Export limit exceeded: 421276 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 421276 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 421276 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (421276 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99282 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_teql: fix use-after-free on lower qdisc drop The issue: teql_master_xmit() tests the slave's ndo_start_xmit() return value against NETDEV_TX_OK alone. A slave that consumes the skb but returns an error code (rc < NET_XMIT_MASK, e.g. NET_XMIT_DROP) is treated as if the skb were still owned, so the loop restores skb->dev and calls __skb_pull() on it. A VLAN slave returns the result of dev_queue_xmit() from its ndo_start_xmit() (propagated since cbbef5e18307), and when the lower qdisc drops the packet that value is NET_XMIT_DROP after the skb has been freed, giving a use-after-free in teql_master_xmit(). The Fix: test for consumption with dev_xmit_complete(), which accepts NETDEV_TX_OK and every rc < NET_XMIT_MASK, matching other callers that need to distinguish consumed results from busy. Only NETDEV_TX_OK keeps the packet counted in tx_packets/tx_bytes and advances the slave; a consumed result that is neither a success nor NET_XMIT_CN ends the attempt and is charged to tx_dropped, so lower-qdisc drops are no longer reported as good transmits. NET_XMIT_CN is counted like success because it can accompany acceptance of the current packet: pfifo_head_drop drops the old head, enqueues the current skb and returns NET_XMIT_CN. Conditions to recreate the bug: With CONFIG_NET_SCH_TEQL, CONFIG_VLAN_8021Q and CONFIG_DUMMY enabled, add lkrdummy0 (dummy) and lkrvlan0 (VLAN id 37 on lkrdummy0); set a pfifo limit 0 root on lkrdummy0 and a teql0 root on lkrvlan0; bring teql0 up with an address and send one UDP packet to it. The VLAN xmit returns NET_XMIT_DROP from the lower qdisc while holding a freed skb. | ||||
| CVE-2026-99283 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-08 | 3.7 Low |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: tcp: use UNACK timeout for non-closing RST packets Commit be0502a3f2e9 ("netfilter: conntrack: tcp: only close if RST matches exact sequence") keeps an established conntrack entry in ESTABLISHED when an in-window RST does not match the expected sequence number exactly, so the endpoint can validate the RST with a challenge ACK. The timeout selection nevertheless uses the CLOSE timeout for every RST packet. The bug is that timeout selection is based on the packet type, not on the state transition result: even when RST validation keeps new_state in ESTABLISHED, the timeout is still forced to TCP_CONNTRACK_CLOSE. Linux TCP independently rate limits challenge ACKs per socket. A second non-exact RST can therefore arrive after the first challenge ACK has restored the timeout but before the rate limit expires. The second RST lowers the timeout to 10 seconds again while the endpoint suppresses the second challenge ACK, allowing the conntrack entry to expire while both TCP endpoints remain established. Using the ESTABLISHED timeout for such RSTs would avoid this short expiration window, but it could also retain stale entries for the five-day default because conntrack cannot reliably match the endpoint's exact TCP state. Use the UNACK timeout for RST packets that leave the conntrack entry in TCP_CONNTRACK_ESTABLISHED. Exact-match RSTs and accepted RST packet trains still fall through to timeouts[new_state], which preserves the CLOSE timeout when conntrack accepts the RST as closing the flow. This avoids the aggressive 10-second expiration window for non-exact RSTs while preserving the short timeout for RSTs that conntrack accepts as closing the flow. | ||||
| CVE-2026-123615 | 1 Evilmartians | 1 Imgproxy | 2026-11-08 | 7.5 High |
| imgproxy 3.3.0 before 4.0.17 contains an out-of-bounds heap read and write in the ICO loader's BMP header reconstruction (vips_foreign_load_ico_header in vips/icoload.c) when an ICO entry declares a tiny data size, causing unvalidated header fields to be read and written past the allocated buffer. Unauthenticated remote attackers can supply a crafted ICO image to corrupt adjacent heap chunk metadata, triggering a glibc abort that crashes the worker. | ||||
| CVE-2026-123613 | 1 Rustls Project | 1 Rustls | 2026-11-08 | 5.3 Medium |
| Rustls from 0.23.13 before 0.23.45 accepts TLS 1.3 handshake messages at the wrong encryption level when they follow a key-changing message in the same record, because Deframer::aligned does not enforce RFC 8446 record-boundary alignment. A peer or on-path attacker can pack a plaintext EncryptedExtensions with the ServerHello, which rustls accepts unencrypted. | ||||
| CVE-2026-123612 | 1 Rustls Project | 1 Rustls | 2026-11-08 | 2.3 Low |
| rustls 0.23.44 and 0.23.45 contain an information disclosure vulnerability that sends application data buffered before the handshake completes to the client-facing server when Encrypted Client Hello is rejected. Because start_traffic() queues plaintext from ClientConnection::writer() before sending the ech_required alert, the authenticated public_name server receives data intended for the inner server. | ||||
| CVE-2026-123611 | 1 Rustls Project | 1 Rustls | 2026-11-08 | 3.7 Low |
| rustls before 0.23.46 contains a key exchange downgrade vulnerability that allows network attackers to poison the per-server-name key-exchange group record via an unauthenticated ServerHello. Attackers can answer one connection with a ServerHello selecting X25519, causing later ClientHellos to send only classical shares and lose post-quantum confidentiality. | ||||
| CVE-2026-123610 | 1 Rustls Project | 1 Rustls | 2026-11-08 | 3.7 Low |
| rustls before 0.23.46 contains an uncontrolled memory allocation flaw in its optional Brotli certificate decompression, which limits decompressed output size but accepts an input-selected large history window. Malicious peers can send a certificate with a five-byte Brotli header requesting up to 1 GiB before authentication, aborting Brotli-enabled clients or client-authenticating servers whose allocator cannot satisfy the request. | ||||
| CVE-2026-123609 | 1 Rustls Project | 1 Rustls | 2026-11-08 | 4 Medium |
| Rustls before 0.23.46 and 0.24.0-dev.1 before 0.24.0-dev.2 contains an information disclosure vulnerability where derived Debug formatting of client session values exposes secret key material. Custom ClientSessionStore implementations that log Tls12ClientSessionValue or Tls13ClientSessionValue can leak TLS 1.2 master secrets or TLS 1.3 resumption PSKs to log readers. | ||||
| CVE-2026-123608 | 2026-11-08 | 7.5 High | ||
| Hickory DNS hickory-proto from 0.3.1 before 0.26.1 contains a denial of service vulnerability in BinEncoder that allows remote attackers to exhaust CPU through quadratic-time name compression. Attackers can send malicious DNS messages with many records that add many candidate labels and trigger repeated linear scans during encoding, amplifying CPU exhaustion. | ||||
| CVE-2026-123607 | 2026-11-08 | 7.5 High | ||
| Hickory DNS hickory-proto 0.25.0-alpha.3 through 0.25.2 and hickory-net before 0.26.1 contain an unbounded loop vulnerability in DnssecDnsHandle NSEC3 closest-encloser proof validation when the SOA owner is not an ancestor of the QNAME. Upstream attackers can return NoData or NXDomain responses with a cross-zone SOA record to panic debug builds or exhaust memory in release builds. | ||||
| CVE-2026-123606 | 2026-11-08 | 7.5 High | ||
| The hickory-dns recursor in hickory-recursor 0.25.0-alpha.3 through 0.25.2 and hickory-resolver 0.26.0-alpha.1 before 0.26.2 iterates every out-of-bailiwick NS target lacking glue in a referral without any per-query work budget. Remote attackers can serve such referrals to force A and AAAA lookups per target, amplifying traffic against remote servers or exhausting recursor resources. | ||||
| CVE-2026-123605 | 2026-11-08 | 8.8 High | ||
| Hickory DNS hickory-proto 0.1 through 0.25.0-alpha.3 and hickory-net before 0.26.2 contain a DNSSEC validation bypass because the validator verifies an RRSIG against the DNSKEY of whatever name appears in its Signer's Name field without checking that this name is the zone containing the RRset. Attackers controlling any secure zone can produce valid signatures over arbitrary records in unrelated zones, which resolvers, recursors, and clients using DnssecDnsHandle accept as authenticated. | ||||
| CVE-2026-123604 | 2026-11-08 | 7.5 High | ||
| Hickory DNS hickory-resolver 0.26.0-beta.1 before 0.26.2 contains an unbounded retry loop in NameServerPool::try_send, which re-queues truncated (TC) responses without checking the answering transport or counting iterations. A malicious authoritative server returning TC=1 on every transport keeps the resolver spinning on a persistent TCP connection until the 5-second request deadline expires, causing resource exhaustion. | ||||
| CVE-2026-123603 | 2026-11-08 | 6.5 Medium | ||
| hickory-proto and hickory-resolver 0.26.0 before 0.26.2, hickory-server 0.25.0-alpha.1 before 0.26.2, and hickory-recursor 0.25.0-alpha.3 through 0.26.0-alpha.1 fail to canonicalize IPv4-mapped IPv6 addresses when checking deny_answers, deny_server, or AccessControlSet rules. Attackers can use IPv4-mapped addresses to evade answer filtering, trigger queries to denied nameservers, or reach hickory-server library deployments on dual-stack IPv6 sockets from denied clients. | ||||
| CVE-2026-123602 | 2026-11-08 | 5.9 Medium | ||
| The Hickory DNS recursor in all versions of hickory-recursor and in hickory-resolver 0.26.0-beta.1 before 0.26.2 (recursor feature) is vulnerable to ghost domain names attacks because it reuses child-side apex NS RRsets cached from zone NS queries for iterative resolution. By repeatedly querying a zone's NS records, an attacker keeps the stale RRset cached indefinitely, letting name servers whose delegation the parent revoked keep answering for the zone. | ||||
| CVE-2026-123601 | 2026-11-08 | 6.5 Medium | ||
| Hickory DNS hickory-proto 0.25.0 through 0.26.0-alpha.1 and hickory-net 0.26.0-beta.1 before 0.26.2 invert the relational operators in the wrap-around branch of find_covering_record() in nsec3.rs, so the last NSEC3 record in a zone's hash ring covers every hash except its owner. Attackers able to inject DNS responses can replay that NSEC3 record and its RRSIG to forge DNSSEC-validated negative responses denying legitimate names. | ||||
| CVE-2026-123600 | 2026-11-08 | 4.8 Medium | ||
| Hickory DNS hickory-proto 0.25.0-alpha.3 through 0.25.2 and hickory-net 0.26.0-alpha.1 before 0.26.2 contain a DNSSEC validation flaw in DnssecDnsHandle that accepts NSEC3-signed NODATA responses for zone-apex queries as secure without an NSEC3 record matching the hashed QNAME. On-path attackers or malicious authoritative servers can replay a validly signed non-apex NSEC3 with the zone's signed SOA to serve an authenticated (AD=1) denial of any apex RRtype for the negative-cache TTL. | ||||
| CVE-2026-123599 | 2026-11-08 | 3.7 Low | ||
| Hickory DNS hickory-proto before 0.26.0-beta.1 and hickory-net before 0.26.2 contain a DNSSEC validation bypass because verify_rrsets() ignores DNS class when partitioning RRsets, so non-IN records skip signature verification yet are marked secure when the IN records verify. Attackers able to supply DNS responses can include forged CH or HS class records, including DS records, to authenticate any DNSKEY and forge child zone responses. | ||||
| CVE-2026-123598 | 2026-11-08 | 3.7 Low | ||
| The validating recursor in Hickory DNS hickory-recursor 0.25.0 through 0.26.0-alpha.1, hickory-resolver 0.26.0-alpha.1 before 0.26.2, and hickory-net 0.26.0-beta.1 before 0.26.2 caches DNSSEC-bogus answers using the untrusted, attacker-supplied record TTL (capped at 24 hours) instead of a short validation-failure TTL. A remote attacker who spoofs a single authoritative response with an invalid signature and a long TTL can keep the bogus result cached for up to 24 hours. | ||||
| CVE-2026-123597 | 2026-11-08 | 3.7 Low | ||
| Hickory DNS hickory-proto 0.25.0-alpha.1 through 0.26.0-alpha.1 and hickory-net before 0.26.2 contain a logic bug in DnssecDnsHandle's DS-fetch path that caches transient DS lookup errors as Bogus DNSSEC validation verdicts. An attacker who induces a SERVFAIL, REFUSED, or timeout response to a child-zone DS sub-query causes the validator to return SERVFAIL for all names under that zone until the cache entry's TTL expires. | ||||