Export limit exceeded: 421043 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 36450 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36450 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64335 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix broken rx after throttle If the port is closed while throttled, the read urb is never resubmitted and the port will not receive any further data until the device is reconnected (or the driver is rebound). Clear the throttle flags and submit the urb if needed when opening the port. | ||||
| CVE-2026-64326 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: skip sync_blockdev() on surprise removal in bdev_mark_dead() bdev_mark_dead()'s @surprise == true means the device is already gone. The filesystem callback fs_bdev_mark_dead() honours this and skips sync_filesystem(), but the bare block device path (no ->mark_dead op) lost its !surprise guard when the holder ->mark_dead callback was wired up (see Fixes), and now calls sync_blockdev() unconditionally, which can hang forever waiting on writeback that can no longer complete. syzkaller hit this via nvme_reset_work()'s "I/O queues lost" path: nvme_mark_namespaces_dead() -> blk_mark_disk_dead() -> bdev_mark_dead(bdev, true) -> sync_blockdev() blocks in folio_wait_writeback(), wedging the reset worker and every task waiting on it. Skip the sync on surprise removal, matching fs_bdev_mark_dead(); invalidate_bdev() still runs. Orderly removal (surprise == false) is unchanged. Found by FuzzNvme(Syzkaller with FEMU fuzzing framework). | ||||
| CVE-2026-64316 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: caam - use print_hex_dump_devel to guard key hex dumps Use print_hex_dump_devel() for dumping sensitive key material in *_setkey() and gen_split_key() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled. | ||||
| CVE-2026-64310 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for SEV ioctls Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? sev_move_to_init_state() is called for ioctls requiring only SEV firmware: SEV_PEK_GEN, SEV_PDH_GEN, SEV_PEK_CSR, SEV_PEK_CERT_IMPORT, and SEV_PDH_CERT_EXPORT. After the firmware command, it does SEV_SHUTDOWN on the SEV firmware. Since these commands do not require SNP to be initialized, skip it by calling __sev_platform_init_locked() which only initializes the SEV firmware. This way SNP is not Initialized at all, and HSAVE_PA is not cleared. The previous code saved any SEV initialization firmware error to init_args.error and then threw it away and hardcoded the return value of INVALID_PLATFORM_STATE regardless of the real firmware error. This patch changes it to surface the underlying error, which is hopefully both more useful and doesn't cause any problems. Note that it is still safe to call __sev_firmware_shutdown() directly: it calls __sev_snp_shutdown_locked(), which skips SNP shutdown if SNP was not initialized. | ||||
| CVE-2026-64308 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for ioctl(SNP_VLEK_LOAD) Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? The SEV firmware docs for SNP_VLEK_LOAD note: > On SNP_SHUTDOWN, the VLEK is deleted. That is, the initialization/shutdown wrapper here is pointless, because the firmware immediately throws away the key anyway. Instead, refuse to do anything if SNP has not been previously initialized. This is an ABI break: before, this was a no-op and almost certainly a mistake by userspace, and now it returns -ENODEV. ABI compatibility could be maintained here by simply returning 0 in the check instead. | ||||
| CVE-2026-64307 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for ioctl(SNP_CONFIG) Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? Refuse to re-try initialization if SNP is not already initialized for SNP_CONFIG. This is technically an ABI break: before if SNP initialization failed it could be transparently retriggered by this ioctl, and if no VMs were running, everything worked fine. Hopefully this is enough of a corner case that nobody will notice, but someone does, there are a few options: * do something like symbol_get() for kvm and refuse to initialize if KVM is loaded * check each cpu's HSAVE_PA for non-zero data before re-initializing * once initialization has failed, continue to refuse to initialize until the ccp module is unloaded | ||||
| CVE-2026-64306 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: drbg - Fix returning success on failure in CTR_DRBG drbg_ctr_generate() sometimes returns success when it fails, leaving the output buffer uninitialized. Fix it. | ||||
| CVE-2026-64294 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: do file ownership checks with the proper mount idmap Ever since idmapped mounts were introduced, inode ownership checks (for side-channel protection) in mincore() and madvise(MADV_PAGEOUT) were done against the nop_mnt_idmap, which completely ignores the file's mount's idmap. This results in odd edgecases like: 1) mount/bind-mount with an idmap userA:userB:1 2) userB runs an owner_or_capable() check on file that is owned by userA on-disk/in-memory, but owned by userB after idmap translation 3) owner_or_capable() mysteriously fails as the correct idmap wasn't supplied In the case of mincore/madvise MADV_PAGEOUT, this is usually benign, because file_permission(file, MAY_WRITE) will probably succeed, as it uses the proper idmap internally, but it does not need to be the case on e.g a 0444 file where even the owner itself doesn't have permissions to write to it. Since this is clearly not trivial to get right, introduce a file_owner_or_capable() that can carry the correct semantics, and switch the various users in mm to it. The issue was found by manual code inspection & an off-list discussion with Jan Kara. | ||||
| CVE-2026-64291 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Set veventq_depth upper bound iommufd_veventq_alloc() accepts any !0 veventq_depth from userspace, with an upper bound at U32_MAX. This leaves a vulnerability where userspace can allocate excessively large queues to exhaust kernel memory reserves. Cap the veventq_depth (maximum number of entries) to 1 << 19, matching the maximum number of entries in the SMMUv3 EVTQ (the largest use case today). | ||||
| CVE-2026-64289 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Set upper bounds on cache invalidation entry_num and entry_len iommufd_hwpt_invalidate() takes a user-controlled entry_num and entry_len, each bounded only by U32_MAX. An entry_len beyond the kernel's struct size makes the copy helper verify the extra bytes are zero, scanning that excess in one uninterruptible pass; a multi-gigabyte value over zeroed user memory trips the soft-lockup watchdog. A large entry_num is the other half, driving the backend invalidation loop with no reschedule. The VT-d nested handler, for one, copies each entry and flushes caches per iteration, pinning the CPU on a non-preemptible kernel. Cap both in the ioctl. entry_len is held under PAGE_SIZE, above any request struct, and entry_num under 1 << 19, the order of a hardware invalidation queue and well beyond any real batch, bounding the per-call loop length. | ||||
| CVE-2026-64256 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't wrap around quota ids in dqiterate LOLLM noticed that q_id is an unsigned 32-bit variable. If it happens to be set to XFS_DQ_ID_MAX due to a filesystem that actually has a dquot for ID_MAX, then this addition will truncate to zero and the iteration starts over. Fix this by casting to u64. | ||||
| CVE-2026-64244 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drivers/base/memory: set mem->altmap after successful device registration If __add_memory_block() fails at xa_store() (under memory pressure for example), device_unregister() is called, which eventually triggers memory_block_release() with mem->altmap still set, causing a WARN_ON(mem->altmap). This was triggered by modifying virtio-mem driver. Fix this by delaying the assignment of mem->altmap until after __add_memory_block() has succeeded. | ||||
| CVE-2026-64213 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Add lock protection to lm90_alert Sashiko reports: lm90_alert() executes in the smbus alert context and calls lm90_update_confreg() to disable the hardware alert line, without acquiring hwmon_lock. Concurrently, sysfs write operations (such as lm90_write_convrate) hold the hwmon_lock, temporarily modify data->config, and then restore it. If an alert interrupt occurs concurrently with a sysfs write, the sysfs path will overwrite the alert handler's modifications to data->config and the hardware register. This unintentionally re-enables the hardware alert line while the alarm is still active, causing an interrupt storm. Add the missing lock to lm90_alert() to solve the problem. | ||||
| CVE-2026-64205 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: i801: fix hardware state machine corruption in error path A severe livelock and subsequent Hung Task panic were observed in the i2c-i801 driver during concurrent Fuzzing. The crash is caused by an unconditional hardware register cleanup in the error handling path of i801_access(). When i801_check_pre() fails (e.g., returning -EBUSY because the SMBus controller is actively used by BIOS/ACPI), the kernel does not actually acquire the hardware ownership. However, the code jumps to the 'out' label and executes: iowrite8(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv)); This forcefully clears the INUSE_STS lock and resets the hardware status flags without owning the controller. Doing so interrupts ongoing BIOS/ACPI transactions and totally corrupts the SMBus hardware state machine. Consequently, all subsequent i801_access() calls fail at the pre-check stage, triggering an endless stream of "SMBus is busy, can't use it!" error logs. Over a slow serial console, this printk flood monopolizes the CPU (Console Livelock), starving other processes trying to acquire the mmap_lock down_read semaphore, ultimately triggering the hung task watchdog. Fix this by moving the 'out' label below the hardware register cleanup. If i801_check_pre() fails, we safely bypass the iowrite8() and only release the software locks (pm_runtime and mutex), strictly adhering to the rule of not releasing resources that were never acquired. | ||||
| CVE-2026-64185 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sysfs: don't remove existing directory on update failure When sysfs_update_group() is called for a named group and create_files() fails (e.g. -ENOMEM), internal_create_group() calls kernfs_remove(kn) on the group directory. In the update path, kn was obtained via kernfs_find_and_get() and refers to a directory that already existed before this call. Removing it silently destroys a sysfs group that the caller did not create. Only remove the directory if we created it ourselves. On update failure the directory remains as it is left empty by remove_files() inside create_files(), but can be repopulated by a retry. | ||||
| CVE-2026-64184 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: call missing mem_cgroup_iter_break() damon_sysfs_memcg_path_to_id() breaks mem_cgroup_iter() loop without calling mem_cgroup_iter_break(). This leaks the cgroup reference. Fix the issue by calling mem_cgroup_iter_break() before the break. The issue was discovered [1] by Sashiko. | ||||
| CVE-2026-64174 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: advance loop vars in cfg80211_merge_profile() cfg80211_merge_profile() reassembles a Multi-BSSID non-transmitted BSS profile that has been split across multiple consecutive MBSSID elements. Its while-loop calls cfg80211_get_profile_continuation(ie, ielen, mbssid_elem, sub_elem) but never advances mbssid_elem or sub_elem inside the body. Each iteration therefore searches for a continuation that follows the same fixed pair; the helper returns the same next_mbssid; and the same next_sub bytes are memcpy()'d into merged_ie at a growing offset until the buffer fills. Advance both mbssid_elem and sub_elem to the just-consumed continuation so the next call to cfg80211_get_profile_continuation() searches for a further continuation beyond it (or returns NULL when none exists). A specially-crafted malicious beacon can take advantage of this bug to cause the kernel to spend an excessive amount of time in cfg80211_merge_profile (up to as much as 2ms per beacon received), which could theoretically be abused in some way. | ||||
| CVE-2026-64173 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Do not call map->ops->elt_free() if elt_alloc() fails In paths where tracing_map_elt_alloc() failed to allocate objects, the map->ops->elt_alloc() call was never successful. In this case, map->ops->elt_free() should not be called. | ||||
| CVE-2026-64131 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/memory: fix spurious warning when unmapping device-private/exclusive pages Device private and exclusive entries are only supported for anonymous folios. This condition is tested in __migrate_device_pages() and make_device_exclusive() using folio_test_anon(). However the unmap path tests this assumption using vma_is_anonymous(). This is wrong because whilst anonymous VMAs can only contain folios where folio_test_anon() is true the opposite relation does not hold. A folio for which folio_test_anon() is true does not imply vma_is_anonymous() is true. Such a condition can occur if for example a folio is part of a private filebacked mapping. In this case vma_is_anonymous() is false as the mapping is filebacked, but folio_test_anon() may be true, thus permitting devices to migrate the folio to device private memory. This can lead to the following spurious warnings during process teardown: [ 772.737706] ------------[ cut here ]------------ [ 772.739201] WARNING: mm/memory.c:1754 at unmap_page_range.cold+0x26/0x18a, CPU#17: hmm-tests/2041 [ 772.742050] Modules linked in: test_hmm nvidia_uvm(O) nvidia(O) [ 772.743959] CPU: 17 UID: 0 PID: 2041 Comm: hmm-tests Tainted: G W O 7.0.0+ #387 PREEMPT(full) [ 772.747104] Tainted: [W]=WARN, [O]=OOT_MODULE [ 772.748509] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 772.752117] RIP: 0010:unmap_page_range.cold+0x26/0x18a [ 772.753780] Code: 7e fe ff ff 48 89 4c 24 78 4c 89 44 24 38 e8 f2 ff b1 00 48 8b 4c 24 78 4c 8b 44 24 38 48 8b 44 24 18 48 83 78 48 00 74 04 90 <0f> 0b 90 48 89 ca b8 ff ff 37 00 48 c1 ea 03 48 c1 e0 2a 80 3c 02 [ 772.759602] RSP: 0018:ffff888112607550 EFLAGS: 00010286 [ 772.761310] RAX: ffff88811bbf4dc0 RBX: dffffc0000000000 RCX: ffffea03e9bfffd8 [ 772.763583] RDX: 1ffff1102377e9c1 RSI: 0000000000000008 RDI: ffff88811bbf4e08 [ 772.765914] RBP: 0000000000000006 R08: ffff8881059f7448 R09: ffffed10224c0e68 [ 772.768184] R10: ffff888112607347 R11: 0000000000000001 R12: 0000000000000001 [ 772.770461] R13: ffffea03e9bfffc0 R14: ffff888112607908 R15: ffffea03e9bfffc0 [ 772.772782] FS: 00007f327caa2780(0000) GS:ffff888427b7d000(0000) knlGS:0000000000000000 [ 772.775328] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 772.777187] CR2: 00007f327ca89000 CR3: 00000001994d5000 CR4: 00000000000006f0 [ 772.779135] Call Trace: [ 772.779792] <TASK> [ 772.780317] ? dmirror_interval_invalidate+0x1a3/0x290 [test_hmm] [ 772.781873] ? vm_normal_page_pud+0x2b0/0x2b0 [ 772.782992] ? __rwlock_init+0x150/0x150 [ 772.784006] ? lock_release+0x216/0x2b0 [ 772.785008] ? __mmu_notifier_invalidate_range_start+0x505/0x6e0 [ 772.786522] ? lock_release+0x216/0x2b0 [ 772.787498] ? unmap_single_vma+0xb6/0x210 [ 772.788573] unmap_vmas+0x27d/0x520 [ 772.789506] ? unmap_single_vma+0x210/0x210 [ 772.790607] ? mas_update_gap.part.0+0x620/0x620 [ 772.791834] unmap_region+0x19e/0x350 [ 772.792769] ? remove_vma+0x130/0x130 [ 772.793684] ? mas_alloc_nodes+0x1f2/0x300 [ 772.794730] vms_complete_munmap_vmas+0x8c1/0xe20 [ 772.795926] ? unmap_region+0x350/0x350 [ 772.796917] do_vmi_align_munmap+0x36a/0x4e0 [ 772.798018] ? lock_release+0x216/0x2b0 [ 772.799024] ? vma_shrink+0x620/0x620 [ 772.799983] do_vmi_munmap+0x150/0x2c0 [ 772.800939] __vm_munmap+0x161/0x2c0 [ 772.801872] ? expand_downwards+0xd60/0xd60 [ 772.802948] ? clockevents_program_event+0x1ef/0x540 [ 772.804217] ? lock_release+0x216/0x2b0 [ 772.805158] __x64_sys_munmap+0x59/0x80 [ 772.805776] do_syscall_64+0xfc/0x670 [ 772.806336] ? irqentry_exit+0xda/0x580 [ 772.806976] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 772.807772] RIP: 0033:0x7f327cbb2717 [ 772.808323] Code: 73 01 c3 48 8b 0d f9 76 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 0b 00 00 00 0f 05 <48> 3d 01 f0 ff ---truncated--- | ||||
| CVE-2026-64127 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: ecred_reconfigure: send packed pdu, not stack pointer Commit 1c08108f3014 ("Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings") converted the on-stack request PDU in l2cap_ecred_reconfigure() from an explicit packed struct to DEFINE_RAW_FLEX(), but did not adjust the size and source-pointer arguments to l2cap_send_cmd(): - struct { - struct l2cap_ecred_reconf_req req; - __le16 scid; - } pdu; + DEFINE_RAW_FLEX(struct l2cap_ecred_reconf_req, pdu, scid, 1); ... l2cap_send_cmd(conn, chan->ident, L2CAP_ECRED_RECONF_REQ, sizeof(pdu), &pdu); After the conversion, DEFINE_RAW_FLEX() expands to declare an anonymous union pdu_u plus a local pointer "pdu" pointing at it. Therefore: - sizeof(pdu) is now sizeof(struct l2cap_ecred_reconf_req *) = 8 on 64-bit (4 on 32-bit), not the 6 bytes of (mtu, mps, scid[1]). - &pdu is the address of the local pointer's stack storage, not the address of the request payload. l2cap_send_cmd() forwards (data, count) to l2cap_build_cmd(), which calls skb_put_data(skb, data, count). The L2CAP_ECRED_RECONFIGURE_REQ packet body therefore contains 8 bytes copied from the kernel stack starting at &pdu -- the 8 bytes overlap the pdu pointer's value, leaking a kernel stack address to the paired Bluetooth peer. The intended (mtu, mps, scid) fields are not transmitted at all, so the peer rejects the request as malformed and the L2CAP_ECRED_RECONFIGURE feature itself has been broken for the local-side initiator since the introducing commit landed. The sibling site l2cap_ecred_conn_req() in the same commit was converted correctly (sizeof(*pdu) + len, pdu); only this site was missed. Restore the original semantics: pass the full flex-struct size via struct_size(pdu, scid, 1) and the pdu pointer (the struct address) as the source. Validated on a stock 7.0-based host kernel via the real call path: setsockopt(SOL_BLUETOOTH, BT_RCVMTU, ...) on a BT_CONNECTED L2CAP_MODE_EXT_FLOWCTL socket emits an L2CAP_ECRED_RECONFIGURE_REQ whose body is 8 bytes (the on-stack pdu local's value) rather than the expected 6. Three captures from fresh socket / fresh hciemu peer on the same host -- low bytes vary per call, high 0xffff confirms a kernel virtual address (KASLR-randomised stack slot, not a fixed string): RECONF_REQ body (ident=0x02 len=8): 42 fb 54 af 0e ca ff ff RECONF_REQ body (ident=0x02 len=8): 52 3d 2e af 0e ca ff ff RECONF_REQ body (ident=0x02 len=8): b2 fc 5b af 0e ca ff ff After this patch the body is 6 bytes carrying the expected little-endian (mtu, mps, scid). | ||||