| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Memory Corruption via Uncanceled AIO Requests on Error: libkcapi's one-shot AIO path can return an error before all submitted IOCBs are drained, allowing later kernel writes into caller-owned output buffers. |
| In parseMetaData of StagefrightMetadataRetriever.cpp, there is a possible denial of service due to a stack buffer overflow. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
xen-blkback: Avoid UAF when reading I/O statistics
Reading I/O statistics via sysfs concurrently with tearing down a
frontend device might result in UAF or a NULL dereference, as the
reading of the statistics data is not synchronized with freeing the
data.
Use a rwlock for synchronizing.
This is XSA-528 / CVE-2026-100082 |
| In the Samsung GPU driver, improper reference count handling during command submission can lead to memory corruption. |
| In the Samsung Exynos GPU driver, improper synchronization during buffer object creation and closing can lead to memory corruption |
| A vulnerability was determined in VStarcam O-KAM SuperIPCam 1.3.3.32. Affected by this issue is the function FUN_005a2d44 of the file SuperIPCam.exe of the component P2P Session Teardown. This manipulation causes use after free. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netback: Fix UAF when reading statistics data
The network statistic data in the driver is protected by RCU.
Unfortunately when tearing down the queues after an error during
connecting to the frontend (e.g. due to illegal Xenstore data filled
in by the guest), the statistic data is being freed without
synchronizing the RCU state. In case the data is being read via sysfs
in this phase, access to already freed memory or memory being in new
use is possible.
Fix that by calling synchronize_net() before freeing the queue data.
This is XSA-526 / CVE-2026-100080 |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netback: defer xenvif_mcast_addr_list_free()
In order for the function to legitimately avoid locking/RCU, it needs to
run after all TX/RX processing has finished/stopped: Lookups happen from
xenvif_start_xmit(), while adds/removes happen from xenvif_tx_action()
(called out of xenvif_poll()).
Move the call out of xenvif_disconnect_data() (the call to the function
from connect()'s error path doesn't require any cleaning up there), and
put it past the synchronization point in backend_disconnect().
This is XSA-527 / CVE-2026-100081. |
| A use-after-free caused by lack of lifecycle management when adding / removing XInput master devices in X.org X Server before 21.1.25 and XWayland before 24.1.14 could be used by authenticated X Clients to crash the X server or potentially execute code in X server context. |
| A use-after-free in present_clear_window_notifies() in the X.org X Server before 21.1.25 and X Wayland before 24.1.14 could be used by malicious X clients to crash or potentially execute code in the X server context. |
| Ladybird is a truly independent web browser. Prior to 209579c96473c75bd5eba9701fcadb841a045964, FinalizationRegistry::cleanup() in Libraries/LibJS/Runtime/FinalizationRegistry.cpp removed a dead record from m_records, retained an iterator to the next FinalizationRecord, and then invoked attacker-controlled JavaScript through the cleanup callback. If that callback called unregister() for the next record, remove_by_token() freed the node referenced by the retained iterator, and the next cleanup iteration read its target and held_value fields after free. This reliably crashes instrumented WebContent builds and creates a memory-corruption primitive in production builds. This vulnerability is fixed by commit 209579c96473c75bd5eba9701fcadb841a045964. |
| A remote code execution vulnerability was identified in GitHub Enterprise Server in the Git service (babeld). babeld held references into internal collections while calling into the SSH library, where a re-entrant callback could modify a collection and invalidate those references. An attacker with an account and SSH access to the instance could leverage this use-after-free into a controlled write and run arbitrary commands as babeld, including disclosure of its environment secrets. Exploitation required per-build memory offsets; failed attempts crashed babeld. This affected all releases prior to 3.23 and was fixed in 3.22.3, 3.21.8, 3.20.10, and 3.19.14. This vulnerability was reported via the GitHub Bug Bounty program. |
| CivetWeb through 1.16, when built with USE_HTTP2 and enable_http2 on, contains a use-after-free vulnerability in handle_http2() that retains freed :method and :path pointers. Unauthenticated remote attackers can send a later HEADERS frame omitting these pseudo-headers to influence request method or path seen by access rules, or crash the server. |
| The vulnerability is a Use-After-Free (UAF) in the EVS AIDL HAL, arising from a data race on an unsynchronized `std::weak_ptr` within `EvsEnumerator::openCamera()`. Specifically, concurrent calls from a privileged UID (e.g., `AID_AUTOMOTIVE_EVS`) can cause a torn `weak_ptr` state, leading to a virtual call through a freed object's vtable at `cameraObj->getCameraInfo(&desc)`. This allows for potential arbitrary code execution within the `hal_evs_default` process. |
| A flaw was found in libarchive. An attacker can cause a Denial of Service (DoS) or potential information disclosure due to a use-after-free vulnerability, which occurs when a program reads memory that has already been released. This issue arises when the archive_entry_copy_mac_metadata() function deallocates an internal buffer before completing a data copy. An attacker who can supply input to an application utilizing this function can trigger the flaw to crash the application or read uninitialized memory data. |
| A vulnerability was found in libssh, where an uninitialized variable exists under certain conditions in the privatekey_from_file() function. This flaw can be triggered if the file specified by the filename doesn't exist and may lead to possible signing failures or heap corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix use-after-free in ip6_finish_output2()
ip6_finish_output2() caches a pointer to the IPv6 destination
address (daddr) before invoking lwtunnel_xmit(). The LWT-BPF
transmit path or other encapsulation operations within
lwtunnel_xmit() can reallocate the skb head, freeing the memory
that daddr points to. When lwtunnel_xmit() returns
LWTUNNEL_XMIT_CONTINUE, the function continues to use the stale
daddr pointer to compute the nexthop and to look up or create the
neighbour entry. This results in a use-after-free read, which can
leak sensitive kernel data, pollute the neighbour table with
arbitrary values, misdirect traffic, or crash the system.
Fix this by re-fetching the IPv6 header and the destination
address pointer after lwtunnel_xmit() returns
LWTUNNEL_XMIT_CONTINUE, ensuring that the subsequent nexthop
computation and neighbour lookup operate on valid memory. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/dlm: require a ref for locking_state debugfs open
debug_lockres_open() copies inode->i_private into struct debug_lockres and
debug_lockres_release() later drops that pointer with dlm_put(). That
only works if open successfully pins the struct dlm_ctxt.
Today open calls dlm_grab(dlm) but ignores its return value. Once the
last domain unregister has removed the context from dlm_domains,
dlm_grab() returns NULL, yet open still stores the raw pointer and returns
success. The later release path is outside the debugfs removal barrier,
so it can call dlm_put() after dlm_free_ctxt_mem() has freed the context.
KASAN reports this as a slab-use-after-free in dlm_put() called from
debug_lockres_release().
Fail the open when dlm_grab() cannot acquire the reference and unwind the
seq_file private state before returning. That keeps locking_state from
handing out a file descriptor whose release path does not own the
dlm_ctxt.
The buggy scenario involves two paths, with each column showing the order
within that path:
locking_state debugfs open: last domain unregister:
1. debug_lockres_open() reads 1. dlm_unregister_domain() calls
inode->i_private. dlm_complete_dlm_shutdown().
2. debug_lockres_open() calls 2. shutdown removes the dlm_ctxt from
dlm_grab(dlm) and gets NULL. dlm_domains.
3. open still stores the raw dlm 3. final teardown reaches
pointer in dl->dl_ctxt and dlm_free_ctxt_mem() and frees it.
returns success.
4. debug_lockres_release() later
calls dlm_put(dl->dl_ctxt).
Validation reproduced this kernel report:
KASAN slab-use-after-free in dlm_put+0x82/0x200
RIP: 0033:0x7f4d349bc9e0
The buggy address belongs to the object at ffff888103a3c000 which belongs
to the cache kmalloc-2k of size 2048
The buggy address is located 816 bytes inside of freed 2048-byte region
[ffff888103a3c000, ffff888103a3c800)
Write of size 4
Call trace:
dump_stack_lvl+0x66/0xa0 (?:?)
print_report+0xd0/0x630 (?:?)
dlm_put+0x82/0x200 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x188/0x2f0 (?:?)
kasan_report+0xe4/0x120 (?:?)
kasan_check_range+0x105/0x1b0 (?:?)
debug_lockres_release+0x53/0x80 (fs/ocfs2/dlm/dlmdebug.c:587)
dlm_put+0x9/0x200 (?:?)
debug_lockres_release+0x5c/0x80 (fs/ocfs2/dlm/dlmdebug.c:587)
full_proxy_release+0x67/0x90 (?:?)
__fput+0x1df/0x4b0 (?:?)
do_raw_spin_lock+0x10f/0x1b0 (?:?)
fput_close_sync+0xd2/0x170 (?:?)
__x64_sys_close+0x55/0x90 (?:?)
do_syscall_64+0x10c/0x640 (arch/x86/entry/syscall_64.c:87)
irqentry_exit+0xac/0x6e0 (?:?)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?)
Freed by task stack:
kasan_save_stack+0x33/0x60 (?:?)
kasan_save_track+0x14/0x30 (?:?)
kasan_save_free_info+0x3b/0x60 (?:?)
__kasan_slab_free+0x5f/0x80 (?:?)
kfree+0x30f/0x580 (?:?)
dlm_put+0x1ce/0x200 (?:?)
dlm_unregister_domain+0xf6/0xb30 (?:?)
o2cb_cluster_disconnect+0x6b/0x90 (?:?)
ocfs2_cluster_disconnect+0x41/0x70 (?:?)
ocfs2_dlm_shutdown+0x1c4/0x220 (?:?)
ocfs2_dismount_volume+0x38a/0x550 (?:?)
generic_shutdown_super+0xc3/0x220 (?:?)
kill_block_super+0x29/0x60 (?:?)
deactivate_locked_super+0x66/0xe0 (?:?)
cleanup_mnt+0x13d/0x210 (?:?)
task_work_run+0xfa/0x170 (?:?)
exit_to_user_mode_loop+0xd6/0x430 (?:?)
do_syscall_64+0x3cb/0x640 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas_tf: fix use-after-free in lbtf_free_adapter()
lbtf_free_adapter() calls timer_delete(&priv->command_timer), which does
not wait for a running command_timer_fn() callback. lbtf_free_adapter()
runs on the teardown path right before ieee80211_free_hw() frees priv,
both in lbtf_remove_card() and in the probe error path. command_timer is
armed by mod_timer() in lbtf_cmd() whenever a firmware command is sent.
command_timer_fn() dereferences priv. If a command times out as the
device is removed, command_timer_fn() runs concurrently with teardown and
dereferences priv after it has been freed.
This is the same use-after-free that commit 03cc8f90d053 ("wifi: libertas:
fix use-after-free in lbs_free_adapter()") fixed in the sibling libertas
driver. The libertas_tf variant has the identical pattern and was left
unchanged. Use timer_delete_sync() so any in-flight callback completes
before priv is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix double-add of pseudo-locked region's RMID to free list
A pseudo-locked group's RMID is freed when it is created. On unmount
rmdir_all_sub() unconditionally frees all RMID of all groups, resulting
in a double-free of the pseudo-locked group's RMID. The consequence of this
is that the original free results in the pseudo-locked group's RMID being
added to the rmid_free_lru linked list and the second free then attempts
to add the same RMID entry to the rmid_free_lru again.
Do not double-free a pseudo-locked group's RMID. |
