Export limit exceeded: 30033 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (30033 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74673 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: evdev - fix information leak in evdev_pass_values() In evdev_pass_values(), the input_event structure is allocated on the kernel stack and populated field-by-field. However, it is never fully initialized. On architectures where struct input_event contains explicit or implicit padding (such as the 32-bit __pad field on SPARC64), these padding bytes are left uninitialized. When this event structure is subsequently passed to the client buffer and later copied to userspace, the uninitialized padding bytes leak kernel stack memory, potentially exposing sensitive information. Similar issues exist in __evdev_queue_syn_dropped and __pass_event. Fix this by explicitly zeroing the entire event structure with memset() before populating its fields. This ensures all padding bytes are cleared before the data crosses the security boundary. | ||||
| CVE-2026-74290 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flow: Dont expose folded kernel pointers The flow classifier falls back to addr_fold() for fields that are missing from packet headers. In map mode, userspace controls mask, xor, rshift, addend and divisor, and can observe the resulting classid through class statistics. This allows a tc classifier in a user/network namespace to recover the 32-bit folded value of skb->sk, skb_dst() or skb_nfct(). Align with standard kernel practices for pointer hashing and replace the XOR folding with a keyed siphash (which is cryptographically secure) | ||||
| CVE-2026-74265 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: initialize gdma queue id to INVALID_QUEUE_ID mana_gd_create_mana_wq_cq() leaves queue->id as 0 (from kzalloc_obj()) until mana_create_wq_obj() assigns the firmware-returned id. If creation fails before that, cleanup calls mana_gd_destroy_cq() with id 0, NULLing gc->cq_table[0] and silently breaking whichever real CQ owns that slot. Initialize queue->id to INVALID_QUEUE_ID right after allocation, matching mana_gd_create_eq(). The existing (id >= max_num_cqs) guard then short-circuits cleanly. | ||||
| CVE-2026-72481 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: magnetometer: ak8975: fix potential kernel stack memory leak Currently in the AK8975 driver there are four instances where potential uninitialized kernel stack memory leaks can occur. If i2c_smbus_read_i2c_block_data_or_emulated() returns a value less than the size of the buffer, uninitialized bytes are retained in the buffer and later the buffer is passed on to IIO buffers, potentially leaking memory to userspace. Fix this by adding checks whether the return value of the function is equal to the size of the buffer and subsequently if the value is lesser than zero to distinguish from a returned error code. | ||||
| CVE-2026-72305 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: VDUSE: avoid leaking information to userspace The bounceing is not necessarily page aligned, so current VDUSE can leak kernel information through mapping bounce pages to userspace. Allocate bounce pages with __GFP_ZERO to avoid leaking information to userspace. | ||||
| CVE-2026-68480 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Make Safe-RET robust against interrupt injection An attacker injecting interrupts while the Safe-RET mitigation executes on machines affected by SRSO can neutralize the safe return sequence, potentially leading to data leakage through speculative execution. Fixup register state as if the Safe-RET sequence executed successfully by "emulating" it, in a manner of speaking, and avoid executing a RET instruction after returning from the interrupt. | ||||
| CVE-2026-68247 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/bios: range check LFP Data Block panel_type2 While the panel_type from LFP Data Block is range checked, panel_type2 is not. Add a few helpers for range checking, and use them to not only check panel_type2, but also improve clarity and correctness in the panel type selection. Discovered using AI-assisted static analysis confirmed by Intel Product Security. v2: - Fix commit message typo (Michał) - Add is_panel_type_pnp() (Ville) (cherry picked from commit c9ebe5d2f25729d6cfbbb1235d640bf67f9275df) | ||||
| CVE-2026-68244 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Do not leak siblings[] on proto context error After a successful BALANCE/PARALLEL_SUBMIT extension on context creation, error during processing of next user extension leaks the siblings[] array. Fix that. Discovered using AI-assisted static analysis confirmed by Intel Product Security. (cherry picked from commit aa65e0a4b51b3b54b53e4142aaa2d997aa1061ff) | ||||
| CVE-2026-68093 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Bump asid_generation on CPU online to avoid ASID collision after hotplug If a vCPU stays scheduled out (or blocked) while the last pCPU it ran on goes through a hotplug cycle (online->offline->online), and the vCPU then resumes execution on the same pCPU, then it is possible for it to run with an ASID that has now been assigned to a different vCPU, resulting in stale TLB translations being used. svm_enable_virtualization_cpu() resets asid_generation to 1 and sets next_asid to max_asid + 1 on every CPU online event, including hotplug cycles. Because next_asid starts beyond the pool boundary, the first call to new_asid() after an online event always wraps the pool, incrementing asid_generation to 2 and assigning ASIDs starting from min_asid. Consider two vCPUs from different VMs, vCPU-A pinned to CPU-X holding asid_generation=2 and ASID=N from before the hotplug event: 1. CPU-X goes offline and back online: asid_generation resets to 1, next_asid = max_asid + 1. 2. One or more vCPUs migrate to CPU-X and call new_asid(), wrapping the pool and consuming ASIDs starting from min_asid. Eventually vCPU-B from a different VM is assigned asid_generation=2, ASID=N — the same ASID that vCPU-A held before the hotplug. 3. vCPU-A enters pre_svm_run() on CPU-X: current_vmcb->cpu is unchanged so the migration branch is skipped. Its saved asid_generation=2 matches sd->asid_generation=2, so the generation check silently passes and vCPU-A continues running with ASID=N — the same ASID just freshly assigned to vCPU-B. Both vCPUs from different VMs now run on CPU-X with the same ASID, causing them to share NPT TLB entries and producing stale translations. The collision manifests as a KVM internal error (Suberror: 1, emulation failure). The NPT page fault reports a faulting GPA far outside the VM's physical memory range — a sign of stale TLB translations being used. KVM falls back to instruction emulation, which fails on FPU/XSave instructions (XRSTOR, STMXCSR) that the emulator does not implement. Fix this by incrementing asid_generation instead of resetting it to 1 in svm_enable_virtualization_cpu(). On module load, asid_generation starts at 0 (memset) and the increment produces 1, identical to the old behaviour. On subsequent hotplug cycles the generation advances beyond any value a vCPU previously observed on this CPU, so the generation check in pre_svm_run() reliably forces new_asid() on every vCPU after every hotplug cycle. | ||||
| CVE-2026-64553 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: psample: fix info leak in PSAMPLE_ATTR_DATA psample open codes nla_put() presumably to avoid wiping the data with 0s just to override it with packet data. This open coding is missing clearing the pad, however, each netlink attr is padded to 4B and data_len may not be divisible by 4B. | ||||
| CVE-2026-53287 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: audit: fix incorrect inheritable capability in CAPSET records __audit_log_capset() records the effective capability set into the inheritable field due to a copy-paste error. Every CAPSET audit record therefore reports cap_pi (process inheritable) with the value of cap_effective instead of cap_inheritable. This silently corrupts audit data used for compliance and forensic analysis: an attacker who modifies inheritable capabilities to prepare for a privilege-escalating exec would have the change masked in the audit trail. The bug has been present since the original introduction of CAPSET audit records in 2008. | ||||
| CVE-2026-53283 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Bounds-check devid in __rlookup_amd_iommu() iommu_device_register() walks every device on the PCI bus via bus_for_each_dev() and calls amd_iommu_probe_device() for each. The inlined check_device() path computes the device's sbdf, calls rlookup_amd_iommu() to find the owning IOMMU, and only afterwards verifies devid <= pci_seg->last_bdf. __rlookup_amd_iommu() indexes rlookup_table[devid] with no bounds check of its own, so for a PCI device whose BDF is not described by the IVRS, the lookup reads past the end of the allocation before the caller's bounds check can run. This was harmless before commit e874c666b15b ("iommu/amd: Change rlookup, irq_lookup, and alias to use kvalloc()"): the table was a zeroed page-order allocation, so the over-read returned NULL and the caller's NULL check skipped the device. After that commit the table is a tight kvcalloc() and the over-read returns adjacent slab contents, which check_device() then dereferences as a struct amd_iommu *, causing a boot-time GPF. Seen on Google Compute Engine ct6e VMs, where the virtualized IVRS describes only the four TPU endpoints 00:04.0-07.0; the gVNIC at 00:08.0 (devid 0x40) indexes 56 bytes past the 456-byte allocation, into the adjacent kmalloc-512 slab object: pci 0000:00:04.0: Adding to iommu group 0 pci 0000:00:05.0: Adding to iommu group 1 pci 0000:00:06.0: Adding to iommu group 2 pci 0000:00:07.0: Adding to iommu group 3 Oops: general protection fault, probably for non-canonical address 0x3a64695f78746382: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.22 #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/06/2025 RIP: 0010:amd_iommu_probe_device+0x54/0x3a0 Call Trace: __iommu_probe_device+0x107/0x520 probe_iommu_group+0x29/0x50 bus_for_each_dev+0x7e/0xe0 iommu_device_register+0xc9/0x240 iommu_go_to_state+0x9c0/0x1c60 amd_iommu_init+0x14/0x40 pci_iommu_init+0x16/0x60 do_one_initcall+0x47/0x2f0 Guard the array access in __rlookup_amd_iommu(). With the fix applied on 6.18.22, the gVNIC at 00:08.0 is skipped cleanly and the VM boots. | ||||
| CVE-2026-101425 | 1 Oracle | 1 Peoplesoft Enterprise Peopletools | 2026-11-06 | 2.5 Low |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: SQR). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows low privileged attacker with logon to the infrastructure where PeopleSoft Enterprise PeopleTools executes to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 2.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:N/A:N). | ||||
| CVE-2026-99076 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-06 | 3.7 Low |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: udp: Create exceptions before socket matching Currently, when ICMPv6 Packet Too Big and Redirect Message packets are locally delivered and quote a UDP packet, an exception is only created in the IPv6 exception cache if the kernel can match the UDP packet to an existing socket. This behavior allows off-path attackers to conduct a side-channel attack on the exception cache in order to discover the ephemeral port used by a connected UDP socket. Commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()") and commit a00df2caffed ("ipv6: make exception cache less predictible") tried to mitigate such attacks by making it harder for attackers to discover hash collisions in the exception cache and by randomizing the number of exceptions a hash bucket can hold, respectively. Unfortunately, both of the mitigations can be bypassed. Instead, mitigate such attacks by always creating an exception, even before trying to find a matching socket. Do that by calling ip6_update_pmtu() and ip6_redirect(), the helpers used when the quoted packet did not originate from a socket. This means that guesses (right or wrong) from an off-path attacker will always result in an exception being created or updated in the cache that the attacker can observe. Pass the ifindex of the ingress device and the default uid, in a similar fashion to icmpv6_err(). Unlike IPv4, an oif of 0 would not match any nexthop in ip6_redirect_nh_match() and no exception would be created in response to a Redirect Message. Note that this does not allow attackers to create exceptions that they could not create before, as both helpers can already be reached with little to no validation. For example, by sending an ICMPv6 error that quotes an ICMPv6 Echo Reply or one that quotes a UDP source port that matches a wildcard socket. Also note that in the good case (matched socket) the above scheme comes at the cost of an extra route lookup, as the no socket helpers perform their own lookup before the one performed by ip6_sk_update_pmtu() / ip6_sk_redirect(). When the two resolve to different nexthops, it also results in two exceptions being created for the same destination IP. One in the exception cache of the nexthop resolved by the no socket helpers and another in the exception cache of the nexthop used by the socket. | ||||
| CVE-2026-93568 | 2 Io.netty, Redhat | 24 Netty-codec-http, Amq Broker, Apache Camel Quarkus and 21 more | 2026-11-06 | 7.5 High |
| A flaw was found in Netty. A remote attacker could exploit this vulnerability by sending specially crafted HTTP/2 or HTTP/3 Extended CONNECT requests. Netty's HTTP-object conversion path incorrectly processes these requests as regular HTTP/1.1 CONNECT requests, leading to a loss of critical protocol and path information. This misinterpretation can allow attackers to bypass security policies, such as routing or authorization logic, in applications that rely on Netty for HTTP/2 or HTTP/3 communication, resulting in integrity loss. | ||||
| CVE-2026-93567 | 2 Io.netty, Redhat | 24 Netty-codec-http2, Amq Broker, Apache Camel Quarkus and 21 more | 2026-11-06 | 7.5 High |
| A flaw was found in Netty's HTTP/2 codec. When converting HTTP/1 CONNECT requests to HTTP/2, the component incorrectly uses the Host header instead of the CONNECT authority-form request-target for the tunnel authority. A remote attacker can exploit this by supplying a different Host header, leading to a malformed HTTP/2 CONNECT request. This can bypass security controls such as tunnel allow-lists or egress policies, resulting in integrity loss. | ||||
| CVE-2026-92857 | 2 Red Hat, Redhat | 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more | 2026-11-06 | 8.1 High |
| Keycloak provides a Dynamic Client Registration feature that allows users with specific tokens to register their own applications. A flaw in how Keycloak validates these registration requests allows an attacker to create a malicious application that forges identity information. By mapping their own user profile details to protected fields like the user ID (sub) or intended audience (aud), an attacker can generate signed security tokens that make them appear to be a different user. This could allow an attacker to impersonate other users or gain unauthorized access to services that rely on these tokens for identity verification. | ||||
| CVE-2026-118394 | 1 Gitea | 1 Gitea | 2026-11-06 | 4.3 Medium |
| The OAuth2 userinfo endpoint (`/login/oauth/userinfo`) decided whether to limit the `groups` claim to public organizations by re-parsing the `Authorization` header as an OAuth2 access token instead of using the scope of the credential that authenticated the request. When a public-only OAuth2 token was sent as a query parameter or form field, or a public-only personal access token was used, that scope came back empty and the claim listed the token owner's private organizations, teams and concealed memberships. The disclosure is limited to the owner's organization and team names and memberships; no repository content is exposed. The endpoint now uses the scope of the authenticating token. | ||||
| CVE-2026-116472 | 2 Kubernetes, Suse | 2 Ingress-nginx, Rancher Prime Rke2 Ingress-nginx | 2026-11-06 | 2.7 Low |
| A security issue was discovered in ingress-nginx where a user with permission to create an Ingress may be able to cause denial of service of the ingress-nginx data plane, or possibly redirect traffic from other Ingresses. Kubernetes clusters are only affected if they are using ingress-nginx. Due to a missing check, the mirror-target Ingress annotation can be used to target an unauthenticated configuration API within the ingress-nginx controller, allowing write commands to be submitted. Corrupting the data within that configuration API results in all traffic through ingress-nginx being dropped until an Ingress configuration change or a controller restart causes the data to be recreated correctly. In principle, this write access could also be used to redirect traffic from other Ingresses controlled by the same ingress-nginx instance. In practice, there is negligible additional risk: such redirection would require privileged information about internal ingress-nginx state, and users can already redirect traffic from other Ingresses controlled by the same ingress-nginx anyway. | ||||
| CVE-2026-46350 | 1 Dcmjs-org | 1 Dcmjs | 2026-11-06 | 9.1 Critical |
| dcmjs is a JavaScript implementation of DICOM manipulation. Prior to 0.52.0, the DecimalString and IntegerString implementations in src/ValueRepresentation.js sanitize text with a permissive regular expression and pass the result to JavaScript's Number constructor without validating finiteness or the DICOM value-representation rules. Scientific notation overflow in a DS or IS field can produce positive or negative Infinity, while stripping alphabetic characters from signed infinity text can leave a sign-only string that converts to NaN. IntegerString also accepts exponent notation and values outside the DICOM signed 32-bit IS range. Applications that trust these parsed values can propagate invalid numbers into spatial geometry, display windowing, dose scaling, frame counts, rescaling, or volume reconstruction, causing incorrect calculations or disrupted processing. This issue is fixed in version 0.52.0. | ||||