Export limit exceeded: 54489 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (54489 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-102712 | 1 Eclipse | 1 Netx Duo | 2026-11-04 | N/A |
| In Eclipse ThreadX NetX Duo versions up to and including 6.5.2.202603, built with DTLS server support, the NetX Secure DTLS server's ClientHello parser reads the session ID, cookie and ciphersuite list without bounding them by the bytes remaining in the message. An unauthenticated peer can send a ClientHello declaring fields longer than the message and make the server read past it; nothing read is sent back to the peer, and the read can fault the server only on targets that trap the address beyond the buffer. | ||||
| CVE-2026-102728 | 1 Eclipse | 1 Netx Duo | 2026-11-04 | 7.5 High |
| In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the NetX Secure TLS client's ServerHello parser and DTLS client's HelloVerifyRequest parser read fields before checking that the message is long enough to contain them. A malicious server or an on-path attacker can make the client read up to three bytes past a handshake message, which can fault the client on targets with memory protection. | ||||
| CVE-2026-102726 | 1 Eclipse | 1 Netx Duo | 2026-11-04 | N/A |
| In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the PPP IPCP code parses a peer's Configure-Nak without validating each option's length. A malicious PPP peer can stall the PPP thread indefinitely with a zero-length option, taking the link down, and can read back up to four bytes of packet-buffer memory per exchange with a short address option. | ||||
| CVE-2026-102725 | 1 Eclipse | 1 Netx Duo | 2026-11-04 | N/A |
| In Eclipse ThreadX NetX Duo versions 6.4.0 through 6.5.2.202603a, built with VLAN and SRP support, the MSRP parser uses the attribute list length from the received frame without comparing it with the packet length. An unauthenticated station on the same Layer 2 segment can send a short MSRP frame declaring a long list and make the MRP worker read far past the received packet, faulting it on targets with memory protection. | ||||
| CVE-2026-58988 | 1 Google | 1 Android | 2026-11-04 | 4 Medium |
| In isValid of ShimConverter.cpp, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-102721 | 1 Eclipse | 1 Netx Duo | 2026-11-04 | N/A |
| In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the TFTP client copies the message of a received ERROR packet without bounding the copy by the end of the datagram, and the TFTP server reads one byte past a minimal ERROR packet. A malicious TFTP server can make the client copy up to 64 bytes of adjacent packet-pool memory into the error string the application retrieves, or fault on targets with memory protection. | ||||
| CVE-2026-111038 | 1 Coupa | 1 Coupa Total Spend Management Platform | 2026-11-04 | N/A |
| CSV formula injection vulnerability in the export functionality of the Coupa Supplier Portal SaaS platform. The vulnerability arises because certain user-controlled data, such as event names or templates within the Tenders module, are not properly validated or sanitised before being included in CSV files generated by the application. An attacker with low privileges can input specially crafted values that begin with characters interpreted as formulas by spreadsheet applications. When a victim downloads and opens the generated file in a compatible client, the content may be interpreted as a formula, potentially leading to unauthorised actions such as the execution of commands via mechanisms such as DDE, access to information, or interaction with system resources under the victim’s context. | ||||
| CVE-2026-102720 | 1 Eclipse | 1 Threadx Netx Duo | 2026-11-04 | N/A |
| In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the DHCP client's option walk advances its offset one byte less than its read pointer for every option it skips. A DHCP server, or any host on the link that answers first, can make the client read up to about a kilobyte past the received message, and the same walk copies out-of-bounds bytes into the application's buffer when it retrieves a user option. | ||||
| CVE-2026-58966 | 1 Google | 1 Android | 2026-11-04 | 8.4 High |
| In multiple functions of hppsfilter.c, there is a possible out-of-bounds write due to a stack buffer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-102711 | 1 Eclipse | 1 Threadx/threadx | 2026-11-04 | N/A |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the Module Manager loaders take a module image without its length and trust the sizes and offsets in its preamble. A crafted module image can declare a code size larger than the image to read, or gain access to, the memory that follows it, and can place its entry points outside its code. | ||||
| CVE-2026-87041 | 1 Zephyrproject | 1 Zephyr | 2026-11-04 | 7.8 High |
| The RTIO submission-queue verifier rtio_vrfy_sqe() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) accumulated the results of K_SYSCALL_MEMORY() into its valid_sqe flag with &=. That macro returns nonzero on failure (it is built on K_SYSCALL_VERIFY_MSG(), which yields !(expr)), so every buffer permission check contributed the opposite of its result. A submission whose tx.buf, rx.buf or txrx.tx_buf/txrx.rx_buf pointer was not accessible to the calling thread was accepted, while a legitimate, thread-owned buffer caused the calling thread to be killed with a kernel oops. The verifier runs on behalf of the rtio_sqe_copy_in_get_handles() system call (also reached through the inline rtio_sqe_copy_in() wrapper), so it is driven directly by untrusted user-mode input on any image built with CONFIG_USERSPACE. A user thread that has been granted an RTIO context and an rtio_iodev object — the intended usage of RTIO userspace support, established via rtio_access_grant() — can submit an SQE whose buffer pointer and length name arbitrary kernel memory; the object check on sqe->iodev is unaffected and still passes, and the crafted SQE is forwarded to the bus driver unchanged. Downstream consumers dereference the pointer with supervisor privilege. The generic I2C and I3C RTIO fallback handlers (drivers/i2c/i2c_rtio_default.c, drivers/i3c/i3c_rtio_default.c) copy sqe.rx.buf/sqe.tx.buf into struct i2c_msg and call i2c_transfer(), and the vendor SPI/I2C RTIO drivers behave equivalently. An RTIO_OP_RX submission therefore has peripheral data written into kernel memory of the attacker's choosing (arbitrary kernel write), an RTIO_OP_TX submission clocks kernel memory out over the bus (kernel memory disclosure), and a pointer to unmapped memory faults the kernel. This is a full escape from the user-mode isolation boundary that CONFIG_USERSPACE exists to enforce. The defect was masked for years because the in-tree user-mode RTIO tests only exercise RTIO_OP_NOP and mempool-backed reads, neither of which reaches the affected checks. The fix negates each K_SYSCALL_MEMORY() result and additionally validates the TXRX transmit buffer read-only, matching the SPI, I2C and I3C handlers. | ||||
| CVE-2026-120631 | 2026-11-04 | 7.5 High | ||
| CGI::Cookie versions from 4.67 before 5.00 for Perl allow denial of service via the client cookie expires value used as a regex in parse. CGI's cookie method reads the Cookie request header through parse, which interpolates the header's expires value unescaped into the substitution pattern that removes it from the cookie string. A client can make the request die with an invalid pattern, or tie up the process with one that backtracks catastrophically. | ||||
| CVE-2026-120632 | 2026-11-04 | 5.3 Medium | ||
| CGI versions before 5.00 for Perl allow CPU exhaustion via a backtracking regex on the XForms multipart/related Content-Type. When a POST Content-Type contains multipart/related, the boundary and start parameters are extracted with an unanchored pattern that puts .+ on either side of the boundary capture, which backtracks in cubic time on a header that does not match. No request body is needed. | ||||
| CVE-2026-120638 | 2026-11-04 | 6.1 Medium | ||
| CGI versions before 5.00 for Perl allow open redirects via HTML entity decoding of the URL after application validation in redirect. redirect decodes HTML entities in its URL before writing the Location header, so a URL the application has already validated can change meaning. For example, //evil.example/ becomes //evil.example/ and sends the user to another host. | ||||
| CVE-2026-120639 | 2026-11-04 | 6.5 Medium | ||
| CGI versions before 5.00 for Perl allow HTTP header injection via entity decoding after the newline check in header and unchecked values in multipart_start and do_push. With autoEscape off, header decodes HTML entities in extra header values after its newline check, so an encoded CR or LF reaches the response. multipart_start does not check header values for newlines, and do_push does not check the type it prints in each part. An application that passes request data into these header values can be made to add headers or split the response. | ||||
| CVE-2026-120644 | 2026-11-04 | 4.3 Medium | ||
| CGI::Cookie versions before 5.00 for Perl allow cookie attribute injection via unvalidated path, domain and expires values. The path, domain and expires values are written into the Set-Cookie header without checking for semicolons or control characters. An application that sets them from request data can be made to add other cookie attributes, such as Domain or SameSite. | ||||
| CVE-2026-120642 | 2026-11-04 | 8.1 High | ||
| CGI versions before 5.00 for Perl return request-derived values untainted under taint mode. The upload filename, uploadInfo values, some path_info and script_name values, Accept results, and the name lists from url_param and cookie are returned without the taint flag, as is a cookie named expires from 4.67 on. These values come from regex captures or hash keys, which Perl does not taint, so they pass -T checks unvalidated. | ||||
| CVE-2026-120645 | 2026-11-04 | 5.3 Medium | ||
| CGI versions before 5.00 for Perl allow denial of service via submitted values used as a regex for optgroup selection in scrolling_list. When rendering option groups, scrolling_list marks the selected options by interpolating each selected value, by default taken from the request parameters, unescaped into a substitution pattern. A client can make the request die with an invalid pattern, or tie up the process with one that backtracks heavily. | ||||
| CVE-2026-120646 | 2026-11-04 | 7.5 High | ||
| CGI versions from 4.71 before 5.00 for Perl allow denial of service via a plain string dereferenced as a symbolic reference in uploadInfo. uploadInfo dereferences its argument and calls its filename method without checking that it is an upload filehandle. A plain string naming a defined global variable, such as the parameter value from ?upload=0, is treated as a symbolic reference, and the method call on it dies. | ||||
| CVE-2026-120647 | 2026-11-04 | 4.3 Medium | ||
| CGI versions before 5.00 for Perl allow Content-Disposition parameter injection via unescaped double quotes in the header attachment filename. header(-attachment => $name) writes $name into the quoted filename parameter of Content-Disposition without escaping double quotes. An application that passes request data as the attachment name can be made to send a second filename parameter, changing the name the response is saved under. | ||||