| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper input validation in the beacon handler for WF200 firmware versions 3.17.0 and earlier may result in a divide-by-zero fault. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_hfsc: fix divide-by-zero in rtsc_min()
m2sm() converts a u32 slope to a u64 scaled value. For large inputs
(e.g. m1=4000000000), the result can reach 2^32. rtsc_min() stores
the difference of two such u64 values in a u32 variable `dsm` and
uses it as a divisor. When the difference is exactly 2^32 the
truncation yields zero, causing a divide-by-zero oops in the
concave-curve intersection path:
Oops: divide error: 0000
RIP: 0010:rtsc_min (net/sched/sch_hfsc.c:601)
Call Trace:
init_ed (net/sched/sch_hfsc.c:629)
hfsc_enqueue (net/sched/sch_hfsc.c:1569)
[...]
Widen `dsm` to u64 and replace do_div() with div64_u64() so the full
difference is preserved. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: ets: fix divide by zero in the offload path
Offloading ETS requires computing each class' WRR weight: this is done by
averaging over the sums of quanta as 'q_sum' and 'q_psum'. Using unsigned
int, the same integer size as the individual DRR quanta, can overflow and
even cause division by zero, like it happened in the following splat:
Oops: divide error: 0000 [#1] SMP PTI
CPU: 13 UID: 0 PID: 487 Comm: tc Tainted: G E 6.19.0-virtme #45 PREEMPT(full)
Tainted: [E]=UNSIGNED_MODULE
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets]
Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44
RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246
RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660
RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe
R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000
FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0
Call Trace:
<TASK>
ets_qdisc_change+0x870/0xf40 [sch_ets]
qdisc_create+0x12b/0x540
tc_modify_qdisc+0x6d7/0xbd0
rtnetlink_rcv_msg+0x168/0x6b0
netlink_rcv_skb+0x5c/0x110
netlink_unicast+0x1d6/0x2b0
netlink_sendmsg+0x22e/0x470
____sys_sendmsg+0x38a/0x3c0
___sys_sendmsg+0x99/0xe0
__sys_sendmsg+0x8a/0xf0
do_syscall_64+0x111/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f440b81c77e
Code: 4d 89 d8 e8 d4 bc 00 00 4c 8b 5d f8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 11 c9 c3 0f 1f 80 00 00 00 00 48 8b 45 10 0f 05 <c9> c3 83 e2 39 83 fa 08 75 e7 e8 13 ff ff ff 0f 1f 00 f3 0f 1e fa
RSP: 002b:00007fff951e4c10 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000481820 RCX: 00007f440b81c77e
RDX: 0000000000000000 RSI: 00007fff951e4cd0 RDI: 0000000000000003
RBP: 00007fff951e4c20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff951f4fa8
R13: 00000000699ddede R14: 00007f440bb01000 R15: 0000000000486980
</TASK>
Modules linked in: sch_ets(E) netdevsim(E)
---[ end trace 0000000000000000 ]---
RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets]
Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44
RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246
RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660
RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe
R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000
FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x30000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception ]---
Fix this using 64-bit integers for 'q_sum' and 'q_psum'. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/reclaim: avoid divide-by-zero in damon_reclaim_apply_parameters()
When creating a new scheme of DAMON_RECLAIM, the calculation of
'min_age_region' uses 'aggr_interval' as the divisor, which may lead to
division-by-zero errors. Fix it by directly returning -EINVAL when such a
case occurs. |
| Blosc c-blosc2 before 3.5.0 contains a divide-by-zero vulnerability in blosc2_schunk_get_slice_buffer() in blosc/schunk.c that allows attackers to crash applications by supplying crafted frames with unchecked zero chunksize or blocksize values. Attackers can provide a malicious Blosc2 frame opened via blosc2_schunk_open() or blosc2_schunk_from_buffer() and read as a slice, raising SIGFPE and terminating the process. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: core: fbcvt: avoid division by 0 in fb_cvt_hperiod()
In fb_find_mode_cvt(), iff mode->refresh somehow happens to be 0x80000000,
cvt.f_refresh will become 0 when multiplying it by 2 due to overflow. It's
then passed to fb_cvt_hperiod(), where it's used as a divider -- division
by 0 will result in kernel oops. Add a sanity check for cvt.f_refresh to
avoid such overflow...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: make sure that ptp_rate is not 0 before configuring timestamping
The stmmac platform drivers that do not open-code the clk_ptp_rate value
after having retrieved the default one from the device-tree can end up
with 0 in clk_ptp_rate (as clk_get_rate can return 0). It will
eventually propagate up to PTP initialization when bringing up the
interface, leading to a divide by 0:
Division by zero in kernel.
CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.30-00001-g48313bd5768a #22
Hardware name: STM32 (Device Tree Support)
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x6c/0x8c
dump_stack_lvl from Ldiv0_64+0x8/0x18
Ldiv0_64 from stmmac_init_tstamp_counter+0x190/0x1a4
stmmac_init_tstamp_counter from stmmac_hw_setup+0xc1c/0x111c
stmmac_hw_setup from __stmmac_open+0x18c/0x434
__stmmac_open from stmmac_open+0x3c/0xbc
stmmac_open from __dev_open+0xf4/0x1ac
__dev_open from __dev_change_flags+0x1cc/0x224
__dev_change_flags from dev_change_flags+0x24/0x60
dev_change_flags from ip_auto_config+0x2e8/0x11a0
ip_auto_config from do_one_initcall+0x84/0x33c
do_one_initcall from kernel_init_freeable+0x1b8/0x214
kernel_init_freeable from kernel_init+0x24/0x140
kernel_init from ret_from_fork+0x14/0x28
Exception stack(0xe0815fb0 to 0xe0815ff8)
Prevent this division by 0 by adding an explicit check and error log
about the actual issue. While at it, remove the same check from
stmmac_ptp_register, which then becomes duplicate |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: make sure that ptp_rate is not 0 before configuring EST
If the ptp_rate recorded earlier in the driver happens to be 0, this
bogus value will propagate up to EST configuration, where it will
trigger a division by 0.
Prevent this division by 0 by adding the corresponding check and error
code. |
| In the Linux kernel, the following vulnerability has been resolved:
libnvdimm/labels: Fix divide error in nd_label_data_init()
If a faulty CXL memory device returns a broken zero LSA size in its
memory device information (Identify Memory Device (Opcode 4000h), CXL
spec. 3.1, 8.2.9.9.1.1), a divide error occurs in the libnvdimm
driver:
Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:nd_label_data_init+0x10e/0x800 [libnvdimm]
Code and flow:
1) CXL Command 4000h returns LSA size = 0
2) config_size is assigned to zero LSA size (CXL pmem driver):
drivers/cxl/pmem.c: .config_size = mds->lsa_size,
3) max_xfer is set to zero (nvdimm driver):
drivers/nvdimm/label.c: max_xfer = min_t(size_t, ndd->nsarea.max_xfer, config_size);
4) A subsequent DIV_ROUND_UP() causes a division by zero:
drivers/nvdimm/label.c: /* Make our initial read size a multiple of max_xfer size */
drivers/nvdimm/label.c: read_size = min(DIV_ROUND_UP(read_size, max_xfer) * max_xfer,
drivers/nvdimm/label.c- config_size);
Fix this by checking the config size parameter by extending an
existing check. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: Avoid divide by zero in table status in Inline mode
In Inline mode, the journal is unused, and journal_sectors is zero.
Calculating the journal watermark requires dividing by journal_sectors,
which should be done only if the journal is configured.
Otherwise, a simple table query (dmsetup table) can cause OOPS.
This bug did not show on some systems, perhaps only due to
compiler optimization.
On my 32-bit testing machine, this reliably crashes with the following:
: Oops: divide error: 0000 [#1] PREEMPT SMP
: CPU: 0 UID: 0 PID: 2450 Comm: dmsetup Not tainted 6.14.0-rc2+ #959
: EIP: dm_integrity_status+0x2f8/0xab0 [dm_integrity]
... |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: error damos_commit_quota_goal() for zero target_value
Patch series "mm/damon: move zero damos quota target_value handling to the
core layer".
Having zero DAMOS quota target value can cause division by zero. DAMON
API callers are checking the target value parameters to avoid that. It is
easy to make mistakes in some of the multiple API callers. Move that to
the core layer.
Patch 1 adds the corner case handling into the core layer DAMON parameters
validation logic. Patches 2 and 3 remove no more needed DAMON API callers
side handling of the corner case in DAMON_LRU_SORT and DMON_SAMPLIE_MTIER,
respectively.
This patch (of 3):
If a DAMOS scheme has a damos_quota_goal of zero target_value,
damos_quota_goal() could trigger division-by-zero error. Hence each DAMON
API callers should do the zero target_value validation. It is easy to
make mistakes. Actually such bugs in DAMON_LRU_SORT and
DAMON_SAMPLE_MTIER were found and fixed [1].
It is better to handle the corner case only once in the core layer,
instead of multiple places in all DAMON API callers. One straightforward
option is using an alternative denominator for the corner case in the
damos_quota_goal(). However, the zero target_value is meaningless. In
this case, the quota goal is always evaluated as achieved or
over-achieved. The quota will only keep being reduced.
Simply avoid using zero target_value by adding a check in the core layer
DAMOS quota goal parameters validation/commit path,
damos_commit_quota_goal(). Update it to return an error in the case.
Also update its caller to propagate the error. |
| FreeRDP before 3.32.2 contains a denial of service vulnerability in the RDPGFX ALPHA WIRETOSURFACE_2 handler that fails to validate zero surface dimensions. A malicious RDP server can send a crafted WIRETOSURFACE_2 PDU with zero width and height, triggering an assertion or division by zero that terminates the client session. |
| NVIDIA nvJPEG contains a vulnerability where an attacker could cause a divide-by-zero. A successful exploit of this vulnerability might lead to denial of service. |
| A divide-by-zero error exists in the SeekIndex function of demux/asf/asf.c in VideoLAN VLC media player 3.0.7.1. As a result, an FPE can be triggered via a crafted WMV file. |
| A divide-by-zero error exists in the Control function of demux/caf.c in VideoLAN VLC media player 3.0.7.1. As a result, an FPE can be triggered via a crafted CAF file. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: scd30: fix division by zero in write_raw
Add a zero check for val2 before using it as a divisor when setting the
sampling frequency. A user writing a zero fractional part to the
sampling_frequency sysfs attribute triggers a division by zero in the
kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: adis16260: fix division by zero in write_raw
Add a validation check for the sampling frequency value before using it
as a divisor. A user writing zero to the sampling_frequency sysfs
attribute triggers a division by zero in the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: nxp-sar-adc: fix division by zero in write_raw
Add a validation check for the sampling frequency value before using it
as a divisor. A user writing zero or a negative value to the
sampling_frequency sysfs attribute triggers a division by zero in the
kernel.
Also prevent unsigned integer underflow when the computed cycle count is
smaller than NXP_SAR_ADC_CONV_TIME, which would wrap the u32 inpsamp to
a huge value. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: avoid divide by zero in fib_rebalance
fib_rebalance() computes the total eligible nexthop weight in one pass
and programs upper bounds in a second pass. A concurrent change to
ignore_routes_with_linkdown can make the first pass return zero while
the second pass sees an eligible nexthop, resulting in division by zero.
If the first pass reports a zero total, set each nexthop upper bound to
-1 and skip the division. This matches the IPv6 fix in commit
d2c26c2911dd ("ipv6: avoid divide by zero in rt6_multipath_rebalance")
and preserves the lock-free rebalance path. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: block2mtd: Fix divide error when erase_size is zero
The erase size is parsed from the "block2mtd" module parameter and can
be set to zero. add_device() then evaluates
if (size % erase_size)
with a zero divisor, which triggers a divide error:
divide error: 0000 [#1] PREEMPT SMP PTI
RIP: 0010:add_device drivers/mtd/devices/block2mtd.c:296 [inline]
RIP: 0010:block2mtd_setup2+0x592/0xda0 drivers/mtd/devices/block2mtd.c:459
Call Trace:
block2mtd_setup+0x27/0xe0 drivers/mtd/devices/block2mtd.c:476
param_attr_store+0x214/0x310 kernel/params.c:589
module_attr_store+0x65/0x90 kernel/params.c:904
kernfs_fop_write_iter+0x3a4/0x540 fs/kernfs/file.c:345
...
Reject a zero erase size before performing the modulo operation so the
existing "erasesize must be a divisor of device size" error path
reports the invalid argument and frees the device. |
