| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix call timer start racing with call destruction
The rxrpc_call struct has a timer used to handle various timed events
relating to a call. This timer can get started from the packet input
routines that are run in softirq mode with just the RCU read lock held.
Unfortunately, because only the RCU read lock is held - and neither ref or
other lock is taken - the call can start getting destroyed at the same time
a packet comes in addressed to that call. This causes the timer - which
was already stopped - to get restarted. Later, the timer dispatch code may
then oops if the timer got deallocated first.
Fix this by trying to take a ref on the rxrpc_call struct and, if
successful, passing that ref along to the timer. If the timer was already
running, the ref is discarded.
The timer completion routine can then pass the ref along to the call's work
item when it queues it. If the timer or work item where already
queued/running, the extra ref is discarded. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/rdmavt: add lock to call to rvt_error_qp to prevent a race condition
The documentation of the function rvt_error_qp says both r_lock and s_lock
need to be held when calling that function. It also asserts using lockdep
that both of those locks are held. However, the commit I referenced in
Fixes accidentally makes the call to rvt_error_qp in rvt_ruc_loopback no
longer covered by r_lock. This results in the lockdep assertion failing
and also possibly in a race condition. |
| vLLM is an inference and serving engine for large language models. From 0.20.2rc0 until 0.26.0, safe_load_prompt_embeds in vllm/renderers/embed_utils.py uses torch.sparse.check_sparse_tensor_invariants, whose process-global save, enable, and restore state can be raced by concurrent prompt_embeds parts submitted to POST /v1/chat/completions through AsyncMultiModalItemTracker.resolve_items, asyncio.gather, and the default executor, allowing an invalid sparse tensor to reach tensor.to_dense despite the CVE-2025-62164 guard when enable_prompt_embeds is enabled. This issue is fixed in version 0.26.0. |
| Race condition in the XPCOM component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
| HTTP/2 servers could end up crashing due to inadvertently modifying its HPACK encoder concurrently. This happens because the server modifies the HPACK encoder from two goroutines without synchronization: one uses the encoder to encode a HEADERS frame as part of a response sent to a client and the other modifies the encoder's table size when handling a SETTINGS frame containing SETTINGS_HEADER_TABLE_SIZE that a client sends. A malicious client can repeatedly send a request while changing the header table size to crash the server. |
| A security vulnerability has been detected in macrozheng mall up to 1.0.3. This issue affects some unknown processing of the file /order/generateOrder of the component Coupon Redemption. Such manipulation of the argument couponId leads to race condition. The attack may be performed from remote. The attack requires a high level of complexity. The exploitability is assessed as difficult. The vendor deleted the GitHub issue for this vulnerability without any explanation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: don't WARN on kernel job timeout when device already wedged
igt@xe_wedged@wedged-at-any-timeout wedges the device in mode 2
(UPON_ANY_HANG_NO_RESET) and then rebinds the driver. During unbind,
a GSC proxy kernel submission can still time out; with the device wedged
and the GuC CT stopped it can never complete, so its kernel job times out.
Tile0: GT1: Kernel-submitted job timed out
WARNING: drivers/gpu/drm/xe/xe_guc_submit.c:...
at guc_exec_queue_timedout_job()
Workqueue: gt-ordered-wq drm_sched_job_timedout
Killed queues skip guc_submit_hint_wedged(), leaving 'wedged' false even
though the device is already wedged. The timeout handler then treats the
kernel queue timeout as unexpected and taints the kernel.
Honour an already-wedged device even for killed queues so the expected
teardown timeout no longer trips the WARN.
(cherry picked from commit a1c1dbd0f047bb05de6aaf6abe9103031179bf19) |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Serialize multi-part Get/Set Feature transfers
A Get or Set Feature payload larger than the mailbox payload size is
split into several mailbox commands. mbox_mutex only serializes
individual mailbox commands and is dropped between iterations of these
loops. Nothing serializes the multi-part transfer as a whole.
cxl_get_feature() and cxl_set_feature() are reachable concurrently
from fwctl (per-fd RPCs run under a read-held registration lock) and
from the EDAC scrub/ECS/repair paths, so two transfers to the same
mailbox can interleave their parts and corrupt the device's transfer
context.
Add a per-mailbox feat_mutex and hold it across the whole transfer in
both functions. It nests outside mbox_mutex (which is taken inside
cxl_internal_send_cmd()), and is taken nowhere else, so no lock-ordering
inversion is introduced. |
| In the Linux kernel, the following vulnerability has been resolved:
md: remove REQ_NOWAIT support from raid1/10/456
REQ_NOWAIT support in md personalities that can block internally is
fundamentally incomplete. While reads can avoid some blocking paths,
write requests can still encounter cases where one mirror succeeds while
another returns -EAGAIN. At that point md cannot distinguish queue
pressure from a real device failure, so it can neither record a bad
block nor safely retry the write without REQ_NOWAIT, leaving mirrors
with divergent data.
Rather than continue advertising REQ_NOWAIT support for personalities
that cannot implement it correctly, remove it from raid1, raid10 and
raid456. Keep REQ_NOWAIT for linear and raid0, which only remap bios to
their underlying devices; stacked limits will still clear the feature if
any component device lacks REQ_NOWAIT support. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: flush active metadata block group at btree_writepages() start
btree_writepages() writes the btree inode's dirty metadata in ascending
logical address order. On a zoned filesystem only one metadata and one
system block group is active for writing at a time, and
check_bg_is_active() (via btrfs_check_meta_write_pointer()) pivots the
active block group as writeback moves from one block group to the next.
If the active block group sits at a higher logical address than another
block group that also holds dirty metadata, the ascending walk reaches
the lower one first and, to write it, has to finish the active block
group and activate the lower one. It cannot finish a block group that
still has unsent IO, and during WB_SYNC_ALL && !for_sync (commit)
writeback it deliberately refuses to wait for that IO under
fs_info->zoned_meta_io_lock, as that can deadlock. The pivot thus cannot
issue the submission itself either, so it gives up:
btrfs_check_meta_write_pointer() returns -EAGAIN, which
btrfs_write_and_wait_transaction() treats as fatal and aborts the
transaction, forcing the filesystem read-only. This happens
intermittently under metadata-heavy relocation (e.g. fstests btrfs/187).
Flush the active metadata and system block groups at the start of
btree_writepages(), under the fs_info->zoned_meta_io_lock it already
holds, so they have no unsent IO left and the later pivot can finish
them and make forward progress. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix race condition when checking rpm_on
When autosuspend is triggered, driver rpm_on flag is set to indicate that
a suspend/resume is already in progress. However, when a userspace
application submits a command during this narrow window,
amdxdna_pm_resume_get() may incorrectly skip the resume operation because
the rpm_on flag is still set. This results in commands being submitted
while the device has not actually resumed, causing unexpected behavior.
The set_dpm() is called by suspend/resume, it relied on rpm_on flag to
avoid calling into rpm suspend/resume recursivly. So to fix this, remove
the use of the rpm_on flag entirely. Instead, introduce aie2_pm_set_dpm()
which explicitly resumes the device before invoking set_dpm(). With this
change, set_dpm() is called directly inside the suspend or resume execution
path. Otherwise, aie2_pm_set_dpm() is called. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: core: fix adapter registration race
Adapters can be looked up based on their id using i2c_get_adapter()
which takes a reference to the embedded struct device.
Make sure that the adapter (including its struct device) has been
initialised before adding it to the IDR to avoid accessing uninitialised
data which could, for example, lead to NULL-pointer dereferences or
use-after-free.
Note that the i2c-dev chardev, which is registered from a bus notifier,
currently uses i2c_get_adapter() so the adapter needs to be added to the
IDR before registration. |
| In the Linux kernel, the following vulnerability has been resolved:
quota: Fix race of dquot_scan_active() with quota deactivation
dquot_scan_active() can race with quota deactivation in
quota_release_workfn() like:
CPU0 (quota_release_workfn) CPU1 (dquot_scan_active)
============================== ==============================
spin_lock(&dq_list_lock);
list_replace_init(
&releasing_dquots, &rls_head);
/* dquot X on rls_head,
dq_count == 0,
DQ_ACTIVE_B still set */
spin_unlock(&dq_list_lock);
synchronize_srcu(&dquot_srcu);
spin_lock(&dq_list_lock);
list_for_each_entry(dquot,
&inuse_list, dq_inuse) {
/* finds dquot X */
dquot_active(X) -> true
atomic_inc(&X->dq_count);
}
spin_unlock(&dq_list_lock);
spin_lock(&dq_list_lock);
dquot = list_first_entry(&rls_head);
WARN_ON_ONCE(atomic_read(&dquot->dq_count));
The problem is not only a cosmetic one as under memory pressure the
caller of dquot_scan_active() can end up working on freed dquot.
Fix the problem by making sure the dquot is removed from releasing list
when we acquire a reference to it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: fix kthread lifetime race between self-exit and external-stop
RSI driver use both self-exit(kthread_complete_and_exit) and external-stop
(kthread_stop) when killing a kthread. Generally, kthread_stop() is called
first, and in this case, no particular issues occur.
However, in rare instances where kthread_complete_and_exit() is called
first and then kthread_stop() is called, a UAF occurs because the kthread
object, which has already exited and been freed, is accessed again.
Therefore, to prevent this with minimal modification, you must remove
kthread_stop() and change the code to wait until the self-exit operation
is completed. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050: Move iio_device_register() to correct location
iio_device_register() should be at the end of the probe function to
prevent race conditions.
Place iio_device_register() at the end of the probe function and place
iio_device_unregister() accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: fsl: qbman: fix race condition in qman_destroy_fq
When QMAN_FQ_FLAG_DYNAMIC_FQID is set, there's a race condition between
fq_table[fq->idx] state and freeing/allocating from the pool and
WARN_ON(fq_table[fq->idx]) in qman_create_fq() gets triggered.
Indeed, we can have:
Thread A Thread B
qman_destroy_fq() qman_create_fq()
qman_release_fqid()
qman_shutdown_fq()
gen_pool_free()
-- At this point, the fqid is available again --
qman_alloc_fqid()
-- so, we can get the just-freed fqid in thread B --
fq->fqid = fqid;
fq->idx = fqid * 2;
WARN_ON(fq_table[fq->idx]);
fq_table[fq->idx] = fq;
fq_table[fq->idx] = NULL;
And adding some logs between qman_release_fqid() and
fq_table[fq->idx] = NULL makes the WARN_ON() trigger a lot more.
To prevent that, ensure that fq_table[fq->idx] is set to NULL before
gen_pool_free() is called by using smp_wmb(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Wake up the error handler when final completions race against each other
The fragile ordering between marking commands completed or failed so
that the error handler only wakes when the last running command
completes or times out has race conditions. These race conditions can
cause the SCSI layer to fail to wake the error handler, leaving I/O
through the SCSI host stuck as the error state cannot advance.
First, there is an memory ordering issue within scsi_dec_host_busy().
The write which clears SCMD_STATE_INFLIGHT may be reordered with reads
counting in scsi_host_busy(). While the local CPU will see its own
write, reordering can allow other CPUs in scsi_dec_host_busy() or
scsi_eh_inc_host_failed() to see a raised busy count, causing no CPU to
see a host busy equal to the host_failed count.
This race condition can be prevented with a memory barrier on the error
path to force the write to be visible before counting host busy
commands.
Second, there is a general ordering issue with scsi_eh_inc_host_failed(). By
counting busy commands before incrementing host_failed, it can race with a
final command in scsi_dec_host_busy(), such that scsi_dec_host_busy() does
not see host_failed incremented but scsi_eh_inc_host_failed() counts busy
commands before SCMD_STATE_INFLIGHT is cleared by scsi_dec_host_busy(),
resulting in neither waking the error handler task.
This needs the call to scsi_host_busy() to be moved after host_failed is
incremented to close the race condition. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: mmp_pdma: Fix race condition in mmp_pdma_residue()
Add proper locking in mmp_pdma_residue() to prevent use-after-free when
accessing descriptor list and descriptor contents.
The race occurs when multiple threads call tx_status() while the tasklet
on another CPU is freeing completed descriptors:
CPU 0 CPU 1
----- -----
mmp_pdma_tx_status()
mmp_pdma_residue()
-> NO LOCK held
list_for_each_entry(sw, ..)
DMA interrupt
dma_do_tasklet()
-> spin_lock(&desc_lock)
list_move(sw->node, ...)
spin_unlock(&desc_lock)
| dma_pool_free(sw) <- FREED!
-> access sw->desc <- UAF!
This issue can be reproduced when running dmatest on the same channel with
multiple threads (threads_per_chan > 1).
Fix by protecting the chain_running list iteration and descriptor access
with the chan->desc_lock spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg
Issuing two writes to the same af_alg socket is bogus as the
data will be interleaved in an unpredictable fashion. Furthermore,
concurrent writes may create inconsistencies in the internal
socket state.
Disallow this by adding a new ctx->write field that indiciates
exclusive ownership for writing. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: fix race between nfsd registration and exports_proc
As of now nfsd calls create_proc_exports_entry() at start of init_nfsd
and cleanup by remove_proc_entry() at last of exit_nfsd.
Which causes kernel OOPs if there is race between below 2 operations:
(i) exportfs -r
(ii) mount -t nfsd none /proc/fs/nfsd
for 5.4 kernel ARM64:
CPU 1:
el1_irq+0xbc/0x180
arch_counter_get_cntvct+0x14/0x18
running_clock+0xc/0x18
preempt_count_add+0x88/0x110
prep_new_page+0xb0/0x220
get_page_from_freelist+0x2d8/0x1778
__alloc_pages_nodemask+0x15c/0xef0
__vmalloc_node_range+0x28c/0x478
__vmalloc_node_flags_caller+0x8c/0xb0
kvmalloc_node+0x88/0xe0
nfsd_init_net+0x6c/0x108 [nfsd]
ops_init+0x44/0x170
register_pernet_operations+0x114/0x270
register_pernet_subsys+0x34/0x50
init_nfsd+0xa8/0x718 [nfsd]
do_one_initcall+0x54/0x2e0
CPU 2 :
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
PC is at : exports_net_open+0x50/0x68 [nfsd]
Call trace:
exports_net_open+0x50/0x68 [nfsd]
exports_proc_open+0x2c/0x38 [nfsd]
proc_reg_open+0xb8/0x198
do_dentry_open+0x1c4/0x418
vfs_open+0x38/0x48
path_openat+0x28c/0xf18
do_filp_open+0x70/0xe8
do_sys_open+0x154/0x248
Sometimes it crashes at exports_net_open() and sometimes cache_seq_next_rcu().
and same is happening on latest 6.14 kernel as well:
[ 0.000000] Linux version 6.14.0-rc5-next-20250304-dirty
...
[ 285.455918] Unable to handle kernel paging request at virtual address 00001f4800001f48
...
[ 285.464902] pc : cache_seq_next_rcu+0x78/0xa4
...
[ 285.469695] Call trace:
[ 285.470083] cache_seq_next_rcu+0x78/0xa4 (P)
[ 285.470488] seq_read+0xe0/0x11c
[ 285.470675] proc_reg_read+0x9c/0xf0
[ 285.470874] vfs_read+0xc4/0x2fc
[ 285.471057] ksys_read+0x6c/0xf4
[ 285.471231] __arm64_sys_read+0x1c/0x28
[ 285.471428] invoke_syscall+0x44/0x100
[ 285.471633] el0_svc_common.constprop.0+0x40/0xe0
[ 285.471870] do_el0_svc_compat+0x1c/0x34
[ 285.472073] el0_svc_compat+0x2c/0x80
[ 285.472265] el0t_32_sync_handler+0x90/0x140
[ 285.472473] el0t_32_sync+0x19c/0x1a0
[ 285.472887] Code: f9400885 93407c23 937d7c27 11000421 (f86378a3)
[ 285.473422] ---[ end trace 0000000000000000 ]---
It reproduced simply with below script:
while [ 1 ]
do
/exportfs -r
done &
while [ 1 ]
do
insmod /nfsd.ko
mount -t nfsd none /proc/fs/nfsd
umount /proc/fs/nfsd
rmmod nfsd
done &
So exporting interfaces to user space shall be done at last and
cleanup at first place.
With change there is no Kernel OOPs. |
