| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
serial: mctrl_gpio: split disable_ms into sync and no_sync APIs
The following splat has been observed on a SAMA5D27 platform using
atmel_serial:
BUG: sleeping function called from invalid context at kernel/irq/manage.c:738
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 27, name: kworker/u5:0
preempt_count: 1, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
hardirqs last enabled at (0): [<00000000>] 0x0
hardirqs last disabled at (0): [<c01588f0>] copy_process+0x1c4c/0x7bec
softirqs last enabled at (0): [<c0158944>] copy_process+0x1ca0/0x7bec
softirqs last disabled at (0): [<00000000>] 0x0
CPU: 0 UID: 0 PID: 27 Comm: kworker/u5:0 Not tainted 6.13.0-rc7+ #74
Hardware name: Atmel SAMA5
Workqueue: hci0 hci_power_on [bluetooth]
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x44/0x70
dump_stack_lvl from __might_resched+0x38c/0x598
__might_resched from disable_irq+0x1c/0x48
disable_irq from mctrl_gpio_disable_ms+0x74/0xc0
mctrl_gpio_disable_ms from atmel_disable_ms.part.0+0x80/0x1f4
atmel_disable_ms.part.0 from atmel_set_termios+0x764/0x11e8
atmel_set_termios from uart_change_line_settings+0x15c/0x994
uart_change_line_settings from uart_set_termios+0x2b0/0x668
uart_set_termios from tty_set_termios+0x600/0x8ec
tty_set_termios from ttyport_set_flow_control+0x188/0x1e0
ttyport_set_flow_control from wilc_setup+0xd0/0x524 [hci_wilc]
wilc_setup [hci_wilc] from hci_dev_open_sync+0x330/0x203c [bluetooth]
hci_dev_open_sync [bluetooth] from hci_dev_do_open+0x40/0xb0 [bluetooth]
hci_dev_do_open [bluetooth] from hci_power_on+0x12c/0x664 [bluetooth]
hci_power_on [bluetooth] from process_one_work+0x998/0x1a38
process_one_work from worker_thread+0x6e0/0xfb4
worker_thread from kthread+0x3d4/0x484
kthread from ret_from_fork+0x14/0x28
This warning is emitted when trying to toggle, at the highest level,
some flow control (with serdev_device_set_flow_control) in a device
driver. At the lowest level, the atmel_serial driver is using
serial_mctrl_gpio lib to enable/disable the corresponding IRQs
accordingly. The warning emitted by CONFIG_DEBUG_ATOMIC_SLEEP is due to
disable_irq (called in mctrl_gpio_disable_ms) being possibly called in
some atomic context (some tty drivers perform modem lines configuration
in regions protected by port lock).
Split mctrl_gpio_disable_ms into two differents APIs, a non-blocking one
and a blocking one. Replace mctrl_gpio_disable_ms calls with the
relevant version depending on whether the call is protected by some port
lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Avoid WARN_ON when configuring MQPRIO with HTB offload enabled
When attempting to enable MQPRIO while HTB offload is already
configured, the driver currently returns `-EINVAL` and triggers a
`WARN_ON`, leading to an unnecessary call trace.
Update the code to handle this case more gracefully by returning
`-EOPNOTSUPP` instead, while also providing a helpful user message. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: Annotate FDB data races
The 'used' and 'updated' fields in the FDB entry structure can be
accessed concurrently by multiple threads, leading to reports such as
[1]. Can be reproduced using [2].
Suppress these reports by annotating these accesses using
READ_ONCE() / WRITE_ONCE().
[1]
BUG: KCSAN: data-race in vxlan_xmit / vxlan_xmit
write to 0xffff942604d263a8 of 8 bytes by task 286 on cpu 0:
vxlan_xmit+0xb29/0x2380
dev_hard_start_xmit+0x84/0x2f0
__dev_queue_xmit+0x45a/0x1650
packet_xmit+0x100/0x150
packet_sendmsg+0x2114/0x2ac0
__sys_sendto+0x318/0x330
__x64_sys_sendto+0x76/0x90
x64_sys_call+0x14e8/0x1c00
do_syscall_64+0x9e/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffff942604d263a8 of 8 bytes by task 287 on cpu 2:
vxlan_xmit+0xadf/0x2380
dev_hard_start_xmit+0x84/0x2f0
__dev_queue_xmit+0x45a/0x1650
packet_xmit+0x100/0x150
packet_sendmsg+0x2114/0x2ac0
__sys_sendto+0x318/0x330
__x64_sys_sendto+0x76/0x90
x64_sys_call+0x14e8/0x1c00
do_syscall_64+0x9e/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x00000000fffbac6e -> 0x00000000fffbac6f
Reported by Kernel Concurrency Sanitizer on:
CPU: 2 UID: 0 PID: 287 Comm: mausezahn Not tainted 6.13.0-rc7-01544-gb4b270f11a02 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
[2]
#!/bin/bash
set +H
echo whitelist > /sys/kernel/debug/kcsan
echo !vxlan_xmit > /sys/kernel/debug/kcsan
ip link add name vx0 up type vxlan id 10010 dstport 4789 local 192.0.2.1
bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 198.51.100.1
taskset -c 0 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q &
taskset -c 2 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q & |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Refactor remove call with idxd_cleanup() helper
The idxd_cleanup() helper cleans up perfmon, interrupts, internals and
so on. Refactor remove call with the idxd_cleanup() helper to avoid code
duplication. Note, this also fixes the missing put_device() for idxd
groups, enginces and wqs. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: disable napi on driver removal
A warning on driver removal started occurring after commit 9dd05df8403b
("net: warn if NAPI instance wasn't shut down"). Disable tx napi before
deleting it in mt76_dma_cleanup().
WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100
CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy)
Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024
RIP: 0010:__netif_napi_del_locked+0xf0/0x100
Call Trace:
<TASK>
mt76_dma_cleanup+0x54/0x2f0 [mt76]
mt7921_pci_remove+0xd5/0x190 [mt7921e]
pci_device_remove+0x47/0xc0
device_release_driver_internal+0x19e/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x6d/0xf0
pci_unregister_driver+0x2e/0xb0
__do_sys_delete_module.isra.0+0x197/0x2e0
do_syscall_64+0x7b/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Tested with mt7921e but the same pattern can be actually applied to other
mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled
in their *_dma_init() functions and only toggled off and on again inside
their suspend/resume/reset paths. So it should be okay to disable tx
napi in such a generic way.
Found by Linux Verification Center (linuxtesting.org). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: class: Invalidate USB device pointers on partner unregistration
To avoid using invalid USB device pointers after a Type-C partner
disconnects, this patch clears the pointers upon partner unregistration.
This ensures a clean state for future connections. |
| In the Linux kernel, the following vulnerability has been resolved:
block: integrity: Do not call set_page_dirty_lock()
Placing multiple protection information buffers inside the same page
can lead to oopses because set_page_dirty_lock() can't be called from
interrupt context.
Since a protection information buffer is not backed by a file there is
no point in setting its page dirty, there is nothing to synchronize.
Drop the call to set_page_dirty_lock() and remove the last argument to
bio_integrity_unpin_bvec(). |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: bpf: Only mitigate cBPF programs loaded by unprivileged users
Support for eBPF programs loaded by unprivileged users is typically
disabled. This means only cBPF programs need to be mitigated for BHB.
In addition, only mitigate cBPF programs that were loaded by an
unprivileged user. Privileged users can also load the same program
via eBPF, making the mitigation pointless. |
| In the Linux kernel, the following vulnerability has been resolved:
memblock: Accept allocated memory before use in memblock_double_array()
When increasing the array size in memblock_double_array() and the slab
is not yet available, a call to memblock_find_in_range() is used to
reserve/allocate memory. However, the range returned may not have been
accepted, which can result in a crash when booting an SNP guest:
RIP: 0010:memcpy_orig+0x68/0x130
Code: ...
RSP: 0000:ffffffff9cc03ce8 EFLAGS: 00010006
RAX: ff11001ff83e5000 RBX: 0000000000000000 RCX: fffffffffffff000
RDX: 0000000000000bc0 RSI: ffffffff9dba8860 RDI: ff11001ff83e5c00
RBP: 0000000000002000 R08: 0000000000000000 R09: 0000000000002000
R10: 000000207fffe000 R11: 0000040000000000 R12: ffffffff9d06ef78
R13: ff11001ff83e5000 R14: ffffffff9dba7c60 R15: 0000000000000c00
memblock_double_array+0xff/0x310
memblock_add_range+0x1fb/0x2f0
memblock_reserve+0x4f/0xa0
memblock_alloc_range_nid+0xac/0x130
memblock_alloc_internal+0x53/0xc0
memblock_alloc_try_nid+0x3d/0xa0
swiotlb_init_remap+0x149/0x2f0
mem_init+0xb/0xb0
mm_core_init+0x8f/0x350
start_kernel+0x17e/0x5d0
x86_64_start_reservations+0x14/0x30
x86_64_start_kernel+0x92/0xa0
secondary_startup_64_no_verify+0x194/0x19b
Mitigate this by calling accept_memory() on the memory range returned
before the slab is available.
Prior to v6.12, the accept_memory() interface used a 'start' and 'end'
parameter instead of 'start' and 'size', therefore the accept_memory()
call must be adjusted to specify 'start + size' for 'end' when applying
to kernels prior to v6.12. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: bpf: Add BHB mitigation to the epilogue for cBPF programs
A malicious BPF program may manipulate the branch history to influence
what the hardware speculates will happen next.
On exit from a BPF program, emit the BHB mititgation sequence.
This is only applied for 'classic' cBPF programs that are loaded by
seccomp. |
| In the Linux kernel, the following vulnerability has been resolved:
sch_htb: make htb_qlen_notify() idempotent
htb_qlen_notify() always deactivates the HTB class and in fact could
trigger a warning if it is already deactivated. Therefore, it is not
idempotent and not friendly to its callers, like fq_codel_dequeue().
Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers'
life. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-bufio: don't schedule in atomic context
A BUG was reported as below when CONFIG_DEBUG_ATOMIC_SLEEP and
try_verify_in_tasklet are enabled.
[ 129.444685][ T934] BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2421
[ 129.444723][ T934] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 934, name: kworker/1:4
[ 129.444740][ T934] preempt_count: 201, expected: 0
[ 129.444756][ T934] RCU nest depth: 0, expected: 0
[ 129.444781][ T934] Preemption disabled at:
[ 129.444789][ T934] [<ffffffd816231900>] shrink_work+0x21c/0x248
[ 129.445167][ T934] kernel BUG at kernel/sched/walt/walt_debug.c:16!
[ 129.445183][ T934] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
[ 129.445204][ T934] Skip md ftrace buffer dump for: 0x1609e0
[ 129.447348][ T934] CPU: 1 PID: 934 Comm: kworker/1:4 Tainted: G W OE 6.6.56-android15-8-o-g6f82312b30b9-debug #1 1400000003000000474e5500b3187743670464e8
[ 129.447362][ T934] Hardware name: Qualcomm Technologies, Inc. Parrot QRD, Alpha-M (DT)
[ 129.447373][ T934] Workqueue: dm_bufio_cache shrink_work
[ 129.447394][ T934] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 129.447406][ T934] pc : android_rvh_schedule_bug+0x0/0x8 [sched_walt_debug]
[ 129.447435][ T934] lr : __traceiter_android_rvh_schedule_bug+0x44/0x6c
[ 129.447451][ T934] sp : ffffffc0843dbc90
[ 129.447459][ T934] x29: ffffffc0843dbc90 x28: ffffffffffffffff x27: 0000000000000c8b
[ 129.447479][ T934] x26: 0000000000000040 x25: ffffff804b3d6260 x24: ffffffd816232b68
[ 129.447497][ T934] x23: ffffff805171c5b4 x22: 0000000000000000 x21: ffffffd816231900
[ 129.447517][ T934] x20: ffffff80306ba898 x19: 0000000000000000 x18: ffffffc084159030
[ 129.447535][ T934] x17: 00000000d2b5dd1f x16: 00000000d2b5dd1f x15: ffffffd816720358
[ 129.447554][ T934] x14: 0000000000000004 x13: ffffff89ef978000 x12: 0000000000000003
[ 129.447572][ T934] x11: ffffffd817a823c4 x10: 0000000000000202 x9 : 7e779c5735de9400
[ 129.447591][ T934] x8 : ffffffd81560d004 x7 : 205b5d3938373434 x6 : ffffffd8167397c8
[ 129.447610][ T934] x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffffffc0843db9e0
[ 129.447629][ T934] x2 : 0000000000002f15 x1 : 0000000000000000 x0 : 0000000000000000
[ 129.447647][ T934] Call trace:
[ 129.447655][ T934] android_rvh_schedule_bug+0x0/0x8 [sched_walt_debug 1400000003000000474e550080cce8a8a78606b6]
[ 129.447681][ T934] __might_resched+0x190/0x1a8
[ 129.447694][ T934] shrink_work+0x180/0x248
[ 129.447706][ T934] process_one_work+0x260/0x624
[ 129.447718][ T934] worker_thread+0x28c/0x454
[ 129.447729][ T934] kthread+0x118/0x158
[ 129.447742][ T934] ret_from_fork+0x10/0x20
[ 129.447761][ T934] Code: ???????? ???????? ???????? d2b5dd1f (d4210000)
[ 129.447772][ T934] ---[ end trace 0000000000000000 ]---
dm_bufio_lock will call spin_lock_bh when try_verify_in_tasklet
is enabled, and __scan will be called in atomic context. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix error handling path in bnxt_init_chip()
WARN_ON() is triggered in __flush_work() if bnxt_init_chip() fails
because we call cancel_work_sync() on dim work that has not been
initialized.
WARNING: CPU: 37 PID: 5223 at kernel/workqueue.c:4201 __flush_work.isra.0+0x212/0x230
The driver relies on the BNXT_STATE_NAPI_DISABLED bit to check if dim
work has already been cancelled. But in the bnxt_open() path,
BNXT_STATE_NAPI_DISABLED is not set and this causes the error
path to think that it needs to cancel the uninitalized dim work.
Fix it by setting BNXT_STATE_NAPI_DISABLED during initialization.
The bit will be cleared when we enable NAPI and initialize dim work. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: ops: Consistently treat platform_max as control value
This reverts commit 9bdd10d57a88 ("ASoC: ops: Shift tested values in
snd_soc_put_volsw() by +min"), and makes some additional related
updates.
There are two ways the platform_max could be interpreted; the maximum
register value, or the maximum value the control can be set to. The
patch moved from treating the value as a control value to a register
one. When the patch was applied it was technically correct as
snd_soc_limit_volume() also used the register interpretation. However,
even then most of the other usages treated platform_max as a
control value, and snd_soc_limit_volume() has since been updated to
also do so in commit fb9ad24485087 ("ASoC: ops: add correct range
check for limiting volume"). That patch however, missed updating
snd_soc_put_volsw() back to the control interpretation, and fixing
snd_soc_info_volsw_range(). The control interpretation makes more
sense as limiting is typically done from the machine driver, so it is
appropriate to use the customer facing representation rather than the
internal codec representation. Update all the code to consistently use
this interpretation of platform_max.
Finally, also add some comments to the soc_mixer_control struct to
hopefully avoid further patches switching between the two approaches. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Clear iommu-dma ops on cleanup
If iommu_device_register() encounters an error, it can end up tearing
down already-configured groups and default domains, however this
currently still leaves devices hooked up to iommu-dma (and even
historically the behaviour in this area was at best inconsistent across
architectures/drivers...) Although in the case that an IOMMU is present
whose driver has failed to probe, users cannot necessarily expect DMA to
work anyway, it's still arguable that we should do our best to put
things back as if the IOMMU driver was never there at all, and certainly
the potential for crashing in iommu-dma itself is undesirable. Make sure
we clean up the dev->dma_iommu flag along with everything else. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: fix PTM cycle trigger logic
Writing to clear the PTM status 'valid' bit while the PTM cycle is
triggered results in unreliable PTM operation. To fix this, clear the
PTM 'trigger' and status after each PTM transaction.
The issue can be reproduced with the following:
$ sudo phc2sys -R 1000 -O 0 -i tsn0 -m
Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to
quickly reproduce the issue.
PHC2SYS exits with:
"ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction
fails
This patch also fixes a hang in igc_probe() when loading the igc
driver in the kdump kernel on systems supporting PTM.
The igc driver running in the base kernel enables PTM trigger in
igc_probe(). Therefore the driver is always in PTM trigger mode,
except in brief periods when manually triggering a PTM cycle.
When a crash occurs, the NIC is reset while PTM trigger is enabled.
Due to a hardware problem, the NIC is subsequently in a bad busmaster
state and doesn't handle register reads/writes. When running
igc_probe() in the kdump kernel, the first register access to a NIC
register hangs driver probing and ultimately breaks kdump.
With this patch, igc has PTM trigger disabled most of the time,
and the trigger is only enabled for very brief (10 - 100 us) periods
when manually triggering a PTM cycle. Chances that a crash occurs
during a PTM trigger are not 0, but extremely reduced. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Silence oversized kvmalloc() warning
syzkaller triggered an oversized kvmalloc() warning.
Silence it by adding __GFP_NOWARN.
syzkaller log:
WARNING: CPU: 7 PID: 518 at mm/util.c:665 __kvmalloc_node_noprof+0x175/0x180
CPU: 7 UID: 0 PID: 518 Comm: c_repro Not tainted 6.11.0-rc6+ #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:__kvmalloc_node_noprof+0x175/0x180
RSP: 0018:ffffc90001e67c10 EFLAGS: 00010246
RAX: 0000000000000100 RBX: 0000000000000400 RCX: ffffffff8149d46b
RDX: 0000000000000000 RSI: ffff8881030fae80 RDI: 0000000000000002
RBP: 000000712c800000 R08: 0000000000000100 R09: 0000000000000000
R10: ffffc90001e67c10 R11: 0030ae0601000000 R12: 0000000000000000
R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000
FS: 00007fde79159740(0000) GS:ffff88813bdc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000180 CR3: 0000000105eb4005 CR4: 00000000003706b0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ib_umem_odp_get+0x1f6/0x390
mlx5_ib_reg_user_mr+0x1e8/0x450
ib_uverbs_reg_mr+0x28b/0x440
ib_uverbs_write+0x7d3/0xa30
vfs_write+0x1ac/0x6c0
ksys_write+0x134/0x170
? __sanitizer_cov_trace_pc+0x1c/0x50
do_syscall_64+0x50/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fsl-qspi: use devm function instead of driver remove
Driver use devm APIs to manage clk/irq/resources and register the spi
controller, but the legacy remove function will be called first during
device detach and trigger kernel panic. Drop the remove function and use
devm_add_action_or_reset() for driver cleanup to ensure the release
sequence.
Trigger kernel panic on i.MX8MQ by
echo 30bb0000.spi >/sys/bus/platform/drivers/fsl-quadspi/unbind |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: remove wrong sb->s_sequence check
Journal emptiness is not determined by sb->s_sequence == 0 but rather by
sb->s_start == 0 (which is set a few lines above). Furthermore 0 is a
valid transaction ID so the check can spuriously trigger. Remove the
invalid WARN_ON. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent()
Two WARNINGs are observed when SMMU driver rolls back upon failure:
arm-smmu-v3.9.auto: Failed to register iommu
arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22
------------[ cut here ]------------
WARNING: CPU: 5 PID: 1 at kernel/dma/mapping.c:74 dmam_free_coherent+0xc0/0xd8
Call trace:
dmam_free_coherent+0xc0/0xd8 (P)
tegra241_vintf_free_lvcmdq+0x74/0x188
tegra241_cmdqv_remove_vintf+0x60/0x148
tegra241_cmdqv_remove+0x48/0xc8
arm_smmu_impl_remove+0x28/0x60
devm_action_release+0x1c/0x40
------------[ cut here ]------------
128 pages are still in use!
WARNING: CPU: 16 PID: 1 at mm/page_alloc.c:6902 free_contig_range+0x18c/0x1c8
Call trace:
free_contig_range+0x18c/0x1c8 (P)
cma_release+0x154/0x2f0
dma_free_contiguous+0x38/0xa0
dma_direct_free+0x10c/0x248
dma_free_attrs+0x100/0x290
dmam_free_coherent+0x78/0xd8
tegra241_vintf_free_lvcmdq+0x74/0x160
tegra241_cmdqv_remove+0x98/0x198
arm_smmu_impl_remove+0x28/0x60
devm_action_release+0x1c/0x40
This is because the LVCMDQ queue memory are managed by devres, while that
dmam_free_coherent() is called in the context of devm_action_release().
Jason pointed out that "arm_smmu_impl_probe() has mis-ordered the devres
callbacks if ops->device_remove() is going to be manually freeing things
that probe allocated":
https://lore.kernel.org/linux-iommu/20250407174408.GB1722458@nvidia.com/
In fact, tegra241_cmdqv_init_structures() only allocates memory resources
which means any failure that it generates would be similar to -ENOMEM, so
there is no point in having that "falling back to standard SMMU" routine,
as the standard SMMU would likely fail to allocate memory too.
Remove the unwind part in tegra241_cmdqv_init_structures(), and return a
proper error code to ask SMMU driver to call tegra241_cmdqv_remove() via
impl_ops->device_remove(). Then, drop tegra241_vintf_free_lvcmdq() since
devres will take care of that. |
