| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv()
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: check contexts->nr before accessing contexts_arr[0]
Multiple sysfs command paths dereference contexts_arr[0] without first
verifying that kdamond->contexts->nr == 1. A user can set nr_contexts to
0 via sysfs while DAMON is running, causing NULL pointer dereferences.
In more detail, the issue can be triggered by privileged users like
below.
First, start DAMON and make contexts directory empty
(kdamond->contexts->nr == 0).
# damo start
# cd /sys/kernel/mm/damon/admin/kdamonds/0
# echo 0 > contexts/nr_contexts
Then, each of below commands will cause the NULL pointer dereference.
# echo update_schemes_stats > state
# echo update_schemes_tried_regions > state
# echo update_schemes_tried_bytes > state
# echo update_schemes_effective_quotas > state
# echo update_tuned_intervals > state
Guard all commands (except OFF) at the entry point of
damon_sysfs_handle_cmd(). |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio
Replace BUG_ON() with proper error handling when inline data size
exceeds PAGE_SIZE. This prevents kernel panic and allows the system to
continue running while properly reporting the filesystem corruption.
The error is logged via ext4_error_inode(), the buffer head is released
to prevent memory leak, and -EFSCORRUPTED is returned to indicate
filesystem corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: Do not allow userspace to trivially triger kernel warnings
Userspace can either deliberately pass in the too small num_fences, or the
required number can legitimately grow between the two calls to the userq
wait ioctl. In both cases we do not want the emit the kernel warning
backtrace since nothing is wrong with the kernel and userspace will simply
get an errno reported back. So lets simply drop the WARN_ONs.
(cherry picked from commit 2c333ea579de6cc20ea7bc50e9595ef72863e65c) |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid resizing to a partial cluster size
This patch avoids an attempt to resize the filesystem to an
unaligned cluster boundary. An online resize to a size that is not
integral to cluster size results in the last iteration attempting to
grow the fs by a negative amount, which trips a BUG_ON and leaves the fs
with a corrupted in-memory superblock. |
| stable-diffusion.cpp is a pure C/C++ library for running diffusion model (Stable Diffusion, Flux, Wan, Qwen Image, Z-Image, and more) inference. From master-742-1a13107 until master-763-4fcc6fe, IMatrixCollector::load_imatrix in src/runtime/imatrix.cpp reuses the values and counts vectors for entries with the same tensor name but resizes them only when they are empty. An untrusted .imatrix file can provide a small nval for the first entry and a larger nval for a second entry with the same name, causing the accumulation loop to write attacker-controlled floating-point and integer values beyond both heap buffers. Loading the file through the --imat-in conversion path can corrupt the heap or crash the process before a model is required. This issue is fixed in master-763-4fcc6fe. |
| A flaw was found in luksmeta. A local attacker with administrative privileges can cause data corruption when saving metadata to a Linux Unified Key Setup (LUKS) device. Due to incorrect boundary calculations and flawed overlap detection, new metadata entries can be written beyond available free space or over existing records. This issue can corrupt stored encrypted payload data or existing metadata, potentially rendering the affected data inaccessible. |
| A data corruption vulnerability has been identified in the luksmeta utility when used with the LUKS1 disk encryption format. An attacker with the necessary permissions can exploit this flaw by writing a large amount of metadata to an encrypted device. The utility fails to correctly validate the available space, causing the metadata to overwrite and corrupt the user's encrypted data. This action leads to a permanent loss of the stored information. Devices using the LUKS formats other than LUKS1 are not affected by this issue. |
| The GetPaid plugin for WordPress before 2.8.63 contains an improper input validation vulnerability that allows unauthenticated attackers to bypass payment processing by submitting a negative item quantity on a public payment form. Attackers can exploit the unchecked quantity value in process_item() to produce a negative line subtotal that reduces the invoice total to zero, causing process_free_payment() to mark the invoice as paid without any actual gateway charge. |
| A stack-based buffer overflow vulnerability in Fireware OS's WireGuard configuration processing allows a remote attacker that has man-in-the-middle TLS-decrypted access between the Firebox and WatchGuard Cloud to create a Denial of Service condition and potentially execute arbitrary code by tampering with a FireCloud Gateway configuration payload. |
| vLLM from 0.22.0 before 0.24.0 contains an improper input validation vulnerability in the Rust gRPC converter that allows remote attackers to bypass max_logprobs limits via CandidateTokens.top_n. Attackers can send Generate or GenerateStream requests with oversized or integer-wrapping top_n values to trigger torch.topk failures that terminate EngineCore. |
| Mounting an attacker-controlled NAND flash image (`lx_nand_flash_open()`) triggers an unbounded out-of-bounds heap **write** in LevelX's NAND flash-translation-layer metadata parser that overwrites a driver function pointer in the control block, giving a demonstrated control-flow hijack — RIP set to a full 8-byte attacker-chosen value (register-verified). Two accompanying OOB reads. All reproduced verbatim under ASan at HEAD `9f1cfdc`. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the Module Manager loaders take a module image without its length and trust the sizes and offsets in its preamble. A crafted module image can declare a code size larger than the image to read, or gain access to, the memory that follows it, and can place its entry points outside its code. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.21.3, pypdf can consume excessive time and memory when an application accesses the page count of a crafted encrypted PDF whose page tree declares a forged /Count value. Even after successful decryption, page-count retrieval trusts the unvalidated declared count instead of walking the page tree, allowing the attacker-controlled value to drive excessive work and memory use. This issue is fixed in version 6.21.3. |
| OpenWrt Project is a Linux operating system targeting embedded devices. In versions prior to 24.10.6 and 25.12.1, the mdns daemon has a Stack-based Buffer Overflow vulnerability in the match_ipv6_addresses function, triggered when processing PTR queries for IPv6 reverse DNS domains (.ip6.arpa) received via multicast DNS on UDP port 5353. During processing, the domain name from name_buffer is copied via strcpy into a fixed 256-byte stack buffer, and then the reverse IPv6 request is extracted into a buffer of only 46 bytes (INET6_ADDRSTRLEN). Because the length of the data is never validated before this extraction, an attacker can supply input larger than 46 bytes, causing an out-of-bounds write. This allows a specially crafted DNS query to overflow the stack buffer in match_ipv6_addresses, potentially enabling remote code execution. This issue has been fixed in versions 24.10.6 and 25.12.1. |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, node-forge accepted a PKCS#12 MAC or PKCS#12 password-based encryption iteration count of zero or less. pki.pbe.generatePkcs12Key() then returned a constant key independent of the password and salt, allowing crafted PKCS#12 input processed by forge.pkcs12.pkcs12FromAsn1() to bypass password-based integrity checks. Predictable encryption keys and IVs also affected PKCS#12 PBE using pbeWithSHAAnd3-KeyTripleDES-CBC or pbewithSHAAnd40BitRC2-CBC, including shrouded key bags, encrypted SafeContents, and PKCS#8 ENCRYPTED PRIVATE KEY input processed independently by forge.pki.decryptPrivateKeyInfo(). PBES2/PBKDF2-encrypted content is unaffected. This issue is fixed in version 1.4.1. |
| An issue in Systrome Validation & Certification 1.0 allows an attacker to cause a denial of service via the t URL parameter in the qrcode_auth.html component |
| go-git is an extensible git implementation library written in pure Go. Prior to version 5.17.1, go-git’s index decoder for format version 4 fails to validate the path name prefix length before applying it to the previously decoded path name. A maliciously crafted index file can trigger an out-of-bounds slice operation, resulting in a runtime panic during normal index parsing. This issue only affects Git index format version 4. Earlier formats (go-git supports only v2 and v3) are not vulnerable to this issue. This issue has been patched in version 5.17.1. |
| In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01775984; Issue ID: MSV-8907. |
| If BIND encounters a particular invalid data structure in a DNS record, it will accept the invalid data, and may subsequently abort and exit.
BIND will first need to store a DNS record for a key (KEY, DNSKEY, etc.). That key must specify a PRIVATEDNS algorithm (253), and in the algorithm identifier, improperly give a length longer than the actual identifier data. The invalid identifier will be stored. If BIND later needs to render that record to text, it will use the invalid length during processing, leading to a consistency check failing.
This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1. |
