: we will similarly end up in the
"!huge_pte_none(pte)" case even though we cleared the PTE, because
the "pte" variable is stale. We'll mess up the PTE marker.
For example, if we later stumble over such a "wrongly modified" PTE marker,
we'll treat it like a present PTE that maps some garbage page.
This can, for example, be triggered by mapping a memfd backed by huge
pages, registering uffd-wp, uffd-wp'ing an unmapped page and (a)
uffd-wp'ing it a second time; or (b) uffd-unprotecting it; or (c)
unregistering uffd-wp. Then, ff we trigger fallocate(FALLOC_FL_PUNCH_HOLE)
on that file range, we will run into a VM_BUG_ON:
[ 195.039560] page:00000000ba1f2987 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x0
[ 195.039565] flags: 0x7ffffc0001000(reserved|node=0|zone=0|lastcpupid=0x1fffff)
[ 195.039568] raw: 0007ffffc0001000 ffffe742c0000008 ffffe742c0000008 0000000000000000
[ 195.039569] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
[ 195.039569] page dumped because: VM_BUG_ON_PAGE(compound && !PageHead(page))
[ 195.039573] ------------[ cut here ]------------
[ 195.039574] kernel BUG at mm/rmap.c:1346!
[ 195.039579] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 195.039581] CPU: 7 PID: 4777 Comm: qemu-system-x86 Not tainted 6.0.12-200.fc36.x86_64 #1
[ 195.039583] Hardware name: LENOVO 20WNS1F81N/20WNS1F81N, BIOS N35ET50W (1.50 ) 09/15/2022
[ 195.039584] RIP: 0010:page_remove_rmap+0x45b/0x550
[ 195.039588] Code: [...]
[ 195.039589] RSP: 0018:ffffbc03c3633ba8 EFLAGS: 00010292
[ 195.039591] RAX: 0000000000000040 RBX: ffffe742c0000000 RCX: 0000000000000000
[ 195.039592] RDX: 0000000000000002 RSI: ffffffff8e7aac1a RDI: 00000000ffffffff
[ 195.039592] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffbc03c3633a08
[ 195.039593] R10: 0000000000000003 R11: ffffffff8f146328 R12: ffff9b04c42754b0
[ 195.039594] R13: ffffffff8fcc6328 R14: ffffbc03c3633c80 R15: ffff9b0484ab9100
[ 195.039595] FS: 00007fc7aaf68640(0000) GS:ffff9b0bbf7c0000(0000) knlGS:0000000000000000
[ 195.039596] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 195.039597] CR2: 000055d402c49110 CR3: 0000000159392003 CR4: 0000000000772ee0
[ 195.039598] PKRU: 55555554
[ 195.039599] Call Trace:
[ 195.039600] <TASK>
[ 195.039602] __unmap_hugepage_range+0x33b/0x7d0
[ 195.039605] unmap_hugepage_range+0x55/0x70
[ 195.039608] hugetlb_vmdelete_list+0x77/0xa0
[ 195.039611] hugetlbfs_fallocate+0x410/0x550
[ 195.039612] ? _raw_spin_unlock_irqrestore+0x23/0x40
[ 195.039616] vfs_fallocate+0x12e/0x360
[ 195.039618] __x64_sys_fallocate+0x40/0x70
[ 195.039620] do_syscall_64+0x58/0x80
[ 195.039623] ? syscall_exit_to_user_mode+0x17/0x40
[ 195.039624] ? do_syscall_64+0x67/0x80
[ 195.039626] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 195.039628] RIP: 0033:0x7fc7b590651f
[ 195.039653] Code: [...]
[ 195.039654] RSP: 002b:00007fc7aaf66e70 EFLAGS: 00000293 ORIG_RAX: 000000000000011d
[ 195.039655] RAX: ffffffffffffffda RBX: 0000558ef4b7f370 RCX: 00007fc7b590651f
---truncated--- |
| A vulnerability was identified in Linux Kernel 33fc42de33278b2b3ec6f3390512987bc29a62b7. This affects the function __mtk_ppe_check_skb of the file drivers/net/ethernet/mediatek/mtk_ppe.c of the component Ethernet Handler. Such manipulation leads to use after free. The name of the patch is 17a5f6a78dc7b8db385de346092d7d9f9dc24df6. It is best practice to apply a patch to resolve this issue. No released Linux Kernel version was ever affected by this CVE. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: clip: Fix infinite recursive call of clip_push().
syzbot reported the splat below. [0]
This happens if we call ioctl(ATMARP_MKIP) more than once.
During the first call, clip_mkip() sets clip_push() to vcc->push(),
and the second call copies it to clip_vcc->old_push().
Later, when the socket is close()d, vcc_destroy_socket() passes
NULL skb to clip_push(), which calls clip_vcc->old_push(),
triggering the infinite recursion.
Let's prevent the second ioctl(ATMARP_MKIP) by checking
vcc->user_back, which is allocated by the first call as clip_vcc.
Note also that we use lock_sock() to prevent racy calls.
[0]:
BUG: TASK stack guard page was hit at ffffc9000d66fff8 (stack is ffffc9000d670000..ffffc9000d678000)
Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5322 Comm: syz.0.0 Not tainted 6.16.0-rc4-syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:clip_push+0x5/0x720 net/atm/clip.c:191
Code: e0 8f aa 8c e8 1c ad 5b fa eb ae 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 55 <41> 57 41 56 41 55 41 54 53 48 83 ec 20 48 89 f3 49 89 fd 48 bd 00
RSP: 0018:ffffc9000d670000 EFLAGS: 00010246
RAX: 1ffff1100235a4a5 RBX: ffff888011ad2508 RCX: ffff8880003c0000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888037f01000
RBP: dffffc0000000000 R08: ffffffff8fa104f7 R09: 1ffffffff1f4209e
R10: dffffc0000000000 R11: ffffffff8a99b300 R12: ffffffff8a99b300
R13: ffff888037f01000 R14: ffff888011ad2500 R15: ffff888037f01578
FS: 000055557ab6d500(0000) GS:ffff88808d250000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc9000d66fff8 CR3: 0000000043172000 CR4: 0000000000352ef0
Call Trace:
<TASK>
clip_push+0x6dc/0x720 net/atm/clip.c:200
clip_push+0x6dc/0x720 net/atm/clip.c:200
clip_push+0x6dc/0x720 net/atm/clip.c:200
...
clip_push+0x6dc/0x720 net/atm/clip.c:200
clip_push+0x6dc/0x720 net/atm/clip.c:200
clip_push+0x6dc/0x720 net/atm/clip.c:200
vcc_destroy_socket net/atm/common.c:183 [inline]
vcc_release+0x157/0x460 net/atm/common.c:205
__sock_release net/socket.c:647 [inline]
sock_close+0xc0/0x240 net/socket.c:1391
__fput+0x449/0xa70 fs/file_table.c:465
task_work_run+0x1d1/0x260 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xec/0x110 kernel/entry/common.c:114
exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline]
do_syscall_64+0x2bd/0x3b0 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff31c98e929
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fffb5aa1f78 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4
RAX: 0000000000000000 RBX: 0000000000012747 RCX: 00007ff31c98e929
RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003
RBP: 00007ff31cbb7ba0 R08: 0000000000000001 R09: 0000000db5aa226f
R10: 00007ff31c7ff030 R11: 0000000000000246 R12: 00007ff31cbb608c
R13: 00007ff31cbb6080 R14: ffffffffffffffff R15: 00007fffb5aa2090
</TASK>
Modules linked in: |
| The do_sigaltstack function in kernel/signal.c in Linux kernel 2.4 through 2.4.37 and 2.6 before 2.6.31-rc5, when running on 64-bit systems, does not clear certain padding bytes from a structure, which allows local users to obtain sensitive information from the kernel stack via the sigaltstack function. |
| Integer underflow in the e1000_clean_rx_irq function in drivers/net/e1000/e1000_main.c in the e1000 driver in the Linux kernel before 2.6.30-rc8, the e1000e driver in the Linux kernel, and Intel Wired Ethernet (aka e1000) before 7.5.5 allows remote attackers to cause a denial of service (panic) via a crafted frame size. |
| Stack-based buffer overflow in the parse_tag_11_packet function in fs/ecryptfs/keystore.c in the eCryptfs subsystem in the Linux kernel before 2.6.30.4 allows local users to cause a denial of service (system crash) or possibly gain privileges via vectors involving a crafted eCryptfs file, related to not ensuring that the key signature length in a Tag 11 packet is compatible with the key signature buffer size. |
| The init_posix_timers function in kernel/posix-timers.c in the Linux kernel before 2.6.31-rc6 allows local users to cause a denial of service (OOPS) or possibly gain privileges via a CLOCK_MONOTONIC_RAW clock_nanosleep call that triggers a NULL pointer dereference. |
| cfg80211 in net/wireless/scan.c in the Linux kernel 2.6.30-rc1 and other versions before 2.6.31-rc6 allows remote attackers to cause a denial of service (crash) via a sequence of beacon frames in which one frame omits an SSID Information Element (IE) and the subsequent frame contains an SSID IE, which triggers a NULL pointer dereference in the cmp_ies function. NOTE: a potential weakness in the is_mesh function was also addressed, but the relevant condition did not exist in the code, so it is not a vulnerability. |
| The get_instantiation_keyring function in security/keys/keyctl.c in the KEYS subsystem in the Linux kernel before 2.6.32-rc5 does not properly maintain the reference count of a keyring, which allows local users to gain privileges or cause a denial of service (OOPS) via vectors involving calls to this function without specifying a keyring by ID, as demonstrated by a series of keyctl request2 and keyctl list commands. |
| Buffer overflow in the RTL8169 NIC driver (drivers/net/r8169.c) in the Linux kernel before 2.6.30 allows remote attackers to cause a denial of service (kernel memory corruption and crash) via a long packet. |
| The do_mremap function for the mremap system call in Linux 2.2 to 2.2.25, 2.4 to 2.4.24, and 2.6 to 2.6.2, does not properly check the return value from the do_munmap function when the maximum number of VMA descriptors is exceeded, which allows local users to gain root privileges, a different vulnerability than CAN-2003-0985. |
| bt_sock_recvmsg in net/bluetooth/af_bluetooth.c in the Linux kernel through 6.6.8 has a use-after-free because of a bt_sock_ioctl race condition. |
| In the Linux kernel through 6.9, an untrusted hypervisor can inject virtual interrupts 0 and 14 at any point in time and can trigger the SIGFPE signal handler in userspace applications. This affects AMD SEV-SNP and AMD SEV-ES. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu-tasks: Fix race in schedule and flush work
While booting secondary CPUs, cpus_read_[lock/unlock] is not keeping
online cpumask stable. The transient online mask results in below
calltrace.
[ 0.324121] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.346652] Detected PIPT I-cache on CPU2
[ 0.347212] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.377255] Detected PIPT I-cache on CPU3
[ 0.377823] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.379040] ------------[ cut here ]------------
[ 0.383662] WARNING: CPU: 0 PID: 10 at kernel/workqueue.c:3084 __flush_work+0x12c/0x138
[ 0.384850] Modules linked in:
[ 0.385403] CPU: 0 PID: 10 Comm: rcu_tasks_rude_ Not tainted 5.17.0-rc3-v8+ #13
[ 0.386473] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT)
[ 0.387289] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.388308] pc : __flush_work+0x12c/0x138
[ 0.388970] lr : __flush_work+0x80/0x138
[ 0.389620] sp : ffffffc00aaf3c60
[ 0.390139] x29: ffffffc00aaf3d20 x28: ffffffc009c16af0 x27: ffffff80f761df48
[ 0.391316] x26: 0000000000000004 x25: 0000000000000003 x24: 0000000000000100
[ 0.392493] x23: ffffffffffffffff x22: ffffffc009c16b10 x21: ffffffc009c16b28
[ 0.393668] x20: ffffffc009e53861 x19: ffffff80f77fbf40 x18: 00000000d744fcc9
[ 0.394842] x17: 000000000000000b x16: 00000000000001c2 x15: ffffffc009e57550
[ 0.396016] x14: 0000000000000000 x13: ffffffffffffffff x12: 0000000100000000
[ 0.397190] x11: 0000000000000462 x10: ffffff8040258008 x9 : 0000000100000000
[ 0.398364] x8 : 0000000000000000 x7 : ffffffc0093c8bf4 x6 : 0000000000000000
[ 0.399538] x5 : 0000000000000000 x4 : ffffffc00a976e40 x3 : ffffffc00810444c
[ 0.400711] x2 : 0000000000000004 x1 : 0000000000000000 x0 : 0000000000000000
[ 0.401886] Call trace:
[ 0.402309] __flush_work+0x12c/0x138
[ 0.402941] schedule_on_each_cpu+0x228/0x278
[ 0.403693] rcu_tasks_rude_wait_gp+0x130/0x144
[ 0.404502] rcu_tasks_kthread+0x220/0x254
[ 0.405264] kthread+0x174/0x1ac
[ 0.405837] ret_from_fork+0x10/0x20
[ 0.406456] irq event stamp: 102
[ 0.406966] hardirqs last enabled at (101): [<ffffffc0093c8468>] _raw_spin_unlock_irq+0x78/0xb4
[ 0.408304] hardirqs last disabled at (102): [<ffffffc0093b8270>] el1_dbg+0x24/0x5c
[ 0.409410] softirqs last enabled at (54): [<ffffffc0081b80c8>] local_bh_enable+0xc/0x2c
[ 0.410645] softirqs last disabled at (50): [<ffffffc0081b809c>] local_bh_disable+0xc/0x2c
[ 0.411890] ---[ end trace 0000000000000000 ]---
[ 0.413000] smp: Brought up 1 node, 4 CPUs
[ 0.413762] SMP: Total of 4 processors activated.
[ 0.414566] CPU features: detected: 32-bit EL0 Support
[ 0.415414] CPU features: detected: 32-bit EL1 Support
[ 0.416278] CPU features: detected: CRC32 instructions
[ 0.447021] Callback from call_rcu_tasks_rude() invoked.
[ 0.506693] Callback from call_rcu_tasks() invoked.
This commit therefore fixes this issue by applying a single-CPU
optimization to the RCU Tasks Rude grace-period process. The key point
here is that the purpose of this RCU flavor is to force a schedule on
each online CPU since some past event. But the rcu_tasks_rude_wait_gp()
function runs in the context of the RCU Tasks Rude's grace-period kthread,
so there must already have been a context switch on the current CPU since
the call to either synchronize_rcu_tasks_rude() or call_rcu_tasks_rude().
So if there is only a single CPU online, RCU Tasks Rude's grace-period
kthread does not need to anything at all.
It turns out that the rcu_tasks_rude_wait_gp() function's call to
schedule_on_each_cpu() causes problems during early boot. During that
time, there is only one online CPU, namely the boot CPU. Therefore,
applying this single-CPU optimization fixes early-boot instances of
this problem. |
