| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix AMDGPU_INFO_READ_MMR_REG
There were multiple issues in that code.
First of all the order between the reset semaphore and the mm_lock was
wrong (e.g. copy_to_user) was called while holding the lock.
Then we allocated memory while holding the reset semaphore which is also
a pretty big bug and can deadlock.
Then we used down_read_trylock() instead of waiting for the reset to
finish.
(cherry picked from commit 361b6e6b303d4b691f6c5974d3eaab67ca6dd90e) |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/64s: Fix unmap race with PMD migration entries
The following race is possible with migration swap entries or
device-private THP entries. e.g. when move_pages is called on a PMD THP
page, then there maybe an intermediate state, where PMD entry acts as
a migration swap entry (pmd_present() is true). Then if an munmap
happens at the same time, then this VM_BUG_ON() can happen in
pmdp_huge_get_and_clear_full().
This patch fixes that.
Thread A: move_pages() syscall
add_folio_for_migration()
mmap_read_lock(mm)
folio_isolate_lru(folio)
mmap_read_unlock(mm)
do_move_pages_to_node()
migrate_pages()
try_to_migrate_one()
spin_lock(ptl)
set_pmd_migration_entry()
pmdp_invalidate() # PMD: _PAGE_INVALID | _PAGE_PTE | pfn
set_pmd_at() # PMD: migration swap entry (pmd_present=0)
spin_unlock(ptl)
[page copy phase] # <--- RACE WINDOW -->
Thread B: munmap()
mmap_write_downgrade(mm)
unmap_vmas() -> zap_pmd_range()
zap_huge_pmd()
__pmd_trans_huge_lock()
pmd_is_huge(): # !pmd_present && !pmd_none -> TRUE (swap entry)
pmd_lock() -> # spin_lock(ptl), waits for Thread A to release ptl
pmdp_huge_get_and_clear_full()
VM_BUG_ON(!pmd_present(*pmdp)) # HITS!
[ 287.738700][ T1867] ------------[ cut here ]------------
[ 287.743843][ T1867] kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:187!
cpu 0x0: Vector: 700 (Program Check) at [c00000044037f4f0]
pc: c000000000094ca4: pmdp_huge_get_and_clear_full+0x6c/0x23c
lr: c000000000645dec: zap_huge_pmd+0xb0/0x868
sp: c00000044037f790
msr: 800000000282b033
current = 0xc0000004032c1a00
paca = 0xc000000004fe0000 irqmask: 0x03 irq_happened: 0x09
pid = 1867, comm = a.out
kernel BUG at :187!
Linux version 6.19.0-12136-g14360d4f917c-dirty (powerpc64le-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #27 SMP PREEMPT Sun Feb 22 10:38:56 IST 2026
enter ? for help
[link register ] c000000000645dec zap_huge_pmd+0xb0/0x868
[c00000044037f790] c00000044037f7d0 (unreliable)
[c00000044037f7d0] c000000000645dcc zap_huge_pmd+0x90/0x868
[c00000044037f840] c0000000005724cc unmap_page_range+0x176c/0x1f40
[c00000044037fa00] c000000000572ea0 unmap_vmas+0xb0/0x1d8
[c00000044037fa90] c0000000005af254 unmap_region+0xb4/0x128
[c00000044037fb50] c0000000005af400 vms_complete_munmap_vmas+0x138/0x310
[c00000044037fbe0] c0000000005b0f1c do_vmi_align_munmap+0x1ec/0x238
[c00000044037fd30] c0000000005b3688 __vm_munmap+0x170/0x1f8
[c00000044037fdf0] c000000000587f74 sys_munmap+0x2c/0x40
[c00000044037fe10] c000000000032668 system_call_exception+0x128/0x350
[c00000044037fe50] c00000000000d05c system_call_vectored_common+0x15c/0x2ec
---- Exception: 3000 (System Call Vectored) at 0000000010064a2c
SP (7fff9b1ee9c0) is in userspace
0:mon> zh
commit a30b48bf1b24 ("mm/migrate_device: implement THP migration of zone device pages"),
enabled migration for device-private PMD entries. Hence this is one
other path where this warning could get trigger from.
------------[ cut here ]------------
WARNING: arch/powerpc/mm/book3s64/hash_pgtable.c:199 at hash__pmd_hugepage_update+0x48/0x284, CPU#3: hmm-tests/1905
Modules linked in: test_hmm
CPU: 3 UID: 0 PID: 1905 Comm: hmm-tests Tainted: G B W L N 7.0.0-rc1-01438-g7e2f0ee7581c #21 PREEMPT
Tainted: [B]=BAD_PAGE, [W]=WARN, [L]=SOFTLOCKUP, [N]=TEST
Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries
NIP [c000000000096b70] hash__pmd_hugepage_update+0x48/0x284
LR [c000000000096e7c] hash__pmdp_huge_get_and_clear+0xd0/0xd4
Call Trace:
[c000000604707670] [c000000004e102b8] 0xc000000004e102b8 (unreliable)
[c000000604707700] [c00000000064ec3c] set_pmd_migration_entry+0x414/0x498
[c000000604707760] [c00000000063e5a4] migrate_vma_col
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: return VMA snapshot from task_vma iterator
Holding the per-VMA lock across the BPF program body creates a lock
ordering problem when helpers acquire locks that depend on mmap_lock:
vm_lock -> i_rwsem -> mmap_lock -> vm_lock
Snapshot the VMA under the per-VMA lock in _next() via memcpy(), then
drop the lock before returning. The BPF program accesses only the
snapshot.
The verifier only trusts vm_mm and vm_file pointers (see
BTF_TYPE_SAFE_TRUSTED_OR_NULL in verifier.c). vm_file is reference-
counted with get_file() under the lock and released via fput() on the
next iteration or in _destroy(). vm_mm is already correct because
lock_vma_under_rcu() verifies vma->vm_mm == mm. All other pointers
are left as-is by memcpy() since the verifier treats them as untrusted. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix race condition in TX timestamp ring cleanup
Fix a race condition between ice_free_tx_tstamp_ring() and ice_tx_map()
that can cause a NULL pointer dereference.
ice_free_tx_tstamp_ring currently clears the ICE_TX_FLAGS_TXTIME flag
after NULLing the tstamp_ring. This could allow a concurrent ice_tx_map
call on another CPU to dereference the tstamp_ring, which could lead to
a NULL pointer dereference.
CPU A:ice_free_tx_tstamp_ring() | CPU B:ice_tx_map()
--------------------------------|---------------------------------
tx_ring->tstamp_ring = NULL |
| ice_is_txtime_cfg() -> true
| tstamp_ring = tx_ring->tstamp_ring
| tstamp_ring->count // NULL deref!
flags &= ~ICE_TX_FLAGS_TXTIME |
Fix by:
1. Reordering ice_free_tx_tstamp_ring() to clear the flag before
NULLing the pointer, with smp_wmb() to ensure proper ordering.
2. Adding smp_rmb() in ice_tx_map() after the flag check to order the
flag read before the pointer read, using READ_ONCE() for the
pointer, and adding a NULL check as a safety net.
3. Converting tx_ring->flags from u8 to DECLARE_BITMAP() and using
atomic bitops (set_bit(), clear_bit(), test_bit()) for all flag
operations throughout the driver:
- ICE_TX_RING_FLAGS_XDP
- ICE_TX_RING_FLAGS_VLAN_L2TAG1
- ICE_TX_RING_FLAGS_VLAN_L2TAG2
- ICE_TX_RING_FLAGS_TXTIME |
| In the Linux kernel, the following vulnerability has been resolved:
pseries/papr-hvpipe: Fix race with interrupt handler
While executing ->ioctl handler or ->release handler, if an interrupt
fires on the same cpu, then we can enter into a deadlock.
This patch fixes both these handlers to take spin_lock_irq{save|restore}
versions of the lock to prevent this deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix deferred split queue races during migration
migrate_folio_move() records the deferred split queue state from src and
replays it on dst. Replaying it after remove_migration_ptes(src, dst, 0)
makes dst visible before it is requeued, so a concurrent rmap-removal path
can mark dst partially mapped and trip the WARN in deferred_split_folio().
Move the requeue before remove_migration_ptes() so dst is back on the
deferred split queue before it becomes visible again.
Because migration still holds dst locked at that point, teach
deferred_split_scan() to requeue a folio when folio_trylock() fails.
Otherwise a fully mapped underused folio can be dequeued by the shrinker
and silently lost from split_queue.
[ziy@nvidia.com: move the comment] |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: search every core slot when looking up a scheduler
sched_to_core() walks rdev->cores[] up to rdev->num_cores, and
rocket_remove() decrements num_cores for every core it removes. Unbind a
core that is not the last one and the cores behind it fall outside the
search, so sched_to_core() returns NULL for a core that is still bound and
still running jobs. Neither caller checks the result:
rocket_job_run(): rocket_fence_create(core), core->dev
rocket_job_timedout(): dev_err(core->dev, "NPU job timed out")
Unbinding the middle core of the three on an RK3588 while three clients are
submitting to all of them faults twice, once from the surviving core's
job queue and once from its reset work:
KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227]
Workqueue: fdad0000.npu drm_sched_run_job_work [gpu_sched]
pc : rocket_job_run+0x234/0x838 [rocket]
Call trace:
rocket_job_run+0x234/0x838 [rocket]
drm_sched_run_job_work+0x2cc/0xad8 [gpu_sched]
process_one_work+0x640/0x14f0
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: rocket-reset-2 drm_sched_job_timedout [gpu_sched]
pc : rocket_job_timedout+0xf0/0x1e0 [rocket]
Call trace:
rocket_job_timedout+0xf0/0x1e0 [rocket]
drm_sched_job_timedout+0x188/0x6a0 [gpu_sched]
Both are the third core: the workqueue names are its device and its
core->index, and it was left at slot 2 while num_cores had dropped to 2.
Search all the slots that were allocated, the way find_core_for_dev() now
does. A core that is still bound is then found, and the two callers get
the pointer they already assume they have.
This does not make unbinding one core out of several safe. An open client
keeps an entity pointing at the scheduler of the core that went away:
drm_sched reports it as not ready for every job that lands on it, and the
client waits in dma_fence_default_wait for a fence that will never signal.
Stopping the NULL dereference is what belongs in a fix; the rest wants
more thought. |
| A flaw was found in the authentication session handling of the keycloak-services component in Keycloak. The issue occurs because the system fails to verify if an authenticator is valid for the current authentication flow when switching between the standard authentication path and the reset credentials path. An authenticated attacker can exploit this by triggering a race condition during the credential reset process to associate their successful authentication state with another user's session. This can result in the attacker gaining full access to the victim's account and changing their password. |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: core - use RCU and work_struct to fix race condition
Currently, hwrng_fill is not cleared until the hwrng_fillfn() thread
exits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutex
lock, a concurrent hwrng_unregister() may call kthread_stop() again on
the same task.
Additionally, if hwrng_unregister() is called immediately after
hwrng_register(), the stopped thread may have never been executed. Thus,
hwrng_fill remains dirty even after hwrng_unregister() returns. In this
case, subsequent calls to hwrng_register() will fail to start new
threads, and hwrng_unregister() will call kthread_stop() on the same
freed task. In both cases, a use-after-free occurs:
refcount_t: addition on 0; use-after-free.
WARNING: ... at lib/refcount.c:25 refcount_warn_saturate+0xec/0x1c0
Call Trace:
kthread_stop+0x181/0x360
hwrng_unregister+0x288/0x380
virtrng_remove+0xe3/0x200
This patch fixes the race by protecting the global hwrng_fill pointer
inside the rng_mutex lock, so that hwrng_fillfn() thread is stopped only
once, and calls to kthread_run() and kthread_stop() are serialized
with the lock held.
To avoid deadlock in hwrng_fillfn() while being stopped with the lock
held, we convert current_rng to RCU, so that get_current_rng() can read
current_rng without holding the lock. To remove the lock from put_rng(),
we also delay the actual cleanup into a work_struct.
Since get_current_rng() no longer returns ERR_PTR values, the IS_ERR()
checks are removed from its callers.
With hwrng_fill protected by the rng_mutex lock, hwrng_fillfn() can no
longer clear hwrng_fill itself. Therefore, if hwrng_fillfn() returns
directly after current_rng is dropped, kthread_stop() would be called on
a freed task_struct later. To fix this, hwrng_fillfn() calls schedule()
now to keep the task alive until being stopped. The kthread_stop() call
is also moved from hwrng_unregister() to drop_current_rng(), ensuring
kthread_stop() is called on all possible paths where current_rng becomes
NULL, so that the thread would not wait forever. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: fix ip_rt_bug race in icmp_route_lookup reverse path
icmp_route_lookup() performs multiple route lookups to find a suitable
route for sending ICMP error messages, with special handling for XFRM
(IPsec) policies.
The lookup sequence is:
1. First, lookup output route for ICMP reply (dst = original src)
2. Pass through xfrm_lookup() for policy check
3. If blocked (-EPERM) or dst is not local, enter "reverse path"
4. In reverse path, call xfrm_decode_session_reverse() to get fl4_dec
which reverses the original packet's flow (saddr<->daddr swapped)
5. If fl4_dec.saddr is local (we are the original destination), use
__ip_route_output_key() for output route lookup
6. If fl4_dec.saddr is NOT local (we are a forwarding node), use
ip_route_input() to simulate the reverse packet's input path
7. Finally, pass rt2 through xfrm_lookup() with XFRM_LOOKUP_ICMP flag
The bug occurs in step 6: ip_route_input() is called with fl4_dec.daddr
(original packet's source) as destination. If this address becomes local
between the initial check and ip_route_input() call (e.g., due to
concurrent "ip addr add"), ip_route_input() returns a LOCAL route with
dst.output set to ip_rt_bug.
This route is then used for ICMP output, causing dst_output() to call
ip_rt_bug(), triggering a WARN_ON:
------------[ cut here ]------------
WARNING: net/ipv4/route.c:1275 at ip_rt_bug+0x21/0x30, CPU#1
Call Trace:
<TASK>
ip_push_pending_frames+0x202/0x240
icmp_push_reply+0x30d/0x430
__icmp_send+0x1149/0x24f0
ip_options_compile+0xa2/0xd0
ip_rcv_finish_core+0x829/0x1950
ip_rcv+0x2d7/0x420
__netif_receive_skb_one_core+0x185/0x1f0
netif_receive_skb+0x90/0x450
tun_get_user+0x3413/0x3fb0
tun_chr_write_iter+0xe4/0x220
...
Fix this by checking rt2->rt_type after ip_route_input(). If it's
RTN_LOCAL, the route cannot be used for output, so treat it as an error.
The reproducer requires kernel modification to widen the race window,
making it unsuitable as a selftest. It is available at:
https://gist.github.com/mrpre/eae853b72ac6a750f5d45d64ddac1e81 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: Fix race bug in nvme_poll_irqdisable()
In the following scenario, pdev can be disabled between (1) and (3) by
(2). This sets pdev->msix_enabled = 0. Then, pci_irq_vector() will
return MSI-X IRQ(>15) for (1) whereas return INTx IRQ(<=15) for (2).
This causes IRQ warning because it tries to enable INTx IRQ that has
never been disabled before.
To fix this, save IRQ number into a local variable and ensure
disable_irq() and enable_irq() operate on the same IRQ number. Even if
pci_free_irq_vectors() frees the IRQ concurrently, disable_irq() and
enable_irq() on a stale IRQ number is still valid and safe, and the
depth accounting reamins balanced.
task 1:
nvme_poll_irqdisable()
disable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(1)
enable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(3)
task 2:
nvme_reset_work()
nvme_dev_disable()
pdev->msix_enable = 0; ...(2)
crash log:
------------[ cut here ]------------
Unbalanced enable for IRQ 10
WARNING: kernel/irq/manage.c:753 at __enable_irq+0x102/0x190 kernel/irq/manage.c:753, CPU#1: kworker/1:0H/26
Modules linked in:
CPU: 1 UID: 0 PID: 26 Comm: kworker/1:0H Not tainted 6.19.0-dirty #9 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: kblockd blk_mq_timeout_work
RIP: 0010:__enable_irq+0x107/0x190 kernel/irq/manage.c:753
Code: ff df 48 89 fa 48 c1 ea 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 79 48 8d 3d 2e 7a 3f 05 41 8b 74 24 2c <67> 48 0f b9 3a e8 ef b9 21 00 5b 41 5c 5d e9 46 54 66 03 e8 e1 b9
RSP: 0018:ffffc900001bf550 EFLAGS: 00010046
RAX: 0000000000000007 RBX: 0000000000000000 RCX: ffffffffb20c0e90
RDX: 0000000000000000 RSI: 000000000000000a RDI: ffffffffb74b88f0
RBP: ffffc900001bf560 R08: ffff88800197cf00 R09: 0000000000000001
R10: 0000000000000003 R11: 0000000000000003 R12: ffff8880012a6000
R13: 1ffff92000037eae R14: 000000000000000a R15: 0000000000000293
FS: 0000000000000000(0000) GS:ffff8880b49f7000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555da4a25fa8 CR3: 00000000208e8000 CR4: 00000000000006f0
Call Trace:
<TASK>
enable_irq+0x121/0x1e0 kernel/irq/manage.c:797
nvme_poll_irqdisable+0x162/0x1c0 drivers/nvme/host/pci.c:1494
nvme_timeout+0x965/0x14b0 drivers/nvme/host/pci.c:1744
blk_mq_rq_timed_out block/blk-mq.c:1653 [inline]
blk_mq_handle_expired+0x227/0x2d0 block/blk-mq.c:1721
bt_iter+0x2fc/0x3a0 block/blk-mq-tag.c:292
__sbitmap_for_each_set include/linux/sbitmap.h:269 [inline]
sbitmap_for_each_set include/linux/sbitmap.h:290 [inline]
bt_for_each block/blk-mq-tag.c:324 [inline]
blk_mq_queue_tag_busy_iter+0x969/0x1e80 block/blk-mq-tag.c:536
blk_mq_timeout_work+0x627/0x870 block/blk-mq.c:1763
process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257
process_scheduled_works kernel/workqueue.c:3340 [inline]
worker_thread+0x65c/0xe60 kernel/workqueue.c:3421
kthread+0x41a/0x930 kernel/kthread.c:463
ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
</TASK>
irq event stamp: 74478
hardirqs last enabled at (74477): [<ffffffffb5720a9c>] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:159 [inline]
hardirqs last enabled at (74477): [<ffffffffb5720a9c>] _raw_spin_unlock_irq+0x2c/0x60 kernel/locking/spinlock.c:202
hardirqs last disabled at (74478): [<ffffffffb57207b5>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
hardirqs last disabled at (74478): [<ffffffffb57207b5>] _raw_spin_lock_irqsave+0x85/0xa0 kernel/locking/spinlock.c:162
softirqs last enabled at (74304): [<ffffffffb1e9466c>] __do_softirq kernel/softirq.c:656 [inline]
softirqs last enabled at (74304): [<ffffffffb1e9466c>] invoke_softirq kernel/softirq.c:496 [inline]
softirqs last enabled at (74304): [<ffffffffb1e9466c>] __irq_exit_rcu+0xdc/0x120
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: fix race between task migration and iteration
When a task is migrated out of a css_set, cgroup_migrate_add_task()
first moves it from cset->tasks to cset->mg_tasks via:
list_move_tail(&task->cg_list, &cset->mg_tasks);
If a css_task_iter currently has it->task_pos pointing to this task,
css_set_move_task() calls css_task_iter_skip() to keep the iterator
valid. However, since the task has already been moved to ->mg_tasks,
the iterator is advanced relative to the mg_tasks list instead of the
original tasks list. As a result, remaining tasks on cset->tasks, as
well as tasks queued on cset->mg_tasks, can be skipped by iteration.
Fix this by calling css_set_skip_task_iters() before unlinking
task->cg_list from cset->tasks. This advances all active iterators to
the next task on cset->tasks, so iteration continues correctly even
when a task is concurrently being migrated.
This race is hard to hit in practice without instrumentation, but it
can be reproduced by artificially slowing down cgroup_procs_show().
For example, on an Android device a temporary
/sys/kernel/cgroup/cgroup_test knob can be added to inject a delay
into cgroup_procs_show(), and then:
1) Spawn three long-running tasks (PIDs 101, 102, 103).
2) Create a test cgroup and move the tasks into it.
3) Enable a large delay via /sys/kernel/cgroup/cgroup_test.
4) In one shell, read cgroup.procs from the test cgroup.
5) Within the delay window, in another shell migrate PID 102 by
writing it to a different cgroup.procs file.
Under this setup, cgroup.procs can intermittently show only PID 101
while skipping PID 103. Once the migration completes, reading the
file again shows all tasks as expected.
Note that this change does not allow removing the existing
css_set_skip_task_iters() call in css_set_move_task(). The new call
in cgroup_migrate_add_task() only handles iterators that are racing
with migration while the task is still on cset->tasks. Iterators may
also start after the task has been moved to cset->mg_tasks. If we
dropped css_set_skip_task_iters() from css_set_move_task(), such
iterators could keep task_pos pointing to a migrating task, causing
css_task_iter_advance() to malfunction on the destination css_set,
up to and including crashes or infinite loops.
The race window between migration and iteration is very small, and
css_task_iter is not on a hot path. In the worst case, when an
iterator is positioned on the first thread of the migrating process,
cgroup_migrate_add_task() may have to skip multiple tasks via
css_set_skip_task_iters(). However, this only happens when migration
and iteration actually race, so the performance impact is negligible
compared to the correctness fix provided here. |
| In the Linux kernel, the following vulnerability has been resolved:
md/bitmap: fix GPF in write_page caused by resize race
A General Protection Fault occurs in write_page() during array resize:
RIP: 0010:write_page+0x22b/0x3c0 [md_mod]
This is a use-after-free race between bitmap_daemon_work() and
__bitmap_resize(). The daemon iterates over `bitmap->storage.filemap`
without locking, while the resize path frees that storage via
md_bitmap_file_unmap(). `quiesce()` does not stop the md thread,
allowing concurrent access to freed pages.
Fix by holding `mddev->bitmap_info.mutex` during the bitmap update. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: annotate data-races around hdev->req_status
__hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock:
hdev->req_status = HCI_REQ_PEND;
However, several other functions read or write hdev->req_status without
holding any lock:
- hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue)
- hci_cmd_sync_complete() reads/writes from HCI event completion
- hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write
- hci_abort_conn() reads in connection abort path
Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while
hci_send_cmd_sync() runs on hdev->workqueue, these are different
workqueues that can execute concurrently on different CPUs. The plain
C accesses constitute a data race.
Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses
to hdev->req_status to prevent potential compiler optimizations that
could affect correctness (e.g., load fusing in the wait_event
condition or store reordering). |
| The YITH WooCommerce Gift Cards WordPress plugin before 4.38.1 does not lock or atomically update a gift card's balance when it is redeemed at checkout, allowing an attacker who holds a gift card code to spend more than its funded value by submitting multiple checkouts for the same code at the same time. |
| A race condition was addressed with additional validation. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. A malicious app may be able to break out of its sandbox. |
| A race condition was addressed with improved handling of symbolic links. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to modify protected parts of the file system. |
| The Model Context Protocol TypeScript SDK provides TypeScript client and server implementations of the Model Context Protocol. From 2.0.0 until 2.3.0 in @modelcontextprotocol/server, applications that shared one stateless HTTP transport or one McpServer or Server instance among multiple clients could deliver responses and notifications to the wrong client. The affected surface is an MCP server reached over HTTP by multiple clients. The trigger is reuse of one stateless transport or server instance. Messages were associated with a connection using only the JSON-RPC request identifier. SDK clients start request identifiers at zero, so collisions occur in normal operation. Cross-client delivery exposes one client's responses and notifications to another client. The issue requires an HTTP endpoint reachable by more than one client and an application that constructs the server or transport once at startup instead of once per request or session. stdio servers and factory-created per-call servers are not affected. Upgrading causes reused instances to fail and therefore requires an application code change. This issue is fixed in @modelcontextprotocol/server 2.3.0. |
| In Jenkins 2.587 and earlier, LTS 2.580.1 and earlier, the HTTP endpoint for creating the first user account does not check whether the setup wizard has been completed, resulting in a race condition that allows unauthenticated attackers to create an administrator account while the initial user account is being replaced. |
| FastNetMon is a high-performance DDoS detector and sensor. In version 1.2.9 and earlier, FastNetMon's IPv6 top-talkers screen-draw thread in draw_table_ipv6() in src/fastnetmon_logic.cpp iterates ipv6_host_counters.average_speed_map without holding counter_map_mutex while recalculate_speed() inserts new keys and may rehash the same map. The race requires networks_list to include the targeted IPv6 range. It causes confirmed undefined behavior under load; a process crash is plausible but was not observed, so reliable denial of service has not been established. No fixed release is available as of this review. |
