| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in sssd. A local user can cause a Denial of Service (DoS) by exhausting the responder service's available file descriptors (system handles used for open connections). By opening and maintaining many concurrent connections to a responder socket while continuing to queue new connection attempts, an attacker can trigger an unthrottled retry loop. This condition leads to high CPU utilization and stalls the service, preventing legitimate identity and authentication requests from being processed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop
l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED
state to support L2CAP reconfiguration (e.g. MTU changes). However,
since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from
the initial configuration, the reconfiguration path falls through to
l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and
retrans_list without freeing the previous allocations and sets
chan->sdu to NULL without freeing the existing skb. This leaks all
previously allocated ERTM resources.
Additionally, l2cap_parse_conf_req() does not validate the minimum
value of remote_mps derived from the RFC max_pdu_size option. A zero
value propagates to l2cap_segment_sdu() where pdu_len becomes zero,
causing the while loop to never terminate since len is never
decremented, exhausting all available memory.
Fix the double-init by skipping l2cap_ertm_init() and
l2cap_chan_ready() when the channel is already in BT_CONNECTED state,
while still allowing the reconfiguration parameters to be updated
through l2cap_parse_conf_req(). Also add a pdu_len zero check in
l2cap_segment_sdu() as a safeguard. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: core: fix infinite loop in handle_tx() for PORT_UNKNOWN
uart_write_room() and uart_write() behave inconsistently when
xmit_buf is NULL (which happens for PORT_UNKNOWN ports that were
never properly initialized):
- uart_write_room() returns kfifo_avail() which can be > 0
- uart_write() checks xmit_buf and returns 0 if NULL
This inconsistency causes an infinite loop in drivers that rely on
tty_write_room() to determine if they can write:
while (tty_write_room(tty) > 0) {
written = tty->ops->write(...);
// written is always 0, loop never exits
}
For example, caif_serial's handle_tx() enters an infinite loop when
used with PORT_UNKNOWN serial ports, causing system hangs.
Fix by making uart_write_room() also check xmit_buf and return 0 if
it's NULL, consistent with uart_write().
Reproducer: https://gist.github.com/mrpre/d9a694cc0e19828ee3bc3b37983fde13 |
| In the Linux kernel, the following vulnerability has been resolved:
can: ucan: Fix infinite loop from zero-length messages
If a broken ucan device gets a message with the message length field set
to 0, then the driver will loop for forever in
ucan_read_bulk_callback(), hanging the system. If the length is 0, just
skip the message and go on to the next one.
This has been fixed in the kvaser_usb driver in the past in commit
0c73772cd2b8 ("can: kvaser_usb: leaf: Fix potential infinite loop in
command parsers"), so there must be some broken devices out there like
this somewhere. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add xmit recursion limit to tunnel xmit functions
Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own
recursion limit. When a bond device in broadcast mode has GRE tap
interfaces as slaves, and those GRE tunnels route back through the
bond, multicast/broadcast traffic triggers infinite recursion between
bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing
kernel stack overflow.
The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not
sufficient because tunnel recursion involves route lookups and full IP
output, consuming much more stack per level. Use a lower limit of 4
(IP_TUNNEL_RECURSION_LIMIT) to prevent overflow.
Add recursion detection using dev_xmit_recursion helpers directly in
iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel
paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.).
Move dev_xmit_recursion helpers from net/core/dev.h to public header
include/linux/netdevice.h so they can be used by tunnel code.
BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160
Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
__build_flow_key.constprop.0 (net/ipv4/route.c:515)
ip_rt_update_pmtu (net/ipv4/route.c:1073)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
mld_sendpack
mld_ifc_work
process_one_work
worker_thread
</TASK> |
| P-Net before 1.0.3 enters an infinite loop when handling a read request for the PDPortDataCheck record with subslot 0 (whole module). The loop over the ports never advanced to the next port, so the request never completes and the device stops responding. A remote unauthenticated attacker can use this to cause a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: add cluster chain loop check for dir
An infinite loop may occur if the following conditions occur due to
file system corruption.
(1) Condition for exfat_count_dir_entries() to loop infinitely.
- The cluster chain includes a loop.
- There is no UNUSED entry in the cluster chain.
(2) Condition for exfat_create_upcase_table() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and up-case table entry in the cluster
chain of the root directory.
(3) Condition for exfat_load_bitmap() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and bitmap entry in the cluster chain
of the root directory.
(4) Condition for exfat_find_dir_entry() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
(5) Condition for exfat_check_dir_empty() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
- All files and sub-directories under the directory are deleted.
This commit adds checks to break the above infinite loop. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: prevent infinite loop in rt6_nlmsg_size()
While testing prior patch, I was able to trigger
an infinite loop in rt6_nlmsg_size() in the following place:
list_for_each_entry_rcu(sibling, &f6i->fib6_siblings,
fib6_siblings) {
rt6_nh_nlmsg_size(sibling->fib6_nh, &nexthop_len);
}
This is because fib6_del_route() and fib6_add_rt2node()
uses list_del_rcu(), which can confuse rcu readers,
because they might no longer see the head of the list.
Restart the loop if f6i->fib6_nsiblings is zero. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible infinite loop in fib6_info_uses_dev()
fib6_info_uses_dev() seems to rely on RCU without an explicit
protection.
Like the prior fix in rt6_nlmsg_size(),
we need to make sure fib6_del_route() or fib6_add_rt2node()
have not removed the anchor from the list, or we risk an infinite loop. |
| A flaw was found in libcupsfilters. The cfIEEE1284NormalizeMakeModel() function enters an infinite loop when processing a printer-advertised IEEE-1284 device ID with an empty model field, causing sustained CPU consumption. A network-adjacent attacker could exploit this by broadcasting a specially crafted printer advertisement, leading to denial of service. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.20.1, calling PdfWriter.find_outline_item on a crafted PDF with a cyclic outline hierarchy can enter an infinite loop and block the current process. This issue is fixed in version 6.20.1. |
| Kafka Streams derives its stream-time clock from record timestamps. PunctuationSchedule.next() computed the next punctuation time as timestamp + (intervalsMissed + 1) * interval with no overflow check. A record with a timestamp at or near Long.MAX_VALUE advances stream time to that value, so the next stream-time punctuation overflows to a negative time. PunctuationQueue then re-queues that time and loops on it indefinitely while holding a lock, stalling the StreamThread.
Impact:
A single record is enough. The affected StreamThread stops processing, and because the record stays in the topic the hang returns on restart; an application whose partitions are all affected becomes unresponsive. Only the Streams application is affected, not the brokers or the cluster. Triggering it needs write access to a source topic whose topology uses stream-time punctuation, and a broker that stores the record: brokers from Apache Kafka 4.0.0 reject such a timestamp by default (log.message.timestamp.after.max.ms, one hour), so it is reachable only on older brokers or where that bound has been relaxed.
Mitigation:
Upgrade Kafka Streams to 4.2.2, 4.3.2, or 4.4.0. As defense in depth, keep log.message.timestamp.after.max.ms bounded on source topics and restrict write access to them.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: the next punctuation time is computed with overflow-checked arithmetic (clamped to Long.MAX_VALUE), and a rescheduled punctuation is re-queued only when its time moves forward. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.20.1, removing an object from a crafted cyclic PDF tree, such as an outline item, can enter an infinite loop and block the current process. This issue is fixed in version 6.20.1. |
| In the Linux kernel, the following vulnerability has been resolved:
page_pool: avoid infinite loop to schedule delayed worker
We noticed the kworker in page_pool_release_retry() was waken
up repeatedly and infinitely in production because of the
buggy driver causing the inflight less than 0 and warning
us in page_pool_inflight()[1].
Since the inflight value goes negative, it means we should
not expect the whole page_pool to get back to work normally.
This patch mitigates the adverse effect by not rescheduling
the kworker when detecting the inflight negative in
page_pool_release_retry().
[1]
[Mon Feb 10 20:36:11 2025] ------------[ cut here ]------------
[Mon Feb 10 20:36:11 2025] Negative(-51446) inflight packet-pages
...
[Mon Feb 10 20:36:11 2025] Call Trace:
[Mon Feb 10 20:36:11 2025] page_pool_release_retry+0x23/0x70
[Mon Feb 10 20:36:11 2025] process_one_work+0x1b1/0x370
[Mon Feb 10 20:36:11 2025] worker_thread+0x37/0x3a0
[Mon Feb 10 20:36:11 2025] kthread+0x11a/0x140
[Mon Feb 10 20:36:11 2025] ? process_one_work+0x370/0x370
[Mon Feb 10 20:36:11 2025] ? __kthread_cancel_work+0x40/0x40
[Mon Feb 10 20:36:11 2025] ret_from_fork+0x35/0x40
[Mon Feb 10 20:36:11 2025] ---[ end trace ebffe800f33e7e34 ]---
Note: before this patch, the above calltrace would flood the
dmesg due to repeated reschedule of release_dw kworker. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: fix lockup on tx to unregistering netdev with carrier
Commit in a fixes tag attempted to fix the issue in the following
sequence of calls:
do_output
-> ovs_vport_send
-> dev_queue_xmit
-> __dev_queue_xmit
-> netdev_core_pick_tx
-> skb_tx_hash
When device is unregistering, the 'dev->real_num_tx_queues' goes to
zero and the 'while (unlikely(hash >= qcount))' loop inside the
'skb_tx_hash' becomes infinite, locking up the core forever.
But unfortunately, checking just the carrier status is not enough to
fix the issue, because some devices may still be in unregistering
state while reporting carrier status OK.
One example of such device is a net/dummy. It sets carrier ON
on start, but it doesn't implement .ndo_stop to set the carrier off.
And it makes sense, because dummy doesn't really have a carrier.
Therefore, while this device is unregistering, it's still easy to hit
the infinite loop in the skb_tx_hash() from the OVS datapath. There
might be other drivers that do the same, but dummy by itself is
important for the OVS ecosystem, because it is frequently used as a
packet sink for tcpdump while debugging OVS deployments. And when the
issue is hit, the only way to recover is to reboot.
Fix that by also checking if the device is running. The running
state is handled by the net core during unregistering, so it covers
unregistering case better, and we don't really need to send packets
to devices that are not running anyway.
While only checking the running state might be enough, the carrier
check is preserved. The running and the carrier states seem disjoined
throughout the code and different drivers. And other core functions
like __dev_direct_xmit() check both before attempting to transmit
a packet. So, it seems safer to check both flags in OVS as well. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: give up on paths longer than PATH_MAX
If the full path to be built by ceph_mdsc_build_path() happens to be
longer than PATH_MAX, then this function will enter an endless (retry)
loop, effectively blocking the whole task. Most of the machine
becomes unusable, making this a very simple and effective DoS
vulnerability.
I cannot imagine why this retry was ever implemented, but it seems
rather useless and harmful to me. Let's remove it and fail with
ENAMETOOLONG instead. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix an infinite loop error when len is 0 in tcp_bpf_recvmsg_parser()
When the buffer length of the recvmsg system call is 0, we got the
flollowing soft lockup problem:
watchdog: BUG: soft lockup - CPU#3 stuck for 27s! [a.out:6149]
CPU: 3 PID: 6149 Comm: a.out Kdump: loaded Not tainted 6.2.0+ #30
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:remove_wait_queue+0xb/0xc0
Code: 5e 41 5f c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 57 <41> 56 41 55 41 54 55 48 89 fd 53 48 89 f3 4c 8d 6b 18 4c 8d 73 20
RSP: 0018:ffff88811b5978b8 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff88811a7d3780 RCX: ffffffffb7a4d768
RDX: dffffc0000000000 RSI: ffff88811b597908 RDI: ffff888115408040
RBP: 1ffff110236b2f1b R08: 0000000000000000 R09: ffff88811a7d37e7
R10: ffffed10234fa6fc R11: 0000000000000001 R12: ffff88811179b800
R13: 0000000000000001 R14: ffff88811a7d38a8 R15: ffff88811a7d37e0
FS: 00007f6fb5398740(0000) GS:ffff888237180000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000000 CR3: 000000010b6ba002 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tcp_msg_wait_data+0x279/0x2f0
tcp_bpf_recvmsg_parser+0x3c6/0x490
inet_recvmsg+0x280/0x290
sock_recvmsg+0xfc/0x120
____sys_recvmsg+0x160/0x3d0
___sys_recvmsg+0xf0/0x180
__sys_recvmsg+0xea/0x1a0
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
The logic in tcp_bpf_recvmsg_parser is as follows:
msg_bytes_ready:
copied = sk_msg_recvmsg(sk, psock, msg, len, flags);
if (!copied) {
wait data;
goto msg_bytes_ready;
}
In this case, "copied" always is 0, the infinite loop occurs.
According to the Linux system call man page, 0 should be returned in this
case. Therefore, in tcp_bpf_recvmsg_parser(), if the length is 0, directly
return. Also modify several other functions with the same problem. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix task hung in ext4_xattr_delete_inode
Syzbot reported a hung task problem:
==================================================================
INFO: task syz-executor232:5073 blocked for more than 143 seconds.
Not tainted 6.2.0-rc2-syzkaller-00024-g512dee0c00ad #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-exec232 state:D stack:21024 pid:5073 ppid:5072 flags:0x00004004
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5244 [inline]
__schedule+0x995/0xe20 kernel/sched/core.c:6555
schedule+0xcb/0x190 kernel/sched/core.c:6631
__wait_on_freeing_inode fs/inode.c:2196 [inline]
find_inode_fast+0x35a/0x4c0 fs/inode.c:950
iget_locked+0xb1/0x830 fs/inode.c:1273
__ext4_iget+0x22e/0x3ed0 fs/ext4/inode.c:4861
ext4_xattr_inode_iget+0x68/0x4e0 fs/ext4/xattr.c:389
ext4_xattr_inode_dec_ref_all+0x1a7/0xe50 fs/ext4/xattr.c:1148
ext4_xattr_delete_inode+0xb04/0xcd0 fs/ext4/xattr.c:2880
ext4_evict_inode+0xd7c/0x10b0 fs/ext4/inode.c:296
evict+0x2a4/0x620 fs/inode.c:664
ext4_orphan_cleanup+0xb60/0x1340 fs/ext4/orphan.c:474
__ext4_fill_super fs/ext4/super.c:5516 [inline]
ext4_fill_super+0x81cd/0x8700 fs/ext4/super.c:5644
get_tree_bdev+0x400/0x620 fs/super.c:1282
vfs_get_tree+0x88/0x270 fs/super.c:1489
do_new_mount+0x289/0xad0 fs/namespace.c:3145
do_mount fs/namespace.c:3488 [inline]
__do_sys_mount fs/namespace.c:3697 [inline]
__se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fa5406fd5ea
RSP: 002b:00007ffc7232f968 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fa5406fd5ea
RDX: 0000000020000440 RSI: 0000000020000000 RDI: 00007ffc7232f970
RBP: 00007ffc7232f970 R08: 00007ffc7232f9b0 R09: 0000000000000432
R10: 0000000000804a03 R11: 0000000000000202 R12: 0000000000000004
R13: 0000555556a7a2c0 R14: 00007ffc7232f9b0 R15: 0000000000000000
</TASK>
==================================================================
The problem is that the inode contains an xattr entry with ea_inum of 15
when cleaning up an orphan inode <15>. When evict inode <15>, the reference
counting of the corresponding EA inode is decreased. When EA inode <15> is
found by find_inode_fast() in __ext4_iget(), it is found that the EA inode
holds the I_FREEING flag and waits for the EA inode to complete deletion.
As a result, when inode <15> is being deleted, we wait for inode <15> to
complete the deletion, resulting in an infinite loop and triggering Hung
Task. To solve this problem, we only need to check whether the ino of EA
inode and parent is the same before getting EA inode. |
| In the Linux kernel, the following vulnerability has been resolved:
dm crypt: add cond_resched() to dmcrypt_write()
The loop in dmcrypt_write may be running for unbounded amount of time,
thus we need cond_resched() in it.
This commit fixes the following warning:
[ 3391.153255][ C12] watchdog: BUG: soft lockup - CPU#12 stuck for 23s! [dmcrypt_write/2:2897]
...
[ 3391.387210][ C12] Call trace:
[ 3391.390338][ C12] blk_attempt_bio_merge.part.6+0x38/0x158
[ 3391.395970][ C12] blk_attempt_plug_merge+0xc0/0x1b0
[ 3391.401085][ C12] blk_mq_submit_bio+0x398/0x550
[ 3391.405856][ C12] submit_bio_noacct+0x308/0x380
[ 3391.410630][ C12] dmcrypt_write+0x1e4/0x208 [dm_crypt]
[ 3391.416005][ C12] kthread+0x130/0x138
[ 3391.419911][ C12] ret_from_fork+0x10/0x18 |
| ImageMagick before 7.1.2-35 and 6.9.13-60 contains an infinite loop vulnerability in the SVG decoder because QueueAuthenticPixelCacheNexus in MagickCore/cache.c fails to validate requested region width and height. Attackers can supply a crafted SVG image that repeatedly requests a non-advancing pixel region, consuming CPU and hanging the decoding worker. |
