| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock
Patch series "mm/damon/sysfs-schemes: fix use-after-free for [memcg_]path".
Reads of 'memcg_path' and 'path' files in DAMON sysfs interface could race
with their writes, results in use-after-free. Fix those.
This patch (of 2):
damon_sysfs_scheme_filter->mmecg_path can be read and written by users,
via DAMON sysfs memcg_path file. It can also be indirectly read, for the
parameters {on,off}line committing to DAMON. The reads for parameters
committing are protected by damon_sysfs_lock to avoid the sysfs files
being destroyed while any of the parameters are being read. But the
user-driven direct reads and writes are not protected by any lock, while
the write is deallocating the memcg_path-pointing buffer. As a result,
the readers could read the already freed buffer (user-after-free). Note
that the user-reads don't race when the same open file is used by the
writer, due to kernfs's open file locking. Nonetheless, doing the reads
and writes with separate open files would be common. Fix it by protecting
both the user-direct reads and writes with damon_sysfs_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix bounds check in check_xattrs() to prevent out-of-bounds access
The bounds check for the next xattr entry in check_xattrs() uses
(void *)next >= end, which allows next to point within sizeof(u32)
bytes of end. On the next loop iteration, IS_LAST_ENTRY() reads 4
bytes via *(__u32 *)(entry), which can overrun the valid xattr region.
For example, if next lands at end - 1, the check passes since
next < end, but IS_LAST_ENTRY() reads 4 bytes starting at end - 1,
accessing 3 bytes beyond the valid region.
Fix this by changing the check to (void *)next + sizeof(u32) > end,
ensuring there is always enough space for the IS_LAST_ENTRY() read
on the subsequent iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana_ib: Disable RX steering on RSS QP destroy
When an RSS QP is destroyed (e.g. DPDK exit), mana_ib_destroy_qp_rss()
destroys the RX WQ objects but does not disable vPort RX steering in
firmware. This leaves stale steering configuration that still points to
the destroyed RX objects.
If traffic continues to arrive (e.g. peer VM is still transmitting) and
the VF interface is subsequently brought up (mana_open), the firmware
may deliver completions using stale CQ IDs from the old RX objects.
These CQ IDs can be reused by the ethernet driver for new TX CQs,
causing RX completions to land on TX CQs:
WARNING: mana_poll_tx_cq+0x1b8/0x220 [mana] (is_sq == false)
WARNING: mana_gd_process_eq_events+0x209/0x290 (cq_table lookup fails)
Fix this by disabling vPort RX steering before destroying RX WQ objects.
Note that mana_fence_rqs() cannot be used here because the fence
completion is delivered on the CQ, which is polled by user-mode (e.g.
DPDK) and not visible to the kernel driver.
Refactor the disable logic into a shared mana_disable_vport_rx() in
mana_en, exported for use by mana_ib, replacing the duplicate code.
The ethernet driver's mana_dealloc_queues() is also updated to call
this common function. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup()
The mwifiex_adapter_cleanup() function uses timer_delete()
(non-synchronous) for the wakeup_timer before the adapter structure is
freed. This is incorrect because timer_delete() does not wait for any
running timer callback to complete.
If the wakeup_timer callback (wakeup_timer_fn) is executing when
mwifiex_adapter_cleanup() is called, the callback will continue to
access adapter fields (adapter->hw_status, adapter->if_ops.card_reset,
etc.) which may be freed by mwifiex_free_adapter() called later in the
mwifiex_remove_card() path.
Use timer_delete_sync() instead to ensure any running timer callback has
completed before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: nx - fix bounce buffer leaks in nx842_crypto_{alloc,free}_ctx
The bounce buffers are allocated with __get_free_pages() using
BOUNCE_BUFFER_ORDER (order 2 = 4 pages), but both the allocation error
path and nx842_crypto_free_ctx() release the buffers with free_page().
Use free_pages() with the matching order instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Fix use-after-free in driver remove()
In the remove callback, if a packet arrives after destroy_workqueue() is
called, but before sock_release(), the qrtr_ns_data_ready() callback will
try to queue the work, causing use-after-free issue.
Fix this issue by saving the default 'sk_data_ready' callback during
qrtr_ns_init() and use it to replace the qrtr_ns_data_ready() callback at
the start of remove(). This ensures that even if a packet arrives after
destroy_workqueue(), the work struct will not be dereferenced.
Note that it is also required to ensure that the RX threads are completed
before destroying the workqueue, because the threads could be using the
qrtr_ns_data_ready() callback. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: skip reading rdevs that are not in_sync
When reading bitmap pages from member disks, the code iterates through
all rdevs and attempts to read from the first available one. However,
it only checks for raid_disk assignment and Faulty flag, missing the
In_sync flag check.
This can cause bitmap data to be read from spare disks that are still
being rebuilt and don't have valid bitmap information yet. Reading
stale or uninitialized bitmap data from such disks can lead to
incorrect dirty bit tracking, potentially causing data corruption
during recovery or normal operation.
Add the In_sync flag check to ensure bitmap pages are only read from
fully synchronized member disks that have valid bitmap data. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: authencesn - reject short ahash digests during instance creation
authencesn requires either a zero authsize or an authsize of at least
4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of
high-order sequence number data at the end of the authenticated data.
While crypto_authenc_esn_setauthsize() already rejects explicit
non-zero authsizes in the range 1..3, crypto_authenc_esn_create()
still copied auth->digestsize into inst->alg.maxauthsize without
validating it. The AEAD core then initialized the tfm's default
authsize from that value.
As a result, selecting an ahash with digest size 1..3, such as
cbcmac(cipher_null), exposed authencesn instances whose default
authsize was invalid even though setauthsize() would have rejected the
same value. AF_ALG could then trigger the ESN tail handling with a
too-short tag and hit an out-of-bounds access.
Reject authencesn instances whose ahash digest size is in the invalid
non-zero range 1..3 so that no tfm can inherit an unsupported default
authsize. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: Handle probe errors properly
The probe procedure of setup_card() in caiaq driver doesn't treat the
error cases gracefully, e.g. the error from snd_card_register() calls
snd_card_free() but continues. This would lead to a UAF for the
further calls like snd_usb_caiaq_control_init(), as Berk suggested in
another patch in the link below.
However, the problem is not only that; in general, this function drops
the all error handlings (as it's a void function) although its caller
can propagate an error to snd_probe(), which eventually calls
snd_card_free() as a proper error path. That said, we should treat
each error case in setup_card(), and just return the error code
promptly, which is then handled later as a fatal error in snd_probe().
This patch achieves it by changing the setup_card() to return an error
code. Also, the superfluous snd_card_free() call is removed, too.
Note that card->private_free can be set still safely at returning an
error. All called functions in card_free() have checks of the
unassigned resources or NULL checks. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix potential UAF after skb_unshare() failure
If skb_unshare() fails to unshare a packet due to allocation failure in
rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread())
will be NULL'd out. This will likely cause the call to
trace_rxrpc_rx_done() to oops.
Fix this by moving the unsharing down to where rxrpc_input_call_event()
calls rxrpc_input_call_packet(). There are a number of places prior to
that where we ignore DATA packets for a variety of reasons (such as the
call already being complete) for which an unshare is then avoided.
And with that, rxrpc_input_packet() doesn't need to take a pointer to the
pointer to the packet, so change that to just a pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: imx: fix use-after-free on unbind
The SPI subsystem frees the controller and any subsystem allocated
driver data as part of deregistration (unless the allocation is device
managed).
Take another reference before deregistering the controller so that the
driver data is not freed until the driver is done with it. |
| Flowise through 3.1.4 contains a sandbox escape vulnerability that allows authenticated users to execute OS commands by abusing allowlisted langchain and mammoth modules when ALLOW_BUILTIN_DEP=true. Attackers can submit JavaScript to /api/v1/node-custom-function that writes a file into the mammoth package via LocalFileStore and requires it, escaping vm2 as the Flowise process user. |
| A vulnerability was found in 37954679 cak-filemanagement-system up to 5e6433246475e66462e1fea980688de96a049297. This affects the function mysqli_query of the file admin/save_student.php. Performing a manipulation of the argument date/department/subject/forwarded_to/action_taken_by/section/password results in sql injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Zuke is a code-first, strongly typed build automation system for Deno. Prior to 1.10.0, the @zuke/gh githubWorkflow(...) gate correlates a dispatched workflow run using only a display-title marker that is visible in the workflow run list and can be copied by another dispatcher. In configurations where the external workflow repository grants workflow_dispatch permission to a party not equally trusted by the releasing repository, an attacker can dispatch a run with the marker and cause the gate to adopt its conclusion without verifying the event, ref, or creation window. A passing substituted run can authorize an unvalidated release, while a failed or cancelled run can block a valid release, and the persisted adopted run ID preserves the substitution across build resume. This issue is fixed in version 1.10.0. |
| In server mode pgAdmin 4 resolves a server's password file, SSL certificate, key, CRL and SSH tunnel identity file relative to the user's storage directory, but get_complete_file_path() only stripped leading slashes before joining the two. A path such as "../<another user>/.pgpass", set through the server dialog, the REST API or a servers.json import, therefore named another user's file, and connecting used that user's saved passwords, client certificate or SSH key. The sslkeylogfile connection parameter was passed to libpq unchanged, so a path outside storage let libpq create or append a file as the account running pgAdmin.
make_conninfo() also quoted connection parameter values but not their names, so a crafted parameter name could smuggle additional keyword=value pairs past these checks.
The fix requires the resolved path, with symbolic links followed, to stay inside the user's storage directory or the named shared storage directory, confines sslkeylogfile the same way, and accepts only exact libpq keywords as connection parameter names. A refused path or keyword is reported instead of letting libpq fall back to a default.
This issue affects pgAdmin 4: before 9.19. |
| When a server in pgAdmin 4 had no password file, client certificate or client key configured, or the configured one could not be found, pgAdmin left the parameter out of the connection and libpq fell back to the defaults of the operating-system account running pgAdmin: ~/.pgpass, ~/.postgresql/postgresql.crt and postgresql.key, or PGPASSFILE, PGSSLCERT and PGSSLKEY. In server mode any user could therefore connect to a server with the service account's saved passwords or client certificate, and supplying only a copy of its public certificate was enough for libpq to pair it with the service account's private key. A pg_service.conf entry, or a maintenance database name read as a connection string by pg_dumpall, could bring the same files back for the utilities.
The fix gives each of these parameters a value in server mode, the user's own file or otherwise a path that can never be opened, in the connection string, in the environment of the utilities and in the --dbname connection string that ranks above a service entry. Desktop mode is unchanged.
This issue affects pgAdmin 4: before 9.19. |
| libpq looks a connection service up in the service file of the operating-system account running pgAdmin 4, and an entry there can hold a password or name a password file or client certificate. In server mode any user could set a server's Service, or a "service" connection parameter, to one of those entries and connect with its credentials. A PGPASSWORD or PGSERVICE variable set for that account was likewise used by libpq for every connection without a value of its own and passed on to the utilities, and pg_dumpall read a maintenance database name such as "service=..." as a connection string.
The fix adds the SERVER_MODE_ALLOWED_SERVICES setting, empty by default: in server mode only a listed service can be used, the servicefile parameter is refused, and PGPASSWORD and PGSERVICE are removed from pgAdmin's environment at startup. The allowlist is checked again on the final connection string, and the pg_dumpall database name is wrapped as a connection string.
This issue affects pgAdmin 4: before 9.19. |
| When a pgAdmin 4 connection was not meant to use a Kerberos user's delegated credentials, pgAdmin removed KRB5CCNAME from its environment, so the Kerberos library fell back to the default credential cache, or a client keytab, of the operating-system account running pgAdmin. libpq then answered any server that asked for GSSAPI authentication with that account's ticket, whatever user name the pgAdmin user gave, so in server mode any user could connect as the service account's Kerberos principal; gssencmode=disable did not prevent it. On Windows, SSPI used the service account's logon in the same way. psql was also started with pgAdmin's environment, which could hold another user's credential cache while that user was connecting.
The fix points KRB5CCNAME and KRB5_CLIENT_KTNAME at a file that cannot exist except while a Kerberos-authenticated user connects with Kerberos, and gives every other connection, psql and the utilities require_auth=!gss,!sspi and gssencmode=disable, checked on the final connection string. require_auth needs libpq 16 or later.
This issue affects pgAdmin 4: before 9.19. |
| pgAdmin 4 runs pg_dump, pg_restore, pg_dumpall and psql from the binary path a user sets in their preferences. In server mode the binary path was refused only when it lay under the per-user storage directory (STORAGE_DIR), not under a SHARED_STORAGE directory, which ordinary users can upload files to. A user could therefore upload an executable to shared storage, point their binary path at it, and have pgAdmin run it as the operating-system account running pgAdmin. On POSIX, files created through pgAdmin are not executable, so this is exploitable where any file with an executable name can run, such as Windows server mode.
The fix checks the binary path against every SHARED_STORAGE directory as well, after expanding $DIR, collapsing ".." and resolving symbolic links, compares directories in a way a different spelling on a case-insensitive filesystem cannot bypass, refuses a path containing a NUL, and enforces the check wherever binary paths are resolved, including for the PSQL tool.
This issue affects pgAdmin 4: before 9.19. |
| pgAdmin 4 opens SSH tunnels with the sshtunnel library but gave it neither host_pkey_directories nor ssh_config_file, so it always loaded the unencrypted private keys in ~/.ssh of the operating-system account running pgAdmin, read that account's ~/.ssh/config (IdentityFile, User, HostName, ProxyCommand) for the tunnel host, and could use its ssh-agent. In server mode any user could therefore configure a tunnel to a host that accepts the service account's key, with no credentials of their own or with an identity file that did not exist in their storage, and reach it as that account.
The fix makes tunnels in server mode use only the identity file or password the user configured: the service account's keys, configuration and agent are no longer used, and an identity file that cannot be found in the user's storage is reported instead of falling back to ~/.ssh. Desktop mode is unchanged.
This issue affects pgAdmin 4: before 9.19. |
