Export limit exceeded: 55229 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (55229 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64598 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: Fix error code in smb2_aead_req_alloc() The "*num_sgs" variable is a u32 so "ERR_PTR(*num_sgs)" doesn't work. We would have to do something similar to the previous line where it's cast to int and then long. However, it's simpler to store the return in an int ret variable. This bug would eventually result in a crash when dereference the invalid error pointer. | ||||
| CVE-2026-68082 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: fix two unsafe bare decodes in decode_lockers() decode_lockers() in cls_lock_client.c contains two bare decode operations that allow a malicious or compromised OSD to trigger slab-out-of-bounds reads: 1. ceph_decode_32(p) at the num_lockers field has no preceding bounds check. ceph_start_decoding() accepts struct_len=0 as valid -- the internal ceph_decode_need(p, end, 0, bad) always passes -- so when an OSD sends struct_len=0, ceph_start_decoding() returns success with p == end. The immediately following bare ceph_decode_32(p) then reads 4 bytes past the validated buffer boundary. The garbage value is passed directly to kzalloc_objs() as the locker count. The sibling function decode_watchers() in osd_client.c already uses ceph_decode_32_safe() after its own ceph_start_decoding() call. decode_lockers() was the only site using the bare variant. 2. ceph_decode_8(p) after the decode_locker() loop has no preceding bounds check. If an OSD crafts num_lockers such that the loop advances p exactly to end, the subsequent bare ceph_decode_8(p) reads one byte past the validated buffer boundary. The result is passed directly into *type, which is used as a lock type discriminator by callers, giving an OSD-controlled one-byte OOB read with direct influence over the lock type field. Fix both by replacing bare operations with their safe variants: ceph_decode_32(p) -> ceph_decode_32_safe(p, end, *num_lockers, err_inval) ceph_decode_8(p) -> ceph_decode_8_safe(p, end, *type, err_free_lockers) The goto targets differ intentionally: err_inval: is a new label returning -EINVAL directly. It is used for the pre-allocation failure path where *lockers is not yet allocated and must not be passed to ceph_free_lockers(). err_free_lockers: is the existing label. It is used for the post-allocation failure path where *lockers is allocated and must be freed. ret is set to -EINVAL before ceph_decode_8_safe() so that err_free_lockers returns the correct error code on bounds violation. Without this, err_free_lockers would return a stale ret value (0 from the successful decode_locker() loop), silently swallowing the error. -EINVAL is correct for both failure paths. The data received from the OSD is structurally malformed. -ENOMEM would misrepresent the failure class to callers and to stable@ backporters triaging error paths. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment can trigger this against any kernel client that issues the lock.get_info class method (e.g. during RBD exclusive lock acquisition). [ idryomov: trim changelog, formatting ] | ||||
| CVE-2026-98582 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: validate received frame size st21nfca_hci_i2c_repack() trims a received frame at its EOF marker before removing byte stuffing. It then assumes the truncated frame contains the LLC header and two CRC bytes, and it unconditionally reads the byte after an escape marker. A malformed frame can place EOF immediately after the start marker or can end its data portion with an escape marker. The former leaves too few bytes for check_crc(), while the latter makes the unstuffing loop read past the current skb length. Require the minimum framing bytes both before and after unstuffing. Use separate input and output cursors while removing byte stuffing, and reject an escape marker without its encoded byte. This keeps malformed frames within the received frame boundary before CRC processing. | ||||
| CVE-2026-98621 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: gue: reject invalid REMCSUM offsets The REMCSUM option carries an absolute checksum start and checksum field offset. gue_remcsum() passes them to skb_remcsum_process(), whose partial path stores offset - start in the u16 skb->csum_offset variable. If offset is less than start, this underflows. A forwarded packet can retain CHECKSUM_PARTIAL and reach a NETIF_F_HW_CSUM driver which trusts the metadata, leading skb_copy_and_csum_dev() to write two bytes about 64 KiB beyond the destination buffer. Reject reversed tuples in validate_gue_flags(), after the existing length validation, so all GUE parsers enforce the ordering in one place. | ||||
| CVE-2026-76763 | 1 Redhat | 2 Build Of Quarkus, Quarkus | 2026-10-20 | 7.5 High |
| A flaw was found in SmallRye GraphQL. The number scalar coercion for BigInteger does not properly validate the magnitude of float or string inputs. An unauthenticated remote attacker can exploit this by sending a GraphQL query containing a large exponent float literal. This can lead to the allocation of extremely large BigInteger objects, causing CPU exhaustion or an OutOfMemoryError, resulting in a denial of service. | ||||
| CVE-2026-12894 | 1 Redhat | 7 Apache Camel Quarkus, Build Of Apache Camel For Quarkus, Build Of Quarkus and 4 more | 2026-10-20 | 8.8 High |
| A flaw was found in the Qute template engine, which is used by Quarkus to generate dynamic content like HTML pages or emails. The issue exists in the component responsible for looking up data values (ReflectionValueResolver), which fails to properly block access to sensitive Java internal functions when processing certain data types like Enums. An attacker who can provide or influence the template text can exploit this bypass to take control of the server by executing unauthorized commands. | ||||
| CVE-2026-9800 | 1 Redhat | 5 Build Keycloak, Build Of Keycloak, Jbosseapxp and 2 more | 2026-10-20 | 8.1 High |
| A flaw was found in Keycloak Policy Enforcer. This vulnerability allows any authenticated user to bypass all authorization policies, including role, scope, and User-Managed Access (UMA) permission checks. By including the configured access-denied page path within a request URL, either as a path segment or a query parameter, an attacker can gain unauthorized access to protected resources. | ||||
| CVE-2026-88753 | 2026-10-20 | 7.5 High | ||
| A Regular-Expression Denial of Service (ReDoS) in the Markdown2. extract_metadata() function (lib/markdown2.py) of trentm markdown2 through v2.5.5 allows attackers to cause a Denial of Service (DoS) via a crafted Markdown document. | ||||
| CVE-2026-110871 | 1 Nodemailer | 1 Nodemailer | 2026-10-20 | 6.5 Medium |
| Nodemailer from 3.0.0 before 10.0.10 contains a denial of service vulnerability in MessageParser.parseHeaders that allows users to exhaust CPU through quadratic header unfolding. Attackers can supply large recipient lists or long headers that fold into tens of thousands of continuation lines, blocking the Node.js event loop during DKIM signing. | ||||
| CVE-2026-110846 | 1 N8n | 1 N8n | 2026-10-20 | N/A |
| n8n before 2.41.4 and 2.42.x before 2.42.1 contains a signature bypass in the waiting-webhook endpoint, which selects Send-and-Wait validation before normalising an alternate node reference form. Attackers holding an execution's resume token can approve waiting executions meant for others, running downstream actions under the workflow owner's credentials, potentially including command execution. | ||||
| CVE-2026-110698 | 1 Praat | 1 Praat | 2026-10-20 | 6.3 Medium |
| A security vulnerability has been detected in Praat up to 7.0.02. Affected is the function whisper_model_load of the file external/whispercpp/whisper.cpp of the component Model Loader. The manipulation of the argument n_dims leads to out-of-bounds write. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The identifier of the patch is a910d21a2705ef4cd16d91f29cdc8da1ab1a7221. To fix this issue, it is recommended to deploy a patch. The project maintainer confirms: "We did a quick fix (suggested fix 1) for Praat version 7.0.03, and scheduled a better fix (suggested fix 2)." | ||||
| CVE-2026-53354 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: errata: Mitigate TLBI errata on various Arm CPUs A number of CPUs developed by Arm suffer from errata whereby a broadcast TLBI;DSB sequence may complete before the global observation of writes which are translated by an affected TLB entry. These errata ONLY affect the completion of memory accesses which have been translated by an invalidated TLB entry, and these errata DO NOT affect the actual invalidation of TLB entries. TLB entries are removed correctly. This issue has been assigned CVE ID CVE-2025-10263. To mitigate this issue, Arm recommends that software follows any affected TLBI;DSB sequence with an additional TLBI;DSB, which will ensure that all memory write effects affected by the first TLBI have been globally observed. The additional TLBI can use any operation that is broadcast to affected CPUs, and the additional DSB can use any option that is sufficient to complete the additional TLBI. The ARM64_WORKAROUND_REPEAT_TLBI workaround is sufficient to mitigate the issue. Enable this workaround for affected CPUs, and update the silicon errata documentation accordingly. Note that due to the manner in which Arm develops IP and tracks errata, some CPUs share a common erratum number. | ||||
| CVE-2026-110735 | 1 Godotengine | 1 Godot Engine | 2026-10-20 | 2.5 Low |
| Godot Engine through 4.7.2 has a heap out-of-bounds write in the binary resource loader (core/io/resource_format_binary.cpp, ResourceLoaderBinary::get_unicode_string). A string length is read from the resource file into a signed 32-bit integer and compared against the destination buffer size with a signed comparison, which conditionally resizes the buffer. A negative length value skips the resize; the same value is then passed to the copy routine as an unsigned byte count, where it sign-extends to a huge value, copying file-controlled data far past the undersized heap allocation. The defect is reached when the product or an exported game loads a crafted binary resource file (.res). NOTE: the Supplier's position is that the research has identified "no security issues" because the required attacker access is outside of the current Godot Engine threat model. | ||||
| CVE-2026-110606 | 1 Librecad | 2 Libdxfrw, Librecad | 2026-10-20 | 3.3 Low |
| LibreCAD libdxfrw through LC2.2.0 (LibreCAD through 2.2.1.5) contains a stack-based out-of-bounds read vulnerability in dwgReader18::readFileHeader() caused by calling strlen on non-NUL-terminated buffers. Attackers can supply a crafted AC1018, AC1024 or AC1027 DWG file without NUL bytes in the decrypted header to read adjacent stack memory and crash the process. | ||||
| CVE-2016-15060 | 1 Pcman | 1 Ftp Server | 2026-10-20 | 8.3 High |
| A vulnerability was found in PCMan FTP Server up to 2.0.7. This affects an unknown function of the component PORT Command Handler. The manipulation results in buffer overflow. The attack can be launched remotely. The exploit has been made public and could be used. | ||||
| CVE-2026-52917 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: diag: reject stale associations in dump_one path The SCTP exact sock_diag lookup can hold a transport reference, block on lock_sock(sk), and then resume after sctp_association_free() has marked the association dead and freed its bind address list. When that happens, inet_assoc_attr_size() and inet_diag_msg_sctpasoc_fill() can still dereference association state that is no longer valid for reporting. In particular, inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as a real sctp_sockaddr_entry and trigger an out-of-bounds read from unrelated association memory. Reject the association after taking the socket lock if it has been reaped or detached from the endpoint, and report the lookup as stale. This keeps the exact dump-one path from formatting torn association state. | ||||
| CVE-2026-103043 | 2 Alexcorvi, Anchorme Project | 2 Anchorme, Anchorme | 2026-10-20 | 7.5 High |
| anchorme through 3.0.8 contains a regular expression denial of service vulnerability in the IPv6 host extraction regex due to catastrophic backtracking. Attackers can supply specially crafted input strings with repeated patterns to cause exponential regex engine backtracking, blocking the Node.js event loop and denying service to other requests. | ||||
| CVE-2026-98719 | 1 Linux | 1 Linux Kernel | 2026-10-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Nullify "have run CPUs" mask pointer when freeing it Nullify have_run_cpus when freeing the mask, particularly in the error path of __sev_guest_init(), so that KVM doesn't have to subtly use sev->active to track whether or not the mask has been freed. As pointed out by Sashiko, blindly freeing the mask in sev_vm_destroy() results in a double-free if the mask is freed if __sev_guest_init() fails. Throw the logic in a helper as nullifying the pointer is frustratingly difficult and weird due to have_run_cpus being a single-entry array when CPUMASK_OFFSTACK=n. Deliberately don't use CPUMASK_VAR_NULL, as it's not directly assignable when the cpumask is on-stack, e.g. requires using a local variable and a memcpy(), which is beyond ridiculous. Furthermore, while clearing the on-stack bitmask is an unnecessary and arguably unwanted side effect, KVM absolutely relies on '0' being the "null" value given that the struct is zero-allocated. Opportunistically add an alloc() helper to pair with free(); there are just enough call sites to make doing so worthwhile. | ||||
| CVE-2024-58392 | 1 Icculus | 1 Physicsfs | 2026-10-20 | 3.3 Low |
| PhysicsFS through 3.2.0 contains an out-of-bounds read vulnerability in __PHYSFS_utf8codepoint() that allows attackers to read past name buffers via an off-by-one cursor advance on six-octet UTF-8 sequences. Attackers can supply a crafted archive with entry names ending in six-octet sequences, causing PHYSFS_utf8stricmp() and hashing to over-read and crash the application. | ||||
| CVE-2026-109762 | 1 Mozilla | 1 Firefox | 2026-10-20 | 8.8 High |
| Incorrect boundary conditions in the SVG component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. | ||||