Export limit exceeded: 421270 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (1261 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72023 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix SQB pointer leak on init failure otx2_init_hw_resources() initializes SQ aura and pool resources before several later setup steps. On failure, err_free_sq_ptrs only frees SQB pages, leaving the per-SQ sqb_ptrs arrays behind. Use otx2_free_sq_res() for the SQ unwind path and let it free sqb_ptrs even when sq->sqe has not been allocated yet. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an OcteonTX2 PF device and the corresponding AF mailbox setup to test with, no runtime testing was able to be performed. | ||||
| CVE-2026-72017 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: drop in-flight Tx SKBs on close The MACB driver has since forever leaked the outgoing SKBs that have not yet been marked as completed. They live in queue->tx_skb which gets freed without remorse nor checking. macb_free_consistent() gets called in a few codepaths, but only close will trigger the added expressions. In macb_open() and macb_alloc_consistent() failure cases, queues' tx_skb just got allocated and are empty. | ||||
| CVE-2026-64139 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix SID memory leak in set_posix_acl_entries_dacl() on overflow Commit 299f962c0b02 ("ksmbd: use check_add_overflow() to prevent u16 DACL size overflow") added check_add_overflow() guards that break out of the ACE-building loops in set_posix_acl_entries_dacl() when the accumulated DACL size would wrap past 65535. However, each iteration allocates a struct smb_sid via kmalloc_obj() at the top of the loop and relies on the kfree(sid) call at the end of the loop body (the 'pass_same_sid' label in the first loop, and the explicit kfree at the tail of the second loop) to release it. The newly introduced 'break' statements bypass those kfree() calls, leaking the sid buffer every time an overflow is detected. A malicious or malformed file with enough POSIX ACL entries to trip the overflow check will leak one or more struct smb_sid allocations on every request that touches the file's DACL, providing a trivial kernel memory exhaustion vector. Free sid before breaking out of the loops to plug the leak. | ||||
| CVE-2026-74719 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: fix qentry overwrite for CONFIRM_LINK and ADD_LINK_CONT in smc_llc_event_handler() The SMC_LLC_CONFIRM_LINK / SMC_LLC_ADD_LINK_CONT branch in smc_llc_event_handler() stores an incoming qentry into the local LLC flow without first checking whether a qentry is already pending. If a malicious or buggy peer sends a second CONFIRM_LINK or ADD_LINK_CONT request while a flow is active and flow->qentry is already set, smc_llc_flow_qentry_set() overwrites the pointer without freeing the previous allocation, leaking one kmalloc-96 object per spurious message. The sibling SMC_LLC_DELETE_LINK branch already has the correct !flow->qentry guard. Apply the same guard to the CONFIRM_LINK/ADD_LINK_CONT branch so that a duplicate message when qentry is already occupied falls through to break and is freed by the kfree(qentry) at the out: label, rather than silently leaking the existing allocation. The response direction (smc_llc_rx_response()) is unaffected: it already guards with flow->qentry at the equivalent site and drops duplicate responses correctly. | ||||
| CVE-2026-72145 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/intel/tpmi: use cleanup helpers in mem_write() In mem_write(), the temporary array returned by parse_int_array_user() must be released on all exit paths. Convert the array variable to use cleanup.h scope-based cleanup so it is freed automatically on return. This also moves the array declaration next to parse_int_array_user() as required by cleanup.h usage guidelines. | ||||
| CVE-2026-72205 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: free volume-wide resources on fill_super failure ntfs_fill_super()'s err_out_now path frees only the volume struct via kfree(vol), leaving several vol-owned allocations behind on every mount failure: - vol->nls_map, loaded by ntfs_init_fs_context() via load_nls_default() (or replaced by an explicit nls= option in ntfs_parse_param()), is never unload_nls()'d. - vol->volume_label, allocated by load_system_files() through ntfs_ucstonls() once the $Volume name attribute has been parsed, is not released by load_system_files()'s own error labels nor by the fill_super() inline cleanup that only runs on d_make_root() failure. Any later failure inside load_system_files() leaks it. - vol->lcn_empty_bits_per_page was kvfree()'d in unl_upcase_iput_tmp_ino_err_out_now without clearing the pointer, so it could not be folded into a single common cleanup. Because the failure paths never call ntfs_volume_free() and never reach the d_make_root() inline cleanup block (it sits above the label and is jumped over by the load_system_files() / kvmalloc failure gotos), these resources accumulate per failed mount attempt with no chance of recovery short of unloading the module. This is a silent leak: the inodes loaded prior to failure remain hashed but generic_shutdown_super() skips evict_inodes() when sb->s_root is unset, so no CHECK_DATA_CORRUPTION warning is emitted either. Move the per-volume frees down to err_out_now and drop the lcn_empty_bits_per_page kvfree() from the upper label so the cleanup is performed exactly once on every failure path. Using unconditional kvfree() / kfree() / unload_nls() is safe because they all accept NULL and the upper labels that previously freed nls_map (the d_make_root() inline cleanup) already clear the pointer. | ||||
| CVE-2026-72311 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: free madvise VMA array on L2 flush failure xe_vm_madvise_ioctl() allocates madvise_range.vmas in get_vmas(). After get_vmas() succeeds with at least one VMA, error paths must go through free_vmas so the array is released before the madvise details are destroyed. The L2 flush validation path added for PAT madvise rejects some SVM/userptr ranges after get_vmas() has succeeded, but jumps directly to madv_fini. This skips kfree(madvise_range.vmas), leaking the VMA array on each failed ioctl. Jump to free_vmas instead, matching the other validation failure paths after get_vmas() has succeeded. (cherry picked from commit c3a1c3579b1250060da73507a4acef712974c78a) | ||||
| CVE-2026-72333 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix tx ident leak for commands without a response Commit 6c3ea155e5ee ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident") changed ident allocation to use an IDA, releasing idents in l2cap_put_ident() when the matching response command is received. But identifiers allocated for commands that have no response defined are never released. In particular L2CAP_LE_CREDITS is sent repeatedly for the lifetime of an LE CoC channel, so a peer streaming data to the host exhausts the 1-255 ident range after 254 credit packets. From then on l2cap_get_ident() fails: kernel: Bluetooth: Unable to allocate ident: -28 and every subsequent L2CAP_LE_CREDITS packet is sent with ident 0, which is invalid (Core Spec, Vol 3, Part A, Section 4: "Signaling identifier 0x00 is an invalid identifier and shall never be used in any command"). Remote stacks that validate the ident drop these commands, never receive new credits, and the channel stalls permanently. With default socket buffers this happens after roughly 0.5 MB of received data (the exact amount depends on the socket receive buffer): < ACL Data TX: Handle 2048 flags 0x00 dlen 12 LE L2CAP: LE Flow Control Credit (0x16) ident 0 len 4 Source CID: 64 Credits: 1 Release the ident immediately after sending L2CAP_LE_CREDITS since no response will ever release it. Use a local variable instead of chan->ident so that an ident that an EXT_FLOWCTL channel may be waiting on (e.g. a pending reconfigure) is not overwritten by a credit packet. Also add the missing L2CAP_LE_CONN_RSP case to l2cap_put_ident() so idents allocated for outgoing L2CAP_LE_CONN_REQ commands are released when the response arrives. | ||||
| CVE-2026-72364 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix writeback error handling Fix the error handling in writeback_iter() loop. If an error occurs, writeback_iter() needs to be called again with *error set to the error so that it can clean up iteration state. Further, the current folio needs unlocking and redirtying. | ||||
| CVE-2026-72391 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: sfp: free mii_bus in sfp_i2c_mdiobus_destroy sfp_i2c_mdiobus_create() allocates the I2C MDIO bus with mdio_i2c_alloc(), a plain (non-devm) allocation, and registers it. sfp_i2c_mdiobus_destroy() only unregisters the bus and clears sfp->i2c_mii without calling mdiobus_free(). As the only reference to the bus is then cleared, the struct mii_bus is leaked. This is hit whenever a copper/RollBall SFP module that instantiated an MDIO bus is removed: sfp_sm_main() takes the global teardown path and calls sfp_i2c_mdiobus_destroy(). sfp_cleanup(), on driver unbind, frees sfp->i2c_mii directly, which is why the leak only triggered on module hot-removal and not on unbind. Free the bus in sfp_i2c_mdiobus_destroy() to match the allocation done in sfp_i2c_mdiobus_create(). | ||||
| CVE-2026-72401 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix insn_aux_data leak on verifier err_free_env path When bpf_check() allocates env->insn_aux_data successfully but later fails to allocate env->succ, it jumps directly to err_free_env. The existing vfree(env->insn_aux_data) sits before the err_free_env label, so that direct jump bypasses it and leaks insn_aux_data. Move vfree(env->insn_aux_data) into err_free_env so all early and late exit paths release it consistently. | ||||
| CVE-2026-72448 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix leak of SQ timestamp buffer on teardown The send-queue timestamp ring is allocated with qmem_alloc() when timestamping is used, but otx2_free_sq_res() never freed sq->timestamps, leaking that memory across ifdown and device removal. Add the missing qmem_free() alongside the other SQ companion buffers. | ||||
| CVE-2026-72459 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: aa_label_alloc use aa_label_free on alloc failure aa_label_alloc() allocates a secid before allocating or taking the label proxy. If the later proxy step fails, the error path only freed the label memory, leaking any resources initialized by aa_label_init(). Use aa_label_free() on the failure path so partially initialized labels release their secid and other label resources before the backing memory is freed. | ||||
| CVE-2026-74281 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: reject inverted service ranges from peer bindings tipc_update_nametbl() inserts a binding advertised by a peer node using the lower and upper service-range bounds taken directly from the wire, without checking that lower <= upper. The local bind path validates the ordering (tipc_uaddr_valid()), but the name-distribution path does not. A binding with lower > upper is inserted at the far end of the service-range rbtree (keyed on lower) where no lookup or withdrawal can ever match it (service_range_foreach_match() requires sr->lower <= end). The publication, its service_range node and the augmented rbtree entry are then leaked for the lifetime of the namespace, and there is no per-peer cap equivalent to TIPC_MAX_PUBL on locally created bindings. Reject inverted ranges in the network path as well. A peer node can otherwise leak unbounded binding-table memory by sending PUBLICATION items with lower > upper. | ||||
| CVE-2026-74279 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: crypto: cavium/cpt - fix DMA cleanup using wrong loop index The sg_cleanup error path used list[i] instead of list[j] when unmapping DMA buffers, leaking successfully mapped entries and repeatedly unmapping the failed one. | ||||
| CVE-2026-74299 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix FRMR aging push to queue error flow Aging pools with pinned handles requires moving handles from the active queue to a non-empty inactive queue that might fail on new page allocation, we are currently not handling the fault and leaking any mkey that fails the push. Fix by Introducing push_queue_to_queue_locked() that fills the destination's partial tail page from the source and then splices the remaining source pages onto the destination, performing no allocation. Replace the per-handle move loop in age_pinned_pool() and the open-coded splice in pool_aging_work() with calls to the helper. As the helper cannot fail under memory pressure, removing a class of GFP_ATOMIC allocations under the pool lock and simplifying the error flow. | ||||
| CVE-2026-74326 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix resource leak in probe error path When pcim_iomap_region() or devm_kmemdup() fail, the code returns directly without cleaning up previously allocated resources: - mt76_device allocated by mt76_alloc_device() - pci irq vectors allocated by pci_alloc_irq_vectors() Fix this by jumping to the existing error cleanup path instead of returning directly. | ||||
| CVE-2026-74376 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: reset read_slot when reusing r10bio for discard put_all_bios() always drops devs[i].bio, but it only drops devs[i].repl_bio when r10_bio->read_slot < 0. If discard reuses an r10bio that was previously used for a read, read_slot can still be non-negative, and discard cleanup can skip bio_put() on repl_bio. Reset read_slot to -1 when preparing an r10bio for discard so the replacement bio is always released correctly. | ||||
| CVE-2026-74423 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix leak when pinning ubuf pages When pin_user_pages_fast() returns fewer pages than requested, the pages that were successfully pinned are not released, leading to a leak. Fix this by unpinning any partially pinned pages before returning failure. | ||||
| CVE-2026-74459 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: etas_es58x: es58x_read_bulk_callback(): fix RX buffer leak on URB resubmit failure es58x_read_bulk_callback() resubmits the RX URB after processing a received packet. If the resubmit succeeds, the URB remains anchored and will be handled by the normal RX path or by teardown. However, if usb_submit_urb() fails, the callback unanchors the URB and then returns directly. This skips the existing free_urb path, so the coherent transfer buffer allocated with usb_alloc_coherent() is not released. Reuse the existing free_urb path after a resubmit failure so that the RX coherent buffer is freed before leaving the callback. | ||||