| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix info-leak on partial LZNT decompress in ni_read_frame()
ni_read_frame() decompresses an LZNT $DATA frame into the vmapped target
pages and then trusts decompress_lznt()'s return value:
unc_size = decompress_lznt(frame_ondisk, ondisk_size, frame_mem,
frame_size);
if ((ssize_t)unc_size < 0) err = unc_size;
else if (!unc_size || unc_size > frame_size) err = -EINVAL;
decompress_lznt() stops as soon as the compressed stream is exhausted
(e.g. a zero chunk header) and returns the number of bytes it actually
wrote, which may be far less than frame_size. The bytes between unc_size
and frame_size are never written. The only memset() that follows zeroes
the region beyond i_valid; when the frame lies entirely within the file's
valid size that memset() does not run, so the gap retains whatever was in
the just-vmapped pages. All pages are then marked uptodate and returned
to userspace, disclosing uninitialized (recently-freed) kernel page
memory. A crafted compressed file whose stream decompresses to only a few
bytes leaks the remainder of every frame on a plain read(2), which is
enough to recover kernel pointers and defeat KASLR.
Zero the [unc_size, frame_size) tail immediately after a successful LZNT
decompress so the remainder reads back as zero. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: omapfb: panel-dsi-cm: initialize lock before registering display
dsicm_probe() registers the display before initializing ddata->lock.
Once omapdss_register_display() publishes the display, another consumer
can reach a dsicm callback that takes this mutex while it is still
uninitialized.
Initialize the mutex before registering the display so the published
callbacks always see a valid lock. |
| In the Linux kernel, the following vulnerability has been resolved:
hsi: omap_ssi_core: fix missing DMA mask setup for SSI controller device
The OMAP SSI driver uses a synthetic HSI controller device allocated via
hsi_alloc_controller(), which does not go through the normal OF/platform
device initialization path.
As a result, the embedded struct device does not have a DMA mask
initialized by default.
After recent DMA API hardening changes, dma_map_sg() and related helpers
now require a valid dma_mask to be present, otherwise the driver may
crash or trigger warnings when attempting DMA mapping operations.
Fix this by explicitly initializing the DMA mask for the SSI controller
device and setting a 32-bit DMA mask, which matches the hardware
capabilities. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Propagate partial completion length across ERP recovery
dasd_default_erp_postaction() copies the timing and device state from
the finished ERP request back to the original request but drops
proc_bytes. A request that was partially completed, an ESE read of a
not-yet-allocated track returns fewer bytes than requested, and then
recovered through the ERP chain loses its partial-completion length.
__dasd_cleanup_cqr() then sees proc_bytes == 0 and completes the whole
request instead of requeueing the remainder, silently returning zeroed
data for the part that was never read.
Carry proc_bytes over to the original request like the other
per-request state. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: FCP: do not copy out an uninitialised init response
fcp_ioctl_init() allocates its response buffer with kmalloc() and copies
the whole buffer back to userspace:
buf_size = init.step0_resp_size + init.step2_resp_size;
void *resp __free(kfree) =
kmalloc(buf_size, GFP_KERNEL);
...
if (copy_to_user(arg->resp, resp, buf_size))
return -EFAULT;
Nothing clears the buffer, and the only writer of its leading
step0_resp_size bytes is the step-0 control transfer:
err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
FCP_USB_REQ_STEP0,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
0, private->bInterfaceNumber,
step0_resp, private->step0_resp_size);
if (err < 0)
return err;
usb_fill_control_urb() does not set URB_SHORT_NOT_OK, so a short or
zero-length data stage completes with status 0 and snd_usb_ctl_msg()
returns a small actual_length. The only check is err < 0, so a short
transfer is accepted as success.
snd_usb_ctl_msg() copies the full size back unconditionally:
buf = kmemdup(data, size, GFP_KERNEL);
...
memcpy(data, buf, size);
Bytes the device never wrote are therefore restored into resp unchanged
and copied to userspace. step0_resp_size and step2_resp_size are each
validated only to 1..255, so the caller also picks the slab cache, from
kmalloc-8 up to kmalloc-512.
On 7.2.0-rc5 (arm64), device answering step 0 with a zero-length data
stage, s0 = s2 = 255:
# init_on_alloc off, no spray
step0 window [0,255): nonzero=94/255
000: 00 80 60 06 00 00 ff ff 18 00 00 00 57 01 ea 01
010: 08 78 22 13 00 00 ff ff a8 c4 5f 80 00 80 ff ff
# same kernel, kmalloc-512 pre-seeded with an 8-byte tag
step0 window [0,255): nonzero=219/255 tagbytes=232
# identical run, init_on_alloc=1
step0 window [0,255): nonzero=0/255 tagbytes=0
# all three runs
step2 window [255,510): device words matched=62/62
a8 c4 5f 80 00 80 ff ff is the little-endian kernel text address
ffff8000805fc4a8. The step-2 window is unaffected, so the disclosure is
exactly the step-0 region.
Zero the buffer, and require the step-0 transfer to deliver the full
step0_resp_size bytes so a short data stage is reported as an error.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| An information leakage vulnerability exists in the Endpoint DLP component (epdlpdrv.sys) of Netskope Client for Windows prior to version R141. An internal communication channel used by the user-space hook DLL to pass messages through the kernel driver to the daemon lacked proper token-based message validation, allowing local unprivileged processes to send unauthorized queries. Additionally, a reply buffer used by the port message handler was not properly initialized before returning data, leaking residual kernel pool memory from prior allocations. A local unprivileged attacker could exploit this vulnerability to enumerate DLP configuration and feature flags, extract live session tokens, and read kernel memory fragments from other users' operations. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: ensure nfsd_file_do_acquire() does not use a non-opened file
->atomic_open is permitted to return success without actually opening
the file. It indicates this by calling finish_no_open().
This means dentry_create() can return a file which hasn't been opened.
This is extremely unlikely as ->atomic_open handlers typically
use finish_no_open() only for already existing files, and dentry_create()
isn't called in that case, and the parent being locked should prevent
races.
However out of an abundance of caution it seems wise to teach nfsd to
only use the file returned by dentry_create() if FMODE_OPENED is set,
indicating that it has in fact been opened. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: adi: initialize the lock before enabling interrupts
adi_i3c_master_probe() requests the IRQ and unmasks REG_IRQ_PENDING_CMDR
before the controller's IBI state, transfer queue list and transfer
queue lock are initialized. A pending CMDR interrupt can therefore run
adi_i3c_master_irq() and take master->xferqueue.lock before the dynamic
lock has been initialized.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the probe ordering and the IRQ path
adi_i3c_master_probe() -> adi_i3c_master_irq() -> xferqueue.lock, with a
pending CMDR interrupt arriving after REG_IRQ_PENDING_CMDR is unmasked.
Lockdep reported:
INFO: trying to register non-static key.
you didn't initialize this object before use?
lock_acquire+0xbb/0x290
_raw_spin_lock_irqsave+0x36/0x60
adi_i3c_master_irq+0x32/0x56 [vuln_msv]
adi_i3c_master_probe+0x5a/0xf47 [vuln_msv]
Initialize the transfer queue and IBI state before requesting and
unmasking the IRQ. |
| Use of uninitialized resource in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Skip Update HDCP Config In Transition State
Transition state does not have a valid dm_stream_ctx that should skip
configuring HDCP routine. The routine is valid to go through only when
a valid stream is created. |
| ws is an open source WebSocket client and server for Node.js. Prior to 8.20.1, the websocket.close() implementation is vulnerable to uninitialized memory disclosure when a TypedArray is passed as the reason argument. This vulnerability is fixed in 8.20.1. |
| Use of uninitialized resource in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. |
| Uninitialized resource in Codecs in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to read memory inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Use of uninitialized resource in Microsoft Office allows an unauthorized attacker to disclose information over a network. |
| Use of uninitialized resource in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. |
| Uninitialized resource in Media in Google Chrome prior to 153.0.8010.36 allowed a remote attacker who had compromised the renderer process to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in an LDAP Query ('LDAP Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to script injection. |
| Uninitialized resource in WebGL in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Initialize epfile->in early to fix endpoint direction checks
When parsing endpoint descriptors, ffs_data_got_descs() generates the
eps_addrmap which contains the endpoint direction. However, epfile->in
was previously only populated in ffs_func_eps_enable() which executes
upon USB host connection. As a result, early userspace ioctls like
FUNCTIONFS_DMABUF_ATTACH that run before the host connects would see
epfile->in as 0, leading to incorrect DMA directions.
By moving the initialization to ffs_epfiles_create(), epfile->in is
accurate before userspace opens the endpoint files. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Fix register corruption from uninitialized cregs on error
compat_riscv_gpr_set() calls cregs_to_regs() unconditionally, even when
user_regset_copyin() fails. Since cregs is an uninitialized stack
variable, a copyin failure causes uninitialized stack data to be written
into the target task's pt_regs, corrupting its register state and
potentially leaking kernel stack contents.
compat_restore_sigcontext() has the same issue: it calls cregs_to_regs()
even when __copy_from_user() fails, leading to the same corruption of
the signal-returning task's register state on error.
Only call cregs_to_regs() when the user copy succeeds. |
