| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range()
Xen doesn't offer MSR_FAM10H_MMIO_CONF_BASE to all guests. This results
in the following warning:
unchecked MSR access error: RDMSR from 0xc0010058 at rIP: 0xffffffff8101d19f (xen_do_read_msr+0x7f/0xa0)
Call Trace:
xen_read_msr+0x1e/0x30
amd_get_mmconfig_range+0x2b/0x80
quirk_amd_mmconfig_area+0x28/0x100
pnp_fixup_device+0x39/0x50
__pnp_add_device+0xf/0x150
pnp_add_device+0x3d/0x100
pnpacpi_add_device_handler+0x1f9/0x280
acpi_ns_get_device_callback+0x104/0x1c0
acpi_ns_walk_namespace+0x1d0/0x260
acpi_get_devices+0x8a/0xb0
pnpacpi_init+0x50/0x80
do_one_initcall+0x46/0x2e0
kernel_init_freeable+0x1da/0x2f0
kernel_init+0x16/0x1b0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
based on quirks for a "PNP0c01" device. Treating MMCFG as disabled is the
right course of action, so no change is needed there.
This was most likely exposed by fixing the Xen MSR accessors to not be
silently-safe. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: regulatory: improve invalid hints checking
Syzbot keeps reporting an issue [1] that occurs when erroneous symbols
sent from userspace get through into user_alpha2[] via
regulatory_hint_user() call. Such invalid regulatory hints should be
rejected.
While a sanity check from commit 47caf685a685 ("cfg80211: regulatory:
reject invalid hints") looks to be enough to deter these very cases,
there is a way to get around it due to 2 reasons.
1) The way isalpha() works, symbols other than latin lower and
upper letters may be used to determine a country/domain.
For instance, greek letters will also be considered upper/lower
letters and for such characters isalpha() will return true as well.
However, ISO-3166-1 alpha2 codes should only hold latin
characters.
2) While processing a user regulatory request, between
reg_process_hint_user() and regulatory_hint_user() there happens to
be a call to queue_regulatory_request() which modifies letters in
request->alpha2[] with toupper(). This works fine for latin symbols,
less so for weird letter characters from the second part of _ctype[].
Syzbot triggers a warning in is_user_regdom_saved() by first sending
over an unexpected non-latin letter that gets malformed by toupper()
into a character that ends up failing isalpha() check.
Prevent this by enhancing is_an_alpha2() to ensure that incoming
symbols are latin letters and nothing else.
[1] Syzbot report:
------------[ cut here ]------------
Unexpected user alpha2: A�
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 is_user_regdom_saved net/wireless/reg.c:440 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_alpha2 net/wireless/reg.c:3424 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
Modules linked in:
CPU: 1 UID: 0 PID: 964 Comm: kworker/1:2 Not tainted 6.12.0-rc5-syzkaller-00044-gc1e939a21eb1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events_power_efficient crda_timeout_work
RIP: 0010:is_user_regdom_saved net/wireless/reg.c:440 [inline]
RIP: 0010:restore_alpha2 net/wireless/reg.c:3424 [inline]
RIP: 0010:restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
...
Call Trace:
<TASK>
crda_timeout_work+0x27/0x50 net/wireless/reg.c:542
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f2/0x390 kernel/kthread.c:389
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
mm: memory-failure: update ttu flag inside unmap_poisoned_folio
Patch series "mm: memory_failure: unmap poisoned folio during migrate
properly", v3.
Fix two bugs during folio migration if the folio is poisoned.
This patch (of 3):
Commit 6da6b1d4a7df ("mm/hwpoison: convert TTU_IGNORE_HWPOISON to
TTU_HWPOISON") introduce TTU_HWPOISON to replace TTU_IGNORE_HWPOISON in
order to stop send SIGBUS signal when accessing an error page after a
memory error on a clean folio. However during page migration, anon folio
must be set with TTU_HWPOISON during unmap_*(). For pagecache we need
some policy just like the one in hwpoison_user_mappings to set this flag.
So move this policy from hwpoison_user_mappings to unmap_poisoned_folio to
handle this warning properly.
Warning will be produced during unamp poison folio with the following log:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 365 at mm/rmap.c:1847 try_to_unmap_one+0x8fc/0xd3c
Modules linked in:
CPU: 1 UID: 0 PID: 365 Comm: bash Tainted: G W 6.13.0-rc1-00018-gacdb4bbda7ab #42
Tainted: [W]=WARN
Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : try_to_unmap_one+0x8fc/0xd3c
lr : try_to_unmap_one+0x3dc/0xd3c
Call trace:
try_to_unmap_one+0x8fc/0xd3c (P)
try_to_unmap_one+0x3dc/0xd3c (L)
rmap_walk_anon+0xdc/0x1f8
rmap_walk+0x3c/0x58
try_to_unmap+0x88/0x90
unmap_poisoned_folio+0x30/0xa8
do_migrate_range+0x4a0/0x568
offline_pages+0x5a4/0x670
memory_block_action+0x17c/0x374
memory_subsys_offline+0x3c/0x78
device_offline+0xa4/0xd0
state_store+0x8c/0xf0
dev_attr_store+0x18/0x2c
sysfs_kf_write+0x44/0x54
kernfs_fop_write_iter+0x118/0x1a8
vfs_write+0x3a8/0x4bc
ksys_write+0x6c/0xf8
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x44/0x100
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x30/0xd0
el0t_64_sync_handler+0xc8/0xcc
el0t_64_sync+0x198/0x19c
---[ end trace 0000000000000000 ]---
[mawupeng1@huawei.com: unmap_poisoned_folio(): remove shadowed local `mapping', per Miaohe] |
| In the Linux kernel, the following vulnerability has been resolved:
uprobes: Reject the shared zeropage in uprobe_write_opcode()
We triggered the following crash in syzkaller tests:
BUG: Bad page state in process syz.7.38 pfn:1eff3
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1eff3
flags: 0x3fffff00004004(referenced|reserved|node=0|zone=1|lastcpupid=0x1fffff)
raw: 003fffff00004004 ffffe6c6c07bfcc8 ffffe6c6c07bfcc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000fffffffe 0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
bad_page+0x69/0xf0
free_unref_page_prepare+0x401/0x500
free_unref_page+0x6d/0x1b0
uprobe_write_opcode+0x460/0x8e0
install_breakpoint.part.0+0x51/0x80
register_for_each_vma+0x1d9/0x2b0
__uprobe_register+0x245/0x300
bpf_uprobe_multi_link_attach+0x29b/0x4f0
link_create+0x1e2/0x280
__sys_bpf+0x75f/0xac0
__x64_sys_bpf+0x1a/0x30
do_syscall_64+0x56/0x100
entry_SYSCALL_64_after_hwframe+0x78/0xe2
BUG: Bad rss-counter state mm:00000000452453e0 type:MM_FILEPAGES val:-1
The following syzkaller test case can be used to reproduce:
r2 = creat(&(0x7f0000000000)='./file0\x00', 0x8)
write$nbd(r2, &(0x7f0000000580)=ANY=[], 0x10)
r4 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x42, 0x0)
mmap$IORING_OFF_SQ_RING(&(0x7f0000ffd000/0x3000)=nil, 0x3000, 0x0, 0x12, r4, 0x0)
r5 = userfaultfd(0x80801)
ioctl$UFFDIO_API(r5, 0xc018aa3f, &(0x7f0000000040)={0xaa, 0x20})
r6 = userfaultfd(0x80801)
ioctl$UFFDIO_API(r6, 0xc018aa3f, &(0x7f0000000140))
ioctl$UFFDIO_REGISTER(r6, 0xc020aa00, &(0x7f0000000100)={{&(0x7f0000ffc000/0x4000)=nil, 0x4000}, 0x2})
ioctl$UFFDIO_ZEROPAGE(r5, 0xc020aa04, &(0x7f0000000000)={{&(0x7f0000ffd000/0x1000)=nil, 0x1000}})
r7 = bpf$PROG_LOAD(0x5, &(0x7f0000000140)={0x2, 0x3, &(0x7f0000000200)=ANY=[@ANYBLOB="1800000000120000000000000000000095"], &(0x7f0000000000)='GPL\x00', 0x7, 0x0, 0x0, 0x0, 0x0, '\x00', 0x0, @fallback=0x30, 0xffffffffffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x10, 0x0, @void, @value}, 0x94)
bpf$BPF_LINK_CREATE_XDP(0x1c, &(0x7f0000000040)={r7, 0x0, 0x30, 0x1e, @val=@uprobe_multi={&(0x7f0000000080)='./file0\x00', &(0x7f0000000100)=[0x2], 0x0, 0x0, 0x1}}, 0x40)
The cause is that zero pfn is set to the PTE without increasing the RSS
count in mfill_atomic_pte_zeropage() and the refcount of zero folio does
not increase accordingly. Then, the operation on the same pfn is performed
in uprobe_write_opcode()->__replace_page() to unconditional decrease the
RSS count and old_folio's refcount.
Therefore, two bugs are introduced:
1. The RSS count is incorrect, when process exit, the check_mm() report
error "Bad rss-count".
2. The reserved folio (zero folio) is freed when folio->refcount is zero,
then free_pages_prepare->free_page_is_bad() report error
"Bad page state".
There is more, the following warning could also theoretically be triggered:
__replace_page()
-> ...
-> folio_remove_rmap_pte()
-> VM_WARN_ON_FOLIO(is_zero_folio(folio), folio)
Considering that uprobe hit on the zero folio is a very rare case, just
reject zero old folio immediately after get_user_page_vma_remote().
[ mingo: Cleaned up the changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/userptr: fix EFAULT handling
Currently we treat EFAULT from hmm_range_fault() as a non-fatal error
when called from xe_vm_userptr_pin() with the idea that we want to avoid
killing the entire vm and chucking an error, under the assumption that
the user just did an unmap or something, and has no intention of
actually touching that memory from the GPU. At this point we have
already zapped the PTEs so any access should generate a page fault, and
if the pin fails there also it will then become fatal.
However it looks like it's possible for the userptr vma to still be on
the rebind list in preempt_rebind_work_func(), if we had to retry the
pin again due to something happening in the caller before we did the
rebind step, but in the meantime needing to re-validate the userptr and
this time hitting the EFAULT.
This explains an internal user report of hitting:
[ 191.738349] WARNING: CPU: 1 PID: 157 at drivers/gpu/drm/xe/xe_res_cursor.h:158 xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe]
[ 191.738551] Workqueue: xe-ordered-wq preempt_rebind_work_func [xe]
[ 191.738616] RIP: 0010:xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe]
[ 191.738690] Call Trace:
[ 191.738692] <TASK>
[ 191.738694] ? show_regs+0x69/0x80
[ 191.738698] ? __warn+0x93/0x1a0
[ 191.738703] ? xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe]
[ 191.738759] ? report_bug+0x18f/0x1a0
[ 191.738764] ? handle_bug+0x63/0xa0
[ 191.738767] ? exc_invalid_op+0x19/0x70
[ 191.738770] ? asm_exc_invalid_op+0x1b/0x20
[ 191.738777] ? xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe]
[ 191.738834] ? ret_from_fork_asm+0x1a/0x30
[ 191.738849] bind_op_prepare+0x105/0x7b0 [xe]
[ 191.738906] ? dma_resv_reserve_fences+0x301/0x380
[ 191.738912] xe_pt_update_ops_prepare+0x28c/0x4b0 [xe]
[ 191.738966] ? kmemleak_alloc+0x4b/0x80
[ 191.738973] ops_execute+0x188/0x9d0 [xe]
[ 191.739036] xe_vm_rebind+0x4ce/0x5a0 [xe]
[ 191.739098] ? trace_hardirqs_on+0x4d/0x60
[ 191.739112] preempt_rebind_work_func+0x76f/0xd00 [xe]
Followed by NPD, when running some workload, since the sg was never
actually populated but the vma is still marked for rebind when it should
be skipped for this special EFAULT case. This is confirmed to fix the
user report.
v2 (MattB):
- Move earlier.
v3 (MattB):
- Update the commit message to make it clear that this indeed fixes the
issue.
(cherry picked from commit 6b93cb98910c826c2e2004942f8b060311e43618) |
| In the Linux kernel, the following vulnerability has been resolved:
usbnet: gl620a: fix endpoint checking in genelink_bind()
Syzbot reports [1] a warning in usb_submit_urb() triggered by
inconsistencies between expected and actually present endpoints
in gl620a driver. Since genelink_bind() does not properly
verify whether specified eps are in fact provided by the device,
in this case, an artificially manufactured one, one may get a
mismatch.
Fix the issue by resorting to a usbnet utility function
usbnet_get_endpoints(), usually reserved for this very problem.
Check for endpoints and return early before proceeding further if
any are missing.
[1] Syzbot report:
usb 5-1: Manufacturer: syz
usb 5-1: SerialNumber: syz
usb 5-1: config 0 descriptor??
gl620a 5-1:0.23 usb0: register 'gl620a' at usb-dummy_hcd.0-1, ...
------------[ cut here ]------------
usb 5-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 2 PID: 1841 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
Modules linked in:
CPU: 2 UID: 0 PID: 1841 Comm: kworker/2:2 Not tainted 6.12.0-syzkaller-07834-g06afb0f36106 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: mld mld_ifc_work
RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
...
Call Trace:
<TASK>
usbnet_start_xmit+0x6be/0x2780 drivers/net/usb/usbnet.c:1467
__netdev_start_xmit include/linux/netdevice.h:5002 [inline]
netdev_start_xmit include/linux/netdevice.h:5011 [inline]
xmit_one net/core/dev.c:3590 [inline]
dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3606
sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343
__dev_xmit_skb net/core/dev.c:3827 [inline]
__dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4400
dev_queue_xmit include/linux/netdevice.h:3168 [inline]
neigh_resolve_output net/core/neighbour.c:1514 [inline]
neigh_resolve_output+0x5bc/0x950 net/core/neighbour.c:1494
neigh_output include/net/neighbour.h:539 [inline]
ip6_finish_output2+0xb1b/0x2070 net/ipv6/ip6_output.c:141
__ip6_finish_output net/ipv6/ip6_output.c:215 [inline]
ip6_finish_output+0x3f9/0x1360 net/ipv6/ip6_output.c:226
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x1f8/0x540 net/ipv6/ip6_output.c:247
dst_output include/net/dst.h:450 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
mld_sendpack+0x9f0/0x11d0 net/ipv6/mcast.c:1819
mld_send_cr net/ipv6/mcast.c:2120 [inline]
mld_ifc_work+0x740/0xca0 net/ipv6/mcast.c:2651
process_one_work+0x9c5/0x1ba0 kernel/workqueue.c:3229
process_scheduled_works kernel/workqueue.c:3310 [inline]
worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
efi: Don't map the entire mokvar table to determine its size
Currently, when validating the mokvar table, we (re)map the entire table
on each iteration of the loop, adding space as we discover new entries.
If the table grows over a certain size, this fails due to limitations of
early_memmap(), and we get a failure and traceback:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:139 __early_ioremap+0xef/0x220
...
Call Trace:
<TASK>
? __early_ioremap+0xef/0x220
? __warn.cold+0x93/0xfa
? __early_ioremap+0xef/0x220
? report_bug+0xff/0x140
? early_fixup_exception+0x5d/0xb0
? early_idt_handler_common+0x2f/0x3a
? __early_ioremap+0xef/0x220
? efi_mokvar_table_init+0xce/0x1d0
? setup_arch+0x864/0xc10
? start_kernel+0x6b/0xa10
? x86_64_start_reservations+0x24/0x30
? x86_64_start_kernel+0xed/0xf0
? common_startup_64+0x13e/0x141
</TASK>
---[ end trace 0000000000000000 ]---
mokvar: Failed to map EFI MOKvar config table pa=0x7c4c3000, size=265187.
Mapping the entire structure isn't actually necessary, as we don't ever
need more than one entry header mapped at once.
Changes efi_mokvar_table_init() to only map each entry header, not the
entire table, when determining the table size. Since we're not mapping
any data past the variable name, it also changes the code to enforce
that each variable name is NUL terminated, rather than attempting to
verify it in place. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: avoid holding freeze_mutex during mmap operation
We use map->freeze_mutex to prevent races between map_freeze() and
memory mapping BPF map contents with writable permissions. The way we
naively do this means we'll hold freeze_mutex for entire duration of all
the mm and VMA manipulations, which is completely unnecessary. This can
potentially also lead to deadlocks, as reported by syzbot in [0].
So, instead, hold freeze_mutex only during writeability checks, bump
(proactively) "write active" count for the map, unlock the mutex and
proceed with mmap logic. And only if something went wrong during mmap
logic, then undo that "write active" counter increment.
[0] https://lore.kernel.org/bpf/678dcbc9.050a0220.303755.0066.GAE@google.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: core: flush gadget workqueue after device removal
device_del() can lead to new work being scheduled in gadget->work
workqueue. This is observed, for example, with the dwc3 driver with the
following call stack:
device_del()
gadget_unbind_driver()
usb_gadget_disconnect_locked()
dwc3_gadget_pullup()
dwc3_gadget_soft_disconnect()
usb_gadget_set_state()
schedule_work(&gadget->work)
Move flush_work() after device_del() to ensure the workqueue is cleaned
up. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Avoid putting some root ports into D3 on TUXEDO Sirius Gen1
commit 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") sets the
policy that all PCIe ports are allowed to use D3. When the system is
suspended if the port is not power manageable by the platform and won't be
used for wakeup via a PME this sets up the policy for these ports to go
into D3hot.
This policy generally makes sense from an OSPM perspective but it leads to
problems with wakeup from suspend on the TUXEDO Sirius 16 Gen 1 with a
specific old BIOS. This manifests as a system hang.
On the affected Device + BIOS combination, add a quirk for the root port of
the problematic controller to ensure that these root ports are not put into
D3hot at suspend.
This patch is based on
https://lore.kernel.org/linux-pci/20230708214457.1229-2-mario.limonciello@amd.com
but with the added condition both in the documentation and in the code to
apply only to the TUXEDO Sirius 16 Gen 1 with a specific old BIOS and only
the affected root ports. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/osnoise: Fix resetting of tracepoints
If a timerlat tracer is started with the osnoise option OSNOISE_WORKLOAD
disabled, but then that option is enabled and timerlat is removed, the
tracepoints that were enabled on timerlat registration do not get
disabled. If the option is disabled again and timelat is started, then it
triggers a warning in the tracepoint code due to registering the
tracepoint again without ever disabling it.
Do not use the same user space defined options to know to disable the
tracepoints when timerlat is removed. Instead, set a global flag when it
is enabled and use that flag to know to disable the events.
~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
~# echo timerlat > /sys/kernel/tracing/current_tracer
~# echo OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
~# echo nop > /sys/kernel/tracing/current_tracer
~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
~# echo timerlat > /sys/kernel/tracing/current_tracer
Triggers:
------------[ cut here ]------------
WARNING: CPU: 6 PID: 1337 at kernel/tracepoint.c:294 tracepoint_add_func+0x3b6/0x3f0
Modules linked in:
CPU: 6 UID: 0 PID: 1337 Comm: rtla Not tainted 6.13.0-rc4-test-00018-ga867c441128e-dirty #73
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:tracepoint_add_func+0x3b6/0x3f0
Code: 48 8b 53 28 48 8b 73 20 4c 89 04 24 e8 23 59 11 00 4c 8b 04 24 e9 36 fe ff ff 0f 0b b8 ea ff ff ff 45 84 e4 0f 84 68 fe ff ff <0f> 0b e9 61 fe ff ff 48 8b 7b 18 48 85 ff 0f 84 4f ff ff ff 49 8b
RSP: 0018:ffffb9b003a87ca0 EFLAGS: 00010202
RAX: 00000000ffffffef RBX: ffffffff92f30860 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9bf59e91ccd0 RDI: ffffffff913b6410
RBP: 000000000000000a R08: 00000000000005c7 R09: 0000000000000002
R10: ffffb9b003a87ce0 R11: 0000000000000002 R12: 0000000000000001
R13: ffffb9b003a87ce0 R14: ffffffffffffffef R15: 0000000000000008
FS: 00007fce81209240(0000) GS:ffff9bf6fdd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055e99b728000 CR3: 00000001277c0002 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __warn.cold+0xb7/0x14d
? tracepoint_add_func+0x3b6/0x3f0
? report_bug+0xea/0x170
? handle_bug+0x58/0x90
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? __pfx_trace_sched_migrate_callback+0x10/0x10
? tracepoint_add_func+0x3b6/0x3f0
? __pfx_trace_sched_migrate_callback+0x10/0x10
? __pfx_trace_sched_migrate_callback+0x10/0x10
tracepoint_probe_register+0x78/0xb0
? __pfx_trace_sched_migrate_callback+0x10/0x10
osnoise_workload_start+0x2b5/0x370
timerlat_tracer_init+0x76/0x1b0
tracing_set_tracer+0x244/0x400
tracing_set_trace_write+0xa0/0xe0
vfs_write+0xfc/0x570
? do_sys_openat2+0x9c/0xe0
ksys_write+0x72/0xf0
do_syscall_64+0x79/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: rtl8150: enable basic endpoint checking
Syzkaller reports [1] encountering a common issue of utilizing a wrong
usb endpoint type during URB submitting stage. This, in turn, triggers
a warning shown below.
For now, enable simple endpoint checking (specifically, bulk and
interrupt eps, testing control one is not essential) to mitigate
the issue with a view to do other related cosmetic changes later,
if they are necessary.
[1] Syzkaller report:
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 1 PID: 2586 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 driv>
Modules linked in:
CPU: 1 UID: 0 PID: 2586 Comm: dhcpcd Not tainted 6.11.0-rc4-syzkaller-00069-gfc88bb11617>
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
Code: 84 3c 02 00 00 e8 05 e4 fc fc 4c 89 ef e8 fd 25 d7 fe 45 89 e0 89 e9 4c 89 f2 48 8>
RSP: 0018:ffffc9000441f740 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff888112487a00 RCX: ffffffff811a99a9
RDX: ffff88810df6ba80 RSI: ffffffff811a99b6 RDI: 0000000000000001
RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: ffff8881023bf0a8 R14: ffff888112452a20 R15: ffff888112487a7c
FS: 00007fc04eea5740(0000) GS:ffff8881f6300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0a1de9f870 CR3: 000000010dbd0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
rtl8150_open+0x300/0xe30 drivers/net/usb/rtl8150.c:733
__dev_open+0x2d4/0x4e0 net/core/dev.c:1474
__dev_change_flags+0x561/0x720 net/core/dev.c:8838
dev_change_flags+0x8f/0x160 net/core/dev.c:8910
devinet_ioctl+0x127a/0x1f10 net/ipv4/devinet.c:1177
inet_ioctl+0x3aa/0x3f0 net/ipv4/af_inet.c:1003
sock_do_ioctl+0x116/0x280 net/socket.c:1222
sock_ioctl+0x22e/0x6c0 net/socket.c:1341
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x193/0x220 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc04ef73d49
...
This change has not been tested on real hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: handle fastopen disconnect correctly
Syzbot was able to trigger a data stream corruption:
WARNING: CPU: 0 PID: 9846 at net/mptcp/protocol.c:1024 __mptcp_clean_una+0xddb/0xff0 net/mptcp/protocol.c:1024
Modules linked in:
CPU: 0 UID: 0 PID: 9846 Comm: syz-executor351 Not tainted 6.13.0-rc2-syzkaller-00059-g00a5acdbf398 #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024
RIP: 0010:__mptcp_clean_una+0xddb/0xff0 net/mptcp/protocol.c:1024
Code: fa ff ff 48 8b 4c 24 18 80 e1 07 fe c1 38 c1 0f 8c 8e fa ff ff 48 8b 7c 24 18 e8 e0 db 54 f6 e9 7f fa ff ff e8 e6 80 ee f5 90 <0f> 0b 90 4c 8b 6c 24 40 4d 89 f4 e9 04 f5 ff ff 44 89 f1 80 e1 07
RSP: 0018:ffffc9000c0cf400 EFLAGS: 00010293
RAX: ffffffff8bb0dd5a RBX: ffff888033f5d230 RCX: ffff888059ce8000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc9000c0cf518 R08: ffffffff8bb0d1dd R09: 1ffff110170c8928
R10: dffffc0000000000 R11: ffffed10170c8929 R12: 0000000000000000
R13: ffff888033f5d220 R14: dffffc0000000000 R15: ffff8880592b8000
FS: 00007f6e866496c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6e86f491a0 CR3: 00000000310e6000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__mptcp_clean_una_wakeup+0x7f/0x2d0 net/mptcp/protocol.c:1074
mptcp_release_cb+0x7cb/0xb30 net/mptcp/protocol.c:3493
release_sock+0x1aa/0x1f0 net/core/sock.c:3640
inet_wait_for_connect net/ipv4/af_inet.c:609 [inline]
__inet_stream_connect+0x8bd/0xf30 net/ipv4/af_inet.c:703
mptcp_sendmsg_fastopen+0x2a2/0x530 net/mptcp/protocol.c:1755
mptcp_sendmsg+0x1884/0x1b10 net/mptcp/protocol.c:1830
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x1a6/0x270 net/socket.c:726
____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583
___sys_sendmsg net/socket.c:2637 [inline]
__sys_sendmsg+0x269/0x350 net/socket.c:2669
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f6e86ebfe69
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 1f 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6e86649168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f6e86f491b8 RCX: 00007f6e86ebfe69
RDX: 0000000030004001 RSI: 0000000020000080 RDI: 0000000000000003
RBP: 00007f6e86f491b0 R08: 00007f6e866496c0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6e86f491bc
R13: 000000000000006e R14: 00007ffe445d9420 R15: 00007ffe445d9508
</TASK>
The root cause is the bad handling of disconnect() generated internally
by the MPTCP protocol in case of connect FASTOPEN errors.
Address the issue increasing the socket disconnect counter even on such
a case, to allow other threads waiting on the same socket lock to
properly error out. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it
Wakeup for IRQ1 should be disabled only in cases where i8042 had
actually enabled it, otherwise "wake_depth" for this IRQ will try to
drop below zero and there will be an unpleasant WARN() logged:
kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug
kernel: ------------[ cut here ]------------
kernel: Unbalanced IRQ 1 wake disable
kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0
The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops
which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and
.poweroff handlers. i8042_pm_suspend(), however, is only set as
the .suspend handler.
Fix the issue by call PMC suspend handler only from the same set of
dev_pm_ops handlers as i8042_pm_suspend(), which currently means just
the .suspend handler.
To reproduce this issue try hibernating (S4) the machine after a fresh boot
without putting it into s2idle first.
[ij: edited the commit message.] |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix legacy client tracking initialization
Get rid of the nfsd4_legacy_tracking_ops->init() call in
check_for_legacy_methods(). That will be handled in the caller
(nfsd4_client_tracking_init()). Otherwise, we'll wind up calling
nfsd4_legacy_tracking_ops->init() twice, and the second time we'll
trigger the BUG_ON() in nfsd4_init_recdir(). |
| In the Linux kernel, the following vulnerability has been resolved:
sched/core: Prevent rescheduling when interrupts are disabled
David reported a warning observed while loop testing kexec jump:
Interrupts enabled after irqrouter_resume+0x0/0x50
WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220
kernel_kexec+0xf6/0x180
__do_sys_reboot+0x206/0x250
do_syscall_64+0x95/0x180
The corresponding interrupt flag trace:
hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90
hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90
That means __up_console_sem() was invoked with interrupts enabled. Further
instrumentation revealed that in the interrupt disabled section of kexec
jump one of the syscore_suspend() callbacks woke up a task, which set the
NEED_RESCHED flag. A later callback in the resume path invoked
cond_resched() which in turn led to the invocation of the scheduler:
__cond_resched+0x21/0x60
down_timeout+0x18/0x60
acpi_os_wait_semaphore+0x4c/0x80
acpi_ut_acquire_mutex+0x3d/0x100
acpi_ns_get_node+0x27/0x60
acpi_ns_evaluate+0x1cb/0x2d0
acpi_rs_set_srs_method_data+0x156/0x190
acpi_pci_link_set+0x11c/0x290
irqrouter_resume+0x54/0x60
syscore_resume+0x6a/0x200
kernel_kexec+0x145/0x1c0
__do_sys_reboot+0xeb/0x240
do_syscall_64+0x95/0x180
This is a long standing problem, which probably got more visible with
the recent printk changes. Something does a task wakeup and the
scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and
invokes schedule() from a completely bogus context. The scheduler
enables interrupts after context switching, which causes the above
warning at the end.
Quite some of the code paths in syscore_suspend()/resume() can result in
triggering a wakeup with the exactly same consequences. They might not
have done so yet, but as they share a lot of code with normal operations
it's just a question of time.
The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling
models. Full preemption is not affected as cond_resched() is disabled and
the preemption check preemptible() takes the interrupt disabled flag into
account.
Cure the problem by adding a corresponding check into cond_resched(). |
| In the Linux kernel, the following vulnerability has been resolved:
misc: misc_minor_alloc to use ida for all dynamic/misc dynamic minors
misc_minor_alloc was allocating id using ida for minor only in case of
MISC_DYNAMIC_MINOR but misc_minor_free was always freeing ids
using ida_free causing a mismatch and following warn:
> > WARNING: CPU: 0 PID: 159 at lib/idr.c:525 ida_free+0x3e0/0x41f
> > ida_free called for id=127 which is not allocated.
> > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
...
> > [<60941eb4>] ida_free+0x3e0/0x41f
> > [<605ac993>] misc_minor_free+0x3e/0xbc
> > [<605acb82>] misc_deregister+0x171/0x1b3
misc_minor_alloc is changed to allocate id from ida for all minors
falling in the range of dynamic/ misc dynamic minors |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Grab intel_display from the encoder to avoid potential oopsies
Grab the intel_display from 'encoder' rather than 'state'
in the encoder hooks to avoid the massive footgun that is
intel_sanitize_encoder(), which passes NULL as the 'state'
argument to encoder .disable() and .post_disable().
TODO: figure out how to actually fix intel_sanitize_encoder()... |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: prohibit deactivating all links
In the internal API this calls this is a WARN_ON, but that
should remain since internally we want to know about bugs
that may cause this. Prevent deactivating all links in the
debugfs write directly. |
| In the Linux kernel, the following vulnerability has been resolved:
topology: Keep the cpumask unchanged when printing cpumap
During fuzz testing, the following warning was discovered:
different return values (15 and 11) from vsnprintf("%*pbl
", ...)
test:keyward is WARNING in kvasprintf
WARNING: CPU: 55 PID: 1168477 at lib/kasprintf.c:30 kvasprintf+0x121/0x130
Call Trace:
kvasprintf+0x121/0x130
kasprintf+0xa6/0xe0
bitmap_print_to_buf+0x89/0x100
core_siblings_list_read+0x7e/0xb0
kernfs_file_read_iter+0x15b/0x270
new_sync_read+0x153/0x260
vfs_read+0x215/0x290
ksys_read+0xb9/0x160
do_syscall_64+0x56/0x100
entry_SYSCALL_64_after_hwframe+0x78/0xe2
The call trace shows that kvasprintf() reported this warning during the
printing of core_siblings_list. kvasprintf() has several steps:
(1) First, calculate the length of the resulting formatted string.
(2) Allocate a buffer based on the returned length.
(3) Then, perform the actual string formatting.
(4) Check whether the lengths of the formatted strings returned in
steps (1) and (2) are consistent.
If the core_cpumask is modified between steps (1) and (3), the lengths
obtained in these two steps may not match. Indeed our test includes cpu
hotplugging, which should modify core_cpumask while printing.
To fix this issue, cache the cpumask into a temporary variable before
calling cpumap_print_{list, cpumask}_to_buf(), to keep it unchanged
during the printing process. |
