| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FOSSBilling is a free, open-source billing and client management system. Prior to version 0.8.0, the PayPalEmail payment adapter accepts PayPal IPN callbacks and credits the IPN-supplied amount (`mc_gross`) to the client's balance without validating it against the invoice total. Combined with a $0.05 floating-point epsilon tolerance in the invoice credit-payment logic, this allows a client to underpay an invoice by up to $0.04 and still have it marked as fully paid. Version 0.8.0 patches the issue. There is no effective workaround without modifying the source code. Merchants using the PayPalEmail adapter should monitor IPN transactions for amounts that do not match their corresponding invoice totals, and manually review and refund suspicious payments. |
| Pillow is a Python imaging library. Prior to 12.3.0, PIL/GdImageFile.py GdImageFile._open() read image dimensions from the GD 2.x header and stored them in self._size without calling Image._decompression_bomb_check(), allowing a crafted .gd file to trigger excessive C-heap allocation when loaded. This issue is fixed in version 12.3.0. |
| An unauthenticated remote attacker can exhaust
server memory via the GetEndpoints Discovery Service in open62541. The
endpointUrl field of GetEndpointsRequest is not validated for length. An
attacker can declare an arbitrarily large string (up to ~4.09 GB via the UInt32
length field) delivered across intermediate chunks without ever sending the
final chunk. The server buffers all chunks in RAM indefinitely until the
SecureChannel times out. The attack is
pre-session and bypasses all encryption configurations.
The issue affects open62541: from 1.4.0 through 1.4.16, from 1.5.0 through 1.5.4, master. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Skip CSD when it has zeroed workgroups
A compute shader dispatch encodes its workgroup counts in the CFG0..CFG2
registers. Kicking off a dispatch with a zero count in any of the three
dimensions is invalid. First, the hardware will process 0 as 65536,
while the user-space driver exposes a maximum of 65535. Over that, a
submission with a zeroed workgroup dimension should be a no-op.
These zeroed counts can reach the dispatch path through an indirect CSD
job, whose workgroup counts are only known once the indirect buffer is
read and may legitimately be zero, but such scenario should only result in
a no-op.
Overwrite the indirect CSD job workgroup counts with the indirect BO
ones, even if they are zeroed, and don't submit the job to the hardware
when any of the workgroup counts is zero, so the job completes immediately
instead of running the shader. |
| containerd is an open-source container runtime. Versions prior to 2.3.2, 2.2.5 and 2.1.9 contain a vulnerability in the CRI checkpoint import process where it fails to validate the image references specified within a checkpoint image's configuration. An attacker with permissions to create pods can use a crafted checkpoint image to force containerd to pull a malicious image and assign it an arbitrary local tag, thereby poisoning the node's local image cache. Subsequently, if other pods on the same node attempt to use the poisoned tag with an IfNotPresent (or Never) pull policy, they will unknowingly execute the attacker's malicious image instead of the legitimate one. This can lead to a compromise of the affected pods, allowing the attacker to execute arbitrary code under the victim pod's identity. This issue has been fixed in versions 2.3.2, 2.2.5 and 2.1.9. |
| Missing validation of "valuesFrom" references in Helm Deployer of SUSE Rancher Fleet 0.15 before 0.15.2, 0.14 before 0.14.6, 0.13 before 0.13.11 and 0.12 before 0.12.15 could be used by owners of one tenant to access fleet credentials of other tenants. |
| Unauthenticated Arbitrary Code Execution in W3 Total Cache <= 2.9.4 versions. |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 for Linux, UNIX and Windows (includes Db2 Connect Server) could allow an authenticated user to cause a denial of service due to improper neutralization of special elements in the data query logic of XMLTable-derived columns. |
| Unauthenticated Multiple Vulnerabilities in BitFire Security <= 5.0.3 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: fix IFM region index out-of-bounds in command stream parser
NPU_SET_IFM_REGION extracts the region index with param & 0x7f, giving
a maximum value of 127. However region_size[] and output_region[] in
struct ethosu_validated_cmdstream_info are both sized to
NPU_BASEP_REGION_MAX (8), giving valid indices [0..7].
Every other region assignment in the same switch uses param & 0x7:
NPU_SET_OFM_REGION: st.ofm.region = param & 0x7;
NPU_SET_IFM2_REGION: st.ifm2.region = param & 0x7;
NPU_SET_WEIGHT_REGION: st.weight[0].region = param & 0x7;
NPU_SET_SCALE_REGION: st.scale[0].region = param & 0x7;
The 0x7f mask on IFM is inconsistent and appears to be a typo.
feat_matrix_length() and calc_sizes() use the region index directly
as an array subscript into the kzalloc'd info struct:
info->region_size[fm->region] = max(...);
A userspace caller supplying NPU_SET_IFM_REGION with param > 7 causes
a write up to 127*8 = 1016 bytes past the start of region_size[],
corrupting adjacent kernel heap data.
Fix by applying the same & 0x7 mask used by all other region
assignments. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/dlm: validate qr_numregions in dlm_match_regions()
Patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()".
In dlm_match_regions(), the qr_numregions field from a DLM_QUERY_REGION
network message is used to drive loops over the qr_regions buffer without
sufficient validation. This series fixes two issues:
- Patch 1 adds a bounds check to reject messages where qr_numregions
exceeds O2NM_MAX_REGIONS. The o2net layer only validates message
byte length; it does not constrain field values, so a crafted message
can set qr_numregions up to 255 and trigger out-of-bounds reads past
the 1024-byte qr_regions buffer.
- Patch 2 fixes an off-by-one in the local-vs-remote comparison loop,
which uses '<=' instead of '<', reading one entry past the valid range
even when qr_numregions is within bounds.
This patch (of 2):
The qr_numregions field from a DLM_QUERY_REGION network message is used
directly as loop bounds in dlm_match_regions() without checking against
O2NM_MAX_REGIONS. Since qr_regions is sized for at most O2NM_MAX_REGIONS
(32) entries, a crafted message with qr_numregions > 32 causes
out-of-bounds reads past the qr_regions buffer.
Add a bounds check for qr_numregions before entering the loops. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate bg_bits during freefrag scan
[BUG]
A crafted filesystem can trigger an out-of-bounds bitmap walk when
OCFS2_IOC_INFO is issued with OCFS2_INFO_FL_NON_COHERENT.
BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: use-after-free in test_bit_le include/asm-generic/bitops/le.h:21 [inline]
BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline]
BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline]
BUG: KASAN: use-after-free in ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline]
BUG: KASAN: use-after-free in ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754
Read of size 8 at addr ffff888031bce000 by task syz.0.636/1435
Call Trace:
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xbe/0x130 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xd1/0x650 mm/kasan/report.c:482
kasan_report+0xfb/0x140 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:186 [inline]
kasan_check_range+0x11c/0x200 mm/kasan/generic.c:200
__kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
test_bit_le include/asm-generic/bitops/le.h:21 [inline]
ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline]
ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline]
ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline]
ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754
ocfs2_info_handle+0x18d/0x2a0 fs/ocfs2/ioctl.c:828
ocfs2_ioctl+0x632/0x6e0 fs/ocfs2/ioctl.c:913
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583
...
[CAUSE]
ocfs2_info_freefrag_scan_chain() uses on-disk bg_bits directly as the
bitmap scan limit. The coherent path reads group descriptors through
ocfs2_read_group_descriptor(), which validates the descriptor before
use. The non-coherent path uses ocfs2_read_blocks_sync() instead and
skips that validation, so an impossible bg_bits value can drive the
bitmap walk past the end of the block.
[FIX]
Compute the bitmap capacity from the filesystem format with
ocfs2_group_bitmap_size(), report descriptors whose bg_bits exceeds
that limit, and clamp the scan to the computed capacity. This keeps the
freefrag report going while avoiding reads beyond the buffer. |
| The webp decoder can panic when processing a VP8 chunk with dimensions that do not match the canvas size. |
| Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri::XML::Document#root= validated only that the new root was a Nokogiri::XML::Node, allowing a DTD node to be set as the document root. The result is a heap use-after-free during garbage collection or finalization, leading to an invalid memory read or potentially a segfault. This vulnerability is fixed in 1.19.4. |
| Unauthenticated Other Vulnerability Type in WpEvently <= 5.3.3 versions. |
| Unauthenticated Other Vulnerability Type in WP Travel Engine <= 6.7.10 versions. |
| A flaw was found in Keycloak. A remote attacker with high privileges, such as a realm administrator configuring a malicious Lightweight Directory Access Protocol (LDAP) server or an attacker compromising an upstream LDAP server, could exploit this vulnerability. By sending a malformed LDAP password policy response during a password authentication request, the attacker can trigger an OutOfMemoryError. This causes the Keycloak Java Virtual Machine (JVM) to terminate, leading to a denial of service (DoS) for all realms on the affected node. |
| A flaw was found in Keycloak. An authenticated user with low privileges can exploit this vulnerability by sending an oversized subject_token JSON Web Token (JWT) to the TokenEndpoint. When the token exceeds a 4000-character limit, it is silently dropped, causing the system to fall back to client credentials. This allows the user to gain the permissions of the client's service account, leading to privilege escalation. |
| File Browser is a file managing interface for uploading, deleting, previewing, renaming, and editing files within a specified directory. Prior to 2.63.6, unchecked passwords maximums allow for an arbitrarily large password to be passed into the login API. This spikes CPU and memory, and after testing, crashes, heavily lags any container created, and has even made my docker daemon start to send errors with status code 500 even after the container was destroyed. This vulnerability is fixed in 2.63.6. |
| Improper input validation in the PAM AD discovery endpoints in
Devolutions Server 2026.2.4.0 through 2026.2.7.0 allows an authenticated
user with the UserGroupsView permission to coerce server-side
authentication to an attacker-controlled host, exposing PAM provider
credentials as a NTLMv2 challenge-response, via a crafted DomainName
parameter. |
