Export limit exceeded: 26153 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26153 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74623 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: atlantic: free stranded TX buffers on ring deinit aq_vec_deinit() drains the TX rings with a single aq_ring_tx_clean() call, which frees at most AQ_CFG_TX_CLEAN_BUDGET (256) descriptors and stops at hw_head, which no longer moves once aq_vec_stop() has stopped the hardware and NAPI. Completed descriptors beyond the budget and everything still posted in [hw_head, sw_tail) keep their skb or xdp_frame when the interface goes down: aq_vec_ring_free() then frees the buffer ring and the references are lost for good. Today this is a silent memory leak on every interface down under TX/XDP_TX load. With the conversion of the RX path to page_pool posted for net-next it becomes much more visible: XDP_TX frames carry fragment references on the RX ring's page_pool, so a single stranded frame keeps the pool's inflight count above zero forever. page_pool_destroy() then never completes, the pool is leaked together with its pages, and "page_pool_release_retry() stalled pool shutdown" is warned every 60 seconds from that point on, on every ifdown, XDP detach or ring resize under XDP_TX load. Bring back aq_ring_tx_deinit() as it was before the removal and use it for teardown again, with one extension: TX rings can hold xdp_frames nowadays, so release those too. They are returned with xdp_return_frame() since this runs in process context. | ||||
| CVE-2026-74622 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: atlantic: free RX pages of consumed but not refilled buffers aq_ring_rx_deinit() only walks [sw_head, sw_tail), the region posted to hardware. Since the page reuse strategy was added, a cleaned RX buffer keeps its page (and its DMA mapping) in the ring for reuse, and refill is batched: aq_ring_rx_fill() returns early until AQ_CFG_RX_REFILL_THRES slots are free. Slots that were consumed but not yet reposted therefore sit in the complementary [sw_tail, sw_head) gap with a live page, and the deinit walk never visits them: up to a refill batch worth of pages and DMA mappings leak on every interface down. Walk the whole ring instead and release whatever is still there. Also bail out if the buffer ring is already gone: a partial aq_ptp_ring_alloc() failure frees the ring but leaves aq_nic set, so aq_ptp_ring_deinit() still gets here on the unwind path. | ||||
| CVE-2026-74620 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_gact, act_police: range check the fallback control action tcf_action_check_ctrlact() range checks the primary control action: if (!opcode) ret = action > TC_ACT_VALUE_MAX ? -EINVAL : 0; TC_ACT_VALUE_MAX is TC_ACT_TRAP, so kernel-internal verdicts above it cannot be set that way. But act_gact and act_police each carry a second, independent control action supplied by user space that never reaches that helper - TCA_GACT_PROB.paction and TCA_POLICE_RESULT. Both only reject TC_ACT_GOTO_CHAIN, so any other value is stored verbatim and returned verbatim from the action. In particular user space can store TC_ACT_CONSUMED, which is TC_ACT_VALUE_MAX + 1 and is deliberately not part of the UAPI value range. That verdict tells every caller the action took ownership of the skb, so nobody frees it: sch_handle_ingress(), sch_handle_egress() and tcf_qevent_handle() all deliberately skip the free for it. The result is one leaked sk_buff plus its data buffer per packet traversing the filter, unbounded, for all traffic on the chain including kernel-generated packets. Both are trivially deterministic. act_gact clamps tcfg_pval to >= 1, so with pval = 1 gact_determ() returns the fallback for every packet. act_police has no mandatory rate, so rate = 0 leaves tcfp_mtu = ~0 and tcf_police_mtu_check() always passes. TC_ACT_CONSUMED was added by commit 720f22fed81b ("net: sched: refactor reinsert action"), after both goto-chain guards were written: commit 9469f375ab09 ("net/sched: act_gact: disallow 'goto chain' on fallback control action") and commit c08f5ed5d625 ("net/sched: act_police: disallow 'goto chain' on fallback control action"). Neither guard was widened when the new verdict appeared. Factor the existing range test out of tcf_action_check_ctrlact() as tcf_action_valid() and apply it to both fallbacks. The helper cannot call tcf_action_check_ctrlact() directly because that also allocates a goto_chain, which is exactly what these two sites must not do. Reproduced on v7.2-rc6: kmemleak reports one leaked 232-byte skbuff_head_cache object plus its 704-byte data buffer per packet. With this patch both configurations are rejected with -EINVAL and kmemleak reports none. | ||||
| CVE-2026-74599 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/ptdump: always stabilise against page table freeing using init_mm Previous commits have established the invariant that kernel page table freeing is performed while an mmap read lock on init_mm is held, which fixes races between ptdump and kernel page table freeing over init_mm. However, x86 and arm64 can perform a ptdump over an mm other than init_mm via ptdump_walk_pgd() and since kernel memory ranges are shared across non-kernel mm's, this means that the race still exists for these cases. Fix this by acquiring a nested mmap write lock for init_mm in ptdump_walk_pgd(). This is safe as we take this after mmap write locking the mm, and nothing acquires the init_mm lock first before locking an arbitrary mm, so no deadlock is possible. Also update walk_page_range_debug() to assert that init_mm is write locked, add a comment explaining why and remove some redundant code, and eliminate the unnecessary and confusing invocation of walk_kernel_page_table_range(). We can safely remove the non-NULL check for walk.mm, as the mmap lock asserts would NULL pointer deref if it was (and of course no callers do this). The first point at which ptdump can race kernel page table freeing is commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table"), so we target this in the Fixes tag. | ||||
| CVE-2026-74585 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Bound the DROM dual link port number before indexing sw->ports tb_drom_parse_entry_port() validates the device-supplied header->index against sw->config.max_port_number before indexing sw->ports[], but the sibling field entry->dual_link_port_nr -- a 6-bit value also read from the DROM -- indexes the same array with no such check. A malicious or malformed Thunderbolt device can set dual_link_port_nr beyond the allocated sw->ports[] (max_port_number + 1 entries), producing an out-of-bounds tb_port pointer that is stored and later dereferenced. Reject a port entry whose dual_link_port_nr exceeds max_port_number, the same bound already applied to header->index. | ||||
| CVE-2026-74577 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: mpls: initialize rtm_tos in mpls_getroute() mpls_getroute() builds the RTM_NEWROUTE reply to an RTM_GETROUTE request by filling a struct rtmsg allocated from an skb whose data area is not zeroed (alloc_skb(NLMSG_GOODSIZE, ...)). It sets every field of the header except rtm_tos: r = nlmsg_data(nlh); r->rtm_family = AF_MPLS; r->rtm_dst_len = 20; r->rtm_src_len = 0; r->rtm_table = RT_TABLE_MAIN; r->rtm_type = RTN_UNICAST; r->rtm_scope = RT_SCOPE_UNIVERSE; r->rtm_protocol = rt->rt_protocol; r->rtm_flags = 0; struct rtmsg has no padding, so the one uninitialised byte rtm_tos (offset 3) is copied straight to user space on recvmsg(), leaking a byte of uninitialised heap memory. This is in contrast to mpls_dump_route(), which fills the very same header and does set rtm_tos = 0. Initialize rtm_tos to 0, matching mpls_dump_route(). Reproduced with KMSAN by adding an MPLS route and issuing a non-RTM_F_FIB_MATCH RTM_GETROUTE for its label: BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x36c/0x33f0 _copy_to_iter+0x36c/0x33f0 __skb_datagram_iter+0x196/0x12c0 skb_copy_datagram_iter+0x5b/0x210 netlink_recvmsg+0x37b/0xef0 ... Uninit was created at: __alloc_skb+0x8ca/0x10e0 mpls_getroute+0x1280/0x3a40 rtnetlink_rcv_msg+0x1138/0x15a0 ... Byte 19 of 64 is uninitialized (byte 19 = nlmsghdr(16) + rtmsg offset 3 = rtm_tos) | ||||
| CVE-2026-74566 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: keys: make keyring key-chunk byte order agree with keyring_diff_objects() keyring_get_key_chunk() loads description bytes into the index chunk low address first, while keyring_diff_objects() numbers the first differing bit from the low end and folds the absolute byte index into the level without removing the inline-prefix offset the level already carries. The two disagree on byte order and bit position, so the array can be told two keys first differ at a bit that does not differ in the chunk the walker uses, letting crafted descriptions collide into one node. Load the chunk in the order keyring_diff_objects() assumes and drop the inline-prefix length when folding the byte index into the level. This only changes the in-memory ordering used to place keys within a keyring; add, search and read of non-colliding keys are unaffected. | ||||
| CVE-2026-74547 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread When userspace configures 'auto_update_interval' to 0 via sysfs, the background kthread executes schedule_timeout_interruptible(0), which returns immediately. If 'num_temp_sensors' is concurrently or previously set to 0, the msleep_interruptible() delay inside adt7470_read_temperatures() also becomes 0. This combination forces the background thread into a tight, unbounded busy-loop, hogging the CPU and flooding the I2C bus with a continuous stream of transactions. Fix this vulnerability by raising the lower limit of the clamp_val in auto_update_interval_store() from 0 to 500 milliseconds. This guarantees a reasonable minimum sleep window between sensor updates, protecting the system from intentional or accidental I2C bus denial of service. | ||||
| CVE-2026-74546 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix divide-by-zero TOCTOU crash in fan speed read If the fan data becomes 0 between the FAN_DATA_VALID() check and the FAN_PERIOD_TO_RPM() conversion, it will result in a divide-by-zero crash due to a race with a concurrent update of the cached fan value. Fix a TOCTOU issue by reading fan data once. | ||||
| CVE-2026-74543 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: udp_tunnel: fix memory leak in udp_tunnel_nic_unregister() syzbot reported a memory leak [1] in the UDP tunnel NIC offload code. When device registration fails (e.g. in register_netdevice()), netdev core unwinds by sending a single NETDEV_UNREGISTER notification. If work was queued during NETDEV_REGISTER (utn->work_pending is set), udp_tunnel_nic_unregister() returns early: if (utn->work_pending) return; Because failed registrations do not enter netdev_wait_allrefs_any(), no subsequent NETDEV_UNREGISTER rebroadcast will ever occur. As a result, the struct udp_tunnel_nic allocated in udp_tunnel_nic_alloc() is leaked permanently. Fix this by removing the early return. Instead, synchronously cancel any pending work with cancel_delayed_work_sync() before freeing @utn. To be able to call cancel_delayed_work_sync() while holding RTNL (the work also needs RTNL), switch udp_tunnel_nic_device_sync_work() to rtnl_trylock(). If RTNL is contended, requeue the work with a 1 jiffy delay (via queue_delayed_work()) to prevent high CPU contention while waiting for RTNL lock. The utn->work_pending bookkeeping is no longer needed and is removed, as the workqueue core already tracks the pending/running state of the work. [1] BUG: memory leak unreferenced object 0xffff888127d5f840 (size 96): comm "syz-executor", pid 5806, jiffies 4294942188 backtrace (crc 99fdb6c8): __kmalloc_noprof+0x3bf/0x550 udp_tunnel_nic_alloc net/ipv4/udp_tunnel_nic.c:756 [inline] udp_tunnel_nic_register net/ipv4/udp_tunnel_nic.c:833 [inline] udp_tunnel_nic_netdevice_event+0x804/0xab0 net/ipv4/udp_tunnel_nic.c:931 notifier_call_chain+0x59/0x160 kernel/notifier.c:85 call_netdevice_notifiers_info+0x7d/0xb0 net/core/dev.c:2250 register_netdevice+0xc10/0xeb0 net/core/dev.c:11478 | ||||
| CVE-2026-74505 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: Fix UAF at error handling during probe Although 6fire driver had a few fixes for dealing with the early error handling during the probe phase, it forgot a pending URB before freeing the resources, which may lead to a UAF. This patch addresses it by doing the almost same cleanup procedure like the normal disconnect phase at the error path. | ||||
| CVE-2026-74499 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write in snd_usbmidi_akai_output() snd_usbmidi_akai_output() computes its fill-loop bound buf_end = ep->max_transfer - MAX_AKAI_SYSEX_LEN - 1; as a signed int, so a small device-advertised bulk-OUT max_transfer makes buf_end negative. The loop guard then compares the u32 urb->transfer_buffer_length against that negative int: the usual arithmetic conversion turns buf_end into a large unsigned value, so the guard stays true and each iteration keeps appending SysEx framing and payload bytes past the end of the URB transfer buffer, which is only max_transfer bytes long. A USB device that advertises a tiny bulk-OUT endpoint can therefore trigger an attacker-length- and content-controlled heap out-of-bounds write when a process writes to the created /dev/snd/midiC*D* node. Return early when there is no room for even one SysEx, so the loop is never entered with a bound that would wrap. The loop is the last statement of the function, so bailing out is equivalent to it not running. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74498 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix DMA buffer out-of-bounds write when fill_max is set When a USB audio endpoint requests full packet transfers via the fill_max descriptor flag, data_ep_set_params() promotes ep->curpacksize to ep->maxpacksize. However, maxsize is left at the original sample-rate derived value. Since u->buffer_size is allocated as maxsize * packets, the resulting DMA buffer is far too small for the requested transfer length. When the USB host controller streams up to curpacksize bytes per packet, it writes past the end of the buffer via DMA, corrupting kernel heap memory. Update maxsize to curpacksize when fill_max is set so that the allocated DMA buffer size matches the actual transfer request size. [ changed to reassign maxsize only when ep->fill_max is set -- tiwai ] | ||||
| CVE-2026-74487 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: restore write access when removing an entry Registering an entry with the MISC_FMT_OPEN_FILE flag opens the interpreter via open_exec() which denies write access to it for as long as the entry exists. Removing the entry closes the interpreter file via filp_close() but never restores write access, leaving the inode's i_writecount permanently negative. Opening the interpreter for writing keeps failing with ETXTBSY long after the entry is gone until the inode is evicted from the inode cache. Commit 90f601b497d7 ("binfmt_misc: restore write access before closing files opened by open_exec()") fixed the same imbalance in the error path of bm_register_write() but the actual removal path has been leaking the write denial since the introduction of the flag. Restore write access in put_binfmt_handler() before closing the interpreter file. | ||||
| CVE-2026-74486 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: use exe_file_deny_write_access() for the interpreter clone For MISC_FMT_OPEN_FILE entries load_misc_binary() clones the registered interpreter file and denies write access to the clone via plain deny_write_access(). The clone is installed as bprm->interpreter and later released by the exec machinery through exe_file_allow_write_access() which skips the i_writecount increment for files with FMODE_FSNOTIFY_HSM set. The deny and allow side can therefore come to different conclusions when pre-content watches are in play: if a pre-content watch is added to the interpreter after registration every subsequent exec through that entry takes a write denial on the clone that is never paired with a write allowance, driving the interpreter inode's i_writecount further down with each exec and leaving the interpreter unwritable even after the entry and all its users are gone. Take the write denial via exe_file_deny_write_access() so both sides of the pairing base their decision on the same file mode, and propagate failure instead of silently ignoring it: an interpreter that is concurrently open for writing now fails the exec with ETXTBSY, exactly like an interpreter freshly opened via open_exec() would. | ||||
| CVE-2026-74484 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: don't let an 'F' entry pin its own instance An entry registered with 'F' opens its interpreter at registration time and holds that file until the entry is freed. Any entry nobody removes by hand only gets closed once the binfmt_misc superblock is shut down. If the interpreter lives on a mount that keeps that superblock alive the two pin each other: binfmt_misc sb -> inode -> entry -> interp_file -> vfsmount -> binfmt_misc sb TL;DR the file is never closed. Once the mount namespace is gone there is nothing left to unregister through either. There are two ways to trigger this bug: - Point the interpreter at the instance itself. Its files are regular files owned by the mounter and both bm_get_inode() and simple_fill_super() leave i_op at empty_iops. So notify_change() falls back to simple_setattr() and chmod +x works. We never set SB_I_NOEXEC and so open_exec() accepts it. - Use the instance as an overlayfs lower layer. The overlay superblock holds a clone_private_mount() of every layer until it is destroyed and that clone is in no namespace. So umount_tree() never reaches it. That's a DoS. And it isn't only the superblock that leaks. It pins the user namespace it was mounted in, so every iteration permanently eats one of the caller's user namespace charges. So let's just do the sane thing. SB_I_NOEXEC makes open_exec() fail on the instance's own files and s_stack_depth makes overlayfs reject the layer before it ever takes a clone. That also covers the ecryptfs and fuse passthrough variants. What 'F' promises is unchanged. The stable tag is narrower than the Fixes tags on purpose. Before sandboxed mounts this needed global root against the single instance everyone shares, and the change doesn't apply to those trees anyway. Note that SB_I_NODEV is implicitly raised for userns mounts but raise it explicitly here as well. | ||||
| CVE-2026-74464 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix skb leak on flow key update failure during ct ovs_ct_execute() always steals or frees the skb on failure while ovs_flow_key_update() does not. So, if it fails and we return right away, the skb ends up leaked. Fix that by breaking instead and letting the common error handling code at the bottom of the loop to free the skb properly. This is a very unlikely scenario as it requires the packet to become unparseable by applying a set of actions on a previously parseable skb, but should be fixed nevertheless. Reported by Sashiko. | ||||
| CVE-2026-74460 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: ems_usb: validate CPC message lengths ems_usb_read_bulk_callback() walks CPC messages packed in one USB receive buffer. Check that each declared message fits in the URB payload. Also require the type-specific payload to cover the fields used by the CAN, state, error and overrun handlers. | ||||
| CVE-2026-74458 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents The wait and bulk receive paths walk variable-length commands from a USB buffer. A nonzero command shorter than CMD_HEADER_LEN can still be dispatched, and the wait path copies a matching command into a fixed caller-owned struct kvaser_cmd using the device-provided length. Reject nonzero commands that do not contain the fixed header or that extend beyond the current USB buffer item. In the wait path, also reject a matching command that exceeds the destination before copying it. | ||||
| CVE-2026-74457 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: add bounds check for USB channel index The channel control index ctrl_idx is derived from rx->len which comes directly from a device USB payload. The mask 0x0f allows values 0-15, but the array size of usb_if->dev[] is only 2. Values 2-15 cause heap out-of-bounds read, eventually causing kernel panic in the IRQ context. Add bounds checking for ctrl_idx before the array access in both pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error(). | ||||