| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's URL normalization does not recognize dot and dotdot path segments when they carry semicolon parameters. A request such as /user/..;foo=bar/admin is therefore not canonicalized to /admin even when path normalization is enabled. If an upstream interprets the segment according to RFC 3986 while Envoy applies routing or RBAC to the uncollapsed path, a remote client can cause path confusion and bypass path-based security policy. The relevant scope boundary is that the security consequence depends on a downstream/upstream path interpretation mismatch or a path-based Envoy decision. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy's /stats?format=html admin endpoint uses StatsHtmlRender, which sanitizes string statistic values but emits statistic names without HTML encoding. A data-plane component such as grpc_stats with stats_for_all_methods enabled can incorporate attacker-controlled path segments into cached dynamic statistic names. When an operator views the HTML stats page, the stored name can execute script with the admin interface's origin and issue privileged same-origin requests. The relevant scope boundary is that the admin interface must be browser-accessible and an enabled component must persist attacker-influenced text in statistic names. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. |
| CNCF Envoy through 1.13.0 may consume excessive amounts of memory when proxying HTTP/1.1 requests or responses with many small (i.e. 1 byte) chunks. |
| CNCF Envoy through 1.13.0 has incorrect Access Control when using SDS with Combined Validation Context. Using the same secret (e.g. trusted CA) across many resources together with the combined validation context could lead to the “static” part of the validation context to be not applied, even though it was visible in the active config dump. |
| CNCF Envoy through 1.13.0 may consume excessive amounts of memory when responding internally to pipelined requests. |
| Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, the xDS gRPC server in GatewayNamespaceMode, configured through provider.kubernetes.deploy.type=GatewayNamespace, installs a JWT StreamInterceptor but no UnaryInterceptor, leaving every unary Fetch RPC unauthenticated. The streaming interceptor also authenticates only discoveryv3.DeltaDiscoveryRequest messages; a discoveryv3.DiscoveryRequest used by the State-of-the-World protocol fails the type assertion and returns success without JWT validation. Any pod that can reach port 18000 can use the unauthenticated unary or State-of-the-World paths to retrieve TLS private keys through StreamSecrets, all xDS resources through StreamAggregatedResources, backend endpoints through StreamClusters or StreamEndpoints, and routing configuration through StreamRoutes or StreamListeners. This issue is fixed in versions 1.7.4 and 1.8.1. |
| Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, translateSecurityPolicyForRoute in internal/gatewayapi/securitypolicy.go dereferences a nil authorization value when a namespace-scoped tenant creates a SecurityPolicy targeting a TCPRoute and omits spec.authorization. The persistent object triggers the panic on every reconcile; recovery in message/watchutil.go keeps the process alive but unwinds the runner/runner.go handle callback, stalling controller-wide xDS and infrastructure intermediate-representation publishing until an administrator deletes the object. The data plane continues to serve the last known good configuration while publication is stalled. This issue is fixed in versions 1.7.4 and 1.8.1. |
| Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, to_absolute_normalized_path in internal/gatewayapi/luavalidator/security.lua does not collapse redundant separators before is_critical_path evaluates Lua submitted through EnvoyExtensionPolicy during default Strict validation. Linux resolves a double-slash absolute path as the corresponding single-slash path, but the validator does not match the redundant-separator form, allowing submitted Lua to read arbitrary files from the gateway controller pod. Exposed files can include Kubernetes service-account tokens, TLS certificates, and process environment data, and the disclosed credentials can provide access to sensitive Kubernetes API Server or Gateway xDS server information. This issue is fixed in versions 1.7.4 and 1.8.1. |
| Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, getFileFromGZ in internal/wasm/httpfetcher.go calls io.ReadAll on a gzip.Reader without limiting decompressed output when a tenant-controlled EnvoyExtensionPolicy.spec.wasm[].code.http.url points to a reachable compressed Wasm payload. The 256 MiB compressed-input cap does not constrain the expanded size, no operator Wasm URL allowlist exists, and the optional sha256 check occurs only after decompression, so a comparatively small gzip stream can force a multi-gigabyte allocation in the shared controller. The resulting out-of-memory termination restarts the controller, re-reconciles the persistent custom resource, and can create a persistent cross-tenant control-plane outage. This issue is fixed in versions 1.7.4 and 1.8.1. |
| Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, internal/wasm/imagefetcher.go follows tenant-controlled EnvoyExtensionPolicy spec.wasm[].code.image.url values to Docker or OCI Wasm layers, and extractWasmPluginBinary uses the untrusted tar-header h.Size value to allocate memory before validating the entry name or declared size. A small PAX or GNU tar header can therefore claim a multi-terabyte entry even though the surrounding LimitReader restricts only the bytes read from the stream, and no registry allowlist prevents a permitted tenant from selecting an attacker-controlled registry that the controller can reach. The allocation is attempted for every tar entry and can cause an unrecoverable Go runtime out-of-memory failure; because the custom resource persists, reconciliation repeatedly crash-loops the shared controller and causes a single-request, non-volumetric, cluster-wide control-plane denial of service. This issue is fixed in versions 1.7.4 and 1.8.1. |
| Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, HTTPServer.ServeHTTP in internal/wasm/httpserver.go reads the plain mappingPath2Cache map without synchronization while HTTPServer.Get writes the same map during EnvoyExtensionPolicy translation. An attacker with pod-network access to unauthenticated port 18002 and tenant permission to churn policies with distinct Wasm URLs can flood GET requests until a per-request reader overlaps a writer. Go's concurrent map read and write detection invokes runtime.throw, which the net/http connection recovery cannot catch, terminating the controller process and causing a timing-dependent, cross-tenant control-plane denial of service until Kubernetes restarts the pod. This issue is fixed in versions 1.7.4 and 1.8.1. |
| Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, an HTTPRoute can use an extension-managed custom backendRef to reference a backend resource in another namespace without a matching Gateway API ReferenceGrant in the target namespace. The custom-backend branch in internal/gatewayapi/route.go omits validateBackendNamespace, allowing the route-owning namespace to bind to and use the resource without the backend namespace owner's consent and violating the Gateway API cross-namespace authorization model. This issue is fixed in versions 1.7.4 and 1.8.1. |
| The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.37.0 until 1.37.5 and 1.38.3, the HTTP OAuth2 filter (envoy.filters.http.oauth2) can leave an in-flight async token exchange attached to a downstream stream that has already been torn down. A late AsyncClient completion can still invoke OAuth2Filter methods that use StreamDecoderFilterCallbacks after that object’s lifetime has ended, causing undefined behavior, worker crashes (availability loss), and use-after-free / invalid-vptr failures under AddressSanitizer. This is a memory-safety / lifetime issue in the data plane, not a trivial config bug. Remote code execution is not claimed here; the primary demonstrated impact is DoS via crash and UB; any further impact would be deployment- and allocator-dependent. This vulnerability is fixed in 1.37.5 and 1.38.3. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.35.11, 1.36.7, 1.37.3, and 1.38.1, the OAuth2 HTTP filter's encrypt()/decrypt() functions use AES-256-CBC without an authentication tag (no HMAC, no AEAD). The /callback endpoint returns HTTP 302 on successful decryption and HTTP 401 on padding failure, creating a padding oracle. An attacker who obtains the encrypted CodeVerifier cookie can recover the plaintext PKCE code_verifier in ~6,200 requests (~100 seconds), then exchange it with a stolen authorization code to obtain the victim's access token. This vulnerability is fixed in 1.35.11, 1.36.7, 1.37.3, and 1.38.1. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.35.11, 1.36.7, 1.37.3, and 1.38.1, Envoy can translate a downstream HTTP/3 request that is complete at the transport layer (HEADERS with FIN / headers-only close) but still carries a nonzero Content-Length into a complete upstream HTTP/1 request with unresolved body debt. In an HTTP/1 upstream deployment where the origin replies before reading the declared body and keeps the connection reusable, the beginning of the next Envoy-generated upstream request can be consumed as the first request's body. The remaining bytes are then parsed by the origin as a new HTTP/1 request. This was reproduced as a route-bypass/desync: direct /pwn was denied by Envoy, but the second downstream H3 stream received the response for backend-parsed GET /pwn HTTP/1.1. This vulnerability is fixed in 1.35.11, 1.36.7, 1.37.3, and 1.38.1. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.35.11, 1.36.7, 1.37.3, and 1.38.1, destructor of JSON Object results in stack overflow when deeply O(100K) nested objects are present. This vulnerability is fixed in 1.35.11, 1.36.7, 1.37.3, and 1.38.1. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.26.0 until 1.35.13, 1.36.9, 1.37.5, and 1.38.3, the envoy.filters.http.grpc_stats filter crashes (null pointer dereference / segfault) when a Connect protocol request (Content-Type: application/connect+proto or application/connect+json) hits a direct_response route. A single unauthenticated HTTP request crashes the Envoy process. This vulnerability is fixed in 1.35.13, 1.36.9, 1.37.5, and 1.38.3. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.37.0 until 1.37.5 and 1.38.3, when the %REQUESTED_SERVER_NAME(X:Y)% is used in log format and host related options is specified, like HOST_FIRST, SNI_FIRST, it's possible to crash Envoy when the specified host header is missing in the request headers. This vulnerability is fixed in 1.37.5 and 1.38.3. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.36.0 until 1.36.9, 1.37.5, and 1.38.3, a Use-After-Free (UAF) vulnerability leading to a sudden segmentation fault exists in Envoy's ext_authz HTTP filter when processing per-route authorization overrides concurrently with rapid downstream client disconnects. During standard request lifecycles, Envoy instantiates the ext_authz filter with a foundational authorization client object (client_). If a matched route dictates a dynamic per-route HTTP or gRPC authorization service override, the filter generates a localized client. In the vulnerable implementation, this transient client aggressively overwrote the default client_ unique pointer by executing client_ = std::move(per_route_client). When a client rapidly establishes and subsequently tears down a stream (such as rapidly refreshing a protected WebSocket endpoint), the downstream triggers the ConnectionManagerImpl::doDeferredStreamDestroy() -> ActiveStream::onResetStream() lifecycle. Envoy immediately sequences Filter::onDestroy() in an attempt to securely abort dispatched asynchronous authorization check transactions via client_->cancel(). By destructing the default client abruptly during initiateCall, a memory lifecycle misalignment occurs within the async client manager. The stream teardown fails to reliably track and cancel the dynamically bound asynchronous authorization tasks, orchestrating a sequence where a late asynchronous callback from the network evaluates against a heavily destroyed ActiveStream validation span, generating a UAF process crash. This vulnerability is fixed in 1.36.9, 1.37.5, and 1.38.3. |
