Export limit exceeded: 421043 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (396 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63859 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Add missing bits in airoha_qdma_cleanup_tx_queue() Similar to airoha_qdma_cleanup_rx_queue(), reset DMA TX descriptors in airoha_qdma_cleanup_tx_queue routine. Moreover, reset TX_DMA_IDX to TX_CPU_IDX to notify the NIC the QDMA TX ring is empty. | ||||
| CVE-2026-72714 | 1 Rocq-prover | 1 Rocq | 2026-10-26 | 6.3 Medium |
| Rocq Prover does not restore the universe graph's copy of the universe checking flag when a module that locally disabled the check is closed. Local Unset Universe Checking inside a module is expected to last only until the module ends, and the global flag is restored, but the universe graph keeps its own copy which is left disabled. The two views then disagree: Test Universe Checking reports the check as enabled while the kernel continues to accept universe-inconsistent terms. With the constraint between two universes no longer enforced, Hurkens' paradox applies and yields a proof of False, from which any proposition follows. The proof uses no axioms, plugins or unsafe features once the module has closed, and Print Assumptions reports it as closed under the global context, so neither the assumption audit nor the flag query reflects the actual kernel state. No fix is available. | ||||
| CVE-2026-98471 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Do cache maintenance on the source VM during intra-host migration Manually perform cache maintenance on the source VM during intra-host migration to ensure no stale data is left in CPU caches after the VM is destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's memory reclaim flows won't trigger cache maintenance, e.g. when all guest memory is reclaimed in response to detaching from the mmu_notifier. Note, relying on the destination VM to do cache maintenance isn't an option as KVM doesn't require identical guest memory configurations, i.e. the source VM may have access to memory that the destination VM does not. Enforcing equivalent memory configurations is infeasible, as it would require a *deep* comparison of memslots, e.g. to verify that not only are the memslot identical, but what the memslots point at is also identical. | ||||
| CVE-2026-115478 | 1 The-40-thieves | 1 Obsidian-tc | 2026-10-23 | N/A |
| obsidian-tc is a governed, agent-ready Model Context Protocol server for Obsidian vaults. From 1.0.1 until 1.31.4, `create_entity`, `link_entities`, `rename_entity`, `unlink_entities` and `delete_entity` regenerate memory notes from SQLite at the computed `memory/<type>/<name>.md` path without reliably preserving note ownership or the consistency of a failed lifecycle operation. During shared materialization, a hand-authored note or an orphan left by a different entity whose name sanitized to the same path could have its entire body overwritten on the next write naming that type and name, with non-owned frontmatter preserved. `rename_entity` also seeded the destination path with a direct atomic write without validating ownership and could overwrite a foreign note there. Separately, several tools mutated SQLite before fallible filesystem work: `create_entity` and `link_entities` inserted the row or relation before materialization; `rename_entity` updated the entity, including a retired status, before updating its note; `unlink_entities` removed a relation before rematerializing the source note; and `delete_entity`'s cascade removed the target and its relations before rematerializing neighbouring notes. A later filesystem failure could therefore leave a row or relation changed and the memory graph inconsistent with the notes on disk even when the operation failed. An authorized caller with the required memory-tool permissions could, without intending to, destroy the body of a vault note outside the entity being written; `delete_entity` additionally requires its deletion permission and destructive confirmation, which this memory flaw does not bypass. Snapshots-before-write through `restore_note` mitigate the overwrite only where snapshots are enabled and the note had previously been written through obsidian-tc. This issue is fixed in version 1.31.4. | ||||
| CVE-2026-17525 | 1 Abb | 1 My Control System | 2026-10-23 | 5.2 Medium |
| Incomplete cleanup vulnerability in ABB My Control System. This issue affects My Control System: 26.4 and 26.5. | ||||
| CVE-2026-113658 | 1 Apostrophecms | 1 Apostrophecms | 2026-10-23 | 7.5 High |
| ApostropheCMS is an open-source Node.js content management system. Prior to 4.33.0, the unauthenticated Rich Text CSV conversion route writes a multipart upload to the system temporary directory before checking its extension and does not remove the staged file when that validation rejects it. Repeated large rejected uploads, using the normal public CSRF cookie, can persistently consume temporary-disk capacity and may disrupt ApostropheCMS and other services that depend on the same partition. This issue is fixed in version 4.33.0. | ||||
| CVE-2026-98615 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Set AW_FLUSH_MODE alongside AW_FLUSH when flushing the mailbox When tearing down the FW mailbox Rx ring, fbnic_mbx_reset_desc_ring() writes AW_CFG with FLUSH set and everything else, BME included, cleared. Clearing BME halts the device's writes to the host but leaves the staged requests parked in the PUL write pipeline rather than draining them, so on the write path FLUSH alone never terminates the outstanding requests and the flush the firmware waits on never completes. Add the FLUSH_MODE definition and set both bits so the staged writes drain out of the pipeline on their own. BME stays cleared, so nothing lands on the host; it is restored later in fbnic_mbx_init_desc_ring() when the ring is rebuilt, once the outstanding writes are gone. The read path is unaffected. AR_CFG has no equivalent mode bit and AR_FLUSH terminates the outstanding reads by itself, so it is left as is. Both writes remain plain stores rather than read-modify-writes. That is deliberate: the matching write in fbnic_mbx_init_desc_ring() restores BME and the TLP attributes, and clears both flush bits as a side effect. | ||||
| CVE-2026-98691 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Tear down inactive DP tunnels when the domain is stopped tb_stop() only tears down DMA tunnels so a DP tunnel that is still waiting for dprx_work to complete keeps that work queued while the routers are removed and the control channel is stopped. The work only stops once the DPRX timeout has passed and because it requeues itself until then the flush_workqueue() in tb_domain_remove() won't wait for its final run. The callback then runs against a domain that is already torn down. A reference to that domain is kept so the completion waiting for that domain to disappear in unbind will block until the timeout is eventually reached. Tear down DP tunnels that are not active yet as well which also cancels that work. Tunnels for displays that are already alive are untouched and keep working. | ||||
| CVE-2026-110008 | 1 Fastify | 1 Fastify/oauth2 | 2026-10-21 | 4.2 Medium |
| @fastify/oauth2 is a Fastify wrapper for OAuth2 login flows. In versions 7.2.0 through 8.3.1, the state and code-verifier cookies are set without a Path attribute at a login route with two or more path segments, while the clearing step at the OAuth callback writes them with a root path, so the original cookies survive the callback and the documented single-use guarantee for the state value does not hold. A state value an attacker learns stays valid for the rest of the browser session, letting the attacker drive their own authorization flow in the victim's browser and sign the victim in to the attacker's account (login CSRF). The issue is fixed in @fastify/oauth2 8.3.2, and users should upgrade to 8.3.2 or later. As a workaround, set an explicit cookie path so the set and the clear name the same cookie. | ||||
| CVE-2026-97997 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtio_ring: fix stale descriptor flags after a failed packed add In a packed ring the AVAIL and USED bits sit in the descriptor itself, so writing them makes that descriptor available. Those bit combinations flip meaning on every round of the ring, tracked by a wrap counter, so invalidating or validating a descriptor means inverting both bits. Commit 1ce9e6055fa0 ("virtio_ring: introduce packed ring support") has virtqueue_add_packed() make every descriptor of a chain available as it maps the chain, and write the head last. The device consumes the ring in order and stops at a head that is not available yet, so it never reaches the rest. When vring_map_one_sg() fails partway, unmap_release unmaps the segments and restores avail_used_flags, but the descriptors it wrote to in the ring stay marked with AVAIL and USED bits. The head is now the only entry that keeps the device from consuming these stale entries. For example, the ring would look like this now. Z - pre-previous command A - previous command B - aborted command C - current command [A1 DONE] [A2 DONE] <C1 EMPTY> [B2] [B3] [Z1 DONE] When the driver now attempts to issue the C command, the next add starts at the same head as B. If C spans less descriptors than B, there is no end marker because AVAIL and USED bits were still in place. And that means the device will start interpreting these stale entries (B2/B3) as another command entry, which then blocks the queue. This effect typically happens in swiotlb configurations under memory pressure, because vring_map_one_sg() can then fail with larger I/O requests which then leads to command abortions. There are broadly 2 ways to avoid leaving those flags behind: 1) Defer those flags too until the chain is complete. 2) Rewrite those flags for the previous wrap counter. Implement the second option in both packed add paths. The first option traverses the chain a second time on every successful add. The second option invalidates all added descriptors when any add fails. With this patch applied, a packed virtqueue keeps completing requests after a failed add. | ||||
| CVE-2026-63998 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: module: call ethnl_ops_complete() on module flash errors When validate() fails we are skipping over ethnl_ops_complete() even tho we already called ethnl_ops_begin(). | ||||
| CVE-2024-57975 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: do proper folio cleanup when run_delalloc_nocow() failed [BUG] With CONFIG_DEBUG_VM set, test case generic/476 has some chance to crash with the following VM_BUG_ON_FOLIO(): BTRFS error (device dm-3): cow_file_range failed, start 1146880 end 1253375 len 106496 ret -28 BTRFS error (device dm-3): run_delalloc_nocow failed, start 1146880 end 1253375 len 106496 ret -28 page: refcount:4 mapcount:0 mapping:00000000592787cc index:0x12 pfn:0x10664 aops:btrfs_aops [btrfs] ino:101 dentry name(?):"f1774" flags: 0x2fffff80004028(uptodate|lru|private|node=0|zone=2|lastcpupid=0xfffff) page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio)) ------------[ cut here ]------------ kernel BUG at mm/page-writeback.c:2992! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 2 UID: 0 PID: 3943513 Comm: kworker/u24:15 Tainted: G OE 6.12.0-rc7-custom+ #87 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] pc : folio_clear_dirty_for_io+0x128/0x258 lr : folio_clear_dirty_for_io+0x128/0x258 Call trace: folio_clear_dirty_for_io+0x128/0x258 btrfs_folio_clamp_clear_dirty+0x80/0xd0 [btrfs] __process_folios_contig+0x154/0x268 [btrfs] extent_clear_unlock_delalloc+0x5c/0x80 [btrfs] run_delalloc_nocow+0x5f8/0x760 [btrfs] btrfs_run_delalloc_range+0xa8/0x220 [btrfs] writepage_delalloc+0x230/0x4c8 [btrfs] extent_writepage+0xb8/0x358 [btrfs] extent_write_cache_pages+0x21c/0x4e8 [btrfs] btrfs_writepages+0x94/0x150 [btrfs] do_writepages+0x74/0x190 filemap_fdatawrite_wbc+0x88/0xc8 start_delalloc_inodes+0x178/0x3a8 [btrfs] btrfs_start_delalloc_roots+0x174/0x280 [btrfs] shrink_delalloc+0x114/0x280 [btrfs] flush_space+0x250/0x2f8 [btrfs] btrfs_async_reclaim_data_space+0x180/0x228 [btrfs] process_one_work+0x164/0x408 worker_thread+0x25c/0x388 kthread+0x100/0x118 ret_from_fork+0x10/0x20 Code: 910a8021 a90363f7 a9046bf9 94012379 (d4210000) ---[ end trace 0000000000000000 ]--- [CAUSE] The first two lines of extra debug messages show the problem is caused by the error handling of run_delalloc_nocow(). E.g. we have the following dirtied range (4K blocksize 4K page size): 0 16K 32K |//////////////////////////////////////| | Pre-allocated | And the range [0, 16K) has a preallocated extent. - Enter run_delalloc_nocow() for range [0, 16K) Which found range [0, 16K) is preallocated, can do the proper NOCOW write. - Enter fallback_to_fow() for range [16K, 32K) Since the range [16K, 32K) is not backed by preallocated extent, we have to go COW. - cow_file_range() failed for range [16K, 32K) So cow_file_range() will do the clean up by clearing folio dirty, unlock the folios. Now the folios in range [16K, 32K) is unlocked. - Enter extent_clear_unlock_delalloc() from run_delalloc_nocow() Which is called with PAGE_START_WRITEBACK to start page writeback. But folios can only be marked writeback when it's properly locked, thus this triggered the VM_BUG_ON_FOLIO(). Furthermore there is another hidden but common bug that run_delalloc_nocow() is not clearing the folio dirty flags in its error handling path. This is the common bug shared between run_delalloc_nocow() and cow_file_range(). [FIX] - Clear folio dirty for range [@start, @cur_offset) Introduce a helper, cleanup_dirty_folios(), which will find and lock the folio in the range, clear the dirty flag and start/end the writeback, with the extra handling for the @locked_folio. - Introduce a helper to clear folio dirty, start and end writeback - Introduce a helper to record the last failed COW range end This is to trace which range we should skip, to avoid double unlocking. - Skip the failed COW range for the e ---truncated--- | ||||
| CVE-2026-110924 | 2 Openssh, Redhat | 4 Openssh, Enterprise Linux, Hardened Images and 1 more | 2026-10-21 | 4.8 Medium |
| CVE-2026-110924 has been marked as a duplicate of CVE-2026-106553. | ||||
| CVE-2026-113351 | 1 Libexpat Project | 1 Libexpat | 2026-10-20 | 5.9 Medium |
| libexpat 2.7.2 through 2.9.0 contains a denial of service vulnerability because XML_ParserReset zeroes the direct byte count but never offsets tracked heap allocations. Attackers can submit a large XML document so later documents on the same reset parser fail with XML_ERROR_NO_MEMORY until it is recreated. | ||||
| CVE-2026-98595 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: udp: remove a disconnected socket from the 4-tuple hash table A UDP socket bound to a specific address and port keeps its entry in the 4-tuple hash table after it is disconnected: sk binds to 127.0.0.1:21001 sk connects to 127.0.0.2:20001 // filed in the 4-tuple table sk disconnects, connect(AF_UNSPEC) // still filed, peer now 0.0.0.0:0 __udp_disconnect() takes a socket out of that table only as a side effect of ->rehash() or ->unhash(), and it skips ->rehash() when SOCK_BINDADDR_LOCK is set and ->unhash() when SOCK_BINDPORT_LOCK is set. commit 6996a2d2d0a6 ("udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.") fixed the same end state for a wildcard-bound socket, by a path this one does not take. The entry is counted whether or not anything hits it. hash4_cnt on the hash2 slot stays raised for as long as the socket lives, so udp_has_hash4() keeps sending every packet for that address and port through the 4-tuple lookup first. On IPv6 it can also be hit. __udp_disconnect() does not clear sk_v6_daddr, so udp_v6_rehash() files the entry under the peer the socket was connected to with a zero dport, and inet6_match() compares that same field: a datagram from the former peer with a zero source port matches, and source port zero is accepted on receive. On IPv4 the peer is cleared, so a match would need a zero source address as well, which the routing layer rejects as martian. The stale sk_v6_daddr is a separate defect, not addressed here; removing the entry closes this path either way. The entry can also be relocated. __udp_disconnect() clears sk_bound_dev_if, so a subsequent SO_BINDTODEVICE calls ->rehash(), and because the receive address is still specific udp_lib_rehash() moves the entry instead of removing it, into the bucket that (rcv_saddr, num, 0, 0) hashes to -- a pure function of the address and port, so every socket reaching this state on one address and port collects in one bucket. The bucket cannot be chosen from outside, as udp_ehashfn() is seeded with a per-boot secret. This last one became reachable only with commit 644f9108f3a5 ("udp: Make rehash4 independent in udp_lib_rehash()"), which moved the hash4 handling out of a branch a disconnected socket does not take; the stale entry itself dates from the commit in Fixes. Take the socket out of the table before __udp_disconnect() runs, while it still matches how it was filed. This also reaches the wildcard case ahead of udp_lib_rehash()'s udp_unhash4() branch, leaving that branch unreachable from udp_disconnect(); removing it belongs in net-next. udp_disconnect() and udp_abort() are the only UDP entries into __udp_disconnect(), which is shared with raw, ping and l2tp sockets that are not struct udp_sock: ping_prot.obj_size is sizeof(struct inet_sock), so udp_hashed4() on one would read past the allocation. | ||||
| CVE-2026-68091 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: stop hardware after post-start probe failures wacom_parse_and_register() starts HID hardware before registering inputs and initializing pad LEDs/remotes. Those later steps can fail, but their error paths currently release Wacom resources without stopping the HID hardware. Route post-hid_hw_start() failures through hid_hw_stop() before releasing driver resources. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-109869 | 2 Nodejs, Undici | 2 Undici, Undici | 2026-10-19 | 7.5 High |
| undici is an HTTP client library for Node.js. In versions 6.23.0 through 6.29.0, 7.18.0 through 7.30.0, and 8.0.0 through 8.12.1, its fetch() implementation crashes the Node.js process when a malicious server returns a response with more than five content codings and closes the connection before sending the body. undici rejects such responses because of a content-encoding limit, but it created the internal response stream before that check and returned without attaching an error listener or aborting the request, so the early close surfaces a content-length mismatch on the orphaned stream, which Node.js treats as an unhandled error and terminates the process. A remote, unauthenticated server can trigger this with a single response, even when the application correctly catches the fetch() rejection, resulting in a denial of service. The issue is fixed in undici 6.29.1, 7.30.1, and 8.12.2, and users should upgrade to one of those versions or later. There is no workaround. | ||||
| CVE-2026-31668 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: seg6: separate dst_cache for input and output paths in seg6 lwtunnel The seg6 lwtunnel uses a single dst_cache per encap route, shared between seg6_input_core() and seg6_output_core(). These two paths can perform the post-encap SID lookup in different routing contexts (e.g., ip rules matching on the ingress interface, or VRF table separation). Whichever path runs first populates the cache, and the other reuses it blindly, bypassing its own lookup. Fix this by splitting the cache into cache_input and cache_output, so each path maintains its own cached dst independently. | ||||
| CVE-2026-23445 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: igc: fix page fault in XDP TX timestamps handling If an XDP application that requested TX timestamping is shutting down while the link of the interface in use is still up the following kernel splat is reported: [ 883.803618] [ T1554] BUG: unable to handle page fault for address: ffffcfb6200fd008 ... [ 883.803650] [ T1554] Call Trace: [ 883.803652] [ T1554] <TASK> [ 883.803654] [ T1554] igc_ptp_tx_tstamp_event+0xdf/0x160 [igc] [ 883.803660] [ T1554] igc_tsync_interrupt+0x2d5/0x300 [igc] ... During shutdown of the TX ring the xsk_meta pointers are left behind, so that the IRQ handler is trying to touch them. This issue is now being fixed by cleaning up the stale xsk meta data on TX shutdown. TX timestamps on other queues remain unaffected. | ||||
| CVE-2026-112180 | 1 Misp | 1 Misp | 2026-10-19 | N/A |
| MISP contains a data integrity flaw in its event deletion logic. When a user deletes an event, several associated records are not removed from the database, leaving them as orphaned entries. The affected record types include event report tags, event graph entries, proposal (shadow attribute) correlations, fuzzy ssdeep correlation chunks, and attachment scan results. These orphaned records may contain sensitive threat intelligence data such as correlation mappings, scan results, and report metadata that should have been removed along with the parent event. Their persistence beyond the intended deletion lifecycle creates a risk of unintended data retention and potential information exposure if the records are reachable through other application queries or administrative interfaces. Preconditions: - An authenticated user with sufficient privileges to delete events in MISP. - The event must have associated reports, graphs, correlations, ssdeep chunks, or attachment scan results. Impact: - Residual sensitive data persists in the database after the parent event is deleted. - Accumulation of orphaned records over time may contribute to storage bloat. - Orphaned records may be inadvertently exposed through other data-access paths that do not validate the existence of the parent event. Affected versions: <2.5.48 | ||||