| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: resize log->one_page_buf when adopting on-disk page size
log_replay() allocates log->one_page_buf using the page size that was
chosen from the host PAGE_SIZE:
log->one_page_buf = kmalloc(log->page_size, GFP_NOFS);
Later, when a restart area is found, the log page size recorded on disk
is adopted:
t32 = le32_to_cpu(log->rst_info.r_page->sys_page_size);
if (log->page_size != t32) {
log->l_size = log->orig_file_size;
log->page_size = norm_file_page(t32, &log->l_size,
t32 == DefaultLogPageSize);
}
If the on-disk page size is larger than the size used for the initial
allocation, log->page_size grows but one_page_buf is left at its
original, smaller size. A subsequent unaligned read_log_page() then
reads log->page_size bytes into the undersized scratch buffer:
page_buf = page_off ? log->one_page_buf : *buffer;
err = ntfs_read_run_nb_ra(ni->mi.sbi, &ni->file.run, page_vbo, page_buf,
log->page_size, NULL, &log->read_ahead);
overflowing the allocation. This is reachable when mounting a dirty
NTFS volume whose log was formatted with a page size larger than the
buffer initially allocated on the mounting host (for example a 64K-log
volume mounted on a host that allocated a 4K scratch buffer).
Grow one_page_buf when the adopted on-disk page size exceeds the size
used for the initial allocation. On krealloc() failure the original
buffer is left intact and freed by the existing error path. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reject undersized DACLs before parsing ACEs
parse_dacl() limits the attacker-controlled ACE count by comparing it
with the number of minimal ACEs that fit in the DACL size. The DACL size
field is 16 bits, but the expression subtracts sizeof(struct smb_acl).
Because sizeof() is unsigned, a DACL size smaller than the ACL header
underflows to a large size_t.
A malicious client can reach this with:
SMB2_SET_INFO (InfoType=SMB2_O_INFO_SECURITY)
-> smb2_set_info_sec()
-> set_info_sec()
-> parse_sec_desc()
-> parse_dacl()
-> init_acl_state(..., 0xffff)
-> init_acl_state(..., 0xffff)
-> kmalloc_objs(..., 0xffff)
Thus a malformed security descriptor can make num_aces pass the guard
and drive large temporary ACL state and pointer-array allocations.
Reject DACLs smaller than struct smb_acl before doing the subtraction,
so the ACE count check cannot be bypassed by the underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-ioctl: fix a possible overflow in list_version_get_info
sizeof(tt->version) is 12 bytes, but the code writes 16 bytes into the
output buffer - info->vers->version[0], info->vers->version[1],
info->vers->version[2] and info->vers->next. This can cause buffer
overflow.
Fix this buffer overflow by replacing "sizeof(tt->version)" with
"sizeof(struct dm_target_versions)". |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate response sizes in ipc_validate_msg()
ipc_validate_msg() computes the expected message size for each
response type by adding (or multiplying) attacker-controlled fields
from the daemon response to a fixed struct size in unsigned int
arithmetic. Three cases can overflow:
KSMBD_EVENT_RPC_REQUEST:
msg_sz = sizeof(struct ksmbd_rpc_command) + resp->payload_sz;
KSMBD_EVENT_SHARE_CONFIG_REQUEST:
msg_sz = sizeof(struct ksmbd_share_config_response) +
resp->payload_sz;
KSMBD_EVENT_LOGIN_REQUEST_EXT:
msg_sz = sizeof(struct ksmbd_login_response_ext) +
resp->ngroups * sizeof(gid_t);
resp->payload_sz is __u32 and resp->ngroups is __s32. Each addition
can wrap in unsigned int; the multiplication by sizeof(gid_t) mixes
signed and size_t, so a negative ngroups is converted to SIZE_MAX
before the multiply. A wrapped value of msg_sz that happens to
equal entry->msg_sz bypasses the size check on the next line, and
downstream consumers (smb2pdu.c:6742 memcpy using rpc_resp->payload_sz,
kmemdup in ksmbd_alloc_user using resp_ext->ngroups) then trust the
unverified length.
Use check_add_overflow() on the RPC_REQUEST and SHARE_CONFIG_REQUEST
paths to detect integer overflow without constraining functional
payload size; userspace ksmbd-tools grows NDR responses in 4096-byte
chunks for calls like NetShareEnumAll, so a hard transport cap is
unworkable on the response side. For LOGIN_REQUEST_EXT, reject
resp->ngroups outside the signed [0, NGROUPS_MAX] range up front and
report the error from ipc_validate_msg() so it fires at the IPC
boundary; with that bound the subsequent multiplication and addition
stay well below UINT_MAX. The now-redundant ngroups check and
pr_err in ksmbd_alloc_user() are removed.
This is the response-side analogue of aab98e2dbd64 ("ksmbd: fix
integer overflows on 32 bit systems"), which hardened the request
side. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix OOB write in QUERY_INFO for compound requests
When a compound request such as READ + QUERY_INFO(Security) is received,
and the first command (READ) consumes most of the response buffer,
ksmbd could write beyond the allocated buffer while building a security
descriptor.
The root cause was that smb2_get_info_sec() checked buffer space using
ppntsd_size from xattr, while build_sec_desc() often synthesized a
significantly larger descriptor from POSIX ACLs.
This patch introduces smb_acl_sec_desc_scratch_len() to accurately
compute the final descriptor size beforehand, performs proper buffer
checking with smb2_calc_max_out_buf_len(), and uses exact-sized
allocation + iov pinning. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Compute the correct max length of the in-GHCB scratch area
When setting the length of the GHCB scratch area, and the area is in the
GHCB shared buffer, set the effective length of the scratch area to the max
possible size given the start of the guest-provided pointer, and the end of
the shared buffer.
The code was "fine" when first introduced, as KVM doesn't consult the
length of the buffer when emulating MMIO, because the passed in @len always
specifies the *max* size required. But for PSC requests, the incoming @len
is just the minimum length (to process the header), and KVM needs to know
the full size of the scratch area to avoid buffer overflows (spoiler alert).
Opportunistically rename @len => @min_len to better reflect its role. |
| EDK2 contains a vulnerability in BIOS where a user may cause “Out-of-bounds
Write”, Classic
Buffer Overflow, and “Incorrect Calculation of Buffer Size” by remote access. Successful exploitation of this vulnerability
can lead to arbitrary
code execution. It could also impact
Confidentiality,
Integrity,
and Availability. |
| Vyper before 0.2.6 contains a call stack corruption vulnerability that causes incorrect function outputs when complex types with non-base members are passed as arguments. Contracts passing multi-dimensional arrays or structs to internal or external functions receive corrupted values because the compiler assumed each subtype size is 32. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.3.0, Svc::EventManager loqQueue_internalInterfaceHandler packetization is vulnerable because EventManager accepts up to the framework LogBuffer maximum, but packet descriptor, event identifier, and time-tag metadata consume part of the larger ComBuffer and leave a smaller remaining budget for log arguments; serialization failure then reaches an assertion. When a deployment bridges events through GenericHub into EventManager and forwards a legal Fw::LogBuffer larger than EventManager remaining log-argument budget, under standard F Prime assertion handling, a legal bridged event payload aborts or resets the process, causing denial of service. This issue is fixed in version 4.3.0. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-31, a client connected to the distributed pixel cache server can send crafted pixel data that triggers an integer-size calculation error and a heap buffer overwrite, crashing the server. This issue is fixed in version 7.1.2-31. |
| Memory safety bug fixed in Thunderbird 152. This vulnerability was fixed in Firefox 152 and Thunderbird 152. |
| In the Linux kernel, the following vulnerability has been resolved:
net: pull headers in qdisc_pkt_len_segs_init()
Most ndo_start_xmit() methods expects headers of gso packets
to be already in skb->head.
net/core/tso.c users are particularly at risk, because tso_build_hdr()
does a memcpy(hdr, skb->data, hdr_len);
qdisc_pkt_len_segs_init() already does a dissection of gso packets.
Use pskb_may_pull() instead of skb_header_pointer() to make
sure drivers do not have to reimplement this.
Some malicious packets could be fed, detect them so that we can
drop them sooner with a new SKB_DROP_REASON_SKB_BAD_GSO drop_reason. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: proc: size address buffers for %pISpc output
The AF_RXRPC procfs helpers format local and remote socket addresses into
fixed 50-byte stack buffers with "%pISpc".
That is too small for the longest current-tree IPv6-with-port form the
formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a
dotted-quad tail not only for v4mapped addresses, but also for ISATAP
addresses via ipv6_addr_is_isatap().
As a result, a case such as
[ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535
is possible with the current formatter. That is 50 visible characters, so
51 bytes including the trailing NUL, which does not fit in the existing
char[50] buffers used by net/rxrpc/proc.c.
Size the buffers from the formatter's maximum textual form and switch the
call sites to scnprintf().
Changes since v1:
- correct the changelog to cite the actual maximum current-tree case
explicitly
- frame the proof around the ISATAP formatting path instead of the earlier
mapped-v4 example |
| A memory-protected ThreadX module's queue request reaches the Module Manager's dispatch layer, which decides how much of the module's buffer the privileged queue copy may touch and hands that extent to the module port's range check. A queue's `tx_queue_message_size` is a count of `ULONG`s and the copy moves that many words, so the extent is `message_size * sizeof(ULONG)` bytes.
The front-send dispatcher passed the word count itself. `tx_queue_send` and `tx_queue_receive`, either side of it in the same header, have always multiplied.
A source buffer ending `message_size` bytes into memory the module may read was therefore accepted, and `_txe_queue_front_send` then read `message_size * sizeof(ULONG)` bytes from it in privileged mode — `3 * message_size` bytes past the end of what the module is allowed to read. The words are written into the queue's message area, so a module that can receive from that queue reads them back. |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: fix size calculations for 64-bit attributes
net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use
nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and
NET_DM_ATTR_TIMESTAMP).
On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS,
nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for
64-bit alignment.
However, net_dm_packet_report_size() and net_dm_hw_packet_report_size()
used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)),
budgeting 12 bytes instead of up to 16 bytes.
This under-estimation of SKB size can lead to an skb_over_panic() when
__nla_reserve() or skb_put() is subsequently called.
Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: handle overlapping allocated ranges in fallocate
smb3_simple_fallocate_range() can skip holes when an allocated range
returned by the server starts before the current fallocate offset. The
skipped hole is not zero-filled, but fallocate still returns success. A
later write to that hole may therefore fail with ENOSPC.
The function queries allocated ranges so that it can preserve existing
contents and write zeroes only into holes. However, the server may return
a range that starts before the current fallocate offset.
For example, assume the fallocate request is [100, 400) and the only
allocated range returned by the server is [0, 200):
Request: [100, 400)
Server range: [ 0, 200) allocated
Correct:
[100, 200) allocated data, skip
[200, 400) hole, zero-fill
Current:
[100, 300) skipped
[300, 400) zero-filled afterwards
The current code adds the full server range length, 200, to the current
offset 100 and moves to 300. As a result, the hole in [200, 300) is
skipped without being zero-filled.
Fix this by advancing only over the part of the allocated range that
overlaps the current fallocate offset. Ignore ranges that end before the
current offset and reject ranges whose end offset overflows.
This also prevents a malformed range length from causing an out-of-bounds
zero-buffer read. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: reject oversized Broadcast Announcement prepend
Existing advertising instances can already hold the maximum extended
advertising payload. When hci_adv_bcast_annoucement() prepends the
Broadcast Announcement service data to that payload, the combined data
may no longer fit in the temporary buffer used to rebuild the
advertising data.
Reject that case before copying the existing payload and report the
failure through the device log. This keeps the existing advertising
data intact and avoids overrunning the temporary buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: allow subflow rcv wnd to shrink
In MPTCP connection, the `window` field in the TCP header refers to the
MPTCP-level rcv_nxt and it's right edge should not move backward. Such
constraint is enforced at DSS option generation time.
At the same time, the TCP stack ensures independently that the TCP-level
rcv wnd right's edge does not move backward. That in turn causes artificial
inflating of the MPTCP rcv window when the incoming data is acked at the
TCP level and is OoO in the MPTCP sequence space (or lands in the backlog).
As a consequence, the incoming traffic can exceed the receiver rcvbuf size
even when the sender is not misbehaving.
Prevent such scenario forcibly allowing the TCP subflow to shrink the
TCP-level rcv wnd regardless of the current netns setting. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix potential out-of-bounds access in crush_decode()
A message of type CEPH_MSG_OSD_MAP containing a crush map with at least
one bucket has two fields holding the bucket algorithm. If the values
in these two fields differ, an out-of-bounds access can occur. This is
the case because the first algorithm field (alg) is used to allocate
the correct amount of memory for a bucket of this type, while the second
algorithm field inside the bucket (b->alg) is used in the subsequent
processing.
This patch fixes the issue by adding a check that compares alg and
b->alg and aborts the processing in case they differ. Furthermore,
b->alg is set to 0 in this case, because the destruction of the crush
map also uses this field to determine the bucket type, which can again
result in an out-of-bounds access when trying to free the memory pointed
to by the fields of the bucket. To correctly free the memory allocated
for the bucket in such a case, the corresponding call to kfree is moved
from the algorithm-specific crush_destroy_bucket functions to the
generic crush_destroy_bucket(). |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix slab-out-of-bounds access in auth message processing
If a (potentially corrupted) message of type CEPH_MSG_AUTH_REPLY
contains a positive value in its result field, it is treated as an
error code by ceph_handle_auth_reply() and returned to
handle_auth_reply(). Thereafter, an attempt is made to send the
preallocated message of type CEPH_MSG_AUTH, where the returned value is
interpreted as the size of the front segment to send. If the result
value in the message is greater than the size of the memory buffer
allocated for the front segment, an out-of-bounds access occurs, and
the content of the memory region beyond this buffer is sent out.
This patch fixes the issue by treating only negative values in the
result field as errors. Positive values are therefore treated as success
in the same way as a zero value. Additionally, a BUG_ON is added to
__send_prepared_auth_request() comparing the len parameter to
front_alloc_len to prevent sending the message if it exceeds the bounds
of the allocation and to make it easier to catch any logic flaws leading
to this. |
