| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.15.0, a crafted PDF can cause long runtimes and large memory consumption when pypdf/_font.py function Font._collect_cid_character_widths expands unusually large CID font /W width ranges or excessive width entries during text extraction. This issue is fixed in 6.15.0. |
| pypdf is a free and open-source pure-python PDF library. An attacker who uses a vulnerability present in versions prior to 6.10.2 can craft a PDF which leads to long runtimes. This requires loading a PDF with a large trailer `/Size` value in incremental mode. This has been fixed in pypdf 6.10.2. As a workaround, one may apply the changes from the patch manually. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.7.2, an attacker who uses this vulnerability can craft a PDF which leads to an infinite loop. This requires reading the file. This has been fixed in pypdf 6.7.2. As a workaround, one may apply the patch manually. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libsas: Fix SMP IO deadlock during HA resume
smp_execute_task_sg() calls pm_runtime_get_sync() on the host before
issuing an SMP command. When that command is itself issued from the HA
resume path, the get_sync() deadlocks: it waits for the ongoing resume
(the device is RPM_RESUMING), while the resume is blocked in
sas_drain_work() waiting for that same SMP IO to complete.
The deadlock needs an expander-attached SATA disk. During
sas_resume_ha() -> sas_drain_work(), DISCE_RESUME -> sas_resume_sata()
-> ata_sas_port_resume() requests ATA_EH_RESET, and the hard reset for
such a disk is done via SMP PHY CONTROL (sas_ata_hard_reset() ->
sas_phy_reset() -> sas_smp_phy_control() ->
smp_execute_task_sg()). Direct-attached SATA resets through
lldd_control_phy() and SSP devices use TMFs, so neither hits this.
Replace the get_sync()/put_sync() pair with
pm_runtime_get_noresume()/pm_runtime_put(). smp_execute_task_sg() only
needs to hold off autosuspend while the SMP is in flight, and it must
not try to resume the host: a sync resume issued from the HA resume path
itself is what deadlocks, and by the time sas_resume_ha() runs, hw_init
has already reinitialized the hardware, so the device is accessible
without one.
The usage reference is still required. Discovery work normally runs
inside an event worker's PM reference, taken at sas_notify_port_event()
notify time and held until the handler has flushed the disco
queue. sas_rediscover_ex_phy() however requeues DISCE_REVALIDATE_DOMAIN
from within the revalidation worker itself, and flush_workqueue() does
not wait for work items queued during execution, so that chained
revalidation runs with no outer PM reference - without the
get_noresume(), its SMP could race autosuspend.
For the BSG path, sas_smp_handler() is the only caller which may find
the host autosuspended: expander SMP requests do not go through any SCSI
device request queue, so nothing else in that path holds the host
awake. Resume it there with pm_runtime_resume_and_get() and check the
result. |
| A flaw in the client-side encryption support of the MongoDB .NET/C# driver can cause data designated for client-side field-level encryption to be written without encryption. Under certain platform text-encoding configurations, an internal name conversion loses information, so the encryption layer fails to associate the operation with its configured encryption rules and the operation proceeds without an error being raised. An application user with the ability to write data through an affected application can therefore have sensitive fields persisted in plaintext, defeating the confidentiality guarantee that client-side encryption is intended to provide. No integrity or availability impact was observed. |
| A flaw was found in libkcapi. A local attacker can influence an application that uses the Asynchronous Input/Output (AIO) interface. By reusing an AIO-enabled handle after a prior completion error, the _kcapi_aio_read_all() function can enter a non-terminating wait loop. This can lead to a persistent denial of service, making the affected application or thread unresponsive. |
| Seroval facilitates JavaScript value stringification, including complex structures beyond JSON.stringify capabilities. Prior to 1.6.8, fromJSON and fromCrossJSON do not validate a sequence node's done index. A crafted done index can create an iterator that never finishes when application code consumes it to completion. An unauthenticated request to a service that deserializes untrusted input can therefore block the event loop, exhaust process memory, or make the service unavailable. This issue is fixed in version 1.6.8. |
| GFI KerioConnect (Kerio Connect) before 10.0.8 Patch 2 contains a stored cross-site scripting vulnerability in the Webmail component that allows a remote attacker to run JavaScript in a victim's authenticated Webmail session by uploading a crafted SVG email attachment that bypasses sanitization of event-handler attributes. Attackers can exploit the temporary-download endpoint's insufficient Content-Security-Policy sandbox to execute scripts when the attachment is opened, enabling theft of the victim's credentials and mailbox contents. Proofpoint Threat Research has observed exploitation in the wild as a credential and mailbox stealer. |
| LibreDWG is a free C library to read and write DWG files. Prior to 0.14.8413, a crafted pre-R13 DWG can make `decode_preR13_entities()` in `src/decode.c` enter a nonterminating loop that allocates a new object each iteration. `decode_preR13` in `src/decode_r11.c` computes `size` from the raw file-controlled `entities_start` and `entities_end` header bounds; the callee clamps `end` to `dat->size` but never recalculates `size`. At `end` of input, `bit_read_RC` and `bit_read_RS` stop advancing `dat->byte`, the overflow guard fails because `end` equals `dat->size`, and the no-advance check compares against `oldpos` saved before the loop instead of the previous iteration. This leaves repeated allocation of `dwg->object` entries until allocation fails or the process is OOM-killed, not merely a constant-memory CPU hang. The defect remains after the clamping and no-progress changes associated with the earlier issue 1131. Applications and tools calling `dwg_read_file()` on untrusted files, including `dwg2dxf`, `dwgread` and `dwg2svg`, can suffer denial of service when a user or automated pipeline opens a malformed file; no attacker credentials are required. This issue is fixed in repository nightly version 0.14.8413. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible infinite loop in fib6_select_path()
Found while auditing the same pattern Sashiko reported in
rt6_fill_node() [1]. Apply the same fix as
commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings)
without waiting for RCU readers; first->fib6_siblings.next then
still points into the old ring and this softirq-side walker never
reaches &first->fib6_siblings as its terminator. fib6_purge_rt()
always WRITE_ONCE()s first->fib6_nsiblings to 0 before
list_del_rcu(), so an inside-loop check is a reliable detach signal.
[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the affected implementation used BigInteger.prototype.modInverse(), bnModInverse(), lib/jsbn.js, RSA public exponent e to process the relevant input or security decision. node-forge's bundled jsbn implementation entered an infinite loop when BigInteger.prototype.modInverse() received a negative value or modulus. An attacker who could control the RSA public exponent passed to key generation, or a direct modInverse() operand, could block the Node.js event loop at full CPU. Parsed DER, PEM, JWK, PKCS#12, X.509, and TLS values are unsigned and cannot trigger this issue. This issue is fixed in version 1.4.1. |
| Pillow is a Python imaging library. Prior to 13.0.0, the TarIO initializer in src/PIL/TarIO.py accepts a negative octal member size and computes a backward seek that returns to the same 512-byte header. When the requested member name does not match, the parser repeatedly reads that header, consumes a full CPU core, and never returns. TarIO is reached only when an application directly uses PIL.TarIO.TarIO rather than the default Image.open() path. This issue is fixed in version 13.0.0. |
| vLLM is an inference and serving engine for large language models. From 0.19.0 until 0.32.0, authenticated callers can supply a request chat template when no server-side --chat-template is configured, or a malicious model repository can provide a template that is compiled and rendered by tokenizer.apply_chat_template() without a wall-clock timeout, output-size limit, or iteration bound. Rendering runs in a ThreadPoolExecutor with one worker by default, so a nonterminating render can block /v1/responses and other chat-template users after the request ends, while an output-expanding render can exhaust server memory. Harmony models are not affected because they do not use this Jinja path. This issue is fixed in version 0.32.0. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem
When a configuration file provides an object size that is larger than the
driver's known mxt_obj_size(object), the driver intends to discard the
extra bytes.
The loop iterates using for (i = 0; i < size; i++). Inside the loop, the
condition to skip processing extra bytes is:
if (i > mxt_obj_size(object))
continue;
Since i is a 0-based index, the valid indices for the object are 0 through
mxt_obj_size(object) - 1.
When i == mxt_obj_size(object), the condition evaluates to false, and the
code processes the byte instead of discarding it.
This causes the code to calculate byte_offset = reg + i - cfg->start_ofs
and writes the byte there, overwriting exactly one byte of the adjacent
instance or object.
Update the boundary check to skip extra bytes correctly by using >=. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix infinite loop on discard with large tag size
When integrity_metadata handles a discard, it fills a buffer with
DISCARD_FILLER and writes it over the tags, max_blocks blocks at a
time. If the kmalloc fails, the buffer is the on-stack array
checksums_onstack and max_size is set to HASH_MAX_DIGESTSIZE. So if the
tag size is larger than HASH_MAX_DIGESTSIZE, max_blocks is zero, bi_size
is never decremented and the loop never terminates.
Fix this by using sizeof(checksums_onstack) as max_size. The array has
MAX_TAG_SIZE bytes since commit b93b6643e9b5 ("dm integrity: fix a
crash with unusually large tag size"), so max_blocks is at least 1. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't hold buffer locks across sync transaction commit in xfs_sync_sb_buf
xfs_sync_sb_buf() holds sb/rtsb buffer locks across a synchronous
xfs_trans_commit(), which flushes the CIL push workqueue internally.
If shutdown occurs during the CIL push, xfs_buf_item_unpin() needs to
lock these buffers to fail them, causing a deadlock:
setlabel: holds buf lock -> flush_workqueue(xfs-cil)
CIL push worker: xfs_buf_item_unpin -> xfs_buf_lock(same buf)
Remove the xfs_trans_bhold() calls so that commit releases the buffer
locks normally. After the sync commit, re-acquire the buffers via
mp->m_sb_bp / mp->m_rtsb_bp for the on-disk writeback. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/cancel: don't spin on local work the task can't run
io_uring_cancel_generic() refuses to sleep while any ring on the exiting
task's tctx has local work pending. It assumes the task is that ring's
submitter and that the next io_uring_try_cancel_requests() pass will run
the work. This does not hold for a ring that was still
IORING_SETUP_R_DISABLED when the task got its tctx node from
io_uring_create() or io_ringfd_register(). The submitter is set later by
IORING_REGISTER_ENABLE_RINGS, possibly from another task, and only the
submitter may run local work on an IORING_SETUP_DEFER_TASKRUN ring. To
the exiting task the work stays pending forever, the loop never reaches
schedule(), and the task trips the WARN_ON_ONCE() once and then spins in
do_exit().
An unprivileged user can set this up at will by creating a disabled
ring, having a child enable it and stop, posting to the ring with
IORING_OP_MSG_RING and exiting with a request in flight that only the
child can complete. The exiting thread burns a CPU until the child runs
or dies, and with panic_on_warn set the WARN panics the kernel.
Fix by skipping the sleep only when io_allowed_defer_tw_run() allows the
task to run the work. This is reasonable since work it cannot run cannot
complete any of its requests either, so nothing is lost by sleeping.
Drop the WARN_ON_ONCE() since handing a disabled ring to another thread
is a supported scenario, not a bug state. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate chunk length in the inqueue parser
SCTP chunks always include a four-byte generic header, but
sctp_inq_pop() currently accepts shorter declared lengths. A zero-length
chunk leaves chunk_end at the current header.
When ASCONF is covered by the association's SCTP-AUTH policy,
sctp_assoc_bh_rcv() can continue before the state machine performs its
normal chunk-length check. sctp_inq_pop() then returns the same malformed
chunk repeatedly and the receive softirq can lock up.
A remote SCTP peer can trigger this after establishing an association on
a kernel built with CONFIG_IP_SCTP and configured with
net.sctp.addip_enable=1 and net.sctp.auth_enable=1. The reproducer did
not require application credentials, a shared SCTP AUTH key, or
net.sctp.addip_noauth_enable=1.
On commit f967455fb2a5 ("seg6: reset IP6CB after IPv6 decapsulation"),
one zero-length ASCONF caused repeated
watchdog soft-lockup reports in a two-vCPU KVM guest. All 3 pre-trigger
health probes succeeded, while 36 of 37 post-trigger probes failed. With
this change, all 37 post-trigger probes succeeded and no equivalent
soft-lockup signature appeared.
Reject chunks shorter than the generic SCTP header at the shared inqueue
parser boundary. Mark the packet for discard before either caller can
continue processing it, while preserving the four-byte generic minimum.
Declared-length 1 through 4 controls and kernel-generated ASCONF traffic
remained healthy. The patched sctp_hello selftest passed for IPv4 and
IPv6.
The complete private reproducer and validation evidence are available
directly to maintainers on request. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: fix soft lockup in the netlink flow dump
A production compute node carrying a few thousand datapath flows hit a
soft lockup inside a single netlink flow dump and panicked.
ovs_flow_cmd_dump() calls ovs_flow_stats_get() for every flow it
emits, and that releases stats->lock with spin_unlock_bh() once per
CPU that has touched the flow. Every release is a local_bh_enable(),
and each one runs the pending softirq backlog in the dumping thread's
own context.
The skb bounds the flows one callback emits, but not the softirq work
it absorbs. On a CPU that carries the box's packet load the backlog
refills as fast as it drains, so the dumping thread becomes that CPU's
softirq engine. It never sleeps and it has no reschedule point, so
under voluntary preemption nothing can take the CPU away from it:
neither the ksoftirqd the kernel woke to take the work over, nor the
stopper thread the softlockup detector dispatches to refresh its
timestamp.
Hold BH off across the whole callback instead, the way
ctnetlink_dump_table() does, so the nested spin_unlock_bh() stop
draining softirqs. The loop already runs under rcu_read_lock() and
cannot sleep. What it gives up is preemption under CONFIG_PREEMPT,
since a BH-off region is not preemptible outside PREEMPT_RT. The
region stays short: the skb caps the flows one callback emits, and
empty buckets cost no skb space but are each visited once per dump, as
the cursor only moves forward. The table grows on insert and shrinks
only on flush, so the walk is bounded by the largest flow count the
datapath has held. The softirq backlog the callback used to absorb has
no bound at all. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: connect the session socket without rfcomm_mutex
An RFCOMM connect() issued while a BR/EDR link is being authenticated
makes lockdep report a circular dependency, and the reported cycle is a
real AB/BA between rfcomm_mutex and hdev->lock.
rfcomm_security_cfm() is called from the HCI event path, which already
holds hdev->lock:
hci_rx_work()
hci_event_packet()
hci_cc_read_enc_key_size() [hdev->lock]
hci_encrypt_cfm() [hci_cb_list_lock]
rfcomm_security_cfm() [rfcomm_mutex]
while an RFCOMM connect() from userspace takes the same two locks the
other way round:
rfcomm_sock_connect()
rfcomm_dlc_open() [rfcomm_mutex]
__rfcomm_dlc_open()
rfcomm_session_create()
kernel_connect()
l2cap_sock_connect()
l2cap_chan_connect() [hdev->lock]
WARNING: possible circular locking dependency detected
kworker/u131:1/1128 is trying to acquire lock:
rfcomm_mutex, at: rfcomm_security_cfm+0x31/0x3e0 [rfcomm]
but task is already holding lock:
hci_cb_list_lock, at: hci_cc_read_enc_key_size+0x1d2/0xcc0
Chain exists of:
rfcomm_mutex --> &hdev->lock --> hci_cb_list_lock
hci_auth_complete_evt() and hci_encrypt_change_evt() reach the callback
the same way.
Both orders have to be seen in the same boot, which is why a BR/EDR
connection alone is not enough to show it: a session set up by the
remote side is created by rfcomm_accept_connection() in krfcommd, which
calls kernel_accept() and never takes hdev->lock under rfcomm_mutex.
Connecting a device that authenticates and encrypts the link and then
calling connect() on an RFCOMM socket towards any address - the connect
does not have to succeed, the order is recorded before the page timeout
- reports it every time.
Only the session socket has to be connected with the lock held, and it
does not: nothing else can see the socket before it is put on the
session list. So connect it first and take rfcomm_mutex afterwards,
which removes the rfcomm_mutex -> hdev->lock order for good, rather
than keeping the HCI event path out of rfcomm_mutex.
rfcomm_session_create() becomes rfcomm_session_connect(), which returns
the connected socket without touching the session list, and
rfcomm_dlc_open() adds the session once it holds the lock again. If
another opener added a session for the same pair while this socket was
connecting, that session is used and this socket is dropped.
__rfcomm_dlc_open() now takes the session it should use, and its state
check runs after the lock is re-acquired, so a DLC that was opened or
closed in the meantime is still handled.
Over an existing ACL link the connection can complete before the
session reaches the list, and the wakeup from the socket callback is
then lost, so krfcommd is woken once the session is visible.
Connecting without the lock opens a window in which the socket can be
closed. The DLC is not on a session yet, so rfcomm_dlc_close() finds
nothing to do and returns without touching it, and rfcomm_dlc_open()
would then attach a DLC whose owner is gone. rfcomm_dlc_close() now
marks such a DLC with RFCOMM_CLOSED, and rfcomm_dlc_open() checks the
mark once it holds rfcomm_mutex again and drops the socket instead of
attaching the DLC. The mark is cleared when an open starts, so a DLC
that is reused is not affected. This covers both callers of
rfcomm_dlc_open(), the socket and the tty layer. |
