Export limit exceeded: 421036 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (6790 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68322 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rds: Fix inet6_addr_lst NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, inet6_addr_lst is never initialized because inet6_init() exits before addrconf_init() is called to initialize it. An attempt to bind an RDS socket to an ipv6 address results in a crash in __ipv6_chk_addr_and_flags() KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:__ipv6_chk_addr_and_flags+0x1df/0x7e0 Call Trace: <TASK> ipv6_chk_addr+0x3b/0x50 rds_tcp_laddr_check+0x155/0x3b0 [rds_tcp] rds_trans_get_preferred+0x15d/0x2d0 [rds] ? trace_hardirqs_on+0x2d/0x110 rds_bind+0x1433/0x1d60 [rds] ? rds_remove_bound+0xd50/0xd50 [rds] ? aa_af_perm+0x250/0x250 ? __might_fault+0xde/0x190 ? __sys_bind+0x1dc/0x210 __sys_bind+0x1dc/0x210 ? __ia32_sys_socketpair+0x100/0x100 ? restore_fpregs_from_fpstate+0x53/0x100 __x64_sys_bind+0x73/0xb0 ? syscall_enter_from_user_mode+0x1c/0x50 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f47f8269ea9 </TASK> The following code reproduces the issue: struct sockaddr_in6 addr; s = socket(PF_RDS, SOCK_SEQPACKET, 0); memset(&addr, 0, sizeof(addr)); inet_pton(AF_INET6, ADDRESS, &addr.sin6_addr); addr.sin6_family = AF_INET6; addr.sin6_port = htons(PORT); bind(s, &addr, sizeof(addr)); Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2026-68309 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: connac: fix possible NULL-pointer deref in mt76_connac_mcu_uni_bss_he_tlv() mt76_connac_get_he_phy_cap routine can theoretically return NULL so check cap pointer before dereferencing it. | ||||
| CVE-2026-68248 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Return NULL on error in active_instance Avoid returning &node->base when node is NULL due to OOM during GFP_ATOMIC allocation. Discovered using AI-assisted static analysis confirmed by Intel Product Security. (cherry picked from commit 6029bc064f0b1bac184203a50fbaaf070fa18832) | ||||
| CVE-2026-68243 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Fix NULL deref in I915_CONTEXT_PARAM_SSEU Setting context engine slot N into I915_ENGINE_CLASS_INVALID / I915_ENGINE_CLASS_INVALID_NONE and attempting to apply I915_CONTEXT_PARAM_SSEU to the same slot N will deref NULL. Fix that. Discovered using AI-assisted static analysis confirmed by Intel Product Security. (cherry picked from commit 36eda5b5c2d40da41cc0a5403c26986237cf9e87) | ||||
| CVE-2026-68226 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: cx23885: add ioremap return check and cleanup Add a check for the return value of pci_ioremap_bar() in cx23885_dev_setup(). If ioremap for BAR0 fails, release the already allocated PCI memory region, decrement the device count, and return -ENODEV. This prevents a potential null pointer dereference and ensures proper cleanup on memory mapping failure. | ||||
| CVE-2026-68197 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix NULL dereference when the AP has HT-cap but no HT-oper mwifiex_tdls_add_ht_oper() gates its follow-the-AP-bandwidth path on bss_desc->bcn_ht_cap being present, but then dereferences a different pointer, bss_desc->bcn_ht_oper: if (ISSUPP_CHANWIDTH40(priv->adapter->hw_dot_11n_dev_cap) && bss_desc->bcn_ht_cap && ISALLOWED_CHANWIDTH40(bss_desc->bcn_ht_oper->ht_param)) bcn_ht_cap and bcn_ht_oper are populated independently while parsing the associated AP's beacon in mwifiex_update_bss_desc_with_ie(): an AP that advertises an HT Capabilities element but no HT Operation element leaves bcn_ht_cap non-NULL and bcn_ht_oper NULL. Setting up a TDLS link to a peer while associated to such an AP then dereferences the NULL bcn_ht_oper and crashes the kernel. Every other bcn_ht_oper user in the driver NULL-checks it first. Guard on the pointer that is actually dereferenced. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-68186 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: set have_execfd only once the interpreter is opened load_misc_binary() raises bprm->have_execfd as soon as it sees the 'O' (or 'C') flag. This happens well before it opens the interpreter. If that open fails the flag stays set on the bprm. binfmt_misc is at the head of the format list so an interpreter open failure that returns -ENOEXEC lets the search fall through to a later format. This means it runs the matched binary directly having never staged an interpreter. So bprm->executable is NULL while have_execfd falsely claims a descriptor is present. Consequently, begin_new_exec() dereferences the missing executable: would_dump(bprm, bprm->executable); and NULL derefs. Had it not, the hand-off later in the same function would have failed anyway. FD_ADD(0, bprm->executable) rejects a NULL file with -ENOMEM. Both sites are past the point of no return so the exec cannot be unwound either way. This can be reached by unprivileged users as binfmt_misc can be mounted in user namespaces. So a user can register an 'O' entry whose interpreter lives on a FUSE mount, have the FUSE server fail the open with -ENOEXEC and execute a native ELF file that matches the entry. have_execfd only means anything alongside the executable it describes which is not set until the interpreter has been opened and staged. So lets raise it there, next to execfd_creds, which is already set at that point. An open failure now leaves it clear, so the fallback format derives credentials from the binary and emits no AT_EXECFD, as it would for any native exec. The argv rewrite load_misc_binary() performs before the open is still not undone. This means the binary sees the interpreter path in argv[0] and its own path in argv[1] but that predates this change and only became observable once the exec stopped faulting. | ||||
| CVE-2026-68139 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Use sender devcom for MPV master-up After PCIe DPC recovery, mlx5 reloads the affected functions and replays multiport affiliation events. In the reported failure, the first relevant device error was: pcieport 0000:10:01.1: DPC: containment event pcieport 0000:10:01.1: PCIe Bus Error: severity=Uncorrected (Fatal) pcieport 0000:10:01.1: [ 5] SDES (First) mlx5 recovered the PCI functions and resumed 0000:11:00.1. During that resume, RDMA multiport binding replayed MLX5_DRIVER_EVENT_AFFILIATION_DONE and mlx5e sent MPV_DEVCOM_MASTER_UP. The host then panicked with: BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core] RDI: 0000000000000000 Call trace included: mlx5_devcom_comp_set_ready mlx5e_devcom_event_mpv mlx5_devcom_send_event mlx5_ib_bind_slave_port mlx5r_mp_probe mlx5_pci_resume MPV devcom registration publishes mlx5e private data to the component peer list before mlx5e_devcom_init_mpv() stores the returned component device in priv->devcom. A concurrent master-up event can therefore reach a peer whose private data is visible but whose priv->devcom backpointer is still NULL. MPV_DEVCOM_MASTER_UP already carries the sender/master mlx5e private data as event_data. The ready bit is stored on the shared devcom component, not on an individual peer. Use the sender devcom when marking the MPV component ready. This preserves the readiness transition while avoiding a NULL dereference of the peer devcom pointer during affiliation replay after PCI error recovery. | ||||
| CVE-2026-68111 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx9: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit b71604f8685b0eba07866f4e8dc30f93e1931054) | ||||
| CVE-2026-64593 | 1 Linux | 1 Linux Kernel | 2026-11-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: do not trim a device which is not writeable [BUG] There is a bug report that btrfs/242 can randomly fail with the following NULL pointer dereference: run fstests btrfs/242 at 2026-06-01 10:25:08 BTRFS: device fsid d4d7f234-487c-4787-88e4-47a8b68c9874 devid 1 transid 9 /dev/sdc (8:32) scanned by mount (122609) BTRFS info (device sdc): first mount of filesystem d4d7f234-487c-4787-88e4-47a8b68c9874 BTRFS info (device sdc): using crc32c checksum algorithm BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing BTRFS info (device sdc): allowing degraded mounts BTRFS info (device sdc): turning on async discard BTRFS info (device sdc): enabling free space tree Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 user pgtable: 4k pages, 48-bit VAs, pgdp=000000013fd6b000 CPU: 4 UID: 0 PID: 122625 Comm: fstrim Not tainted 7.0.10-2-default #1 PREEMPT(full) openSUSE Tumbleweed e9a5f6b24978fba3bf015a992f865837fdfff3dd Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250812-19.fc42 08/12/2025 pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : btrfs_trim_fs+0x34c/0xa00 [btrfs] lr : btrfs_trim_fs+0x1f0/0xa00 [btrfs] Call trace: btrfs_trim_fs+0x34c/0xa00 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] (P) btrfs_ioctl_fitrim+0xe8/0x178 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] btrfs_ioctl+0xdd4/0x2bd8 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] __arm64_sys_ioctl+0xac/0x108 invoke_syscall.constprop.0+0x5c/0xd0 el0_svc_common.constprop.0+0x40/0xf0 do_el0_svc+0x24/0x40 el0_svc+0x40/0x1d0 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8 Code: 17ffff83 f94017e0 f9002be0 f9402ea0 (f9400c00) ---[ end trace 0000000000000000 ]--- Also the reporter is very kind to test the following ASSERT() added to btrfs_trim_free_extents_throttle(): ASSERT(device->bdev, "devid=%llu path=%s dev_state=0x%lx\n", device->devid, btrfs_dev_name(device), device->dev_state); And it shows the following output: assertion failed: device->bdev, in extent-tree.c:6630 (devid=2 path=/dev/sdd dev_state=0x82) Which means the device->bdev is NULL, and the dev_state is BTRFS_DEV_STATE_IN_FS_METADATA | BTRFS_DEV_STATE_ITEM_FOUND, without BTRFS_DEV_STATE_WRITEABLE flag set. [CAUSE] The pc points to the following call chain: btrfs_trim_fs() |- btrfs_trim_free_extents() |- btrfs_trim_free_extents_throttle() |- bdev_max_discard_sectors(device->bdev) So the NULL pointer dereference is caused by device->bdev being NULL. This looks impossible by a quick glance, as just before calling btrfs_trim_free_extents_throttle(), we have skipped any device that has BTRFS_DEV_STATE_MISSING flag set. However in this particular case, there is a window where the missing device is later re-scanned, causing btrfs to remove the BTRFS_DEV_STATE_MISSING flag: btrfs_control_ioctl() |- btrfs_scan_one_device() |- device_list_add() |- rcu_assign_pointer(device->name, name); | This updates the missing device's path to the new good path. | |- clear_bit(BTRFS_DEV_STATE_MISSING, &device->dev_state) This removes the BTRFS_DEV_STATE_MISSING flag. This allows the missing device to re-appear and clear the BTRFS_DEV_STATE_MISSING flag. However the device still does not have the BTRFS_DEV_STATE_WRITEABLE flag set, nor is its bdev pointer updated. The bdev pointer remains NULL, triggering the crash later. [FIX] This is a big de-synchronization between BTRFS_DEV_STATE_MISSING and device->bdev pointer, and shows a gap in btrfs's re-appearing-device handling. The proper handling of re-appearing device will need quite some extra work, which is out of the context of this small ---truncated--- | ||||
| CVE-2026-64569 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mpls: fix NULL deref in mpls_valid_fib_dump_req() on CONFIG_INET=n On CONFIG_INET=n builds, mpls_valid_fib_dump_req() walks the parsed attribute table itself instead of calling ip_valid_fib_dump_req(). The RTA_OIF arm passes tb[RTA_OIF] to nla_get_u32() without checking it is present, so an RTM_GETROUTE dump for AF_MPLS with strict checking and no RTA_OIF hits a NULL dereference. RTM_GETROUTE is RTNL_KIND_GET, which rtnetlink_rcv_msg() permits without CAP_NET_ADMIN, so an unprivileged user can trigger it. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:mpls_valid_fib_dump_req (net/mpls/af_mpls.c:2189) Call Trace: mpls_dump_routes (net/mpls/af_mpls.c:2236) netlink_dump (net/netlink/af_netlink.c:2331) __netlink_dump_start (net/netlink/af_netlink.c:2446) rtnetlink_rcv_msg (net/core/rtnetlink.c:7033) netlink_rcv_skb (net/netlink/af_netlink.c:2556) netlink_unicast (net/netlink/af_netlink.c:1345) netlink_sendmsg (net/netlink/af_netlink.c:1900) __sock_sendmsg (net/socket.c:790) ____sys_sendmsg (net/socket.c:2684) ___sys_sendmsg (net/socket.c:2738) __sys_sendmsg (net/socket.c:2770) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Skip unset attributes, as ip_valid_fib_dump_req() does. | ||||
| CVE-2026-64542 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: ndisc: fix NULL deref in accept_untracked_na() accept_untracked_na() re-fetches the inet6_dev with __in6_dev_get(dev) and dereferences idev->cnf.accept_untracked_na without a NULL check, even though its only caller ndisc_recv_na() already fetched and NULL-checked idev for the same device. Both reads of dev->ip6_ptr run in the same RCU read-side critical section, but a concurrent addrconf_ifdown() can clear dev->ip6_ptr between them: lowering the MTU below IPV6_MIN_MTU calls addrconf_ifdown() without the synchronize_net() that orders the unregister path, so the re-fetch returns NULL and oopses: BUG: KASAN: null-ptr-deref in ndisc_recv_na (net/ipv6/ndisc.c:974) Read of size 4 at addr 0000000000000364 Call Trace: <IRQ> ndisc_recv_na (net/ipv6/ndisc.c:974) icmpv6_rcv (net/ipv6/icmp.c:1193) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:479) ip6_input_finish (net/ipv6/ip6_input.c:534) ip6_input (net/ipv6/ip6_input.c:545) ip6_mc_input (net/ipv6/ip6_input.c:635) ipv6_rcv (net/ipv6/ip6_input.c:351) </IRQ> It is reachable by an unprivileged user via a network namespace. Pass the caller's already validated idev instead of re-fetching it; the idev stays alive for the whole RCU critical section, so it is safe even after dev->ip6_ptr has been cleared. | ||||
| CVE-2026-64538 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix null-ptr-deref in fib6_nh_mtu_change(). fib6_nh_mtu_change() re-fetches idev via __in6_dev_get(arg->dev) and dereferences idev->cnf.mtu6 without a NULL check. addrconf_ifdown() clears dev->ip6_ptr with RCU_INIT_POINTER() after rt6_disable_ip() has released tb6_lock, so the RA-driven MTU walk can observe a NULL idev and oops. The caller rt6_mtu_change_route() guards its own __in6_dev_get(), but this re-fetch is unguarded; nexthop-backed routes survive addrconf_ifdown()'s flush, so the walk still reaches it after ip6_ptr is nulled. Return 0 when idev is NULL, matching rt6_mtu_change_route() and the fib6_mtu() fix in commit 5ad509c1fdad ("ipv6: Fix null-ptr-deref in fib6_mtu()."). Oops: general protection fault, ... KASAN: null-ptr-deref in range [0x00000000000002a8-0x00000000000002af] RIP: 0010:fib6_nh_mtu_change+0x203/0x990 rt6_mtu_change_route+0x141/0x1d0 __fib6_clean_all+0xd0/0x160 rt6_mtu_change+0xb4/0x100 ndisc_router_discovery+0x24b5/0x2cb0 icmpv6_rcv+0x12e9/0x1710 ipv6_rcv+0x39b/0x410 | ||||
| CVE-2026-64484 | 1 Linux | 1 Linux Kernel | 2026-11-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: es1938: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_es1938_mixer() does not check the return value before dereferencing the pointer, which can lead to a NULL pointer dereference. Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails. | ||||
| CVE-2026-64427 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: logitech-dj: Fix maxfield check in DJ short report validation Commit b6a57912854e ("HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT related user initiated OOB write") added validation for the DJ short output report, but the error path dereferences rep->field[0] even when rep->maxfield is zero. Commit 8b9a097eb2fc ("HID: logitech-dj: fix wrong detection of bad DJ_SHORT output report") made the check conditional on rep being present, but a crafted descriptor can still create report ID 0x20 with only padding output items. hid-core registers the report, ignores the padding field, and leaves rep->maxfield as zero. In that case the validation enters the rep->maxfield < 1 branch and then dereferences rep->field[0]->report_count while printing the error message, causing a NULL pointer dereference during probe. This is reproducible with uhid by emulating a Logitech receiver with a padding-only DJ short output report: BUG: KASAN: null-ptr-deref in logi_dj_probe+0xb1/0x754 [hid_logitech_dj] Read of size 4 at addr 0000000000000028 by task kworker/4:1/129 ... Call Trace: logi_dj_probe+0xb1/0x754 [hid_logitech_dj] hid_device_probe+0x329/0x3f0 [hid] really_probe+0x162/0x570 __device_attach+0x137/0x2c0 bus_probe_device+0x38/0xc0 device_add+0xa56/0xce0 hid_add_device+0x19c/0x280 [hid] uhid_device_add_worker+0x2c/0xb0 [uhid] Reject the zero-field report before printing the field report_count. | ||||
| CVE-2026-64405 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn() hci_abort_conn() read hci_skb_event(hdev->sent_cmd) when a connection was pending, but hdev->sent_cmd can be NULL while req_status is still HCI_REQ_PEND, leading to a NULL pointer dereference and a general protection fault from the hci_rx_work() receive path. Instead of inspecting hdev->sent_cmd, track the in-flight create connection command with a new per-connection HCI_CONN_CREATE flag and route all cancellation through hci_cancel_connect_sync(), which dispatches to a dedicated per-type cancel function. The create command is in exactly one of two states: still queued, or in flight. The cancel function holds cmd_sync_work_lock across the whole decision: the worker takes this lock to dequeue every entry, so while it is held a queued command cannot start running and an in-flight command cannot complete and let the next command become pending. This keeps the flag test and hci_cmd_sync_cancel() atomic with respect to the worker, so a queued command is simply dequeued, and an in-flight command owned by this connection is cancelled without the risk of cancelling an unrelated command that became pending in the meantime. CIS uses the same flag mechanism via HCI_CONN_CREATE_CIS but cannot be dequeued per-connection. hci_acl_create_conn_sync() and hci_le_create_conn_sync() clear HCI_CONN_CREATE after the create command completes, but the command status handler can free conn via hci_conn_del() (for example when the controller rejects the connection) while the worker is still blocked on the connection complete event. Hold a reference on conn across the create command so the flag can be cleared without a use-after-free. | ||||
| CVE-2026-64404 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: avoid NULL deref of conn in iso_conn_big_sync() iso_conn_big_sync() drops the socket lock to call hci_get_route() and then re-acquires it, but dereferences iso_pi(sk)->conn->hcon afterwards without re-checking that conn is still valid. While the lock is dropped, the connection can be torn down under the same socket lock: iso_disconn_cfm() -> iso_conn_del() -> iso_chan_del() sets iso_pi(sk)->conn to NULL (and the broadcast teardown path can also clear conn->hcon on its own). When iso_conn_big_sync() re-acquires the lock and reads conn->hcon, conn may be NULL, causing a NULL pointer dereference (hcon is the first member of struct iso_conn). This path is reached from iso_sock_recvmsg() for a PA-sync broadcast sink socket (BT_SK_DEFER_SETUP | BT_SK_PA_SYNC), so the dropped-lock window can race with connection teardown driven by controller events. Re-validate iso_pi(sk)->conn and its hcon after re-acquiring the socket lock and bail out if the connection went away, as already done in the sibling iso_sock_rebind_bc(). | ||||
| CVE-2026-64373 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: Fix hotplug-suspend race during reboot During system reboot, cpufreq_suspend() is called via the kernel_restart() -> device_shutdown() path. Unlike the normal system suspend path, the reboot path does not call freeze_processes(), so userspace processes and kernel threads remain active. This allows CPU hotplug operations to run concurrently with cpufreq_suspend(). The original code has no synchronization with CPU hotplug, leading to a race condition where governor_data can be freed by the hotplug path while cpufreq_suspend() is still accessing it, resulting in a null pointer dereference: Unable to handle kernel NULL pointer dereference Call Trace: do_kernel_fault+0x28/0x3c cpufreq_suspend+0xdc/0x160 device_shutdown+0x18/0x200 kernel_restart+0x40/0x80 arm64_sys_reboot+0x1b0/0x200 Fix this by adding cpus_read_lock()/cpus_read_unlock() to cpufreq_suspend() to block CPU hotplug operations while suspend is in progress. [ rjw: Changelog edits ] | ||||
| CVE-2026-64346 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: udc: Fix use-after-free in gadget_match_driver The udc structure acts as the management structure for the gadget, but their lifecycles are decoupled. A race condition exists where usb_del_gadget() frees the udc memory (e.g., via mode-switch work) while gadget_match_driver() concurrently accesses the freed udc memory (e.g., via configfs), causing a Use-After-Free (UAF) that triggers a NULL pointer dereference when the freed memory is zeroed: [39430.908615][ T1171] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [39430.911397][ T1171] pc : __pi_strcmp+0x20/0x140 [39430.911441][ T1171] lr : gadget_match_driver+0x34/0x60 ... [39430.911890][ T1171] usb_gadget_register_driver_owner+0x50/0xf8 [39430.911910][ T1171] gadget_dev_desc_UDC_store+0xf4/0x140 [39430.931308][ T1171] configfs_write_iter+0xec/0x134 [39430.957058][ T1171] Workqueue: events_freezable __dwc3_set_mode [39430.957287][ T1171] dwc3_gadget_exit+0x34/0x8c [39430.957304][ T1171] __dwc3_set_mode+0xc0/0x664 Fix this by ensuring the udc structure remains allocated until the gadget is released. To achieve this, introduce a new usb_gadget_release() routine to the core. When the gadget is added, usb_add_gadget() stores the gadget's release routine in the udc structure and takes a reference to the udc. When the gadget is released, usb_gadget_release() drops the reference to the udc and then calls the gadget's release routine. | ||||
| CVE-2026-64331 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usbip: vudc: fix NULL deref in vep_dequeue() vep_alloc_request() wasn't initializing vrequest->udc, so cancellations on the FunctionFS AIO path were arriving in vep_dequeue without a valid UDC reference. Since vrequest->udc is never actually properly used anywhere, we opt to remove it, and update vep_dequeue to obtain a reference to the udc with ep_to_vudc(), consistent with the other vep_ ops. AFAICT this bug has existed for ~10 years. Seems that nobody has really stressed the FunctionFS AIO path on usbip's vudc. I tested this fix in a QEMU aarch64 guest driving FunctionFS endpoints via AIO. Before the fix, running `usbip attach` from the host would cause the guest to oops with the following backtrace: Call trace: vep_dequeue+0x1c/0xe4 (P) usb_ep_dequeue+0x14/0x20 ffs_aio_cancel+0x24/0x34 __arm64_sys_io_cancel+0xb0/0x124 do_el0_svc+0x68/0x100 el0_svc+0x18/0x5c el0t_64_sync_handler+0x98/0xdc el0t_64_sync+0x154/0x158 | ||||