| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A web page that contains unusual GPU shader code is loaded into the GPU compiler process and can lead memory allocation failure. If the allocation failure is not properly handled, the compiler may dereference a NULL pointer at a controlled offset, resulting in a crash of the compiler process. On certain platforms, when the compiler process has system privileges this could lead to crashes or enable further exploits on the device.
The weakness results from performing arithmetic operations on values derived from the shader program without properly preventing integer overflow. The overflow can cause incorrect memory size calculations, leading to memory allocation failures and subsequent invalid program behaviour. Integer overflow can produce unexpected values that affect memory allocation and other security-relevant operations. |
| HTTP::Body versions before 1.23_01 for Perl lose track of chunk boundaries in chunked request bodies when a read ends inside a chunk.
In chunked mode, used when no content length is given, add() treats a chunk as complete once the buffer is as long as the chunk's declared size, but the buffer still holds the chunk-size line. When a read ends in the last bytes of a chunk, add() takes the chunk short and parses the leftover data as the next chunk-size line.
A remote attacker can make a chunked body never complete, hanging a server that reads until the body is done, and may make it complete early, leaving the remaining bytes to be read as the next request. |
| A flaw was found in sblim-sfcb. A local attacker with access to the system can exploit an unsafe deserialization vulnerability in the provider-manager's inter-process communication (IPC) message parsing. By sending a specially crafted message, the attacker can cause out-of-bounds memory access, leading to the termination of the provider-manager process and a denial of service. This could also potentially result in limited unintended information disclosure. |
| A heap out-of-bounds read vulnerability was found in gfs2-utils. The ea_num_ptrs field from on-disk extended attribute metadata is consumed without bounds validation, causing a heap buffer over-read that may disclose sensitive memory contents or cause a crash when processing crafted GFS2 filesystem images. |
| A stack-based out-of-bounds read vulnerability exists in the "s_vlog" function of stunnel, when handling oversized log messages via "vsnprintf". A remote attacker with network access to a stunnel service can send protocol inputs that trigger a log message longer than 1024 bytes, leading to an out-of-bounds stack read and a potential crash. In certain corner cases, the same vulnerability could be used to replace a series of trailing "\n" characters with "\0". |
| A flaw was found in SSSD. The sss_nss_protocol_parse_addr() function in the NSS responder does not validate the addrlen field against the remaining packet body size. A local attacker can exploit this via a crafted GETHOSTBYADDR request to the NSS responder socket, causing an out-of-bounds read and process crash, resulting in a denial of service. |
| A flaw was found in SSSD. The extract_authtok_v1() function in the PAM responder does not validate the auth_token_length field against the remaining buffer size before processing. A local attacker can exploit this via a crafted protocol v1 request to the PAM responder socket, causing an out-of-bounds read and process crash, resulting in a denial of service. |
| A flaw was found in GNU Emacs. This vulnerability, a memory corruption issue, occurs when Emacs processes specially crafted SVG (Scalable Vector Graphics) CSS (Cascading Style Sheets) data. A local user could exploit this by convincing a victim to open a malicious SVG file, which may lead to a denial of service (DoS) or potentially information disclosure. |
| A flaw was found in nano. A local user could exploit a format string vulnerability in the `statusline()` function. By creating a directory with a name containing `printf` specifiers, the application attempts to display this name, leading to a segmentation fault (SEGV). This results in a Denial of Service (DoS) for the `nano` application. |
| FreeSWITCH is an open-source software telecommunications platform. From 1.10.0 to 1.11.1, there is a stack-based buffer overflow in mod_sofia when processing SIP Contact display names for dialog-event notifications. A peer can establish a dialog containing an excessively long display name and subsequently subscribe to that entity’s dialog events, causing the stored value to overflow a fixed 512-byte stack buffer. Exploitation requires presence management to be enabled, directly or through shared appearance, and normally requires valid profile credentials unless subscription authentication is disabled. The overflow can terminate the FreeSWITCH process and all active calls. This vulnerability is fixed in version 1.11.2. |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, rtmp_rtmp2rtpH264() trusted the length prefix of each inbound H.264 NAL unit without checking it against the bytes remaining in the RTMP message. An oversized declared unit underflowed the unsigned remaining-byte counter and advanced the parser beyond its receive buffer, where the next length-prefix read could crash the process. The flaw affects deployments that build and load mod_rtmp and accept video call sessions, commonly on TCP port 1935; placing the call requires a directory login where auth-calls is true, while no credentials are required where auth-calls is absent or false. A remote client can terminate FreeSWITCH and every active call, but the defect supplies no write primitive and memory disclosure has not been demonstrated. This issue is fixed in version 1.11.2. |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, mod_event_socket used an unauthenticated Content-Length value directly as the allocation size for an Event Socket message body. Negative or extremely large values could overflow the terminator calculation or force an allocation failure through a helper that aborts the FreeSWITCH process. The header is parsed before the Event Socket password, so any host admitted by apply-inbound-acl can trigger termination with its first packet; the default loopback ACL limits ordinary installations to local clients. The outbound socket dialplan path is also affected when FreeSWITCH connects to a hostile application server, and process termination drops every active call until the service is restarted. This issue is fixed in version 1.11.2. |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, rtmp_i_connect() passed the first RTMP connect argument to amf0_object_get() without checking whether the AMF value was an object. A string or number in place of an AMF object caused union bytes from the message to be interpreted as node pointers and dereferenced. Any client with network access to an enabled mod_rtmp listener could send the malformed connect command before login; the module is disabled in the stock build and configuration. The invalid read reliably crashes FreeSWITCH and ends every active call, while no write, memory disclosure, or code execution has been demonstrated. This issue is fixed in version 1.11.2. |
| A Kafka broker that authenticates clients with SASL/OAUTHBEARER using the bundled JWKS-backed validator always verifies the JWT signature, but two further checks are only performed when explicitly configured:
- The issuer (iss) claim is verified only when sasl.oauthbearer.expected.issuer is set. When it is unset, a validly-signed token carrying the expected audience is accepted regardless of which issuer minted it.
- An audience (aud) claim is required only when sasl.oauthbearer.expected.audience is set. When it is unset, a validly-signed token that omits the aud claim is accepted. (A token that carries an aud claim is
still rejected when no expected audience is configured.)
Both options default to unset and have been documented as optional (Importance LOW) since KIP-768 (3.1.0).
Impact:
The exposure is realizable mainly in deployments whose JWKS endpoint serves signing keys for more than one issuer (a multi-tenant identity provider, an aggregated/shared JWKS, or shared signing keys): a token
minted for a different issuer, or a token lacking an audience, may be accepted to authenticate — potentially as a higher-privileged principal. In a single-issuer deployment where the provider controls the iss
claim and issues audience-scoped tokens, exposure is limited. The signature trust anchor remains enforced in all cases. This is distinct from CVE-2026-33557 (acceptance of unsigned/unvalidated tokens); here the
signature is validated and only the issuer/audience checks are not enforced by default.
Mitigation (all affected versions, no upgrade required):
Set both sasl.oauthbearer.expected.issuer (to your provider's exact iss value) and sasl.oauthbearer.expected.audience (to the audience(s) your brokers expect), per listener. Brokers that set these perform
exact-match issuer/audience checks and are not affected. Both have been available since 3.1.0.
Resolution:
- From Apache Kafka 4.4.0: a broker configured with a JWKS endpoint fails to start unless both sasl.oauthbearer.expected.issuer and sasl.oauthbearer.expected.audience are set (secure by default). Deployments that
intentionally do not restrict the issuer and/or audience may opt out per axis with sasl.oauthbearer.allow.unverified.issuer=true and/or sasl.oauthbearer.allow.unverified.audience=true. |
| HTTP::Body versions before 1.23_01 for Perl drop mixed-case percent escapes from urlencoded form fields instead of decoding them.
The decode table holds only the all-lowercase and all-uppercase spelling of each hex pair, while the escape pattern matches either case. An escape such as %aB finds no entry and is replaced with nothing, joining the bytes on either side. Hex digits in percent escapes are case-insensitive, and conforming decoders return the byte.
A remote attacker can send a field name or value that a conforming decoder in front of the application reads differently, so that pass%aBword reaches the application as password. |
| HTTP::Body versions before 1.24_01 for Perl allow CPU exhaustion via regex backtracking on the filename of a multipart upload.
For every file part, the multipart parser finds the suffix of the uploaded filename by matching the default $basename_regexp, qr/[^.]+(\.[^\\\/]+)$/, against the whole basename. A basename made of many dots and ending in a backslash makes the regex backtrack in time quadratic in its length.
A remote attacker can exhaust CPU with one request, as a basename of about 32 KB takes several seconds to match and every file part is matched separately. |
| MIME::Field::ParamVal versions before 5.521 for Perl allow CPU exhaustion via unclosed comments in header parameters.
The comment pattern used to parse Content-Type and Content-Disposition parameters scans from each "(" to the next ")". In a field with no ")", every "(" scans to the end of the header and fails, so parsing takes time quadratic in the header length. The field is parsed again on each attribute lookup, several times per MIME entity.
A 40 KB header takes about 7 seconds to parse once. |
| Buffer overflow in PDFium in Google Chrome prior to 157.0.8103.38 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted PDF file. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
s390/mm: Add missing secure storage access fixups for donated memory
There are special cases where secure storage access exceptions happen
in a kernel context for pages that don't have the PG_arch_1 bit
set. That bit is set for non-exported guest secure storage (memory)
but is absent on storage donated to the Ultravisor since the kernel
isn't allowed to export donated pages.
Prior to this patch we would try to export the page by calling
arch_make_folio_accessible() which would instantly return since the
arch bit is absent signifying that the page was already exported and
no further action is necessary. This leads to secure storage access
exception loops which can never be resolved.
With this patch we unconditionally try to export and if that fails we
fixup. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Fix static_branch_dec() underflow for aql_disable.
syzbot reported static_branch_dec() underflow in aql_enable_write(). [0]
The problem is that aql_enable_write() does not serialise concurrent
write()s to the debugfs.
aql_enable_write() checks static_key_false(&aql_disable.key) and
later calls static_branch_inc() or static_branch_dec(), but the
state may change between the two calls.
aql_disable does not need to track inc/dec.
Let's use static_branch_enable() and static_branch_disable().
[0]:
val == 0
WARNING: kernel/jump_label.c:311 at __static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311, CPU#0: syz.1.3155/20288
Modules linked in:
CPU: 0 UID: 0 PID: 20288 Comm: syz.1.3155 Tainted: G U L syzkaller #0 PREEMPT(full)
Tainted: [U]=USER, [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026
RIP: 0010:__static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311
Code: f2 c9 ff 5b 5d c3 cc cc cc cc e8 54 f2 c9 ff 48 89 df e8 ac f9 ff ff eb ad e8 45 f2 c9 ff 90 0f 0b 90 eb a2 e8 3a f2 c9 ff 90 <0f> 0b 90 eb 97 48 89 df e8 5c 4b 33 00 e9 36 ff ff ff 0f 1f 80 00
RSP: 0018:ffffc9000b9f7c10 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffffffff9b3e5d40 RCX: ffffffff823c57b4
RDX: ffff8880285a0000 RSI: ffffffff823c5846 RDI: ffff8880285a0000
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000000a
R13: 1ffff9200173ef88 R14: 0000000000000001 R15: ffffc9000b9f7e98
FS: 00007f530dd726c0(0000) GS:ffff8881245e3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000001140 CR3: 000000007cc4a000 CR4: 00000000003526f0
Call Trace:
<TASK>
__static_key_slow_dec_cpuslocked kernel/jump_label.c:297 [inline]
__static_key_slow_dec kernel/jump_label.c:321 [inline]
static_key_slow_dec+0x7c/0xc0 kernel/jump_label.c:336
aql_enable_write+0x2b2/0x310 net/mac80211/debugfs.c:343
short_proxy_write+0x133/0x1a0 fs/debugfs/file.c:383
vfs_write+0x2aa/0x1070 fs/read_write.c:684
ksys_pwrite64 fs/read_write.c:793 [inline]
__do_sys_pwrite64 fs/read_write.c:801 [inline]
__se_sys_pwrite64 fs/read_write.c:798 [inline]
__x64_sys_pwrite64+0x1eb/0x250 fs/read_write.c:798
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xc9/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f530cf9aeb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f530dd72028 EFLAGS: 00000246 ORIG_RAX: 0000000000000012
RAX: ffffffffffffffda RBX: 00007f530d215fa0 RCX: 00007f530cf9aeb9
RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000010
RBP: 00007f530d008c1f R08: 0000000000000000 R09: 0000000000000000
R10: 4200000000000005 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f530d216038 R14: 00007f530d215fa0 R15: 00007ffde89fb978
</TASK> |
