Export limit exceeded: 36450 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (296 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98825 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rtc: mpfs: fix unchecked devm_clk_get() error pointer in probe() devm_clk_get(&pdev->dev, "rtcref")'s return value was passed straight into clk_get_rate() without checking it for an error first, unlike the "rtc" clock a few lines above which is correctly checked with IS_ERR(). clk_get_rate() only guards against a NULL clk, not an error pointer: if (!clk) return 0; ... rate = clk_core_get_rate_recalc(clk->core); so if devm_clk_get() ever returns an error pointer here (for example ERR_PTR(-EPROBE_DEFER), which is the normal, expected outcome if the clkcfg clock-provider this RTC depends on has not registered its clocks yet by the time this driver probes), clk_get_rate() dereferences that error pointer instead of returning 0, crashing instead of letting probe defer. Capture the clock in the existing 'clk' local and check it with IS_ERR() before calling clk_get_rate(), matching the handling already used for the "rtc" clock in this same function. | ||||
| CVE-2026-97512 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-qcom-qspi: Fix incomplete error handling in runtime PM The runtime PM functions had incomplete error handling that could leave the system in an inconsistent state. If any operation failed midway through suspend or resume, some resources would be left in the wrong state while others were already changed, leading to potential clock/power imbalances. Reorder the suspend/resume sequences to avoid brownout risk by ensuring the performance state is set appropriately before clocks are enabled and clocks are disabled before dropping the performance state. Fix by adding proper error checking for all operations and using goto-based cleanup to ensure all successfully acquired resources are properly released on any error. | ||||
| CVE-2026-90263 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: check if root is readonly when setting posix acl For a filesystem which has btrfs read-only property set to true, all write operations including acl and xattr should be denied. However, acl can still be set even if btrfs ro property is true. This happens because no function on the set_acl code path checks the root is readonly or not. It was checked in btrfs_setxattr_trans() but got removed in commit 353c2ea735e4 ("btrfs: remove redundant readonly root check in btrfs_setxattr_trans") That commit didn't check if all the callers properly check the root's read-only flag. A previous fix is commit b51111271b03 ("btrfs: check if root is readonly while setting security xattr"). Always check if the root is read-only before performing the set acl operation. | ||||
| CVE-2026-89693 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: check nfsd4_acl_to_attr() return value in nfsd4_create() nfsd4_create() stores the return value of nfsd4_acl_to_attr() in status, but the switch(create->cr_type) block unconditionally overwrites it in every branch. ACL translation errors are silently discarded, and the CREATE proceeds without the requested ACL. Add an early exit check after nfsd4_acl_to_attr(), matching the pattern already used in nfsd4_setattr(). [ cel: prefer NFS4ERR_BADTYPE over NFS4ERR_ATTRNOTSUPP ] | ||||
| CVE-2026-74308 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix kernel BUG in ext4_write_inline_data_end When the data=journal mount option is used, the ext4_journalled_write_end() function incorrectly calls ext4_write_inline_data_end() without checking if the EXT4_STATE_MAY_INLINE_DATA flag is still set on the inode. If a previous attempt to convert the inline data to an extent failed (e.g. due to ENOSPC), the EXT4_STATE_MAY_INLINE_DATA flag is cleared, but the EXT4_INODE_INLINE_DATA flag remains set. In this scenario, the next call to ext4_write_begin() will not prepare the inline data xattr for writing, but ext4_journalled_write_end() will incorrectly attempt to write to it, triggering a BUG_ON(pos + len > EXT4_I(inode)->i_inline_size) in ext4_write_inline_data() since i_inline_size was not expanded. Fix this by ensuring that ext4_journalled_write_end() only calls ext4_write_inline_data_end() if the EXT4_STATE_MAY_INLINE_DATA flag is set, mirroring the behavior of ext4_write_end() and ext4_da_write_end(). | ||||
| CVE-2024-46775 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Validate function returns [WHAT & HOW] Function return values must be checked before data can be used in subsequent functions. This fixes 4 CHECKED_RETURN issues reported by Coverity. | ||||
| CVE-2026-99210 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-29 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: clear rdev on device init failure rocket_probe() stores the return value from rocket_device_init() in the file-scoped rdev pointer before checking whether it is an error pointer. If rocket_device_init() fails, rdev is left as an ERR_PTR. The rdev pointer is also used as the marker for whether the shared rocket device has already been initialized. A later core probe can therefore see a non-NULL rdev, skip rocket_device_init(), and dereference the error pointer when reading rdev->num_cores. Save the error code and clear rdev before returning from the rocket_device_init() failure path. | ||||
| CVE-2026-98114 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: propagate DACL parsing errors parse_dacl() silently accepts truncated ACEs and allocation failures, allowing set_info_sec() to continue with an incomplete ACL conversion. Return parsing and allocation errors to parse_sec_desc() so malformed security descriptors are rejected before inode attributes or ACL xattrs are updated. | ||||
| CVE-2026-98141 | 1 Linux | 1 Linux Kernel | 2026-10-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: propagate reparse index insertion failure update_reparse_data() ignores the return value of set_reparse_index(). When index insertion fails, the code removes the just-written reparse data as cleanup but still returns 0, so symlink(2) (and WSL special file creation) reports success while no reparse data exists on disk. When there was no previous reparse data (oldsize == 0), the failure was likewise silently ignored. Propagate the error to the caller. | ||||
| CVE-2026-77207 | 1 Libreswan | 1 Libreswan | 2026-10-26 | 7.5 High |
| Libreswan has a null pointer dereference bug in the PKCS#7 handling code for IKE certificate authentication. When libreswan decodes an IKE CERT payload of type CERT_PKCS7_WRAPPED_X509, it guards the PKCS#7 blob with SEC_PKCS7ContainsCertsOrCrls() and then iterates the certificate list with SEC_PKCS7GetCertificateList(). The two NSS APIs disagree on a SignedData that carries a CRL but no certificates: ContainsCertsOrCrls() returns PR_TRUE (there is a CRL), so the guard passes, but GetCertificateList() returns NULL (there are no certificates). This causes libreswan to dereference a null pointer leading to a crash and restart. A malicious IKE_AUTH packet can trigger this bug, meaning the peer does not need to be authenticated. No remote code execution is possible. Continued exploitation can cause a denial of service. | ||||
| CVE-2026-63864 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Propagate error from visit_tailcall_insn Commit e40f5a6bf88a ("bpf: correct stack liveness for tail calls") added visit_tailcall_insn() but did not check its return value. | ||||
| CVE-2026-90648 | 1 Webassembly | 1 Wabt | 2026-10-23 | N/A |
| wasm2c in WebAssembly wabt through 1.0.41 allows sandbox escape in some situations that primarily involve 32-bit platforms, aka a "table flip" attack. It does not check the return value of calloc() in wasm_rt_allocate_funcref_table() (wasm2c/wasm-rt-impl-tableops.inc). When the funcref table allocation fails, table->data is left NULL while table->size keeps the guest-declared element count; thus, bounds checks still pass and table element accesses resolve to absolute memory addresses (i * sizeof(wasm_rt_funcref_t)). This gives arbitrary read and write of host process memory and - via table.get, table.set, and call_indirect - arbitrary code execution, defeating the isolation that wasm2c exists to provide (a full sandbox escape). wasm2c is used as an in-process sandboxing boundary by RLBox and WasmBoxC, including in Firefox, which compiles the Graphite, Hunspell, Ogg, Expat, and Woff2 libraries via wasm2c to contain untrusted font, media, and XML input. Therefore, sandboxing in these applications is potentially affected. Exploitation requires the funcref table allocation to fail, for example under an address-space limit (RLIMIT_AS), on 32-bit hosts, with vm.overcommit_memory=2, or under memory pressure. On 64-bit Linux with default overcommit the allocation succeeds and the defect is not triggered. The wasm2c memory allocator aborts on calloc failure in the same runtime; the table allocator lacks this abort behavior. This was introduced in commit ab9e0b55 (PR #813). | ||||
| CVE-2026-98783 | 1 Linux | 1 Linux Kernel | 2026-10-23 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Add missing IS_ERR check for ovl_adaptor platform device platform_device_register_data() can fail and return an ERR_PTR, but the return value is used without checking, leading to an invalid pointer being stored in ddp_comp[].dev and passed to component_match_add() and mtk_ddp_comp_init(), which could result in a kernel crash. Add an IS_ERR() check to jump to the error handling path on failure. | ||||
| CVE-2026-48503 | 1 Mz-automation | 1 Libiec61850 | 2026-10-23 | 7.5 High |
| libIEC61850 is an open-source implementation of IEC 61850 client and server protocols including MMS, GOOSE, Sampled Values, and R-Session. Prior to 1.6.2, the MMS file service in src/mms/iso_mms/server/mms_file_service.c accepts an out-of-range initialPosition in fileOpen and stores it in the file-read state. The fileRead path then subtracts the larger read position from the file size using unsigned arithmetic and fails to limit the response to the actual FileSystem_readFile return value. The oversized response can include stale bytes from the reused connection buffer after the requested file contents, disclosing prior response data and protocol fragments to an unauthenticated remote client when the file service is enabled. This issue is fixed in version 1.6.2. | ||||
| CVE-2026-48741 | 1 Mz-automation | 1 Libiec61850 | 2026-10-23 | 7.5 High |
| libIEC61850 is an open-source implementation of IEC 61850 client and server protocols including MMS, GOOSE, Sampled Values, and R-Session. Prior to 1.6.2, alternateArrayAccess in src/mms/iso_mms/server/mms_read_service.c does not validate an alternate-access sub-array range when numberOfElements is greater than zero. An out-of-range MmsValue_getElement call returns NULL, and the sub-array branch passes that value to MmsValue_isDeletable, causing a NULL pointer dereference. A remote MMS Read request can therefore crash servers whose data models contain arrays, while the single-element error path handles the same invalid index safely. This issue is fixed in version 1.6.2. | ||||
| CVE-2026-98661 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: rohm-bu27034: Fix infinite delay on error When reading an integration-time fails, the code will use error code to compute the sleep time. Fix this by using the smallest integration time as a default if reading fails. | ||||
| CVE-2026-110353 | 1 Haproxy | 4 Haproxy, Haproxy Enterprise, Kubernetes Ingress Controller and 1 more | 2026-10-22 | 7.5 High |
| HAProxy 3.2 before 3.4.6 allows a remote unauthenticated attacker to cause a denial of service (worker-thread CPU exhaustion) via a truncated HTTP/2 PING frame. h2c_handle_ping in src/mux_h2.c does not check for a short read, unlike the other H2 frame handlers. Because the incomplete frame cannot be processed, its data is never consumed, and the H2 multiplexer tasklet is repeatedly woken by that pending data without making progress. The CPU spins until timeout http-request closes the connection, and an attacker opening many such connections can sustain high CPU usage. | ||||
| CVE-2024-42068 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Take return from set_memory_ro() into account with bpf_prog_lock_ro() set_memory_ro() can fail, leaving memory unprotected. Check its return and take it into account as an error. | ||||
| CVE-2024-42067 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Take return from set_memory_rox() into account with bpf_jit_binary_lock_ro() set_memory_rox() can fail, leaving memory unprotected. Check return and bail out when bpf_jit_binary_lock_ro() returns an error. | ||||
| CVE-2026-43139 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.6 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm6: fix uninitialized saddr in xfrm6_get_saddr() xfrm6_get_saddr() does not check the return value of ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable source address (returns -EADDRNOTAVAIL), saddr->in6 is left uninitialized, but xfrm6_get_saddr() still returns 0 (success). This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized address in xfrm_state_find(), triggering KMSAN warning: ===================================================== BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940 xfrm_state_find+0x2424/0xa940 xfrm_resolve_and_create_bundle+0x906/0x5a20 xfrm_lookup_with_ifid+0xcc0/0x3770 xfrm_lookup_route+0x63/0x2b0 ip_route_output_flow+0x1ce/0x270 udp_sendmsg+0x2ce1/0x3400 inet_sendmsg+0x1ef/0x2a0 __sock_sendmsg+0x278/0x3d0 __sys_sendto+0x593/0x720 __x64_sys_sendto+0x130/0x200 x64_sys_call+0x332b/0x3e70 do_syscall_64+0xd3/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable tmp.i.i created at: xfrm_resolve_and_create_bundle+0x3e3/0x5a20 xfrm_lookup_with_ifid+0xcc0/0x3770 ===================================================== Fix by checking the return value of ipv6_dev_get_saddr() and propagating the error. | ||||