| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An out-of-bounds write vulnerability in the Qt Framework assimp scene import plugin of the Qt3D module. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject SetEA requests that do not fit the request buffer
CIFSSMBSetEA() copies the caller's extended attribute value into the
SMB request buffer without checking that it fits. The requirement is
stated in the source but was never implemented:
/*BB add length check to see if it would fit in
negotiated SMB buffer size BB */
/* if (ea_value_len > buffer_size - 512 (enough for header)) */
if (ea_value_len)
memcpy(parm_data->list.name + name_len + 1,
ea_value, ea_value_len);
The only bound applied on the way in is in cifs_xattr_set():
#define MAX_EA_VALUE_SIZE CIFSMaxBufSize
...
if (size > MAX_EA_VALUE_SIZE)
CIFSMaxBufSize is the full payload capacity of the buffer, so a value
of exactly that size leaves no room for the SMB header, the TRANS2
parameter block, the fealist header and the EA name that are written
ahead of it in the same object.
SendReceive() already enforces the correct limit on this very length:
if (in_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE)
but it is called after the copy has taken place. An unprivileged
setxattr(2) on an SMB1 mount with a 250-byte name and a 16384-byte
value writes 16384 bytes starting 345 bytes into a 16588-byte
cifs_request object, ending 141 bytes past it:
BUG: KASAN: slab-out-of-bounds in CIFSSMBSetEA+0xabc/0xde0
Write of size 16384 at addr ffff888003aa0159 by task init/68
__asan_memcpy+0x3c/0x60
CIFSSMBSetEA+0xabc/0xde0
cifs_xattr_set+0xd3a/0xff0
__vfs_setxattr+0x13e/0x1a0
The buggy address is located 345 bytes inside of
allocated 16588-byte region
Apply SendReceive()'s limit to the assembled request before the copy
rather than after it, and widen the byte counters so the sum cannot
wrap before it is tested.
byte_count is also tested against U16_MAX, because it is stored in the
16-bit pSMB->ByteCount. That becomes reachable when CIFSMaxBufSize is
raised at module load, where it may be set as high as 1024*127: with a
5-byte EA name and a 65521-byte value, count is exactly U16_MAX while
byte_count is 65556, and cpu_to_le16() would truncate it to 20 and
transmit a frame whose ByteCount does not match its length. Testing
byte_count covers count as well, since byte_count is the larger of the
two and count's only 16-bit consumer is written after this point.
check_add_overflow() is evaluated first so that total_len is assigned
before it is reported. |
| SDL_mixer 3.1.2 through 3.2.4 contains a stack-based buffer overflow in FetchXLaw() in src/decoder_aiff.c due to miscalculated output offsets when expanding A-law or mu-law samples. Attackers can supply a crafted AIFF-C file that overwrites roughly 1 KB of adjacent stack memory when decoded, causing crashes or potential code execution. |
| ASN1SCC is an open source ASN.1 compiler for embedded systems. Prior to 4.7.0.1, BitStream_DecodeConstraintWholeNumber in asn1crt/asn1crt_encoding.c reads enough bits for a constrained integer but does not reject values above the declared range when the encoded range is not a power of two. Generated uPER and ACN decoders for variable-size SEQUENCE OF, OCTET STRING, BIT STRING, and string values use the invalid result as a loop or copy length, so a crafted over-range size field can write beyond a destination buffer. Decoding untrusted affected data can corrupt heap or stack memory, cause a crash, or potentially permit code execution. This issue is fixed in version 4.7.0.1. |
| ASN1SCC is an open source ASN.1 compiler for embedded systems. Prior to 4.7.0.1, the XER tokenizer NT() in asn1crt/asn1crt_encoding_xer.c, which is reached by all XER decode paths, copies tag characters into a fixed char Value[100] field without a length bound and reads input and lookahead bytes without checking the buffer count. A crafted XER message with an overlong tag can overwrite the tokenizer's stack frame, while a truncated tag or unterminated processing-instruction or comment sequence can read beyond the input and may cause a CPU spin. The flaws can disclose adjacent memory, corrupt stack data, crash or hang the decoder, and potentially permit code execution. This issue is fixed in version 4.7.0.1. |
| WebAssembly Micro Runtime (WAMR) is a lightweight standalone WebAssembly (Wasm) runtime. Prior to 2.4.5, the two-pass fast interpreter loader in core/iwasm/interpreter/wasm_loader.c can make inconsistent constant-table decisions between the sizing pass and the emitting pass. After duplicate constants inflate the first pass beyond the constant-slot limit, wasm_loader_get_const_offset emits later constants inline, but the between-pass sort and deduplication reduces the table so the second pass can choose table references and cause reserve_block_ret to emit additional copy operands that were not included in code_compiled_peak_size. A crafted module can therefore make the second pass write partially attacker-controlled compiled-code data beyond the heap buffer allocated from the first pass's size calculation during wasm_runtime_load, before guest code executes. This can corrupt host heap metadata and deterministically crash the process, causing denial of service; further consequences depend on the host application's heap layout. Builds using WAMR_BUILD_FAST_INTERP=1 are affected; disabling the fast interpreter avoids the vulnerable loader. This issue is fixed in version 2.4.5. |
| VRPN through 07.36 contains an out-of-bounds stack write vulnerability in vrpn_Endpoint::handle_sender_message() and handle_type_message() that allows unauthenticated remote peers to write outside a stack buffer via an unchecked length index. Attackers can connect, complete the version-cookie exchange, and send a SENDER_DESCRIPTION or TYPE_DESCRIPTION message with an out-of-range or negative index to crash the process. |
| libnxml before 0.18.6 contains a stack-based buffer overflow vulnerability in src/nxml_parser.c that allows remote attackers to write past a 1024-byte stack buffer via long XML names. Attackers can supply XML or RSS feeds with a 1022-character element, attribute, DOCTYPE or entity name ending in a multi-byte UTF-8 character to crash parsing applications. |
| Git for Windows is the Windows port of Git. From 2.44.0.windows.1 until 2.55.0.windows.3, the git-credential-wincred store operation in contrib/credential/wincred/git-credential-wincred.c uses _scwprintf() to size a formatted wide-character credential buffer without space for the terminating NUL when both password and oauth_refresh_token are present. The operation also passes a byte count to _snwprintf_s() where a wide-character count is required, allowing the terminator to be written one WCHAR past the heap allocation before CredWriteW() persists the credential. The resulting fixed two-byte NUL overwrite can terminate the helper with Windows heap-corruption status and can cause git credential approve to report success even though the OAuth credential was not stored. This issue is fixed in version 2.55.0.windows.3. |
| Git for Windows is the Windows port of Git. From 2.43.0.windows.1 until 2.55.0.windows.3, when a matching git:* credential exists in Windows Credential Manager and a git-credential-wincred erase input includes a password field, the operation in contrib/credential/wincred/git-credential-wincred.c allocates a buffer of exactly CredentialBlobSize bytes in match_cred_password() and then uses wcsncpy_s() to copy the corresponding number of wide characters plus a terminating NUL. The destination capacity is also supplied in bytes instead of WCHAR elements, allowing a fixed two-byte NUL write past the allocation before the password comparison determines whether CredDeleteW() should remove the credential; erase without a password field does not enter this comparison path. The helper can terminate with Windows heap-corruption status, and git credential reject can appear successful while the rejected credential remains stored. This issue is fixed in version 2.55.0.windows.3. |
| musl libc before 1.2.7, when an untrusted regular expression is used with regcomp, has multiple integer overflows, possibly leading to incorrect allocation sizes and out-of-bounds heap writes. |
| A local privilege escalation vulnerability in Thales SafeNet Authentication Client (SAC) SACSrv can allow an authenticated, non-administrator local user to trigger a heap-based buffer overflow through the service interface. Successful exploitation may allow arbitrary code execution with Local System privileges.This issue affects SAC releases up to and including 10.9 R3 GA (build 10.9.7449). |
| A stack-based buffer overflow in Thales SafeNet Authentication Client (SAC) SIS token engine processing can be triggered by a malicious physical or software-emulated smart card. The issue can occur before authentication or PIN entry and may
cause a denial of service or potentially arbitrary code execution with the privileges of the affected process. Affected releases start with SAC 10.8 R7 and include SAC 10.9 R3 GA (build 10.9.7449). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Use kvfree instead of kfree in amdgpu_gmc_get_nps_memranges()
amdgpu_discovery_get_nps_info() internally allocates memory for ranges
using kvcalloc(), which may use vmalloc() for large allocation. Using
kfree() to release vmalloc memory will lead to a memory corruption.
Use kvfree() to safely handle both kmalloc and vmalloc allocations.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
APEI/GHES: ensure that won't go past CPER allocated record
The logic at ghes_new() prevents allocating too large records, by
checking if they're bigger than GHES_ESTATUS_MAX_SIZE (currently, 64KB).
Yet, the allocation is done with the actual number of pages from the
CPER bios table location, which can be smaller.
Yet, a bad firmware could send data with a different size, which might
be bigger than the allocated memory, causing an OOPS:
Unable to handle kernel paging request at virtual address fff00000f9b40000
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
Data abort info:
ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 52-bit VAs, pgdp=000000008ba16000
[fff00000f9b40000] pgd=180000013ffff403, p4d=180000013fffe403, pud=180000013f85b403, pmd=180000013f68d403, pte=0000000000000000
Internal error: Oops: 0000000096000007 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 303 Comm: kworker/0:1 Not tainted 6.19.0-rc1-00002-gda407d200220 #34 PREEMPT
Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022
Workqueue: kacpi_notify acpi_os_execute_deferred
pstate: 214020c5 (nzCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : hex_dump_to_buffer+0x30c/0x4a0
lr : hex_dump_to_buffer+0x328/0x4a0
sp : ffff800080e13880
x29: ffff800080e13880 x28: ffffac9aba86f6a8 x27: 0000000000000083
x26: fff00000f9b3fffc x25: 0000000000000004 x24: 0000000000000004
x23: ffff800080e13905 x22: 0000000000000010 x21: 0000000000000083
x20: 0000000000000001 x19: 0000000000000008 x18: 0000000000000010
x17: 0000000000000001 x16: 00000007c7f20fec x15: 0000000000000020
x14: 0000000000000008 x13: 0000000000081020 x12: 0000000000000008
x11: ffff800080e13905 x10: ffff800080e13988 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000001 x6 : 0000000000000020
x5 : 0000000000000030 x4 : 00000000fffffffe x3 : 0000000000000000
x2 : ffffac9aba78c1c8 x1 : ffffac9aba76d0a8 x0 : 0000000000000008
Call trace:
hex_dump_to_buffer+0x30c/0x4a0 (P)
print_hex_dump+0xac/0x170
cper_estatus_print_section+0x90c/0x968
cper_estatus_print+0xf0/0x158
__ghes_print_estatus+0xa0/0x148
ghes_proc+0x1bc/0x220
ghes_notify_hed+0x5c/0xb8
notifier_call_chain+0x78/0x148
blocking_notifier_call_chain+0x4c/0x80
acpi_hed_notify+0x28/0x40
acpi_ev_notify_dispatch+0x50/0x80
acpi_os_execute_deferred+0x24/0x48
process_one_work+0x15c/0x3b0
worker_thread+0x2d0/0x400
kthread+0x148/0x228
ret_from_fork+0x10/0x20
Code: 6b14033f 540001ad a94707e2 f100029f (b8747b44)
---[ end trace 0000000000000000 ]---
Prevent that by taking the actual allocated are into account when
checking for CPER length.
[ rjw: Subject tweaks ] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate LTK enc_size on load
Load Long Term Keys stores the user-provided enc_size and later uses
it to size fixed-size stack operations when replying to LE LTK
requests. An enc_size larger than the 16-byte key buffer can therefore
overflow the reply stack buffer.
Reject oversized enc_size values while validating the management LTK
record so invalid keys never reach the stored key state. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix missing validation of ticket length in non-XDR key preparsing
In rxrpc_preparse(), there are two paths for parsing key payloads: the
XDR path (for large payloads) and the non-XDR path (for payloads <= 28
bytes). While the XDR path (rxrpc_preparse_xdr_rxkad()) correctly
validates the ticket length against AFSTOKEN_RK_TIX_MAX, the non-XDR
path fails to do so.
This allows an unprivileged user to provide a very large ticket length.
When this key is later read via rxrpc_read(), the total
token size (toksize) calculation results in a value that exceeds
AFSTOKEN_LENGTH_MAX, triggering a WARN_ON().
[ 2001.302904] WARNING: CPU: 2 PID: 2108 at net/rxrpc/key.c:778 rxrpc_read+0x109/0x5c0 [rxrpc]
Fix this by adding a check in the non-XDR parsing path of rxrpc_preparse()
to ensure the ticket length does not exceed AFSTOKEN_RK_TIX_MAX,
bringing it into parity with the XDR parsing logic. |
| A buffer overflow vulnerability in the Brotli decoder (c/dec/decode.c) in Google Brotli versions 1.0.3 through 1.2.0 on all platforms allows a remote unauthenticated attacker to corrupt adjacent decoder state memory, disclose sensitive memory contents, cause a denial of service, or potentially execute arbitrary code using a crafted Brotli-compressed stream.
Users need to update any Brotli libraries or binaries between 1.0.3 through 1.2.0 to the latest available version: 1.0.10 or 1.1.1 or 1.2.1. |
| A Stack-based Buffer Overflow vulnerability [CWE-121] vulnerability in Fortinet FortiWeb 8.0.0 through 8.0.2, FortiWeb 7.6.0 through 7.6.6, FortiWeb 7.4 all versions, FortiWeb 7.2 all versions, FortiWeb 7.0.2 through 7.0.12 may allow a remote authenticated attacker who can bypass stack protection and ASLR to execute arbitrary code or commands via crafted HTTP requests. |
| Netpbm before 10.86.51, 11.x before 11.02.30, and 11.03 before 11.15.08 contains a stack-based buffer overflow in picttoppm's scanPoly() function in converter/ppm/picttoppm.c. Attackers can supply a crafted PICT file whose polygon edges produce more than 5000 points, overflowing the coord stack array to crash the converter or potentially execute code. |
