| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A weakness has been identified in mathurvishal CloudClassroom-PHP-Project. This issue affects some unknown processing of the component Global Session Handler. Executing a manipulation can lead to session expiration. The attack may be launched remotely. A high complexity level is associated with this attack. The exploitability is assessed as difficult. The exploit has been made available to the public and could be used for attacks. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The vendor was contacted early about this disclosure but did not respond in any way. |
| Insufficient session expiration in Apache Wicket.
org.apache.wicket.protocol.ws.WebSocketSettings#newWebSocketRequest() wraps the WebSocket upgrade request in an org.apache.wicket.protocol.ws.api.ServletRequestCopy, which is kept for the life of the connection and used to build the request for every frame that arrives on it. Copying the request is deliberate and is documented as such, because the container recycles the upgrade request once the handshake is over. The container session is copied along with it, into an org.apache.wicket.protocol.ws.api.HttpSessionCopy holding the session attributes as they stood when the connection was opened. That second copy is not necessary, because a session, unlike a request, is not discarded at the end of a request. Every frame afterwards resolves its Wicket session through ISessionStore#lookup(), which reads it out of the copy, so the connection is detached from the live container session for as long as it stays open.
Ending the session through the container therefore does not end the connection. After an idle timeout, an HttpSession#invalidate() call made from a filter or from a security framework, a container-managed logout, or a session replacement, the connection goes on resolving the org.apache.wicket.Session instance that existed when it was opened, together with that session's attributes and, for applications built on wicket-auth-roles, the signed-in state held on that same instance, so an authorization decision taken inside a WebSocket callback is taken against an identity that has already been revoked. The copy is also what the connection writes through: a Session#invalidateNow() issued from inside a WebSocket callback invalidates the copy and leaves the container session valid, and session attributes set over the connection are written to the copy rather than to the session.
An application is affected where it uses Wicket's native WebSocket support on pages or shared resources that require an authenticated session, and where sessions are ended by the container rather than by Wicket. Session#invalidateNow(), and AuthenticatedWebSession#invalidate() and #signOut() which call it, remain effective for a WebSocketBehavior on a page: they clear the page manager, and the connection can then no longer resolve the page it was opened for. A WebSocketResource is not limited in that way, because a frame naming a resource is served against a throwaway page and never consults the page manager, so such a connection outlives Wicket's own sign-out as well. Some containers close WebSocket connections themselves when the HTTP session they were opened under is destroyed, in which case the connection ends regardless; that is a property of the container rather than of Wicket. Applications that do not use the native WebSocket support are not affected.
This issue affects Apache Wicket: from 8.0.0 through 8.19.0, from 9.0.0 through 9.24.0, from 10.0.0 through 10.11.0. Older, unsupported releases from 6.0.0 onwards are also affected. Users are recommended to upgrade to version 8.20.0, 9.25.0 or 10.12.0, which fix the issue. |
| The system fails to invalidate existing access tokens associated with sub-organization users during sensitive account management operations such as password reset, role change, or sub-organization disablement. This oversight allows previously issued tokens to remain active even after the user's access context has been modified or revoked through administrative actions.
The identified issue could lead to unauthorized access by a malicious actor, but only when all of the following conditions are met: previously issued access tokens remain active, and these tokens have been exposed to malicious actors. |
| Supabase Realtime provides Broadcast, Presence, and Postgres Changes via WebSockets. Prior to version 2.103.1, the REST broadcast endpoints accept an expired JWT when the exp claim is encoded as a JSON string instead of a JSON number. The same route rejects an expired integer exp token signed with the same tenant secret. The accepted request returns 202 and emits the broadcast to subscribers. This could allow an unauthenticated attacker can broadcast realtime messages to subscribers. The attack can be performed via the Internet/only from within the supabase project. The impact of broadcasting messages to subscribers is application specific. This issue has been patched in version 2.103.1. |
| ArcadeDB before 26.10.2 contains an improper authorization vulnerability that allows revoked users to retain access through already-open Postgres, Bolt, MongoDB, or Redis wire-protocol connections. Attackers holding an existing connection can keep reading and writing data after deletion, grant removal, or password rotation, because executors keep a stale ServerSecurityUser. |
| OpenBao before 2.6.4 and 2.7.x before 2.7.1 does not check Secret ID expiration at use in the AppRole auth method, leaving expired Secret IDs valid until the periodic tidy removes them. An attacker holding an expired, untidied Secret ID can log in and gain access beyond its TTL. |
| When the `allowed_scopes` configuration is enabled, the OAuth2 token introspection mechanism does not immediately invalidate a token in the cache after a revocation request. This results in a scenario where an access token that was introspected immediately before a revocation request may be returned again to the client after revocation, until the relevant cache entry is cleared.
The security consequence is that a revoked access token may be re-issued to the client during the cache lifetime. While the re-issued token is not treated as valid for API authorization, affected users may be unable to obtain a new valid access token until the cache is cleared, which can disrupt authentication flows. |
| In deployments of WSO2 Identity Server configured with a case-insensitive user store and a case-sensitive database for identity data, mismatches in username case handling can occur. This inconsistency results in OAuth token revocation operations failing to correctly identify usernames containing mixed-case characters during certain lifecycle events, preventing tokens from being invalidated.
A malicious actor can exploit this vulnerability by possessing a valid access or refresh token associated with a mixed-case username. In affected configurations, these tokens may not be revoked when expected. The actor can then leverage these unrevoked tokens, before their expiry, to continue performing actions that should have been restricted, effectively bypassing intended access controls. |
| MikroTik RouterOS through 7.24.5 contains a session token replay vulnerability in the WebFig interface that allows attackers to bypass authentication by replaying captured session tokens across new ECDH sessions. The makeSessionKey function in libucrypto.so generates tokens using fixed salts without incorporating channel-specific or session-specific input, and the user service validates tokens against the login store without verifying channel context, enabling stolen tokens to grant persistent administrative access until the token store is explicitly cleared. This vulnerability extends the impact of CVE-2025-61481, which identified the underlying transport-layer exposure without a corresponding fix. |
| REDAXO before 5.21.5 contains an insufficient session expiration vulnerability that allows attackers to retain account access by keeping the current session and stay-logged-in key valid after a password change. Attackers who obtained a user's session id or stay-logged-in cookie can keep backend access after the password change, via the cookie for up to three months. |
| SmarterMail before build 9777 contains a privilege escalation vulnerability where JWT access and refresh tokens embed a role claim at issuance that is not revalidated against the account's current role when redeemed through POST /api/v1/auth/refresh-token. Attackers who capture a refresh token issued before an administrator demotion, or a demoted user whose session was not actively polling at the time of demotion, can replay the stale token to obtain a new access token retaining the higher-privilege role (such as DomainAdmin or SysAdmin) until natural token expiry. |
| OpenBao before 2.6.4 and 2.7.x before 2.7.1 does not verify, when renewing a token issued by the Kubernetes Auth method, that the service account token originally used to authenticate is still valid. An authenticated attacker can keep renewing such tokens to persist access after the Kubernetes service account has been deleted. |
| Django REST framework is a toolkit for building Web APIs. From 3.12.0 until 3.18.2, TokenProxy.delete() in rest_framework/authtoken/models.py uses the proxy's user-id pk while the concrete Token token-string primary key identifies rows, so Django issues a deletion query that matches no row and reports zero deletions without raising an error. Applications, administrative integrations, or operational scripts that revoke credentials through a TokenProxy instance can therefore believe revocation succeeded while the token remains live and continues authenticating. DRF's own TokenAdmin.delete_model workaround is not affected, but other callers can leave access available indefinitely because DRF tokens do not expire automatically. This issue is fixed in version 3.18.2. |
| Authentication tokens issued by the E3's web management interface on login are given an expiration time far beyond any reasonable session lifetime, effectively making them non-expiring. A token obtained through interception or device compromise remains valid for authenticated access for an extended period. |
| IBM Storage TS4500 Library 1.1.1.6 through 1.12.0.3 IBM TS4500 Tape Library/Diamondback Tape Library does not invalidate session which could allow an authenticated user to impersonate another user on the system. |
| The Apache Airflow Keycloak auth manager did not end the session on logout: the logout route revoked the presented token, but `KeycloakJWTMiddleware` then issued a new, unrevoked token on the same response, so the user stayed logged in. Deployments using the Keycloak auth manager are affected: after a user logs out, anyone with later access to the same browser (for example on a shared workstation) can continue to act as that user.
Users of apache-airflow-providers-keycloak are recommended to upgrade to apache-airflow-providers-keycloak 0.11.1 or later. |
| @fastify/jwt is a JWT utility plugin for Fastify. In versions prior to 10.2.5, the top-level sign and verify methods replace the globally configured defaults with the per-call options instead of merging them, so passing any per-call option silently drops every global default that the call does not restate, including temporal protections such as token expiration and maximum accepted token age. A token signed this way carries no expiration claim and never expires, and verification stops enforcing a configured maximum age, so stale or never-expiring tokens are accepted. The route-level decorators for signing and verifying already merge options and are not affected. The issue is fixed in @fastify/jwt 10.2.5, and users should upgrade to 10.2.5 or later. |
| @fastify/oauth2 is a Fastify wrapper for OAuth2 login flows. In versions 7.2.0 through 8.3.1, the state and code-verifier cookies are set without a Path attribute at a login route with two or more path segments, while the clearing step at the OAuth callback writes them with a root path, so the original cookies survive the callback and the documented single-use guarantee for the state value does not hold. A state value an attacker learns stays valid for the rest of the browser session, letting the attacker drive their own authorization flow in the victim's browser and sign the victim in to the attacker's account (login CSRF). The issue is fixed in @fastify/oauth2 8.3.2, and users should upgrade to 8.3.2 or later. As a workaround, set an explicit cookie path so the set and the clear name the same cookie. |
| Netskope is notified about a potential gap in its agent (NSClient) where a system with Netskope Client while connecting to an access point with Captive Portal switches to a Network which already has internet connectivity, the Captive Portal does not close. This allows the possibility of abuse via the Captive Portal using a rogue access point to either access malicious sites or exfiltrate data.The issue impacts all versions prior to R142 |
| Tokens associated with user sessions are not revoked when the corresponding user session is terminated, unless another SSO request is initiated. This occurs when the session-bound token feature is enabled with token binding validation and the "Revoke token upon user logout" option is not active. The software fails to automatically invalidate session-bound tokens upon user session termination.
This vulnerability exists when token binding validation is enabled. As a result, a malicious actor possessing a valid session-bound token could exploit this condition to maintain unauthorized access to applications and resources even after the associated user session has ended, potentially leading to the exposure of sensitive user data. |
