| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout
Currently when calling xilinx_dma_poll_timeout with delay_us=0 and a
condition that is never fulfilled, the CPU busy-waits for prolonged time
and the timeout triggers only with a massive delay causing a CPU stall.
This happens due to a huge underestimation of wall clock time in
poll_timeout_us_atomic. Commit 7349a69cf312 ("iopoll: Do not use
timekeeping in read_poll_timeout_atomic()") changed the behavior to no
longer use ktime_get at the expense of underestimation of wall clock
time which appears to be very large for delay_us=0. Instead of timing
out after approximately XILINX_DMA_LOOP_COUNT microseconds, the timeout
takes XILINX_DMA_LOOP_COUNT * 1000 * (time that the overhead of the for
loop in poll_timeout_us_atomic takes) which is in the range of several
minutes for XILINX_DMA_LOOP_COUNT=1000000. Fix this by using a non-zero
value for delay_us. Use delay_us=10 to keep the delay in the hot path of
starting DMA transfers minimal but still avoid CPU stalls in case of
unexpected hardware failures.
One-off measurement with delay_us=0 causes the cpu to busy wait around 7
minutes in the timeout case. After applying this patch with delay_us=10
the measured timeout was 1053428 microseconds which is roughly
equivalent to the expected 1000000 microseconds specified in
XILINX_DMA_LOOP_COUNT.
Add a constant XILINX_DMA_POLL_DELAY_US for delay_us value. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: free zones array on device power-off
null_init_zoned_dev() allocates dev->zones when a zoned device is powered
on, but null_del_dev() never frees it on power-off; dev->zones is only
freed later in null_free_dev(), when the configfs directory is removed. If
the device is powered off and then on again, null_init_zoned_dev()
allocates a new array and overwrites the dev->zones pointer, leaking the
previous allocation each power cycle.
Free dev->zones in null_del_dev() via null_free_zoned_dev() to solve it.
And calling null_free_zoned_dev() in null_free_dev() is no longer necessary
because every caller already invokes null_del_dev() first: via
nullb_group_drop_item() before nullb_device_release(), in the
null_add_dev() error path of null_create_dev(), and in null_destroy_dev().
Remove the redundant call.
And take &lock around zone_cond_store() in the two store wrappers to
serialize dev->zones check-and-deref against its alloc/free, which already
run under &lock. The reason there was no problem before is that only
nullb_device_release() or null_exit() frees the dev->zones, which
guarantees that subsequent users won't access the configfs interface. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix deadlock in complain-mode change_hat
The use of change_hat when in complain mode can cause a deadlock
when the hat doesn't exist and a new learning profile is created
for the missing profile. This is because change_hat() has taken
the lock to search the hat list and creating the new learning
profile needs to take the lock to add it to the list.
From the bug report:
Originally found in 7.0.0 in LTS ubuntu 26.04 with pam_apparmor + su
in complain mode set to change hats. Then verified in newest
available vanilla kernel I've compiled to see if still present:
7.2-rc7 vanilla -> affected
checked also some other kernels:
6.18.44 vanilla -> affected
6.12.95 with debian patches -> unaffected
On systems without bug (for example 6.12.95 debian) it just prints:
aa_change_hat rc=0
On systems with bug, the executable always hangs, prints nothing and
becomes unkillable. (And once stuck this way, it will cause any
further hat changes to also cause the changing process to get stuck)
Then in syslog you can find hint about cause:
kernel: INFO: task hat:3409 blocked for more than 483 seconds.
kernel: Not tainted 7.2.0-rc7 #1
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: task:hat state:D stack:0 pid:3409 tgid:3409 ppid:2605 task_flags:0x400000 flags:0x00080800
kernel: Call Trace:
kernel: <TASK>
kernel: __schedule+0x48f/0xfe0
kernel: schedule+0x27/0xa0
kernel: schedule_preempt_disabled+0x15/0x30
kernel: __mutex_lock.constprop.0+0x569/0xa10
kernel: aa_new_learning_profile+0x15f/0x210
kernel: build_change_hat+0x19f/0x3b0
kernel: change_hat.isra.0+0x5dd/0xd60
kernel: aa_change_hat+0x2f3/0x710
kernel: aa_setprocattr_changehat+0x121/0x1f0
kernel: do_setattr+0x28c/0x340
kernel: apparmor_setselfattr+0x20/0x50
kernel: security_setselfattr+0xf6/0x110
kernel: __x64_sys_lsm_set_self_attr+0x53/0x90
kernel: do_syscall_64+0xdd/0x5e0
kernel: ? __mod_memcg_lruvec_state+0xfd/0x260
kernel: ? lruvec_stat_mod_folio+0x8d/0xd0
kernel: ? __folio_mod_stat+0x2d/0x90
kernel: ? map_anon_folio_pte_nopf+0xd1/0x1f0
kernel: ? do_anonymous_page+0x184/0xa10
kernel: ? __handle_mm_fault+0x805/0x870
kernel: ? count_memcg_events+0xef/0x230
kernel: ? handle_mm_fault+0x1f0/0x2f0
kernel: ? do_user_addr_fault+0x2bb/0x7b0
kernel: ? do_syscall_64+0x94/0x5e0
kernel: ? exc_page_fault+0x75/0x160
kernel: entry_SYSCALL_64_after_hwframe+0x76/0x7e
kernel: RIP: 0033:0x7f815e134c8d
kernel: RSP: 002b:00007fff6df94ea8 EFLAGS: 00000246 ORIG_RAX: 00000000000001cc
kernel: RAX: ffffffffffffffda RBX: 0000556d8c81d040 RCX: 00007f815e134c8d
kernel: RDX: 0000000000000046 RSI: 0000556d8c81d040 RDI: 0000000000000064
kernel: RBP: 00007fff6df94ef0 R08: 00007f815e212ac8 R09: 000000000000000c
kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000556d8c81d010
kernel: R13: 0000000000000026 R14: 0000000000000046 R15: 0000000000000064
kernel: </TASK>
kernel: INFO: task hat:3409 is blocked on a mutex likely owned by task hat:3409.
To fix the issue, lift the locking out of the core of
aa_new_learning_profile(), introduce a wrapper function that takes the
lock where needed, and have build_change_hat() call the core function
that no longer takes the lock.
In addition fix 4 other issues introduced by commit
32e92764d6f8d ("apparmor: grab ns lock and refresh when looking up changehat child profiles")
- aa_get_profile_rcu() was replaced-by: aa_get_profile without the
accompanying rcu_dereference_protected()
- an extra aa_get_label(label) was introduced at the start of
change_hat() without an accompanying aa_put_label() causing a
reference count leak.
- a reference count leak was introduced in the label_is_stale(label)
case, where the newest profile would be leaked instead of the
label passed to the function.
- a potential UAF when the lookup walks up the tree with new_ns != ns
the new label refere
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix BUG_ON in __ceph_build_xattrs_blob() due to stale blob size
The generic/642 test-case can reproduce the kernel crash:
[40243.605254] ------------[ cut here ]------------
[40243.605956] kernel BUG at fs/ceph/xattr.c:918!
[40243.607142] Oops: invalid opcode: 0000 [#1] SMP PTI
[40243.608067] CPU: 7 UID: 0 PID: 498762 Comm: kworker/7:1 Not tainted 7.0.0-rc7+ #3 PREEMPT(full)
[40243.609700] Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[40243.611820] Workqueue: ceph-msgr ceph_con_workfn
[40243.612715] RIP: 0010:__ceph_build_xattrs_blob+0x1b8/0x1e0
[40243.613731] Code: 0f 84 82 fe ff ff e9 cf 8e 56 ff 48 8d 65 e8 31 c0 5b 41 5c 41 5d 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 c3 cc cc cc cc <0f> 0b 4c 8b 62 08 41 8b 85 24 07 00 00 49 83 c4 04 41 89 44 24 fc
[40243.616888] RSP: 0018:ffffcc80c4d4b688 EFLAGS: 00010287
[40243.617773] RAX: 0000000000010026 RBX: 0000000000000001 RCX: 0000000000000000
[40243.618928] RDX: ffff8a773798dee0 RSI: 0000000000000000 RDI: 0000000000000000
[40243.620158] RBP: ffffcc80c4d4b6a0 R08: 0000000000000000 R09: 0000000000000000
[40243.621573] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a75f3b58000
[40243.622907] R13: ffff8a75f3b58000 R14: 0000000000000080 R15: 000000000000bffd
[40243.624054] FS: 0000000000000000(0000) GS:ffff8a787d1b4000(0000) knlGS:0000000000000000
[40243.625331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[40243.626269] CR2: 000072f390b623c0 CR3: 000000011c02a003 CR4: 0000000000372ef0
[40243.627408] Call Trace:
[40243.627839] <TASK>
[40243.628188] __prep_cap+0x3fd/0x4a0
[40243.628789] ? do_raw_spin_unlock+0x4e/0xe0
[40243.629474] ceph_check_caps+0x46a/0xc80
[40243.630094] ? __lock_acquire+0x4a2/0x2650
[40243.630773] ? find_held_lock+0x31/0x90
[40243.631347] ? handle_cap_grant+0x79f/0x1060
[40243.632068] ? lock_release+0xd9/0x300
[40243.632696] ? __mutex_unlock_slowpath+0x3e/0x340
[40243.633429] ? lock_release+0xd9/0x300
[40243.634052] handle_cap_grant+0xcf6/0x1060
[40243.634745] ceph_handle_caps+0x122b/0x2110
[40243.635415] mds_dispatch+0x5bd/0x2160
[40243.636034] ? ceph_con_process_message+0x65/0x190
[40243.636828] ? lock_release+0xd9/0x300
[40243.637431] ceph_con_process_message+0x7a/0x190
[40243.638184] ? kfree+0x311/0x4f0
[40243.638749] ? kfree+0x311/0x4f0
[40243.639268] process_message+0x16/0x1a0
[40243.639915] ? sg_free_table+0x39/0x90
[40243.640572] ceph_con_v2_try_read+0xf58/0x2120
[40243.641255] ? lock_acquire+0xc8/0x300
[40243.641863] ceph_con_workfn+0x151/0x820
[40243.642493] process_one_work+0x22f/0x630
[40243.643093] ? process_one_work+0x254/0x630
[40243.643770] worker_thread+0x1e2/0x400
[40243.644332] ? __pfx_worker_thread+0x10/0x10
[40243.645020] kthread+0x109/0x140
[40243.645560] ? __pfx_kthread+0x10/0x10
[40243.646125] ret_from_fork+0x3f8/0x480
[40243.646752] ? __pfx_kthread+0x10/0x10
[40243.647316] ? __pfx_kthread+0x10/0x10
[40243.647919] ret_from_fork_asm+0x1a/0x30
[40243.648556] </TASK>
[40243.648902] Modules linked in: overlay hctr2 libpolyval chacha libchacha adiantum libnh libpoly1305 essiv intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit kvm_intel kvm irqbypass joydev ghash_clmulni_intel aesni_intel rapl input_leds mac_hid psmouse vga16fb serio_raw vgastate floppy i2c_piix4 pata_acpi bochs qemu_fw_cfg i2c_smbus sch_fq_codel rbd dm_crypt msr parport_pc ppdev lp parport efi_pstore
[40243.654766] ---[ end trace 0000000000000000 ]---
Commit d93231a6bc8a ("ceph: prevent a client from exceeding the MDS
maximum xattr size") moved the required_blob_size computation to before
the __build_xattrs() call, introducing a race.
__build_xattrs() releases and reacquires i_ceph_lock during execution.
In that window, handle_cap_grant() may update i_xattrs.blob with a
newer MDS-provided blob and bump i_xattrs.version. When
__bui
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp-mach-common: Add missing error check for clock acquisition
The acp_card_rt5682_init() and acp_card_rt5682s_init() functions did not
check the return values of clk_get(). This could lead to a kernel crash
when the invalid pointers are later dereferenced by clock core
functions.
Fix this by:
1. Changing clk_get() to the device-managed devm_clk_get().
2. Adding IS_ERR() checks immediately after each clock acquisition. |
| In the Linux kernel, the following vulnerability has been resolved:
kcm: fix zero-frag skb in frag_list on partial sendmsg error
Syzkaller reported a warning in kcm_write_msgs() when processing a
message with a zero-fragment skb in the frag_list.
When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb,
it allocates a new skb (tskb) and links it into the frag_list before
copying data. If the copy subsequently fails (e.g. -EFAULT from
user memory), tskb remains in the frag_list with zero fragments:
head skb (msg being assembled, NOT yet in sk_write_queue)
+-----------+
| frags[17] | (MAX_SKB_FRAGS, all filled with data)
| frag_list-+--> tskb
+-----------+ +----------+
| frags[0] | (empty! copy failed before filling)
+----------+
For SOCK_SEQPACKET with partial data already copied, the error path
saves this message via partial_message for later completion. For
SOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so a
subsequent zero-length write(fd, NULL, 0) completes the message and
queues it to sk_write_queue. kcm_write_msgs() then walks the
frag_list and hits:
WARN_ON(!skb_shinfo(skb)->nr_frags)
TCP has a similar pattern where skbs are enqueued before data copy
and cleaned up on failure via tcp_remove_empty_skb(). KCM was
missing the equivalent cleanup.
Fix this by tracking the predecessor skb (frag_prev) when allocating
a new frag_list entry. On error, if the tail skb has zero frags,
use frag_prev to unlink and free it in O(1) without walking the
singly-linked frag_list. frag_prev is safe to dereference because
the entire message chain is only held locally (or in kcm->seq_skb)
and is not added to sk_write_queue until MSG_EOR, so the send path
cannot free it underneath us.
Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the log
if the condition is somehow hit repeatedly.
There are currently no KCM selftests in the kernel tree; a simple
reproducer is available at [1].
[1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: q6asm: drop DSP responses for closed data streams
'Commit a354f030dbce ("ASoC: qcom: q6asm: handle the responses
after closing")' attempted to ignore DSP responses arriving
after a stream had been closed.
However, those responses were still handled, causing lockups.
Fix this by unconditionally dropping all DSP responses associated with
closed data streams. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: handle attr_set_size() errors when truncating files
If attr_set_size() fails while truncating down, the error is silently
ignored and the inode may be left in an inconsistent state. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: don't update i_size in cifs_do_truncate without a cached handle
If find_writable_file() returns null, cifs_file_flush will return
0 without issuing set_file_size, and the outer 'if (!rc)' block
will set i_size to 0 before telling the server to truncate. If
the cifs_open() then fails, the inode will have size 0, while
the server file is unchanged.
Move the netfs_resize_file() and cifs_setsize() into the 'if
(cfile)', so they only run after a successful set_file_size.
In the no-handle else branch, evict stale pages with
truncate_inode_pages before the O_TRUNC open to dispose of old
cache pages, and let the open response set the i_size. |
| HCL BigFix AEX is affected by an Information Disclosure vulnerability due to improper handling of errors or exceptional conditions. This could allow an attacker to obtain sensitive technical information, including stack traces, system details, or internal paths, potentially facilitating further attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: propagate DACL parsing errors
parse_dacl() silently accepts truncated ACEs and allocation failures,
allowing set_info_sec() to continue with an incomplete ACL conversion.
Return parsing and allocation errors to parse_sec_desc() so malformed
security descriptors are rejected before inode attributes or ACL xattrs
are updated. |
| Netty netty-tcnative before 2.0.84.Final contains a denial of service vulnerability in the tcn_write_to_bytebuffer BIO write callback that overreports bytes consumed. Remote TLS 1.3 peers can provoke queued post-handshake records like NewSessionTicket or KeyUpdate to truncate flights, fail connections, or abort the JVM process. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: put the chained BO when its mapping fails
amdxdna_cmd_set_error() looks up the first BO of a command chain, which
takes a reference, and drops it at the end of the function. The mapping of
that BO is established in between, and the failure path returns without the
put, so the reference is leaked.
Ordinary use does not reach it. The chain has been submitted before any of
this runs, so aie2_cmdlist_fill_slot() has already called
amdxdna_cmd_get_op() on that BO and amdxdna_gem_vmap() has cached its
address. What makes it reachable is that the BO is resolved again by
handle here, and the handle is userspace's to recycle: closing it after
submission and importing a dma-buf whose exporter implements no vmap onto
the same id leaves amdxdna_gem_get_obj() returning an object this cannot
map, since prime_import() types every import AMDXDNA_BO_SHARE. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: check link is beaconing for color change
When trying to do a color change, validate that the link is
beaconing first, to avoid calling the driver with an invalid
link. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: Disable TPM on null key name mismatch
The null key name check exists to protect against TPM reset attacks, so
a mismatch should stop the device from serving further requests.
Currently it does not disable the chip when it finds a mismatch.
The mismatch is logged:
tpm tpm0: null key integrity check failed
but the chip keeps serving commands:
/ # tpm2_getcap -c properties-fixed
TPM_PT_FAMILY_INDICATOR:
as UINT32: 0x08322e3000
as string: "2.0"
...
tpm2_load_null() where the null key name check is run sets the chip as
disabled only if the rc is non zero. When the mismatch is seen, rc is
zero at that point and it returns success. The other issue is that the
caller expects the null key handle to be populated when the function
returns 0 which it does here without writing the handle and proceeds
assuming the null key handle is valid.
During the test, I noticed that tpm2_start_auth_session() uses the
uninitialized stack value as the key handle since tpm2_load_null()
returns 0 despite the integrity failure and proceeds with
TPM2_CC_START_AUTH_SESS with this value as salt key handle.
Set rc to -ENODEV on the mismatch. The error path then disables the chip
and returns the correct code to the caller.
Tested in QEMU with swtpm and CONFIG_TCG_TPM2_HMAC=y by making
TPM2_CC_CONTEXT_LOAD fail with TPM2_RC_INTEGRITY and changing the name
of the re-created null key. The chip is now disabled on the mismatch. |
| In the Linux kernel, the following vulnerability has been resolved:
module: fix lost error code from codetag_load_module()
If codetag_load_module() fails, err is not set to reflect the failure
and load_module() returns 0 after the module has been torn down.
Also, if the module is a livepatch, mod->klp_info allocated by
copy_module_elf() leaks on this error path. Free it via a new
livepatch_cleanup label. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xilinx: axienet: Free outstanding DMA buffers on dmaengine stop
In the dmaengine path the driver pre-submits RX buffers and holds
in-flight TX buffers whose SKBs are DMA-mapped by the driver and freed
only in the completion callbacks. On ndo_stop() dmaengine_terminate_sync()
aborts these descriptors without running their callbacks, and the driver
then frees only the ring shells, leaking every SKB still owned by the
engine and its DMA mapping on each ifdown. With 128 RX buffers pre-posted
per channel, the mapping leak can eventually exhaust a limited IOMMU
aperture.
Clear the slot's skb in the TX and RX callbacks so a non-NULL skb marks a
slot that still owns a live, DMA-mapped buffer, and on stop unmap and free
every such buffer.
axienet_dma_rx_cb() runs from the DMA tasklet and re-arms the RX ring on
each completion, so it can race axienet_stop(): a completion may submit a
fresh buffer after dmaengine_terminate_sync() has returned, leaving the
channel armed with a buffer the teardown then frees while the engine may
still write into it (dma_release_channel() does not stop it either). Add a
lock that axienet_dma_rx_cb() holds across the @stopping check and the
resubmit, and axienet_stop() holds to set @stopping before terminating.
Once @stopping is set no callback can arm a new buffer, and any armed just
before is aborted by the terminate, so teardown only frees buffers the
engine no longer owns. |
| Django REST framework is a toolkit for building Web APIs. From 3.12.0 until 3.18.2, TokenProxy.delete() in rest_framework/authtoken/models.py uses the proxy's user-id pk while the concrete Token token-string primary key identifies rows, so Django issues a deletion query that matches no row and reports zero deletions without raising an error. Applications, administrative integrations, or operational scripts that revoke credentials through a TokenProxy instance can therefore believe revocation succeeded while the token remains live and continues authenticating. DRF's own TokenAdmin.delete_model workaround is not affected, but other callers can leave access available indefinitely because DRF tokens do not expire automatically. This issue is fixed in version 3.18.2. |
| Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: Pluggable Auth). Supported versions that are affected are MySQL Server: 8.4.0-8.4.12, 9.7.0-9.7.3, 26.7.0-26.7.1; MySQL Cluster: 8.0.0-8.0.49, 8.4.0-8.4.12, 9.7.0-9.7.3 and 26.7.0-26.7.1. Easily exploitable vulnerability allows low privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 6.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: rohm-bm1390: Return error when read fails
The data reading function ignores the cached error value, and
unconditionally returns 0. Return cached 'ret' -value after stopping
the measurement so user knows if read failed and data is garbage. |
