| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An unprivileged application can exploit a lack of package/signature validation in SystemUI's `RemoteQCController` when resolving a hardcoded `content://` URI. This allows the attacker to squat on a specific authority if the legitimate package is absent, inject spoofed UI elements into the trusted SystemUI Quick Controls panel, and gain a Background Activity Launch (BAL) grant from SystemUI when the user interacts with the spoofed element. |
| SoupAuthManager caches proxy authentication credentials without scoping them to the proxy authority (host:port). When the proxy configuration changes (e.g., via system settings or WPAD), cached Proxy-Authorization headers from the previous proxy are sent to the new proxy, leaking credentials. |
| A flaw was found in 389 Directory Server. The PBKDF2-SHA256 password verification function uses standard memcmp() for comparing password hashes instead of a constant-time comparison function. A remote attacker could potentially use timing measurements of LDAP bind attempts to infer partial hash information, though practical exploitation is extremely difficult due to PBKDF2 computational overhead. |
| A flaw was found in the GIF parser of GdkPixbuf’s LZW decoder. When an invalid symbol is encountered during decompression, the decoder sets the reported output size to the full buffer length rather than the actual number of written bytes. This logic error results in uninitialized sections of the buffer being included in the output, potentially leaking arbitrary memory contents in the processed image. |
| A flaw was found in libslirp. When handling ICMP echo requests, the reply length is not updated to match the actual data received from the host. Under specific conditions where the normal ICMP socket is unavailable, this length mismatch causes the host's real IP address to be leaked to the guest in the echo reply, breaking the NAT isolation that user-mode networking is expected to provide. |
| A flaw was found in the token sanitization logic of Keycloak, an open source identity and access management solution. The issue occurs when a protocol mapper is configured to emit structured claims using the JSON type. The security check designed to remove unauthorized role mappings only looks for standard Java maps and fails to recognize Jackson based JSON objects. This allows an attacker to inject forged client roles into security tokens, which could lead to unauthorized access to protected resources. |
| A flaw was found in the SAML protocol implementation of Keycloak, an open-source identity and access management solution. The issue occurs when Keycloak handles SAML authentication requests using the HTTP-Redirect binding. If a client is configured with a wildcard redirect URL, an attacker can craft a request that includes malicious parameters. When a user authenticates, Keycloak appends its legitimate response to the attacker's parameters. This can cause some service providers to process the attacker's data instead of the real login information, potentially leading to a user being logged into the wrong account. |
| In writeGrantedUriPermissions of UriGrantsManagerService.java, there is a possible permission bypass due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Gitea Actions task tokens authenticate to the REST API as a shared system user with a negative ID, which repository, organization, project and key filters treated as having no owner restriction, and the token carried no API scope to restrict user-scoped routes. A user who can run a workflow could use the job's token with `GET /api/v1/user/repos` to list every repository on the instance, including private repositories of other users and organizations, with their metadata. Repository contents remained protected by per-repository permission checks. System users now own nothing, and `/api/v1/user` routes other than `GET /api/v1/user` accept only individual and bot accounts. |
| `GET /api/v1/users/{username}/heatmap` computed the contribution heatmap with the repository access of the token owner and ignored the public-only restriction of the access token, unlike the activity feed endpoints. A holder of a user's public-only token could read contribution counts and their 15-minute time buckets that stem from that user's activity in private repositories. Repository names and contents were not disclosed. For public-only tokens the heatmap now only counts activity visible to anonymous users. |
| In multiple locations, there is a possible denial of service due to a missing permission check. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In onCreate of SettingsApplication.java, there is a possible cross-profile consent dialog label injection due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| A flaw was found in the Client-Initiated Backchannel Authentication (CIBA) implementation of Keycloak. The CIBA endpoint fails to properly validate the sub parameter, allowing it to be stored as an additional request parameter. During the token issuance process, this injected value overwrites the legitimate subject identifier. This allows an attacker to authenticate as themselves but receive security tokens belonging to a different victim user, leading to unauthorized account access. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix the checksum validations
ip_vs_in_icmp_v6() is missing checksum validation for ICMPv6
packets from clients. In fact, as for TCP/UDP we should
validate the checksum for ICMP packets only when we
mangle the packets on MASQ or on reply for tunnel.
Also, Sashiko points out that handle_response_icmp() being
common for IPv4 and IPv6 is missing the pseudo-header
calculation while validating ICMPv6 messages from real
servers which is a problem if checksum is not validated
by the hardware.
Fix the problems by creating ip_vs_checksum_common_check()
helper and use it for TCP/UDP/ICMP both for IPv4 and IPv6.
Rely on the nf_checksum() for validating the ICMP messages
but use it also for TCP and UDP.
Use correct IP offset for IP_VS_DBG_RL_PKT for TCP/UDP/SCTP.
IPVS packets (TCP/UDP/SCTP/ICMP) do not need checksum
validation on LOCAL_OUT (local clients or local real
servers) and on FORWARD (traffic from servers on LAN).
Do it only on LOCAL_IN, in case nf_checksum() is not
called on PRE_ROUTING.
Also, ip_vs_checksum_complete() can be marked static. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Add missing access_ok call to copy_user_syms
As reported by sashiko we use __get_user without prior access_ok call on the
user space pointer. Adding the missing call for the whole pointer array.
Plus removing the err check in the error path, because it's not needed and
also we can return -ENOMEM directly from the first kvmalloc_array fail path.
[1] https://lore.kernel.org/bpf/20260611115503.AC16D1F00893@smtp.kernel.org/ |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: ah6: validate routing header segments_left
AH6 rearranges routing-header addresses before computing or verifying the
ICV. ipv6_rearrange_rthdr() assumes that segments_left is not larger than
the number of addresses described by the routing header's hdrlen field.
That assumption does not hold for raw IPv6 HDRINCL packets. A packet with
hdrlen equal to 2 describes one address, but can carry an arbitrary
segments_left value. With segments_left equal to 255, the function moves
its address pointer 4,064 bytes backwards and passes a 4,064-byte length to
memmove(), resulting in an out-of-bounds access.
Validate the invariant locally before modifying the routing header or
performing any address-pointer arithmetic, and propagate malformed-header
errors to the existing AH6 input and output error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: validate attr entry pointer before field access
xfs_attr3_leaf_verify_entry() accesses lentry/rentry fields (namelen,
valuelen) before checking if the entry pointer itself is within bounds.
If nameidx is crafted to point near the end of the buffer, these field
accesses can read out-of-bounds before the bounds check at
name_end > buf_end is performed.
Add explicit bounds checks for entry pointers before accessing their
fields. Use offsetof() to check that the start of the flexible array
member (nameval/name) is within bounds, which ensures all preceding
fields are safe to access. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: evdev - fix information leak in evdev_pass_values()
In evdev_pass_values(), the input_event structure is allocated on the
kernel stack and populated field-by-field. However, it is never fully
initialized. On architectures where struct input_event contains explicit
or implicit padding (such as the 32-bit __pad field on SPARC64), these
padding bytes are left uninitialized.
When this event structure is subsequently passed to the client buffer
and later copied to userspace, the uninitialized padding bytes leak
kernel stack memory, potentially exposing sensitive information.
Similar issues exist in __evdev_queue_syn_dropped and __pass_event.
Fix this by explicitly zeroing the entire event structure with memset()
before populating its fields. This ensures all padding bytes are cleared
before the data crosses the security boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flow: Dont expose folded kernel pointers
The flow classifier falls back to addr_fold() for fields that are missing
from packet headers. In map mode, userspace controls mask, xor, rshift,
addend and divisor, and can observe the resulting classid through class
statistics. This allows a tc classifier in a user/network namespace to
recover the 32-bit folded value of skb->sk, skb_dst() or skb_nfct().
Align with standard kernel practices for pointer hashing and replace the
XOR folding with a keyed siphash (which is cryptographically secure) |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: initialize gdma queue id to INVALID_QUEUE_ID
mana_gd_create_mana_wq_cq() leaves queue->id as 0 (from kzalloc_obj())
until mana_create_wq_obj() assigns the firmware-returned id. If creation
fails before that, cleanup calls mana_gd_destroy_cq() with id 0, NULLing
gc->cq_table[0] and silently breaking whichever real CQ owns that slot.
Initialize queue->id to INVALID_QUEUE_ID right after allocation, matching
mana_gd_create_eq(). The existing (id >= max_num_cqs) guard then
short-circuits cleanly. |
