| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Remark42 is a self-hosted comment engine for blogs, articles, or any other place where readers can add comments. From 1.0.0 until 1.16.2, Remark42 globally trusts True-Client-IP, X-Real-IP, and X-Forwarded-For without verifying that the direct peer is a trusted proxy, and middleware.RealIP overwrites r.RemoteAddr before per-IP controls run. In a directly reachable deployment, or a proxy that forwards attacker-controlled headers, a remote attacker can rotate spoofed forwarding headers to obtain fresh token buckets for rate-limited endpoints, bypass vote de-duplication when --votes-ip is enabled, mint anonymous identities, and poison stored comment IPs and request logs. The global concurrent-request throttle and per-request timeouts still limit availability impact. Mitigation support is available in version 1.16.2, but operators must configure --trusted-proxy for the deployment topology. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix constant blinding for PROBE_MEM32 stores
BPF_ST | BPF_PROBE_MEM32 immediate stores are not handled by
bpf_jit_blind_insn(), allowing user-controlled 32-bit immediates to
survive unblinded into JIT-compiled native code when bpf_jit_harden >= 1.
The root cause is that convert_ctx_accesses() rewrites BPF_ST|BPF_MEM
to BPF_ST|BPF_PROBE_MEM32 for arena pointer stores during verification,
before bpf_jit_blind_constants() runs during JIT compilation. The
blinding switch only matches BPF_ST|BPF_MEM (mode 0x60), not
BPF_ST|BPF_PROBE_MEM32 (mode 0xa0). The instruction falls through
unblinded.
Add BPF_ST|BPF_PROBE_MEM32 cases to bpf_jit_blind_insn() alongside the
existing BPF_ST|BPF_MEM cases. The blinding transformation is identical:
load the blinded immediate into BPF_REG_AX via mov+xor, then convert
the immediate store to a register store (BPF_STX).
The rewritten STX instruction must preserve the BPF_PROBE_MEM32 mode so
the architecture JIT emits the correct arena addressing (R12-based on
x86-64). Cannot use the BPF_STX_MEM() macro here because it hardcodes
BPF_MEM mode; construct the instruction directly instead. |
| Kyverno before 1.19.2 contains an authorization bypass vulnerability in the Generation Handler that allows users with create/update permissions to trigger synchronized generate policies by spoofing internal generate.kyverno.io labels. Attackers can label a ConfigMap as managed-by kyverno with crafted policy, rule, and trigger labels to clone sensitive Secrets from restricted namespaces into their own namespace. |
| Kyverno before 1.19.2 contains a policy bypass vulnerability in the admissionpolicygenerator controller, which folds PolicyExceptions into generated ValidatingAdmissionPolicies while ignoring the --enablePolicyException, --exceptionNamespace, and policy kind gates. Users with namespaced create rights on PolicyExceptions can inject negated matchConditions into the generated policies to admit violating resources, bypassing cluster-wide enforcement. |
| @twilio-labs/netlify-okta-auth through 1.0.2 relies on an unverified iss claim. This affects an outbound HTTP request to retrieve a public signing key. There may be other impacts in a misconfiguration where oktaUrl isn't set. |
| A vulnerability was identified in 6amTech 6valley 16.0. Impacted is the function existingAccountCheck of the file /api/v1/auth/existing-account-check of the component Social Login Flow. Such manipulation of the argument user_response leads to authorization bypass. The attack may be launched remotely. The exploit is publicly available and might be used. |
| Improper Authorization vulnerability in Apache ZooKeeper.
When SASL authentication is enabled on the client port, the server's SASL callback handler grants every authorization identity (authzid) that a client requests, without checking it against the principal the client authenticated as. The server then tries to replace the requested identity with a canonical form of the authenticated principal, derived from the zookeeper.security.auth_to_local rules. If no rule applies to the principal, canonicalization fails and the error is only logged. The client-requested authzid then becomes the session's SASL identity for all ACL checks.
An authenticated client whose principal is not covered by the auth_to_local rules can therefore claim any SASL identity. With the default rules, this includes any Kerberos principal from a realm other than the server's default realm, such as a principal from a cross-realm trusted realm. The client then gets the permissions granted to that identity in sasl ACLs. If the requested identity matches a configured zookeeper.superUser, it gets superuser access to the whole data tree.
Users are recommended to upgrade to version 3.8.8 or 3.9.7, which fixes the issue. |
| yudao-cloud through 2026.09 contains an authorization bypass vulnerability that allows authenticated users to evade row-level data scope restrictions by sending a data-permission-enable header set to false. Attackers can add this header to /admin-api requests, which DataPermissionRpcWebFilter trusts, to read or modify other departments' and users' records within the same tenant. |
| OAuthLib is an implementation of the OAuth request-signing logic for Python 3.6+. Prior to 4.0.0, the client_credentials and Resource Owner Password Credentials token grant handlers can authenticate request.client as one confidential client while retaining an attacker-supplied request.client_id for validate_grant_type and validate_scopes. A lower-privilege authenticated client can therefore cause grant and scope authorization to use another client's identity when an application validator relies on the documented client_id argument, potentially issuing tokens with unauthorized grants or scopes. Validators that authorize exclusively from request.client may not be affected. This issue is fixed in version 4.0.0. |
| Echo is a Go web framework. Prior to 4.16.0 and 5.4.0, Context.Scheme unconditionally trusts forwarded scheme headers from any client. A client that reaches Echo directly over plaintext HTTP can claim an HTTPS scheme and bypass HTTPSRedirect because the request is treated as already secure. Separately, behind a TLS-terminating proxy that passes an attacker-controlled header, a claimed HTTP scheme can suppress the Strict-Transport-Security header even though the browser receives the response over HTTPS. The practical risk is reduced when a trusted proxy overwrites the headers and direct backend access is prevented, but the framework previously had no trusted-source configuration for this decision. This issue is fixed in 4.16.0 and 5.4.0. |
| Echo is a Go web framework. Prior to 4.16.0 and 5.4.0, Echo's MethodOverride middleware accepts a safe HTTP method as the override target for a POST request. When MethodOverride is registered before CSRF in the post-routing middleware chain, route selection retains the original state-changing POST handler but the override changes the method before CSRF evaluates it, causing both token validation and Sec-Fetch-Site checks to be skipped. A cross-site exploit requires an authenticated victim and an override value that a browser-submitted request can control, such as the form getter used by the advisory reproducer; the default X-HTTP-Method-Override header getter is not settable by a cross-site form. This issue is fixed in 4.16.0 and 5.4.0. |
| Echo is a Go web framework. From 4.0.0 until 5.1.0, Context.RealIP falls back to client-supplied X-Forwarded-For or X-Real-IP values when Echo.IPExtractor is unset, and the default RateLimiter uses that result as its client identifier. A remote attacker can rotate arbitrary forwarded-address values to obtain new rate-limit buckets and bypass IP-based throttling used for controls such as brute-force or request-volume protection. This issue is fixed in Echo v5.1.0. |
| Hydra is a layer-two scalability solution for Cardano. Prior to 2.1.0, the `Claim` branch in `hydra-plutus/validators/deposit.ak` checks only that `datum.head_id` matches the attacker-controlled `redeemer.currencySymbol` and that the transaction is valid before the deposit deadline. It neither requires spending the Head state-token UTxO in the same transaction nor constrains outputs. After a deposit made through `POST /commit` is confirmed, any third party able to build a Cardano transaction can observe and consume the pending deposit UTxO before its deadline and redirect the assets to an arbitrary address. A standalone deposit spend invokes no Head validator, bypassing its safety checks; historical head-ID binding and the Aiken rewrite retained this missing invariant. The default deadline is three times depositPeriod, so the described attack applies to pending deposits before that deadline. This issue is fixed in version 2.1.0. |
| croc is a tool that allows any two computers to simply and securely transfer files and folders. Prior to 11.5.2, the receive-side file-readiness loop in src/croc/croc.go treats any sender-controlled basename beginning with croc-stdin- as a trusted text-transfer artifact even when SendingText is false. This skips askReceiveOverwrite and rename handling for a predictable exact-name collision in the receiver's working directory, allowing a remote sender whose transfer the user accepts to overwrite or truncate a matching regular file through recipientInitializeFile, or to remove and replace a matching destination with an empty file or an in-directory symlink through createEmptyFileAndFinish, without confirmation. The impact is limited to pre-existing names in the croc-stdin- namespace that the sender can predict; other filenames retain the prompt, dotfiles outside that namespace are not reachable, and symlink targets remain confined to the receive directory. This issue is fixed in version 11.5.2. |
| Incomplete string validation in AWS aws-nitro-enclaves-sdk-c before 0.4.6 may allow a third party to impersonate the AWS KMS endpoint.
To remediate this issue, users should rebuild any custom enclave image against aws-nitro-enclaves-sdk-c 0.4.6. |
| When NLnet Labs Unbound up to and including version 1.26.1 is configured with both a root trust anchor and an additional 'trust-anchor:' for an island-of-security zone whose parent is provably insecure under the root chain, a malicious actor who can deliver one forged NXDOMAIN response for a name inside the island, with the NSEC/SOA RRSIG 'SignerName' set to the insecure parent, tricks Unbound's validator to use the root trust anchor instead, and consecutively the insecure parent, thus causing that record to be treated as insecure and denying existence for records in the trust island. |
| Reliance on untrusted inputs in a security decision in Windows IKE Extension allows an unauthorized attacker to perform spoofing over a network. |
| Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to 1.9.0, OpenIDImplicitGrant.validate_authorization_request() checks the client-controlled raw request.payload.scope for openid after the parent grant has filtered allowed scopes into request.scope. A registered client permitted an ID token response type but not the openid scope can add openid to the request, obtain user consent, and receive a signed ID token containing the user's subject and allowed profile claims. Authorization code flow and deployments that allow openid for every client permitted an ID token response are not affected. In authlib/oidc/core/grants/implicit.py, OpenIDImplicitGrant.validate_authorization_request() checks request.payload.scope instead of the filtered request.scope. This issue is fixed in version 1.9.0. |
| Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to 1.9.0, OpenIDMixin.parse_id_token() reads the nonce_supported decision from the untrusted ID token being validated and sets the expected nonce to null when that claim is the JSON boolean false. In implicit and hybrid relying parties, or applications that directly accept externally supplied ID tokens, an attacker with a captured validly signed token can bypass the nonce-to-session binding and replay the victim's token into an attacker-controlled session. Plain authorization code flow is not affected, and the token must still pass signature, issuer, and audience validation. OpenIDMixin.parse_id_token() trusts nonce_supported in both authlib/integrations/base_client/sync_openid.py and authlib/integrations/base_client/async_openid.py to disable the expected nonce. This issue is fixed in version 1.9.0. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: populate CONNECT filter fields for 24-byte sockaddr_in6
io_connect_bpf_populate() fills connect.port and connect.v6_addr for
AF_INET6 only when addr_len >= sizeof(struct sockaddr_in6), i.e. 28
bytes.
The IPv6 connect paths accept SIN6_LEN_RFC2133 (24 bytes), which
already holds sin6_port and sin6_addr. io_connect() passes addr_len to
the socket layer unchanged.
At addr_len 24 the filter sees family AF_INET6 with port and address
zero, while the kernel connects to the real destination. A filter that
denies an IPv6 port or address is bypassed. Denying connect.port == P
rejects [::1]:P with -EACCES at addr_len 28 but connects at addr_len 24.
Use SIN6_LEN_RFC2133 as the threshold. sin6_scope_id stays zero when
absent.
The threshold mismatch was found by an AI coding assistant (Claude Code)
comparing this hook against the net/ipv6 length checks on my
instructions; it also drafted the reproducer and this patch. I verified
the bypass and the fix in a VM on 7.3-rc6 and that 7.2 has the same
code. |
