| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Use pci_name() for debugfs directory naming
Use pci_name(pdev) for the per-device debugfs directory instead of
hardcoded "0" for PFs and pci_slot_name(pdev->slot) for VFs. The
previous approach had two issues:
1. pci_slot_name() dereferences pdev->slot, which can be NULL for VFs
in environments like generic VFIO passthrough or nested KVM,
causing a NULL pointer dereference.
2. Multiple PFs would all use "0", and VFs across different PCI
domains or buses could share the same slot name, leading to
-EEXIST errors from debugfs_create_dir().
pci_name(pdev) returns the unique BDF address, is always valid, and is
unique across the system. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: prevent NULL pointer dereference in mt7925_tx_check_aggr()
Move the NULL check for 'sta' before dereferencing it to prevent a
possible crash. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/ras: Fix NULL deref in ras_core_ras_interrupt_detected()
Fixes a NULL pointer dereference when ras_core is NULL and ras_core->dev
is accessed in the error path.
Reported by: Dan Carpenter <dan.carpenter@linaro.org> |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/ras: Fix NULL deref in ras_core_get_utc_second_timestamp()
ras_core_get_utc_second_timestamp() retrieves the current UTC timestamp
(in seconds since the Unix epoch) through a platform-specific RAS system
callback and is used for timestamping RAS error events.
The function checks ras_core in the conditional statement before calling
the sys_fn callback. However, when the condition fails, the function
prints an error message using ras_core->dev.
If ras_core is NULL, this can lead to a potential NULL pointer
dereference when accessing ras_core->dev.
Add an early NULL check for ras_core at the beginning of the function
and return 0 when the pointer is not valid. This prevents the
dereference and makes the control flow clearer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Avoid NULL dereference in dc_dmub_srv error paths
In dc_dmub_srv_log_diagnostic_data() and
dc_dmub_srv_enable_dpia_trace().
Both functions check:
if (!dc_dmub_srv || !dc_dmub_srv->dmub)
and then call DC_LOG_ERROR() inside that block.
DC_LOG_ERROR() uses dc_dmub_srv->ctx internally. So if
dc_dmub_srv is NULL, the logging itself can dereference a
NULL pointer and cause a crash.
Fix this by splitting the checks.
First check if dc_dmub_srv is NULL and return immediately.
Then check dc_dmub_srv->dmub and log the error only when
dc_dmub_srv is valid.
Fixes the below:
../display/dc/dc_dmub_srv.c:962 dc_dmub_srv_log_diagnostic_data() error: we previously assumed 'dc_dmub_srv' could be null (see line 961)
../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_enable_dpia_trace() error: we previously assumed 'dc_dmub_srv' could be null (see line 1166) |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Guard mana_remove against double invocation
If PM resume fails (e.g., mana_attach() returns an error), mana_probe()
calls mana_remove(), which tears down the device and sets
gd->gdma_context = NULL and gd->driver_data = NULL.
However, a failed resume callback does not automatically unbind the
driver. When the device is eventually unbound, mana_remove() is invoked
a second time. Without a NULL check, it dereferences gc->dev with
gc == NULL, causing a kernel panic.
Add an early return if gdma_context or driver_data is NULL so the second
invocation is harmless. Move the dev = gc->dev assignment after the
guard so it cannot dereference NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/conexant: Fix missing error check for jack detection
In cx_probe(), the return value of snd_hda_jack_detect_enable_callback()
is ignored. This function returns a pointer, and if it fails (e.g., due
to memory allocation failure), it returns an error pointer which must
be checked using IS_ERR().
If the registration fails, the driver continues to probe, but the jack
detection callback will not be registered. This can lead to a kernel
crash later when the driver attempts to handle jack events or accesses
the uninitialized structure.
Check the return value using IS_ERR() and propagate the error via
PTR_ERR() to the probe caller. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix NULL pointer dereference in ice_reset_all_vfs()
ice_reset_all_vfs() ignores the return value of ice_vf_rebuild_vsi().
When the VSI rebuild fails (e.g. during NVM firmware update via
nvmupdate64e), ice_vsi_rebuild() tears down the VSI on its error path,
leaving txq_map and rxq_map as NULL. The subsequent unconditional call
to ice_vf_post_vsi_rebuild() leads to a NULL pointer dereference in
ice_ena_vf_q_mappings() when it accesses vsi->txq_map[0].
The single-VF reset path in ice_reset_vf() already handles this
correctly by checking the return value of ice_vf_reconfig_vsi() and
skipping ice_vf_post_vsi_rebuild() on failure.
Apply the same pattern to ice_reset_all_vfs(): check the return value
of ice_vf_rebuild_vsi() and skip ice_vf_post_vsi_rebuild() and
ice_eswitch_attach_vf() on failure. The VF is left safely disabled
(ICE_VF_STATE_INIT not set, VFGEN_RSTAT not set to VFACTIVE) and can
be recovered via a VFLR triggered by a PCI reset of the VF
(sysfs reset or driver rebind).
Note that this patch does not prevent the VF VSI rebuild from failing
during NVM update — the underlying cause is firmware being in a
transitional state while the EMP reset is processed, which can cause
Admin Queue commands (ice_add_vsi, ice_cfg_vsi_lan) to fail. This
patch only prevents the subsequent NULL pointer dereference that
crashes the kernel when the rebuild does fail.
crash> bt
PID: 50795 TASK: ff34c9ee708dc680 CPU: 1 COMMAND: "kworker/u512:5"
#0 [ff72159bcfe5bb50] machine_kexec at ffffffffaa8850ee
#1 [ff72159bcfe5bba8] __crash_kexec at ffffffffaaa15fba
#2 [ff72159bcfe5bc68] crash_kexec at ffffffffaaa16540
#3 [ff72159bcfe5bc70] oops_end at ffffffffaa837eda
#4 [ff72159bcfe5bc90] page_fault_oops at ffffffffaa893997
#5 [ff72159bcfe5bce8] exc_page_fault at ffffffffab528595
#6 [ff72159bcfe5bd10] asm_exc_page_fault at ffffffffab600bb2
[exception RIP: ice_ena_vf_q_mappings+0x79]
RIP: ffffffffc0a85b29 RSP: ff72159bcfe5bdc8 RFLAGS: 00010206
RAX: 00000000000f0000 RBX: ff34c9efc9c00000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff34c9efc9c00000
RBP: ff34c9efc27d4828 R8: 0000000000000093 R9: 0000000000000040
R10: ff34c9efc27d4828 R11: 0000000000000040 R12: 0000000000100000
R13: 0000000000000010 R14: R15:
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ff72159bcfe5bdf8] ice_sriov_post_vsi_rebuild at ffffffffc0a85e2e [ice]
#8 [ff72159bcfe5be08] ice_reset_all_vfs at ffffffffc0a920b4 [ice]
#9 [ff72159bcfe5be48] ice_service_task at ffffffffc0a31519 [ice]
#10 [ff72159bcfe5be88] process_one_work at ffffffffaa93dca4
#11 [ff72159bcfe5bec8] worker_thread at ffffffffaa93e9de
#12 [ff72159bcfe5bf18] kthread at ffffffffaa946663
#13 [ff72159bcfe5bf50] ret_from_fork at ffffffffaa8086b9
The panic occurs attempting to dereference the NULL pointer in RDX at
ice_sriov.c:294, which loads vsi->txq_map (offset 0x4b8 in ice_vsi).
The faulting VSI is an allocated slab object but not fully initialized
after a failed ice_vsi_rebuild():
crash> struct ice_vsi 0xff34c9efc27d4828
netdev = 0x0,
rx_rings = 0x0,
tx_rings = 0x0,
q_vectors = 0x0,
txq_map = 0x0,
rxq_map = 0x0,
alloc_txq = 0x10,
num_txq = 0x10,
alloc_rxq = 0x10,
num_rxq = 0x10,
The nvmupdate64e process was performing NVM firmware update:
crash> bt 0xff34c9edd1a30000
PID: 49858 TASK: ff34c9edd1a30000 CPU: 1 COMMAND: "nvmupdate64e"
#0 [ff72159bcd617618] __schedule at ffffffffab5333f8
#4 [ff72159bcd617750] ice_sq_send_cmd at ffffffffc0a35347 [ice]
#5 [ff72159bcd6177a8] ice_sq_send_cmd_retry at ffffffffc0a35b47 [ice]
#6 [ff72159bcd617810] ice_aq_send_cmd at ffffffffc0a38018 [ice]
#7 [ff72159bcd617848] ice_aq_read_nvm at ffffffffc0a40254 [ice]
#8
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Bounds-check devid in __rlookup_amd_iommu()
iommu_device_register() walks every device on the PCI bus via
bus_for_each_dev() and calls amd_iommu_probe_device() for each. The
inlined check_device() path computes the device's sbdf, calls
rlookup_amd_iommu() to find the owning IOMMU, and only afterwards
verifies devid <= pci_seg->last_bdf. __rlookup_amd_iommu() indexes
rlookup_table[devid] with no bounds check of its own, so for a PCI
device whose BDF is not described by the IVRS, the lookup reads past
the end of the allocation before the caller's bounds check can run.
This was harmless before commit e874c666b15b ("iommu/amd: Change
rlookup, irq_lookup, and alias to use kvalloc()"): the table was a
zeroed page-order allocation, so the over-read returned NULL and the
caller's NULL check skipped the device. After that commit the table is
a tight kvcalloc() and the over-read returns adjacent slab contents,
which check_device() then dereferences as a struct amd_iommu *,
causing a boot-time GPF.
Seen on Google Compute Engine ct6e VMs, where the virtualized IVRS
describes only the four TPU endpoints 00:04.0-07.0; the gVNIC at
00:08.0 (devid 0x40) indexes 56 bytes past the 456-byte allocation,
into the adjacent kmalloc-512 slab object:
pci 0000:00:04.0: Adding to iommu group 0
pci 0000:00:05.0: Adding to iommu group 1
pci 0000:00:06.0: Adding to iommu group 2
pci 0000:00:07.0: Adding to iommu group 3
Oops: general protection fault, probably for non-canonical address 0x3a64695f78746382: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.22 #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/06/2025
RIP: 0010:amd_iommu_probe_device+0x54/0x3a0
Call Trace:
__iommu_probe_device+0x107/0x520
probe_iommu_group+0x29/0x50
bus_for_each_dev+0x7e/0xe0
iommu_device_register+0xc9/0x240
iommu_go_to_state+0x9c0/0x1c60
amd_iommu_init+0x14/0x40
pci_iommu_init+0x16/0x60
do_one_initcall+0x47/0x2f0
Guard the array access in __rlookup_amd_iommu(). With the fix applied
on 6.18.22, the gVNIC at 00:08.0 is skipped cleanly and the VM boots. |
| In the Linux kernel, the following vulnerability has been resolved:
arm_mpam: Check whether the config array is allocated before destroying it
__destroy_component_cfg() is called to free the configuration array.
It uses the embedded 'garbage' structure, which means the array has
to be allocated.
If __destroy_component_cfg() is called from mpam_disable() before the
configuration was ever allocated, then a NULL pointer is dereferenced.
Check for this case and return early if the configuration is not
allocated.
__destroy_component_cfg() also frees the mbwu_state as this is allocated
by __allocate_component_cfg(). As the mbwu_state is allocated after
comp->cfg is set, and is also under mpam_list_lock, only the first
pointer needs checking. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mvebu: fix NULL pointer dereference in suspend/resume
mvebu_pwm_suspend() and mvebu_pwm_resume() are called for all GPIO
banks during suspend/resume, but not all banks have PWM functionality.
GPIO banks without PWM have mvchip->mvpwm set to NULL.
Calling mvebu_pwm_suspend() with mvpwm == NULL causes a NULL pointer
dereference when it tries to access mvpwm->blink_select.
Unable to handle kernel NULL pointer dereference at virtual address 00000020 when write
[00000020] *pgd=00000000
Internal error: Oops: 815 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 UID: 0 PID: 406 Comm: sh Not tainted 6.12.74-rt12-yocto-standard-g4e96f98fb7db-dirty #353
Hardware name: Marvell Armada 370/XP (Device Tree)
PC is at regmap_mmio_read+0x38/0x54
LR is at regmap_mmio_read+0x38/0x54
pc : [<c05fd2ac>] lr : [<c05fd2ac>] psr: 200f0013
sp : f0c11d10 ip : 00000000 fp : c100d2f0
r10: c14fb854 r9 : 00000000 r8 : 00000000
r7 : c1799c00 r6 : 00000020 r5 : 00000020 r4 : c179c7c0
r3 : f0a231a0 r2 : 00000020 r1 : 00000020 r0 : 00000000
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: 135ec059 DAC: 00000051
Call trace:
regmap_mmio_read from _regmap_bus_reg_read+0x78/0xac
_regmap_bus_reg_read from _regmap_read+0x60/0x154
_regmap_read from regmap_read+0x3c/0x60
regmap_read from mvebu_gpio_suspend+0xa4/0x14c
mvebu_gpio_suspend from dpm_run_callback+0x54/0x180
dpm_run_callback from device_suspend+0x124/0x630
device_suspend from dpm_suspend+0x124/0x270
dpm_suspend from dpm_suspend_start+0x64/0x6c
dpm_suspend_start from suspend_devices_and_enter+0x140/0x8e8
suspend_devices_and_enter from pm_suspend+0x2fc/0x308
pm_suspend from state_store+0x6c/0xc8
state_store from kernfs_fop_write_iter+0x10c/0x1f8
kernfs_fop_write_iter from vfs_write+0x270/0x468
vfs_write from ksys_write+0x70/0xf0
ksys_write from ret_fast_syscall+0x0/0x54
Add a NULL check for mvchip->mvpwm before calling the PWM
suspend/resume functions. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: revalidate bridge ports
ebt_redirect_tg() dereferences br_port_get_rcu() return without a
NULL check, causing a kernel panic when the bridge port has been
removed between the original hook invocation and an NFQUEUE
reinject.
A mere NULL check isn't sufficient, however. As sashiko review
points out userspace can not only remove the port from the bridge,
it could also place the device in a different virtual device, e.g.
macvlan.
If this happens, we must drop the packet, there is no way for us to
reinject it into the bridge path.
Switch to _upper API, we don't need the bridge port structure.
Also, this fix keeps another bug intact:
Both nfnetlink_log and nfnetlink_queue use CONFIG_BRIDGE_NETFILTER
too aggressive, which prevents certain logging features when queueing
in bridge family: NETFILTER_FAMILY_BRIDGE can be enabled while the old
CONFIG_BRIDGE_NETFILTER cruft is off.
Fixes tag is a common ancestor, this was always broken. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix NULL pointer dereference
PCIe errors detected by a Root Port or Downstream Port cause error
recovery services to run on all subordinate devices regardless of
administrative state.
The .error_detected() callback, bnxt_io_error_detected(), disables
and synchronizes IRQs via bnxt_disable_int_sync(), which calls
bnxt_cp_num_to_irq_num() to map completion rings to IRQs using
bp->bnapi.
Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe
error recovery on a closed NIC can dereference a NULL pointer.
Check if bp->bnapi is NULL before disabling and synchronizing IRQs. |
| In the Linux kernel, the following vulnerability has been resolved:
locking/rtmutex: Skip remove_waiter() when waiter is not enqueued
syzbot triggered the following splat in remove_waiter() via
FUTEX_CMP_REQUEUE_PI:
KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f]
class_raw_spinlock_constructor
remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561
rt_mutex_start_proxy_lock+0x103/0x120
futex_requeue+0x10e4/0x20d0
__x64_sys_futex+0x34f/0x4d0
task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection,
leaving waiter->task nil, where 3bfdc63936dd ("rtmutex: Use waiter::task instead
of current in remove_waiter()") made this fatal.
Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter()
upon a successfully grabbing the rtmutex. 1a1fb985f2e2 ("futex: Handle early deadlock
return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock()
(where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check to
account for try_to_take_rt_mutex(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix NULL dereference in get_queue_ids()
When usr_queue_id_array is NULL and num_queues is non-zero,
get_queue_ids() returns NULL. The callers check only IS_ERR() on the
return value; since IS_ERR(NULL) == false the check passes, and
suspend_queues() calls q_array_invalidate() which immediately
dereferences NULL while iterating num_queues times.
Userspace can trigger this via kfd_ioctl_set_debug_trap() by supplying
num_queues > 0 with a zero queue_array_ptr, causing a kernel panic.
A NULL usr_queue_id_array with num_queues == 0 is a legitimate no-op
(q_array_invalidate never executes, and resume_queues already guards
all queue_ids dereferences behind a NULL check). Return ERR_PTR(-EINVAL)
only when num_queues is non-zero and the pointer is absent; both callers
already propagate IS_ERR() returns correctly to userspace.
(cherry picked from commit f165a82cdf503884bb1797771c61b2fcc72113d4) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL deref and buffer over-read in SDP debugfs
[Why & How]
dp_sdp_message_debugfs_write() dereferences connector->base.state->crtc
without checking for NULL. A connector can be connected but not bound to
any CRTC (e.g. after hot-plug before the next atomic commit), causing a
kernel crash when writing to the sdp_message debugfs node.
The function also ignores the user-provided size argument and always
passes 36 bytes to copy_from_user(), reading past the user buffer when
size < 36.
Fix both issues by:
- Returning -ENODEV when connector->base.state or state->crtc is NULL
- Clamping write_size to min(size, sizeof(data))
(cherry picked from commit 6ab4c36a522842ff70474a1c0af2e40e50fc8300) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: test_run: Fix the null pointer dereference issue in bpf_lwt_xmit_push_encap
The bpf_lwt_xmit_push_encap helper needs to access skb_dst(skb)->dev to
calculate the needed headroom:
err = skb_cow_head(skb,
len + LL_RESERVED_SPACE(skb_dst(skb)->dev));
But skb->_skb_refdst may not be initialized when the skb is set up by
bpf_prog_test_run_skb function. Executing bpf_lwt_push_ip_encap function
in this scenario will trigger null pointer dereference, causing a kernel
crash as Yinhao reported:
[ 105.186365] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 105.186382] #PF: supervisor read access in kernel mode
[ 105.186388] #PF: error_code(0x0000) - not-present page
[ 105.186393] PGD 121d3d067 P4D 121d3d067 PUD 106c83067 PMD 0
[ 105.186404] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 105.186412] CPU: 3 PID: 3250 Comm: poc Kdump: loaded Not tainted 6.19.0-rc5 #1
[ 105.186423] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 105.186427] RIP: 0010:bpf_lwt_push_ip_encap+0x1eb/0x520
[ 105.186443] Code: 0f 84 de 01 00 00 0f b7 4a 04 66 85 c9 0f 85 47 01 00 00 31 c0 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc 48 8b 73 58 48 83 e6 fe <48> 8b 36 0f b7 be ec 00 00 00 0f b7 b6 e6 00 00 00 01 fe 83 e6 f0
[ 105.186449] RSP: 0018:ffffbb0e0387bc50 EFLAGS: 00010246
[ 105.186455] RAX: 000000000000004e RBX: ffff94c74e036500 RCX: ffff94c74874da00
[ 105.186460] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff94c74e036500
[ 105.186463] RBP: 0000000000000001 R08: 0000000000000002 R09: 0000000000000000
[ 105.186467] R10: ffffbb0e0387bd50 R11: 0000000000000000 R12: ffffbb0e0387bc98
[ 105.186471] R13: 0000000000000014 R14: 0000000000000000 R15: 0000000000000002
[ 105.186484] FS: 00007f166aa4d680(0000) GS:ffff94c8b7780000(0000) knlGS:0000000000000000
[ 105.186490] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 105.186494] CR2: 0000000000000000 CR3: 000000015eade001 CR4: 0000000000770ee0
[ 105.186499] PKRU: 55555554
[ 105.186502] Call Trace:
[ 105.186507] <TASK>
[ 105.186513] bpf_lwt_xmit_push_encap+0x2b/0x40
[ 105.186522] bpf_prog_a75eaad51e517912+0x41/0x49
[ 105.186536] ? kvm_clock_get_cycles+0x18/0x30
[ 105.186547] ? ktime_get+0x3c/0xa0
[ 105.186554] bpf_test_run+0x195/0x320
[ 105.186563] ? bpf_test_run+0x10f/0x320
[ 105.186579] bpf_prog_test_run_skb+0x2f5/0x4f0
[ 105.186590] __sys_bpf+0x69c/0xa40
[ 105.186603] __x64_sys_bpf+0x1e/0x30
[ 105.186611] do_syscall_64+0x59/0x110
[ 105.186620] entry_SYSCALL_64_after_hwframe+0x76/0xe0
[ 105.186649] RIP: 0033:0x7f166a97455d
Temporarily add the setting of skb->_skb_refdst before bpf_test_run to resolve the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: prevent NULL vif dereference in mt7925_mac_write_txwi
Check for a NULL `vif` before accessing `ieee80211_vif_is_mld(vif)` to
avoid a potential kernel panic in scenarios where `vif` might not be
initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix error pointer dereference
The function brcmf_chip_add_core() can return an error pointer and is
not checked. Add checks for error pointer.
Detected by Smatch:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1010 brcmf_chip_recognition() error:
'core' dereferencing possible ERR_PTR()
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1013 brcmf_chip_recognition() error:
'core' dereferencing possible ERR_PTR()
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1016 brcmf_chip_recognition() error:
'core' dereferencing possible ERR_PTR()
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1019 brcmf_chip_recognition() error:
'core' dereferencing possible ERR_PTR()
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1022 brcmf_chip_recognition() error:
'core' dereferencing possible ERR_PTR()
[add missing wifi: prefix] |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_fw: fix NULL dereference of "old" filters before change()
Like pointed out by Sashiko [1], since commit ed76f5edccc9 ("net: sched:
protect filter_chain list with filter_chain_lock mutex") TC filters are
added to a shared block and published to datapath before their ->change()
function is called. This is a problem for cls_fw: an invalid filter
created with the "old" method can still classify some packets before it
is destroyed by the validation logic added by Xiang.
Therefore, insisting with repeated runs of the following script:
# ip link add dev crash0 type dummy
# ip link set dev crash0 up
# mausezahn crash0 -c 100000 -P 10 \
> -A 4.3.2.1 -B 1.2.3.4 -t udp "dp=1234" -q &
# sleep 1
# tc qdisc add dev crash0 egress_block 1 clsact
# tc filter add block 1 protocol ip prio 1 matchall \
> action skbedit mark 65536 continue
# tc filter add block 1 protocol ip prio 2 fw
# ip link del dev crash0
can still make fw_classify() hit the WARN_ON() in [2]:
WARNING: ./include/net/pkt_cls.h:88 at fw_classify+0x244/0x250 [cls_fw], CPU#18: mausezahn/1399
Modules linked in: cls_fw(E) act_skbedit(E)
CPU: 18 UID: 0 PID: 1399 Comm: mausezahn Tainted: G E 7.0.0-rc6-virtme #17 PREEMPT(full)
Tainted: [E]=UNSIGNED_MODULE
Hardware name: Red Hat KVM, BIOS 1.16.3-2.el9 04/01/2014
RIP: 0010:fw_classify+0x244/0x250 [cls_fw]
Code: 5c 49 c7 45 00 00 00 00 00 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 5b b8 ff ff ff ff 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 90 <0f> 0b 90 eb a0 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffd1b7026bf8a8 EFLAGS: 00010202
RAX: ffff8c5ac9c60800 RBX: ffff8c5ac99322c0 RCX: 0000000000000004
RDX: 0000000000000001 RSI: ffff8c5b74d7a000 RDI: ffff8c5ac8284f40
RBP: ffffd1b7026bf8d0 R08: 0000000000000000 R09: ffffd1b7026bf9b0
R10: 00000000ffffffff R11: 0000000000000000 R12: 0000000000010000
R13: ffffd1b7026bf930 R14: ffff8c5ac8284f40 R15: 0000000000000000
FS: 00007fca40c37740(0000) GS:ffff8c5b74d7a000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fca40e822a0 CR3: 0000000005ca0001 CR4: 0000000000172ef0
Call Trace:
<TASK>
tcf_classify+0x17d/0x5c0
tc_run+0x9d/0x150
__dev_queue_xmit+0x2ab/0x14d0
ip_finish_output2+0x340/0x8f0
ip_output+0xa4/0x250
raw_sendmsg+0x147d/0x14b0
__sys_sendto+0x1cc/0x1f0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x126/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fca40e822ba
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffc248a42c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055ef233289d0 RCX: 00007fca40e822ba
RDX: 000000000000001e RSI: 000055ef23328c30 RDI: 0000000000000003
RBP: 000055ef233289d0 R08: 00007ffc248a42d0 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000001e
R13: 00000000000186a0 R14: 0000000000000000 R15: 00007fca41043000
</TASK>
irq event stamp: 1045778
hardirqs last enabled at (1045784): [<ffffffff864ec042>] __up_console_sem+0x52/0x60
hardirqs last disabled at (1045789): [<ffffffff864ec027>] __up_console_sem+0x37/0x60
softirqs last enabled at (1045426): [<ffffffff874d48c7>] __alloc_skb+0x207/0x260
softirqs last disabled at (1045434): [<ffffffff874fe8f8>] __dev_queue_xmit+0x78/0x14d0
Then, because of the value in the packet's mark, dereference on 'q->handle'
with NULL 'q' occurs:
BUG: kernel NULL pointer dereference, address: 0000000000000038
[...]
RIP: 0010:fw_classify+0x1fe/0x250 [cls_fw]
[...]
Skip "old-style" classification on shared blocks, so that the NULL
dereference is fixed and WARN_ON() is not hit anymore in the short
lifetime of invalid cls_fw "old-style" filters.
[1] https://sashiko.dev/#/patchset/2
---truncated--- |
