Export limit exceeded: 421043 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (6790 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53073 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_ldisc: Clear HCI_UART_PROTO_INIT on error When hci_register_dev() fails in hci_uart_register_dev() HCI_UART_PROTO_INIT is not cleared before calling hu->proto->close(hu) and setting hu->hdev to NULL. This means incoming UART data will reach the protocol-specific recv handler in hci_uart_tty_receive() after resources are freed. Clear HCI_UART_PROTO_INIT with a write lock before calling hu->proto->close() and setting hu->hdev to NULL. The write lock ensures all active readers have completed and no new reader can enter the protocol recv path before resources are freed. This allows the protocol-specific recv functions to remove the "HCI_UART_REGISTERED" guard without risking a null pointer dereference if hci_register_dev() fails. | ||||
| CVE-2026-53064 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm cache: fix null-deref with concurrent writes in passthrough mode In passthrough mode, when dm-cache starts to invalidate a cache entry and bio prison cell lock fails due to concurrent write to the same cached block, mg->cell remains NULL. The error path in invalidate_complete() attempts to unlock and free the cell unconditionally, causing a NULL pointer dereference: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 UID: 0 PID: 134 Comm: fio Not tainted 6.19.0-rc7 #3 PREEMPT RIP: 0010:dm_cell_unlock_v2+0x3f/0x210 <snip> Call Trace: invalidate_complete+0xef/0x430 map_bio+0x130f/0x1a10 cache_map+0x320/0x6b0 __map_bio+0x458/0x510 dm_submit_bio+0x40e/0x16d0 __submit_bio+0x419/0x870 <snip> Reproduce steps: 1. Create a cache device dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 262144 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. Promote the first data block into cache fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \ --direct=1 --size=64k 3. Reload the cache into passthrough mode dmsetup suspend cache dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0" dmsetup resume cache 4. Write to the first cached block concurrently fio --filename=/dev/mapper/cache --name test --rw=randwrite --bs=4k \ --randrepeat=0 --direct=1 --numjobs=2 --size 64k Fix by checking if mg->cell is valid before attempting to unlock it. | ||||
| CVE-2026-53048 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: prevent NULL pointer dereference during unmount When flushing out outstanding glock work during an unmount, gfs2_log_flush() can be called when sdp->sd_jdesc has already been deallocated and sdp->sd_jdesc is NULL. Commit 35264909e9d1 ("gfs2: Fix NULL pointer dereference in gfs2_log_flush") added a check for that to gfs2_log_flush() itself, but it missed the sdp->sd_jdesc dereference in gfs2_log_release(). Fix that. | ||||
| CVE-2026-53034 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix af_unix null-ptr-deref in proto update unix_stream_connect() sets sk_state (`WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED)`) _before_ it assigns a peer (`unix_peer(sk) = newsk`). sk_state == TCP_ESTABLISHED makes sock_map_sk_state_allowed() believe that socket is properly set up, which would include having a defined peer. IOW, there's a window when unix_stream_bpf_update_proto() can be called on socket which still has unix_peer(sk) == NULL. CPU0 bpf CPU1 connect -------- ------------ WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED) sock_map_sk_state_allowed(sk) ... sk_pair = unix_peer(sk) sock_hold(sk_pair) sock_hold(newsk) smp_mb__after_atomic() unix_peer(sk) = newsk BUG: kernel NULL pointer dereference, address: 0000000000000080 RIP: 0010:unix_stream_bpf_update_proto+0xa0/0x1b0 Call Trace: sock_map_link+0x564/0x8b0 sock_map_update_common+0x6e/0x340 sock_map_update_elem_sys+0x17d/0x240 __sys_bpf+0x26db/0x3250 __x64_sys_bpf+0x21/0x30 do_syscall_64+0x6b/0x3a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Initial idea was to move peer assignment _before_ the sk_state update[1], but that involved an additional memory barrier, and changing the hot path was rejected. Then a NULL check during proto update in unix_stream_bpf_update_proto() was considered[2], but the follow-up discussion[3] focused on the root cause, i.e. sockmap update taking a wrong lock. Or, more specifically, missing unix_state_lock()[4]. In the end it was concluded that teaching sockmap about the af_unix locking would be unnecessarily complex[5]. Complexity aside, since BPF_PROG_TYPE_SCHED_CLS and BPF_PROG_TYPE_SCHED_ACT are allowed to update sockmaps, sock_map_update_elem() taking the unix lock, as it is currently implemented in unix_state_lock(): spin_lock(&unix_sk(s)->lock), would be problematic. unix_state_lock() taken in a process context, followed by a softirq-context TC BPF program attempting to take the same spinlock -- deadlock[6]. This way we circled back to the peer check idea[2]. [1]: https://lore.kernel.org/netdev/ba5c50aa-1df4-40c2-ab33-a72022c5a32e@rbox.co/ [2]: https://lore.kernel.org/netdev/20240610174906.32921-1-kuniyu@amazon.com/ [3]: https://lore.kernel.org/netdev/7603c0e6-cd5b-452b-b710-73b64bd9de26@linux.dev/ [4]: https://lore.kernel.org/netdev/CAAVpQUA+8GL_j63CaKb8hbxoL21izD58yr1NvhOhU=j+35+3og@mail.gmail.com/ [5]: https://lore.kernel.org/bpf/CAAVpQUAHijOMext28Gi10dSLuMzGYh+jK61Ujn+fZ-wvcODR2A@mail.gmail.com/ [6]: https://lore.kernel.org/bpf/dd043c69-4d03-46fe-8325-8f97101435cf@linux.dev/ Summary of scenarios where af_unix/stream connect() may race a sockmap update: 1. connect() vs. bpf(BPF_MAP_UPDATE_ELEM), i.e. sock_map_update_elem_sys() Implemented NULL check is sufficient. Once assigned, socket peer won't be released until socket fd is released. And that's not an issue because sock_map_update_elem_sys() bumps fd refcnf. 2. connect() vs BPF program doing update Update restricted per verifier.c:may_update_sockmap() to BPF_PROG_TYPE_TRACING/BPF_TRACE_ITER BPF_PROG_TYPE_SOCK_OPS (bpf_sock_map_update() only) BPF_PROG_TYPE_SOCKET_FILTER BPF_PROG_TYPE_SCHED_CLS BPF_PROG_TYPE_SCHED_ACT BPF_PROG_TYPE_XDP BPF_PROG_TYPE_SK_REUSEPORT BPF_PROG_TYPE_FLOW_DISSECTOR BPF_PROG_TYPE_SK_LOOKUP Plus one more race to consider: CPU0 bpf CPU1 connect -------- ------------ WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED) sock_map_sk_state_allowed(sk) sock_hold(newsk) smp_mb__after_atomic() ---truncated--- | ||||
| CVE-2026-53032 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL deref in map_kptr_match_type for scalar regs Commit ab6c637ad027 ("bpf: Fix a bpf_kptr_xchg() issue with local kptr") refactored map_kptr_match_type() to branch on btf_is_kernel() before checking base_type(). A scalar register stored into a kptr slot has no btf, so the btf_is_kernel(reg->btf) call dereferences NULL. Move the base_type() != PTR_TO_BTF_ID guard before any reg->btf access. | ||||
| CVE-2026-53028 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: Fix error pointer dereference The variable tps->partner is checked for an error pointer and then if it is, it sends an error message but does not return and then immediately dereferenced a few lines below: tps->partner = typec_register_partner(tps->port, &desc); if (IS_ERR(tps->partner)) dev_warn(tps->dev, "%s: failed to register partnet\n", __func__); if (desc.identity) { typec_partner_set_identity(tps->partner); cd321x->cur_partner_identity = st.partner_identity; } Add early return and fix spelling mistake in error message. Detected by Smatch: drivers/usb/typec/tipd/core.c:827 cd321x_update_work() error: 'tps->partner' dereferencing possible ERR_PTR() | ||||
| CVE-2026-53012 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nexthop: fix IPv6 route referencing IPv4 nexthop syzbot reported a panic [1] [2]. When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flag of all groups containing this nexthop is not updated. This is because nh_group_v4_update is only called when replacing AF_INET to AF_INET6, but the reverse direction (AF_INET6 to AF_INET) is missed. This allows a stale has_v4=false to bypass fib6_check_nexthop, causing IPv6 routes to be attached to groups that effectively contain only AF_INET members. Subsequent route lookups then call nexthop_fib6_nh() which returns NULL for the AF_INET member, leading to a NULL pointer dereference. Fix by calling nh_group_v4_update whenever the family changes, not just AF_INET to AF_INET6. Reproducer: # AF_INET6 blackhole ip -6 nexthop add id 1 blackhole # group with has_v4=false ip nexthop add id 100 group 1 # replace with AF_INET (no -6), has_v4 stays false ip nexthop replace id 1 blackhole # pass stale has_v4 check ip -6 route add 2001:db8::/64 nhid 100 # panic ping -6 2001:db8::1 [1] https://syzkaller.appspot.com/bug?id=e17283eb2f8dcf3dd9b47fe6f67a95f71faadad0 [2] https://syzkaller.appspot.com/bug?id=8699b6ae54c9f35837d925686208402949e12ef3 | ||||
| CVE-2026-53007 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix potential NULL pointer deref in error path of ice_set_ringparam() ice_set_ringparam nullifies tstamp_ring of temporary tx_rings, without clearing ICE_TX_RING_FLAGS_TXTIME bit. When ICE_TX_RING_FLAGS_TXTIME is set and the subsequent ice_setup_tx_ring() call fails, a NULL pointer dereference could happen in the unwinding sequence: ice_clean_tx_ring() -> ice_is_txtime_cfg() == true (ICE_TX_RING_FLAGS_TXTIME is set) -> ice_free_tx_tstamp_ring() -> ice_free_tstamp_ring() -> tstamp_ring->desc (NULL deref) Clear ICE_TX_RING_FLAGS_TXTIME bit to avoid the potential issue. Note that this potential issue is found by manual code review. Compile test only since unfortunately I don't have E830 devices. | ||||
| CVE-2026-52941 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: avoid NULL deref of conn->lnk in smc_msg_event tracepoint The smc_msg_event tracepoint class, shared by smc_tx_sendmsg and smc_rx_recvmsg, unconditionally dereferences smc->conn.lnk: __string(name, smc->conn.lnk->ibname) conn->lnk is only set for SMC-R; for SMC-D it is NULL. Other code on these paths already handles this (e.g. !conn->lnk in SMC_STAT_RMB_TX_SIZE_SMALL()). With the tracepoint enabled, the first sendmsg()/recvmsg() on an SMC-D socket crashes: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [...] RIP: 0010:strlen+0x1e/0xa0 Call Trace: trace_event_raw_event_smc_msg_event (net/smc/smc_tracepoint.h:44) smc_rx_recvmsg (net/smc/smc_rx.c:515) smc_recvmsg (net/smc/af_smc.c:2859) __sys_recvfrom (net/socket.c:2315) __x64_sys_recvfrom (net/socket.c:2326) do_syscall_64 The faulting address 0x3e0 is offsetof(struct smc_link, ibname), confirming the NULL ->lnk deref. Enabling the tracepoint requires root, but the trigger itself is unprivileged: socket(AF_SMC, ...) has no capability check, and SMC-D negotiation needs no admin step on s390 or on x86 with the loopback ISM device loaded. Log an empty device name for SMC-D instead of dereferencing NULL. | ||||
| CVE-2026-52925 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vrf: Fix a potential NPD when removing a port from a VRF RCU readers that identified a net device as a VRF port using netif_is_l3_slave() assume that a subsequent call to netdev_master_upper_dev_get_rcu() will return a VRF device. They then continue to dereference its l3mdev operations. This assumption is not always correct and can result in a NPD [1]. There is no RCU synchronization when removing a port from a VRF, so it is possible for an RCU reader to see a new master device (e.g., a bridge) that does not have l3mdev operations. Fix by adding RCU synchronization after clearing the IFF_L3MDEV_SLAVE flag. Skip this synchronization when a net device is removed from a VRF as part of its deletion and when the VRF device itself is deleted. In the latter case an RCU grace period will pass by the time RTNL is released. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:l3mdev_fib_table_rcu (net/l3mdev/l3mdev.c:181) [...] Call Trace: <TASK> l3mdev_fib_table_by_index (net/l3mdev/l3mdev.c:201 net/l3mdev/l3mdev.c:189) __inet_bind (net/ipv4/af_inet.c:499 (discriminator 3)) inet_bind_sk (net/ipv4/af_inet.c:469) __sys_bind (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:1951 (discriminator 1)) __x64_sys_bind (net/socket.c:1969 (discriminator 1) net/socket.c:1967 (discriminator 1) net/socket.c:1967 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) | ||||
| CVE-2026-46245 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dc_link NULL handling in HPD init amdgpu_dm_hpd_init() may see connectors without a valid dc_link. The code already checks dc_link for the polling decision, but later unconditionally dereferences it when setting up HPD interrupts. Assign dc_link early and skip connectors where it is NULL. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c:940 amdgpu_dm_hpd_init() error: we previously assumed 'dc_link' could be null (see line 931) drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c 923 /* 924 * Analog connectors may be hot-plugged unlike other connector 925 * types that don't support HPD. Only poll analog connectors. 926 */ 927 use_polling |= 928 amdgpu_dm_connector->dc_link && ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The patch adds this NULL check but hopefully it can be removed 929 dc_connector_supports_analog(amdgpu_dm_connector->dc_link->link_id.id); 930 931 dc_link = amdgpu_dm_connector->dc_link; dc_link assigned here. 932 933 /* 934 * Get a base driver irq reference for hpd ints for the lifetime 935 * of dm. Note that only hpd interrupt types are registered with 936 * base driver; hpd_rx types aren't. IOW, amdgpu_irq_get/put on 937 * hpd_rx isn't available. DM currently controls hpd_rx 938 * explicitly with dc_interrupt_set() 939 */ --> 940 if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) { ^^^^^^^^^^^^^^^^^^^^^^^ If it's NULL then we are trouble because we dereference it here. 941 irq_type = dc_link->irq_source_hpd - DC_IRQ_SOURCE_HPD1; 942 /* 943 * TODO: There's a mismatch between mode_info.num_hpd 944 * and what bios reports as the # of connectors with hpd | ||||
| CVE-2026-46235 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: saa7164: add ioremap return checks and cleanups Add checks for ioremap return values in saa7164_dev_setup(). If ioremap for BAR0 or BAR2 fails, release the already allocated PCI memory regions, remove the device from the global list, decrement the device count, and return -ENODEV. This prevents potential null pointer dereferences and ensures proper cleanup on memory mapping failures. | ||||
| CVE-2026-46216 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/hdcp: Add NULL check for media_gt in intel_hdcp_gsc_check_status() When media GT is disabled via configfs, there is no allocation for media_gt, which is kept as NULL. In such scenario, intel_hdcp_gsc_check_status() results in a kernel pagefault error due to >->uc.gsc being evaluated as an invalid memory address. Fix that by introducing a NULL check on media_gt and bailing out early if so. While at it, also drop the NULL check for gsc, since it can't be NULL if media_gt is not NULL. v2: - Get address for gsc only after checking that gt is not NULL. (Shuicheng) - Drop the NULL check for gsc. (Shuicheng) v3: - Add "Fixes" and "Cc: <stable...>" tags. (Matt) (cherry picked from commit bfaf87e84ca3ca3f6e275f9ae56da47a8b55ffd1) | ||||
| CVE-2026-46188 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: octeon_ep_vf: add NULL check for napi_build_skb() napi_build_skb() can return NULL on allocation failure. In __octep_vf_oq_process_rx(), the result is used directly without a NULL check in both the single-buffer and multi-fragment paths, leading to a NULL pointer dereference. Add NULL checks after both napi_build_skb() calls, properly advancing descriptors and consuming remaining fragments on failure. | ||||
| CVE-2026-46127 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/ocrdma: Don't NULL deref uctx on errors in ocrdma_copy_pd_uresp() Sashiko points out that pd->uctx isn't initialized until late in the function so all these error flow references are NULL and will crash. Use the uctx that isn't NULL. | ||||
| CVE-2026-46092 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: check for PCI upstream bridge existence pci_upstream_bridge() returns NULL if the device is on a root bus. If 8821CE is installed in the system with such a PCI topology, the probing routine will crash. This has probably been unnoticed as 8821CE is mostly supplied in laptops where there is a PCI-to-PCI bridge located upstream from the device. However the card might be installed on a system with different configuration. Check if the bridge does exist for the specific workaround to be applied. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool. | ||||
| CVE-2026-46086 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: use a stable FDB dst snapshot in RCU readers Local FDB entries can be rewritten in place by `fdb_delete_local()`, which updates `f->dst` to another port or to `NULL` while keeping the entry alive. Several bridge RCU readers inspect `f->dst`, including `br_fdb_fillbuf()` through the `brforward_read()` sysfs path. These readers currently load `f->dst` multiple times and can therefore observe inconsistent values across the check and later dereference. In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change `f->dst` after the NULL check and before the `port_no` dereference, leading to a NULL-ptr-deref. Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each affected RCU reader and using that snapshot for the rest of the access sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()` with `WRITE_ONCE()` so the readers and writer use matching access patterns. | ||||
| CVE-2026-46079 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rbd: fix null-ptr-deref when device_add_disk() fails do_rbd_add() publishes the device with device_add() before calling device_add_disk(). If device_add_disk() fails after device_add() succeeds, the error path calls rbd_free_disk() directly and then later falls through to rbd_dev_device_release(), which calls rbd_free_disk() again. This double teardown can leave blk-mq cleanup operating on invalid state and trigger a null-ptr-deref in __blk_mq_free_map_and_rqs(), reached from blk_mq_free_tag_set(). Fix this by following the normal remove ordering: call device_del() before rbd_dev_device_release() when device_add_disk() fails after device_add(). That keeps the teardown sequence consistent and avoids re-entering disk cleanup through the wrong path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. We reproduced the bug on v7.0 with a real Ceph backend and a QEMU x86_64 guest booted with KASAN and CONFIG_FAILSLAB enabled. The reproducer confines failslab injections to the __add_disk() range and injects fail-nth while mapping an RBD image through /sys/bus/rbd/add_single_major. On the unpatched kernel, fail-nth=4 reliably triggered the fault: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 UID: 0 PID: 273 Comm: bash Not tainted 7.0.0-01247-gd60bc1401583 #6 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__blk_mq_free_map_and_rqs+0x8c/0x240 Code: 00 00 48 8b 6b 60 41 89 f4 49 c1 e4 03 4c 01 e5 45 85 ed 0f 85 0a 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 e9 48 c1 e9 03 <80> 3c 01 00 0f 85 31 01 00 00 4c 8b 6d 00 4d 85 ed 0f 84 e2 00 00 RSP: 0018:ff1100000ab0fac8 EFLAGS: 00000246 RAX: dffffc0000000000 RBX: ff1100000c4806a0 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: ff1100000c4806f4 RBP: 0000000000000000 R08: 0000000000000001 R09: ffe21c000189001b R10: ff1100000c4800df R11: ff1100006cf37be0 R12: 0000000000000000 R13: 0000000000000000 R14: ff1100000c480700 R15: ff1100000c480004 FS: 00007f0fbe8fe740(0000) GS:ff110000e5851000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe53473b2e0 CR3: 0000000012eef000 CR4: 00000000007516f0 PKRU: 55555554 Call Trace: <TASK> blk_mq_free_tag_set+0x77/0x460 do_rbd_add+0x1446/0x2b80 ? __pfx_do_rbd_add+0x10/0x10 ? lock_acquire+0x18c/0x300 ? find_held_lock+0x2b/0x80 ? sysfs_file_kobj+0xb6/0x1b0 ? __pfx_sysfs_kf_write+0x10/0x10 kernfs_fop_write_iter+0x2f4/0x4a0 vfs_write+0x98e/0x1000 ? expand_files+0x51f/0x850 ? __pfx_vfs_write+0x10/0x10 ksys_write+0xf2/0x1d0 ? __pfx_ksys_write+0x10/0x10 do_syscall_64+0x115/0x690 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0fbea15907 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffe22346ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000058 RCX: 00007f0fbea15907 RDX: 0000000000000058 RSI: 0000563ace6c0ef0 RDI: 0000000000000001 RBP: 0000563ace6c0ef0 R08: 0000563ace6c0ef0 R09: 6b6435726d694141 R10: 5250337279762f78 R11: 0000000000000246 R12: 0000000000000058 R13: 00007f0fbeb1c780 R14: ff1100000c480700 R15: ff1100000c480004 </TASK> With this fix applied, rerunning the reproducer over fail-nth=1..256 yields no KASAN reports. [ idryomov: rename err_out_device_del -> err_out_device ] | ||||
| CVE-2026-45982 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix NULL pointer dereference in acpi_ev_address_space_dispatch() Cover a missed execution path with a new check. | ||||
| CVE-2026-45968 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpuidle: Skip governor when only one idle state is available On certain platforms (PowerNV systems without a power-mgt DT node), cpuidle may register only a single idle state. In cases where that single state is a polling state (state 0), the ladder governor may incorrectly treat state 1 as the first usable state and pass an out-of-bounds index. This can lead to a NULL enter callback being invoked, ultimately resulting in a system crash. [ 13.342636] cpuidle-powernv : Only Snooze is available [ 13.351854] Faulting instruction address: 0x00000000 [ 13.376489] NIP [0000000000000000] 0x0 [ 13.378351] LR [c000000001e01974] cpuidle_enter_state+0x2c4/0x668 Fix this by adding a bail-out in cpuidle_select() that returns state 0 directly when state_count <= 1, bypassing the governor and keeping the tick running. | ||||