| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Heap-based buffer overflow in Microsoft WDAC OLE DB provider for SQL allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft WDAC OLE DB provider for SQL allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix fiemap wild read on empty truncated response
smb3_fiemap() treats -E2BIG from SMB2_ioctl() as a truncated range blob
and loops for the next chunk. If the server reports
STATUS_BUFFER_OVERFLOW with OutputCount == 0, SMB2_ioctl() returns
-E2BIG with out_data == NULL and out_data_len == 0, and the existing
length checks accept the empty result. The loop then evaluates
next = out_data[num - 1].file_offset + ...
with num == 0, reading 16 bytes before NULL.
Reject a truncated range blob that contains no range, so the resume
offset is never computed from an empty response. Also require the last
range in a truncated blob to advance the resume offset without
overflowing, and to stay within the requested range; a malicious or
broken server could otherwise make no progress or underflow len and loop
forever. Free the previous response buffer before retrying.
Reproduced on 6.6.87.2 with a malicious SMB2 server that answers
FSCTL_QUERY_ALLOCATED_RANGES with STATUS_BUFFER_OVERFLOW and
OutputCount == 0; an FS_IOC_FIEMAP ioctl on the mount oopses in
cifs_fiemap() with CR2 = fffffffffffffff8. The code path is unchanged
on mainline. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reserve space for the UTF-16 terminator in stream info
smb_strtoUTF16() always writes a terminating zero UTF-16 unit after the
converted characters, but get_file_stream_info() budgets only
sizeof(struct smb2_file_stream_info) + streamlen * 2 for a stream entry
and sizeof(struct smb2_file_stream_info) + 7 * 2 for the trailing
"::$DATA" entry. When an entry exactly fills the 448-byte small response
buffer, the terminator is written two bytes past the allocation.
Reserve one extra UTF-16 unit in both budget checks. The terminator is
not part of the wire format, so the reported lengths are unchanged. |
| Authentication bypass by capture-replay in SQL Server allows an unauthorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: line6: Clear prev_fbuf on capture buffer release
A KASAN slab-use-after-free read was reported in submit_audio_out_urb()
when generating an impulse test signal:
BUG: KASAN: slab-use-after-free in create_impulse_test_signal sound/usb/line6/playback.c:76 [inline]
BUG: KASAN: slab-use-after-free in submit_audio_out_urb+0x1848/0x1b20 sound/usb/line6/playback.c:249
Read of size 2 at addr ffff888008d74870 by task syz.2.3214/7785
Allocated by task 11:
kmem_cache_alloc_noprof+0x2f0/0x390 mm/slub.c:4144
line6_buffer_acquire+0x1a1/0x220 sound/usb/line6/pcm.c:158
line6_pcm_acquire+0xb6/0x230 sound/usb/line6/pcm.c:329
line6_startup_work+0x3c/0x50 sound/usb/line6/driver.c:728
Freed by task 7785:
kfree+0xf8/0x390 mm/slub.c:6566
line6_buffer_release sound/usb/line6/pcm.c:176 [inline]
line6_buffer_release+0xa5/0xf0 sound/usb/line6/pcm.c:170
__line6_pcm_release sound/usb/line6/pcm.c:305 [inline]
line6_pcm_release+0x5a/0x80 sound/usb/line6/pcm.c:313
snd_toneport_monitor_put+0x11b/0x190 sound/usb/line6/toneport.c:183
line6pcm->prev_fbuf points into the capture PCM stream buffer
(line6pcm->in.buffer), which is updated during audio_in_callback() to
feed rate synchronization, software monitoring, and impulse test signal
generation on playback side.
When all capture streams are closed, line6_buffer_release() frees
pstr->buffer with kfree(). However, it does not clear line6pcm->prev_fbuf.
If playback is subsequently started (e.g. via impulse test signal
volume control snd_line6_impulse_volume_put()), submit_audio_out_urb()
dereferences the stale pointer line6pcm->prev_fbuf under in.lock,
resulting in a slab-use-after-free read.
Clear prev_fbuf and prev_fsize in line6_buffer_release() when releasing
the capture stream buffer under in.lock, ensuring that no stale buffer
pointer can be accessed by submit_audio_out_urb(). |
| Time-of-check time-of-use (toctou) race condition in Windows NTFS allows an authorized attacker to perform tampering locally. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Fix potential UAF in reqsk_timer_handler().
When TCP socket migration fails at inet_ehash_insert() in
reqsk_timer_handler(), we jump to the no_ownership: label
and free the new reqsk immediately with __reqsk_free().
Thus, we must stop the new reqsk's timer before jumping to the
label, but the timer might be missed since the cited commit,
resulting in UAF.
As we are in the original reqsk's timer context, we can safely
call timer_delete_sync() for the new reqsk.
Let's pass false to __inet_csk_reqsk_queue_drop() to stop
the new reqsk's timer. |
| An elevation of privilege vulnerability exists when reparse points are created by sandboxed processes allowing sandbox escape. An attacker who successfully exploited the vulnerability could use the sandbox escape to elevate privileges on an affected system.
To exploit the vulnerability, an attacker would first have to log on to the system, and then run a specially crafted application to take control over the affected system.
The security update addresses the vulnerability by preventing sandboxed processes from creating reparse points targeting inaccessible files. |
| In the Linux kernel, the following vulnerability has been resolved:
ipc: drop the mqueue mount with kern_unmount() on setup failure
mq_init_ns() creates the mqueue mount with fc_mount_longterm(), so its
->mnt_ns is MNT_NS_INTERNAL. When setting up the mqueue or ipc sysctls
or msg_init_ns() fails afterwards, create_ipc_ns() drops it with a plain
mntput(). With ->mnt_ns set that takes the fast path of
mntput_no_expire(). The count drops to zero and nothing ever kills the
mount, so the mount and the mqueue superblock are leaked.
Commit dc55e35f9e81 ("ipc: Store mqueue sysctls in the ipc namespace")
added the first failure path after mq_init_ns() and never dropped the
mount. Commit 7229d74e5e8c ("ipc: create_ipc_ns: drop mqueue mount on
sysctl setup failure") tried to fix that with a mntput() but that
doesn't help for a long-term mount.
Use kern_unmount(). free_ipc() open-codes the same thing for a namespace
that made it. |
| Buffer over-read in Windows iSCSI Target Service allows an unauthorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dmc: Add sanity check for DMC load address
For DMC firmware header version 3, the firmware load address is stored
in dmc_info->start_mmioaddr and later used by dmc_load_program().
Unlike the MMIO address table, the firmware load address is not
validated. Add a sanity check to ensure it is within the valid range.
BSpec: 69671, 68378
(cherry picked from commit 5e47ee5c76ca9becde8df4ad5202845b7ffcbc4c) |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: validate packet source for connected sockets
vmci_transport_recv_stream_cb() looks up sockets first by the full source
and destination tuple, then by destination only in the bound table. The
fallback can select a non-listening socket without checking whether the
packet came from its stored peer.
This was reproduced with two VMCI contexts. A RST from the context not
stored in a TCP_SYN_SENT socket reset that socket after it was selected by
the destination-only lookup.
VMCI can process notification packets in bottom-half context when the
socket is not owned by user context, or defer packets to a workqueue. Use
vsock_check_source() after taking the socket lock in the bottom-half path,
and recheck after lock_sock() in the workqueue path. Listening sockets
continue to accept packets from any source.
Reply with a RST addressed from the received packet before dropping a
source that fails validation. This preserves the existing reset behavior
for bound non-listening and concurrently closed sockets without directing
the reset to a connected socket's stored peer. |
| Use after free in Windows Local Security Authority Subsystem Service (LSASS) allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in SQL Server allows an authorized attacker to elevate privileges over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject SetEA requests that do not fit the request buffer
CIFSSMBSetEA() copies the caller's extended attribute value into the
SMB request buffer without checking that it fits. The requirement is
stated in the source but was never implemented:
/*BB add length check to see if it would fit in
negotiated SMB buffer size BB */
/* if (ea_value_len > buffer_size - 512 (enough for header)) */
if (ea_value_len)
memcpy(parm_data->list.name + name_len + 1,
ea_value, ea_value_len);
The only bound applied on the way in is in cifs_xattr_set():
#define MAX_EA_VALUE_SIZE CIFSMaxBufSize
...
if (size > MAX_EA_VALUE_SIZE)
CIFSMaxBufSize is the full payload capacity of the buffer, so a value
of exactly that size leaves no room for the SMB header, the TRANS2
parameter block, the fealist header and the EA name that are written
ahead of it in the same object.
SendReceive() already enforces the correct limit on this very length:
if (in_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE)
but it is called after the copy has taken place. An unprivileged
setxattr(2) on an SMB1 mount with a 250-byte name and a 16384-byte
value writes 16384 bytes starting 345 bytes into a 16588-byte
cifs_request object, ending 141 bytes past it:
BUG: KASAN: slab-out-of-bounds in CIFSSMBSetEA+0xabc/0xde0
Write of size 16384 at addr ffff888003aa0159 by task init/68
__asan_memcpy+0x3c/0x60
CIFSSMBSetEA+0xabc/0xde0
cifs_xattr_set+0xd3a/0xff0
__vfs_setxattr+0x13e/0x1a0
The buggy address is located 345 bytes inside of
allocated 16588-byte region
Apply SendReceive()'s limit to the assembled request before the copy
rather than after it, and widen the byte counters so the sum cannot
wrap before it is tested.
byte_count is also tested against U16_MAX, because it is stored in the
16-bit pSMB->ByteCount. That becomes reachable when CIFSMaxBufSize is
raised at module load, where it may be set as high as 1024*127: with a
5-byte EA name and a 65521-byte value, count is exactly U16_MAX while
byte_count is 65556, and cpu_to_le16() would truncate it to 20 and
transmit a frame whose ByteCount does not match its length. Testing
byte_count covers count as well, since byte_count is the larger of the
two and count's only 16-bit consumer is written after this point.
check_add_overflow() is evaluated first so that total_len is assigned
before it is reported. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix NULL pointer dereference when the 'R' flag is used
If the dm-integrity device has the SB_FLAG_DIRTY_BITMAP flag set and the
user activates the device in the 'R' mode, a crash in dm_integrity_resume
happens because the function attempts to read the journal containing the
bitmap.
This patch makes dm-integrity skip any writes to the device in
dm_integrity_resume if the device is activated in the 'R' mode. |
| Heap-based buffer overflow in SQL Server allows an authorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: validate the superblock on resume
dm_integrity_resume() re-reads the superblock from the device so that it
picks up the flags and the recalculate position. It performs no
validation on the result, while the constructor validates the superblock
it reads and sizes all the in-memory structures according to it. The user
may modify the superblock on the underlying device while the dm-integrity
device is suspended, so that the two no longer agree.
In particular, access_journal_data() shifts the journal entry index by
ic->sb->log2_sectors_per_block, while ic->journal_section_sectors and the
journal page list were computed with the value that was present at
constructor time. Increasing log2_sectors_per_block makes the index run
past the end of the journal, and dm-integrity then writes 512 bytes
through lowmem_page_address(NULL).
Snapshot the validated superblock in the constructor and refuse to resume
if any of the fields that describe the on-disk geometry changed. |
| Inefficient algorithmic complexity in ASP.NET Core allows an unauthorized attacker to deny service over a network. |
