Export limit exceeded: 12665 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (12665 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68244 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Do not leak siblings[] on proto context error After a successful BALANCE/PARALLEL_SUBMIT extension on context creation, error during processing of next user extension leaks the siblings[] array. Fix that. Discovered using AI-assisted static analysis confirmed by Intel Product Security. (cherry picked from commit aa65e0a4b51b3b54b53e4142aaa2d997aa1061ff) | ||||
| CVE-2026-68093 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Bump asid_generation on CPU online to avoid ASID collision after hotplug If a vCPU stays scheduled out (or blocked) while the last pCPU it ran on goes through a hotplug cycle (online->offline->online), and the vCPU then resumes execution on the same pCPU, then it is possible for it to run with an ASID that has now been assigned to a different vCPU, resulting in stale TLB translations being used. svm_enable_virtualization_cpu() resets asid_generation to 1 and sets next_asid to max_asid + 1 on every CPU online event, including hotplug cycles. Because next_asid starts beyond the pool boundary, the first call to new_asid() after an online event always wraps the pool, incrementing asid_generation to 2 and assigning ASIDs starting from min_asid. Consider two vCPUs from different VMs, vCPU-A pinned to CPU-X holding asid_generation=2 and ASID=N from before the hotplug event: 1. CPU-X goes offline and back online: asid_generation resets to 1, next_asid = max_asid + 1. 2. One or more vCPUs migrate to CPU-X and call new_asid(), wrapping the pool and consuming ASIDs starting from min_asid. Eventually vCPU-B from a different VM is assigned asid_generation=2, ASID=N — the same ASID that vCPU-A held before the hotplug. 3. vCPU-A enters pre_svm_run() on CPU-X: current_vmcb->cpu is unchanged so the migration branch is skipped. Its saved asid_generation=2 matches sd->asid_generation=2, so the generation check silently passes and vCPU-A continues running with ASID=N — the same ASID just freshly assigned to vCPU-B. Both vCPUs from different VMs now run on CPU-X with the same ASID, causing them to share NPT TLB entries and producing stale translations. The collision manifests as a KVM internal error (Suberror: 1, emulation failure). The NPT page fault reports a faulting GPA far outside the VM's physical memory range — a sign of stale TLB translations being used. KVM falls back to instruction emulation, which fails on FPU/XSave instructions (XRSTOR, STMXCSR) that the emulator does not implement. Fix this by incrementing asid_generation instead of resetting it to 1 in svm_enable_virtualization_cpu(). On module load, asid_generation starts at 0 (memset) and the increment produces 1, identical to the old behaviour. On subsequent hotplug cycles the generation advances beyond any value a vCPU previously observed on this CPU, so the generation check in pre_svm_run() reliably forces new_asid() on every vCPU after every hotplug cycle. | ||||
| CVE-2026-64553 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: psample: fix info leak in PSAMPLE_ATTR_DATA psample open codes nla_put() presumably to avoid wiping the data with 0s just to override it with packet data. This open coding is missing clearing the pad, however, each netlink attr is padded to 4B and data_len may not be divisible by 4B. | ||||
| CVE-2026-101425 | 1 Oracle | 1 Peoplesoft Enterprise Peopletools | 2026-11-06 | 2.5 Low |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: SQR). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows low privileged attacker with logon to the infrastructure where PeopleSoft Enterprise PeopleTools executes to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 2.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:N/A:N). | ||||
| CVE-2026-118394 | 1 Gitea | 1 Gitea | 2026-11-06 | 4.3 Medium |
| The OAuth2 userinfo endpoint (`/login/oauth/userinfo`) decided whether to limit the `groups` claim to public organizations by re-parsing the `Authorization` header as an OAuth2 access token instead of using the scope of the credential that authenticated the request. When a public-only OAuth2 token was sent as a query parameter or form field, or a public-only personal access token was used, that scope came back empty and the claim listed the token owner's private organizations, teams and concealed memberships. The disclosure is limited to the owner's organization and team names and memberships; no repository content is exposed. The endpoint now uses the scope of the authenticating token. | ||||
| CVE-2026-105971 | 2026-11-06 | 5.3 Medium | ||
| The Car Dealer (Dealership) and Vehicle sales WordPress plugin through 4.73 does not restrict its unauthenticated single-listing AJAX action to published content, allowing an unauthenticated attacker to read the title, content and metadata of any private, draft, pending, future or trashed post by supplying its numeric id. | ||||
| CVE-2026-43085 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: initialize nfgenmsg in NLMSG_DONE terminator When batching multiple NFLOG messages (inst->qlen > 1), __nfulnl_send() appends an NLMSG_DONE terminator with sizeof(struct nfgenmsg) payload via nlmsg_put(), but never initializes the nfgenmsg bytes. The nlmsg_put() helper only zeroes alignment padding after the payload, not the payload itself, so four bytes of stale kernel heap data are leaked to userspace in the NLMSG_DONE message body. Use nfnl_msg_put() to build the NLMSG_DONE terminator, which initializes the nfgenmsg payload via nfnl_fill_hdr(), consistent with how __build_packet_message() already constructs NFULNL_MSG_PACKET headers. | ||||
| CVE-2026-101512 | 2 Oracle, Oracle Corporation | 3 Database - Rdbms, Database Server, Oracle Database Server | 2026-11-06 | 6.5 Medium |
| Vulnerability in the RDBMS component of Oracle Database Server. Supported versions that are affected are 23.4.0-23.26.3. Easily exploitable vulnerability allows low privileged attacker having None privilege with network access via HTTP to compromise RDBMS. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all RDBMS accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). | ||||
| CVE-2026-85570 | 1 Wordpress-extensions | 1 Tutor Lms | 2026-11-06 | 4.3 Medium |
| The Tutor LMS WordPress plugin before 4.2.0 does not prevent the correct answers to quiz questions from being included in the page it serves to the student taking the quiz, and does so regardless of the setting intended to control whether answers are revealed, allowing any enrolled student to obtain them before submitting their attempt. | ||||
| CVE-2026-66984 | 2026-11-06 | 3.1 Low | ||
| HCL AION is affected by a vulnerability where certain application responses revealed internal server file system paths. This information could help an attacker understand the application structure and plan further attacks, potentially resulting in unintended behavior or security impact under certain conditions. | ||||
| CVE-2026-121971 | 1 Sensiolabs | 1 Symfony | 2026-11-06 | 7.5 High |
| The component ScopingHttpClient in Symfony HttpClient merges the options of its default scope (such as auth_bearer or auth_basic) into a request before resolving a relative URL against the base_uri, allowing a network-path reference such as "//evil.example/steal" to be sent to another origin together with the default scope’s credentials, and resulting in potential disclosure of those credentials to an attacker-controlled server. This affects Symfony in versions 5.x prior to 5.4.56, 6.x prior to 6.4.50, 7.x prior to 7.4.23, and 8.x prior to 8.1.11. The resolved URL falls outside the origin of the base URI, yet it keeps the merged options, whereas the absolute spelling "https://evil.example/steal" receives none. The same happens with a different port or user-info part on the same host. This is reachable whenever an attacker controls the beginning of a URL passed to a client built with a base_uri and credentials, including those created with HttpClient::createForBaseUri() or configured under framework.http_client.scoped_clients. To solve the issue, after resolving a relative URL against the base URI of the default scope, ScopingHttpClient now compares the scheme and authority of the result with those of the base URI, parsed the way the request is sent. | ||||
| CVE-2026-86795 | 1 Wordpress-extensions | 1 Community Events | 2026-11-06 | 5.3 Medium |
| The Community Events WordPress plugin before 1.6.0 does not have authorisation or nonce checks in one of its AJAX actions, allowing unauthenticated users to retrieve details of event submissions awaiting moderation, which are not available anywhere on the public site. | ||||
| CVE-2024-8612 | 1 Redhat | 3 Advanced Virtualization, Enterprise Linux, Rhel Els | 2026-11-06 | 3.8 Low |
| A flaw was found in QEMU, in the virtio-scsi, virtio-blk, and virtio-crypto devices. The size for virtqueue_push as set in virtio_scsi_complete_req / virtio_blk_req_complete / virito_crypto_req_complete could be larger than the true size of the data which has been sent to guest. Once virtqueue_push() finally calls dma_memory_unmap to ummap the in_iov, it may call the address_space_write function to write back the data. Some uninitialized data may exist in the bounce.buffer, leading to an information leak. | ||||
| CVE-2026-122154 | 1 Purocean | 1 Yank Note | 2026-11-06 | 5.3 Medium |
| A vulnerability was found in purocean Yank Note 3.93.0. This impacts the function config.getAll of the file src/main/server/index.ts of the component Settings Endpoint. The manipulation results in information disclosure. The attack may be launched remotely. The exploit has been made public and could be used. Upgrading to version 3.93.1 will fix this issue. The patch is identified as 59f85d48f17a70a402ad59dcecacdbec20f954df. The affected component should be upgraded. The commit removes the key from the response. | ||||
| CVE-2026-112537 | 1 Apple | 1 Macos | 2026-11-06 | 4 Medium |
| This issue was addressed with improved data protection. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to read sensitive location information. | ||||
| CVE-2024-0340 | 2 Linux, Redhat | 4 Linux Kernel, Enterprise Linux, Rhel Els and 1 more | 2026-11-06 | 4.4 Medium |
| A vulnerability was found in vhost_new_msg in drivers/vhost/vhost.c in the Linux kernel, which does not properly initialize memory in messages passed between virtual guests and the host operating system in the vhost/vhost.c:vhost_new_msg() function. This issue can allow local privileged users to read some kernel memory contents when reading from the /dev/vhost-net device file. | ||||
| CVE-2026-120415 | 1 Undici | 1 Undici | 2026-11-06 | 5.9 Medium |
| undici is an HTTP client for Node.js. In versions 7.0.0 through 7.30.1 and 8.0.0 through 8.12.3, the redirect interceptor strips sensitive headers such as Authorization, Cookie, Proxy-Authorization, and Host when a request is redirected to a different origin, but when request headers are supplied as an array of name and value tuples (a valid documented input, for example from Object.entries), the redirect handler misreads them as a flat list so the header names never match and the sensitive headers are not removed. If a header-normalizing interceptor such as cache or deduplicate is composed outside the redirect interceptor, it then serializes the retained headers onto the cross-origin request, disclosing the caller's origin-bound credentials to the unrelated redirect destination. This is a representation-dependent bypass of the cross-origin header stripping added in CVE-2024-30260. The issue is fixed in undici 7.30.2 and 8.12.4, and users should upgrade to one of those versions or later. As a workaround, supply request headers as a plain object or a flat name and value array rather than an array of tuples, or compose the redirect interceptor outside the normalizing interceptor. | ||||
| CVE-2026-89298 | 1 Redhat | 3 Build Keycloak, Build Of Keycloak, Red Hat Single Sign On | 2026-11-06 | 4.9 Medium |
| A flaw was found in the Dynamic Client Registration service of Keycloak, an open-source identity and access management solution. The issue occurs when a user with the view-clients role accesses the client registration endpoint to retrieve client details. Due to a failure to mask sensitive information, the service returns the client's confidential secret in cleartext. This could allow a read-only administrator to obtain full access to the affected client's account and potentially escalate their privileges within the realm. | ||||
| CVE-2026-121821 | 1 Ly Corporation | 1 Armeria | 2026-11-06 | N/A |
| A vulnerability has been identified in armeria versions 0.84.0 through 1.42.0, where any-origin CORS policies do not enforce configured path restrictions, allowing an attacker-controlled website visited by an authenticated victim to read sensitive responses from excluded paths when credentials are enabled and the victim's browser sends authentication credentials. | ||||
| CVE-2026-116593 | 1 Apache | 1 Kafka | 2026-11-06 | 8.1 High |
| Apache Kafka Connect has the /connector-plugins/{connector-type}/config/validate endpoint on its REST API to validate connector configurations. Apache Kafka Connect also support Configuration Providers which enable to hide the values of sensitive configuration and only resolve them at runtime. An attacker with access to the validate endpoint can use it to resolve and return plaintext values via any of the configuration providers installed on a Connect worker. Users are recommended to upgrade to version 4.2.2, 4.3.2, 4.4.0 or above, which fix this issue. | ||||